Hey Guys i Create This Thread to discuss all about this tablet
i have found a lot of information about it and i would like to share with the comunity
i'm not a developer ( but i want to become )
but well
here i'm going to be posting stuff relater to this tablet and specifically the model F
LENOVO A5500-F (WIFI-ONLY)
hacks, mods ,tutorials and everything about this tablet
feel Free to ask and comment in this thread
and WELCOME.!!
THAnkS!
XDA:DevDB Information
Lenovo A5500-F (Wi-Fi Only) Android-Development, ROM for the Android General
Contributors
Zoidiano0, Zoidiano0
Source Code: http://www.mediafire.com/download/2mgrfrr4kc6ngrk/lenovo_a10-70_a8-50_osc_20140416.tar.gz
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: KitKat 4.4.2
Based On: Cyanogenmod
Version Information
Status: Testing
Created 2015-06-06
Last Updated 2015-06-05
Root tablet
First Of all with our tablet we need ROOT
the only app that i tried and can Root The Tablet is
KINGO ROOT
DOWNLOAD
USB DRIVER
DOWNLOAD
here are the steps to do this
1.-Enable Debugg Mode inyout tablet (settings - about tablet- 7 tabs on build Number-enable usb debug )
2.- Download the Drivers
3.- Connect yout Tabler with your USB cable And Install it with the drivers
4.- Download=>Install==> Launch the KINGO ROOT APP ( LINK above)
5.- Hit ROOT and wait till The magic Happend ..
6.-Enjoy
u can also download SuperSU and set it as main root manager app
Recovery twrp 2.8.0.0
now we r going to install TWRP AS MAIN RECOVERY
DISCLAIMER:I'm Not Responsabe for any damage on your tablet or if your warantie is avoid, do this by your owm responsability
FILES TO DOWNLOAD
MTK UNCLE TOOLS
DOWNLOAD
Flashify
Download from Google Play Download
TWRP image
DOWNLAOD
ok now there si 2 methods tod install this
METHOD 1
U MOST BE ROOTED TO DO THIS
1.- Download Flashify
2.- Copy the file to the sdcard
3.-open Flashify and give it root permissions
4.- Just in case make a back up of your Stock Recovery Image
5.- flash the image with Flashify (may take 2-3 minutes )
6.- reboot to recovery and Enjoy.!
METHOD 2
U MOST BE ROOTED TO DO THIS
1.- Install Uncle MTK Tools (link Above)
2.- Copy the TWRP image to the Sdcard
3.- open Uncle MTK Tools - Engeniering - Install new Recovery and wait till ends
4.- reboot into recovery and enjoy.!
File Source: LENOVO-FORUMS.RU
if u Got any questions Jut let me know
Restore STOCK FIRMWARE
Hi Guys now i'm gonna teach you how to install the Stock Rom
this is useful when u BRINK your device
so this is a UNBRINK Procedure
DISCLAIMER:I'm Not Responsabe for any damage on your tablet or if your warantie is avoid, do this by your owm responsability
FILES TO DOWNLOAD
STOCK ROM
DOWNLOAD ROM
SP FLASH TOOLS
DOWNLOAD FLASH TOOLS
ok after you donwload all the files follow this steps
well in the file of the ROM there is all u need to install the rom
ROM - SP FLASH
but there is no the PRELOADER DRIVER so u need to download the other Flash tools to install just search it inside the folder and install it
Notice that is an UNSIGNED DRIVER so if u r using WIndows 8 or 8.1 you need to diable it after that your r going to be ok
I did it my self and it worked :good:
1.- Uncompress the Rom File
2.- Locate the Falsh Tools Inside
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3.- Open he flash tools as ADMIN
3.- Load the Scratter File To flash tools
to thispoint u had to have installed the device in preloader file
HOW>???
turn OFF Your tablet
and connect with the usb cable , soon as you plug in you will the in the Device manager an uninstalled Device as MT
5** PRELOADER or somethink like that
then install it with the driver in the flash tools folder and you are done
4.-HIT FIRMWARE UPDATE to start the instalation
5.- Connect your tablet toh the USB cable and wait till the Program ends
6.- The procces take about 5 minutes
7.- when the process finish u r goint to het a windows with a green circle and your tablet will turn off so UNPLIG THE TABLET
PRESS AND HOLD THE POWER BUTTON UTILL STARTS
8.- Wait Untill Boot Up
9.- sign in with Google And enjoy Your Tablet
Source of Files:LENOVO-FORUMS.RU
if u got a question post it and ill aswer it.!
