[ROM][TWRP]100% Pure Stock 5.0.2 7.19.401.22 CL482424 release-keys - One (M7) Android Development

100% Pure Stock 5.0.2 7.19.401.22 CL482424 release-keys for installing in TWRP recovery​Required TWRP 2.8.5 or later​Tested on HTC One M7 Int.
Download
If you need root please flash root zip after rom installation
Root Download link http://forum.xda-developers.com/showthread.php?t=1538053
If you need feature official OTA update flash stock recovery in TWRP
Aroma stock and TWRP 2 in one​

Thanks a ton mate. :good: Will try it tonight. The last system dump by Mike1986 had problems booting. Hopefully no such issues here.

Booting and running flawless with santod mod.
Thanks artur

artur0588 said:
100% Pure Stock 5.0.2 7.19.401.22 CL482424 release-keys for installing in TWRP recovery​Required TWRP 2.8.5 or later​Tested on HTC One M7 Int.
Download
If you need root please flash root zip after rom installation
Root Download link http://forum.xda-developers.com/showthread.php?t=1538053
If you need feature official OTA update flash stock recovery in TWRP
Aroma stock and TWRP 2 in one​
Click to expand...
Click to collapse
Is this deodexed? Thank you

How does this ROM differ from your last 5.0.2 stock ROM?

quicksilver53 said:
How does this ROM differ from your last 5.0.2 stock ROM?
Click to expand...
Click to collapse
Before 7.19.401.2 and this one new 7.19.401.22

I have a HTC ONE m7 International running Revolution HD ROM , S-ON and rooted with TWRP . Can I use this to get back to stock ROM??? Will it update my baseband?

ecstasyado said:
I have a HTC ONE m7 International running Revolution HD ROM , S-ON and rooted with TWRP . Can I use this to get back to stock ROM??? Will it update my baseband?
Click to expand...
Click to collapse
Flash it with twrp, flash stock recovery and you should be good to go! You might need to relock your bootloader as you are s-on.

matekaneve said:
Flash it with twrp, flash stock recovery and you should be good to go! You might need to relock your bootloader as you are s-on.
Click to expand...
Click to collapse
Is it really necessary to relock my bootloader? I need to send my M7 to warranty and I need to flash stock ROM, but I would prefer to leave my root alone, I don't think they would care?

I would think it would depend on how you unlocked the boot loader. If you went the way I did which was through HTC's dev site, then they will have it on record that your device's boot loader was unlocked. I think they would give it an approval to do warranty work since you are being seen as a dev. They will then let you go without 'punished'. I have not had any experience with this area however, so I might be wrong, but I have seen various reports on Reddit lately where HTC has repaired M7's that were rooted and had other ROM's on them with no issue. The Redditor did however, report that it was relocked and back to 'factory' so they had to go through the process again of unlocking bootloader and so forth.

You're an angel, thank you so much for posting this rom!
My phone got soft-bricked after I took an OTA, (completely stock without root! just an HTCDev unlocked bootloader), the logcat during boot was filled with lovely reallocation exceptions, flashed your Rom through TWRP and voila! Lucky I unlocked the bootloader first thing when I got it, I even managed to retain all of my data.
Thanks a lot!

Plz i need a help i need to know all the steps to install the new update of htc m7 7.19.401.22 because i tried more one time but i fail to instal and fir the last one i fail to boot after a hard and a Complicated steps plz what shall i do to let my m7 boot after installing the stock recovry and the stock rom and downloading the update ? I do all of that but after the intalation the m7 don't boot to the system and the phone shows only htc logo nothing eles plllllz reply me soon ....

Is there a new radio in this OTA?

will the 7.19.401.2 stock recovery work on this ROM(7.19.401.22)? because i couldn't find the latest stock recovery. Just asking

leo10messi said:
will the 7.19.401.2 stock recovery work on this ROM(7.19.401.22)? because i couldn't find the latest stock recovery. Just asking
Click to expand...
Click to collapse
Latest stock recovery in first post.
Ha), somebody keep rate 1 all my thread))). Crazy man)

artur0588 said:
100% Pure Stock 5.0.2 7.19.401.22 CL482424 release-keys for installing in TWRP recovery
Required TWRP 2.8.5 or later
Tested on HTC One M7 Int.​
Click to expand...
Click to collapse
is this stock reset rom with stock radio??​

yatindroid said:
is this stock reset rom with stock radio??[/CENTER]
Click to expand...
Click to collapse
This is stock reset rom included stock kernel. No radio, no hboot, no recovery.