THANKS
Inside the lenovo
ok i was doing some flashing on the devices and i freeze my tablet on the Preloader mode and i had to disamble the tablet and take the power conector out to avoid that ..
Here are some Pictures of the INSIDE
Enjoy
i noticed that there is place for a SIM CARD SOCKET
and a couple contacts in the top ( for speaker maybe)
i'm going to see what i can do with it
what about some custom roms ,thx
lollipop would be sweet
Maxx Audio Effects Mediatek Edition (by Arcatarc)
hi guys !!
as the creator of this thread i',m now bringing you this mod for our tablet
is the Maxx Audio Effects Mediatek Edition (by Arcatarc)
i tested already on my tablet and works just fine,!!
LINK TO MOD
u need the TWRP POST ABOBE to be able to install it and use it
so install it if u want to try sometring new or just if u dont like Dolby .
DOLBY SYSTEME BECOMES USELESS AFTER THIS
so keep in mind that and do a nand backup !
cheers..!!
comment if u can find any goody for this tablet.!!
ya i know im going to try to build a cyanogenmod 11 version for this tablet and then go for a 12 version but first i'm trying and lerning with my NEXUS 7 2012 how to cook a rom then i'll move forward for this lenovo .!!
Lenovo a5500 source code developers needed
hi guys
i bring you the source code for this tablet
so if anyone is a developer or know something about how to cook a rom here is what you need
LINK for SOURCE CODE
if anyone want ot try to compile anything for this tablet is WELCOME
see ya.!
Really interesting Thank you for this Information!
What about reviews?
Any one that has posted a review of this tablet? I'm considering to buy this one but not many reviews out there. I had the A1000-F but because of the USB port I have to update and planning to stick with Lenovo.
Its a good tablet
balomtz said:
Any one that has posted a review of this tablet? I'm considering to buy this one but not many reviews out there. I had the A1000-F but because of the USB port I have to update and planning to stick with Lenovo.
Click to expand...
Click to collapse
Hi.!!
well i started this thread cuz i saw that this tablet is pretty nice i mean
its 8" resolition 1200x800 (aprox)
DISPLAY
its 8" resolition 1280x800 (aprox)
full COLOR
Adnd i mean color si full vivid colors is pretty nice u can see the dislpay from any angle u want i got no distorcion or a PROTHOGRAPH-FLIM Effect
is super brigth
SPECS
Processor
CPU Mediatek MT8382
Quad-core 1.3 GHz Cortex-A7
GPU Mali-400MP2
1GB of RAM
MAIN REVIEW
to be honest quite remarcable performance u can do what ever u want and it does easily
i been using it for a out 1 year and it can handle everithing
SONIC RACING sinc the last update is not woking but i dot play too much so is not a problem to me
But my little cusings does so i have instaled a few games to let them play
i use it mostly for reading and broswing , FB , Camera, Mail Checker , music
adn like a mini laptoy i just attach my usb cable via OTG and works just fine
and as u can see u got everything to mod it ( if u r thinking aboit do it ) u got ROOT RECOVERY UNBRINK
and w hope that some developer add to this an try to compile a new rom for it ( i'm learnig how to complile to but its goint to take a wile cuz mediatec devices are a little bit tricky to do some mods, but are cool and u can test if u want cuz if u kill it u can restore via the UNBRINK precedure
the sound is not pretty loud u have to set a ew value in ingeniering mode and u get better sound and louder
( i'm goit to post how soon so if u want to buy it and u want to do so.. ))
u now were to find..