Thanks arthur0588, was waiting for this because OTA to 7.19.401.22 are not working for me. But the message was still present all day and remind me every 4 hours.

thanks @arthur0588.
it is real stock. work smoothly for me

Hello Everyone,
I have installed this Rom and the stock recovery and after installation i saw a software upgrade witch installed nicely. My question is now: Is my firmware upgraded now ?
Sent from my HTC One using XDA Free mobile app

Related

[Q] I need some answers about Nexus S

So I bought Nexus S from second hand recently mostly because it will get official ICS support from Google.
So because it's second hand buy, I really don't know if I'm using original bootloader, kernel, radio etc.
It's rooted (because I have Superuser app), I think it has stock 2.3.6 android (build number GRK39F) and kernel version 2.6.35.7-gf5f63ef, [email protected]#1.
Can someone who use stock android and original kernels confrime to me that this is right version?
I really want to update to ICS using incremental update which I found here (http://forum.xda-developers.com/showthread.php?t=1445635) but I'm affraid to don't screw something because of bad experience when I radio bricked my desire
Can I update it to ICS or I need to do unroot or something?
Just download the correct stock ICS rom for your device (if it is I9020T or I9023) ,put it on the SD root and then flash it using the stock or CWM recovery and be done with it (if you need the ICS)
most likely you won't be update by OTA because you are rooted (system file verification will fail)
just download stock ICS ROM and flash it ...
Ota will install fine if its a stock rom with just root. The update script basically checks that everything that should be there is there . If there is something else in there like su it don't matter.
flashing a new rom is the best way to go if you have cwm installed already
I succesfuly flashed ICS and first impressions are very good.
But I think I lost recovery...
jurvyx said:
I succesfuly flashed ICS and first impressions are very good.
But I think I lost recovery...
Click to expand...
Click to collapse
flash a CWM recovery via adb , or there is TWRP recovery in DEV section , which is very good .

[Q] loading stock firmware without screwing custom recovery

Hi... im currently running
CROMi-X v5.2.2, which is based on rom 10.6.1.27.5 with twrp 2.5.0.0 and my bootloader says is the one that came with us10.6.1.15.3-20130416...
To install omni kitkat, im been asked to have the latest bootloader, to avoid screwing up im planning on insalling the latest stock from asus...
However, each time i install a stock through twrp or cwr, the new image not only updates the bootloader and deletes all my data, but rewrites my recovery, for which then i have too reupload using fastboot to upload the recovery...
Is there any way to make sure i dont loose the recovery after flashing a stock firmware... or a way to flash the recovery from the recovery before rebooting after flashing the stock?
Thanks everyone!
mertonv said:
Hi... im currently running
CROMi-X v5.2.2, which is based on rom 10.6.1.27.5 with twrp 2.5.0.0 and my bootloader says is the one that came with us10.6.1.15.3-20130416...
To install omni kitkat, im been asked to have the latest bootloader, to avoid screwing up im planning on insalling the latest stock from asus...
However, each time i install a stock through twrp or cwr, the new image not only updates the bootloader and deletes all my data, but rewrites my recovery, for which then i have too reupload using fastboot to upload the recovery...
Is there any way to make sure i dont loose the recovery after flashing a stock firmware... or a way to flash the recovery from the recovery before rebooting after flashing the stock?
Thanks everyone!
Click to expand...
Click to collapse
Flashing the stock ROM reverts the tablet back to stock, so the recovery must go. Luckily, the bootloader you are on is compatible with the KitKat recovery (10.6.1.15.3) so you shouldnt have to flash the stock ROM at all. If you were on 10.6.1.8, you would have had to upgrade.
cmendonc2 said:
Flashing the stock ROM reverts the tablet back to stock, so the recovery must go. Luckily, the bootloader you are on is compatible with the KitKat recovery (10.6.1.15.3) so you shouldnt have to flash the stock ROM at all. If you were on 10.6.1.8, you would have had to upgrade.
Click to expand...
Click to collapse
Thanks, then guess i only need to flash the kitkat twrp...
Asked the same question about my bootloader at the omni thread to be sure, if they say that it works too, will go ahead and give it a try

[Q] Troubleshooting while updating to 4.4.4

Hi all,
Since a few days I'm trying to update my Nexus 5 to Android 4.4.4 but everything I've tryed has failed !
Today I'm running stock ROM 4.4.2 + root + TWRP recovery + Xposed
What I've tryed :
_ OTA : device reboot on recovery and does nothing
_ Flash stock using the latest Nexus Rom Toolkit from Wug Refresh : device reboot on bootloader and get stuck on a "downloading..." message while PC get stuck on "downloading bootloader"
_ Flash zip from TWRP : tryed several zip, all of them has failed
I don't know what to do next, so now I'm asking your help...
Also I hope this post is in the right section !
Download vomer's stock rooted 4.4.4 rom from the development section and dirty flash it from custom recovery. This should do the job.
You can find the mentioned rooted stock in my signature, section 6.6
Sent from my Nexus 5 using Tapatalk
Before trying this custom ROM could you explain me the difference with the stock ROM and why I cannot flash the stock one ?
Is it because I have Xposed or something ?
And also after flashing the custom by vomer, can I try to flash again the stock one ?
3RR0R404 said:
Before trying this custom ROM could you explain me the difference with the stock ROM and why I cannot flash the stock one ?
Is it because I have Xposed or something ?
And also after flashing the custom by vomer, can I try to flash again the stock one ?
Click to expand...
Click to collapse
The One which we are telling you to flash is the stock rom. Yes, it's because you have Xposed and other modules installed.. God knows what changes it has made to system.
There's no need to flash the factory images again as vomer's thread contains the stock itself.
- Sent from an IceCold Hammerhead!
3RR0R404 said:
Before trying this custom ROM could you explain me the difference with the stock ROM and why I cannot flash the stock one ?
Is it because I have Xposed or something ?
And also after flashing the custom by vomer, can I try to flash again the stock one ?
Click to expand...
Click to collapse
All of your questions have already been answered, except the Vomer ROM one. While technically a custom ROM, it is only stock ROM with root. So going back to pure stock would be pointless.
Edit: ninja by @vin4yak

[Help] Can't install custom recovery !

Hello,
I have some problem to install custom rom and recovery on samsung US device
Can I unlock bootloader for this device ? what I should do to install Custom recovery ?
Thank's
Sadly, you cannot unlock your bootloader past the 4.1.2 update (excluding 4.1.2), and the only custom recovery that works is SafeStrap. All of the ROMs you install past said update must be on the TouchWiz kernel, so there's no escape.
redusk said:
Sadly, you cannot unlock your bootloader past the 4.1.2 update (excluding 4.1.2), and the only custom recovery that works is SafeStrap. All of the ROMs you install past said update must be on the TouchWiz kernel, so there's no escape.
Click to expand...
Click to collapse
octopus82 said:
Hello,
I have some problem to install custom rom and recovery on samsung US device
Can I unlock bootloader for this device ? what I should do to install Custom recovery ?
Thank's
Click to expand...
Click to collapse
Correct but what version of Android are you on?
From my CM11 S3
I'm on 4.3
I've flashed cwm on i535 with bst tool and it worked perfectly, but with one device only
Thank you
octopus82 said:
I'm on 4.3
I've flashed cwm on i535 with bst tool and it worked perfectly, but with one device only
Thank you
Click to expand...
Click to collapse
You're going to have to provide a lot more info cuz that doesn't make sense. Flashing a custom recovery on a Verizon S3 (SCH-I535) with 4.3 or 4.4.2 causes a hard brick upon rebooting the phone.
Sent from my SCH-I535 using Tapatalk 4
ok, what can I do now to install a custom rom to get another language and get mmi code when I'm looking that ?
Thank's

Phone is S-OFFed, unlocked, rooted and TWRP is loaded...How do i install custom ROM?

I used Sunshine to SOFF it. It is unlocked and TWRPed and rooted.
I want to install a good stable custom ROM..I am looking at ViperOne M8 v6.0
Can I safely install it on my phone?
It is verizon, still on stock firmware...
elnurmen said:
I used Sunshine to SOFF it. It is unlocked and TWRPed and rooted.
I want to install a good stable custom ROM..I am looking at ViperOne M8 v6.0
Can I safely install it on my phone?
It is verizon, still on stock firmware...
Click to expand...
Click to collapse
If your phone is supported by said ROM then yes. Download and place on sdcard. Boot into TWRP recovery. Click install. Then navigate to ROM zip file you downloaded on sdcard and then slide to flash. Read the details of the ROM creator. You may need to install gapps also.

Categories

Resources