if i recomend this tablet
:good::good::good::good::good::good: YES
and one more thing u got OTA Updates So soon as u buy it u'll get updates cuz comes with JB4.2.2 and is upgrated to
4.4.2 KIT KAT
so ya lest wait till it gets the update to LOLIPOP>!! :fingers-crossed:
Drivers not working
When I try installing the drivers on my Win7 64-bit machine, it says there are no drivers available. When I've gone to the device manager and found the Lenovo device, it states that no drivers are currently installed. I've tried telling it to update the driver and manually pointed to the unzipped folder, but it says no drivers could be found. The end result is KingoROOT doesn't see the device, even if debugging mode is enabled.
Any ideas?
Jaling Orion said:
When I try installing the drivers on my Win7 64-bit machine, it says there are no drivers available. When I've gone to the device manager and found the Lenovo device, it states that no drivers are currently installed. I've tried telling it to update the driver and manually pointed to the unzipped folder, but it says no drivers could be found. The end result is KingoROOT doesn't see the device, even if debugging mode is enabled.
Any ideas?
Click to expand...
Click to collapse
well u need to install not only compressing and setting the folder
u need to install it from the .ini file so u can install it as android adb devices
i think it says android debug bridge or something try to install it that way and
it would be ok
if not let me know
hi guys well i'm here asking for help my i just brink my tablet and i cant restore it even with my unbrink procedure .. but i find a way to make it.. up and running again and is uploading a backup via twrp pls if u can upload a copy of ur backup's pls do it i want my tablet back to life
when itry to uploa the new firmware says
S_DA_SDMMC_WRITE_FAILED (3149)
if u know obut this problem pls let me know
and if someonw can pls make a full firmware dump with MTK Droid Tools
i would be nice and more usefull
thanks.!!
NEW VIDEO FLASH INSTRUCTIONS
https://www.youtube.com/embed/VzPzvckRKZ8
Does anybody have latest official A5500-F ROM?
the latest offcicial om is the one its in the link for unbrink u have to flash it and its ready to go. .
loo in the UnBrink post in the thread and u can flash it
the lates rom is kitkat 4.4.2 there is no a newer version for it cuz mediatek dont realease the firmware
Attention: the flash tool inside A5500F_A442_000_013_140526_ROW.rar is an old version. Better download latest version SP_Flash_Tool_v5.1352.01
Hi everybody!
I wonder if any of you with rooted Lenovo A5500F running Kitkat 4.4.2 can create and send me a backup (like Titanium or similar) of 4 Lenovo system apps - LenovoID, Lenovo Weather, Lenovo Weather Service and Lenovo A8-50
I'd like to return my tablet to it's original state, but have accidentally deleted those .apk files, and now factory reset cannot reinstall them
Related
I no longer have this phone (GiONEE Dream_D1), I'm also going to stay away from Mediatek SoCs.
No more support for this device in this thread. If anyone wants to take over, please do. Thanks everyone who participated and encouraged me.
Link to the stock deodexed rom available in post #2 below.
For increasing the internal storage to 2GB from 1 GB, follow the instructions by @RickyGoldsmith here http://forum.xda-developers.com/showpost.php?p=41966897&postcount=3
-------------------------------------------------------------------------------------------------------------------------------------
Stock Factory ROM root instructions:
Download the zip file named motochopper.zip from the First Post of this thread here: http://forum.xda-developers.com/showthread.php?p=40747604
Thanks and Credits to djrbliss
YOU ARE DOING THIS AT YOUR OWN RISK.
Instructions:
Extract the entire contents of the zip file.
If you are using Windows, ensure you have installed the latest MediaTek USB drivers available for your phone. Download link for the MediaTek drivers here: http://goo.gl/A7gnp
Ensure USB Debugging mode is enabled on your device.
Connect your device to your PC via USB.
Run run.bat from the extracted folder.
Follow the instructions on screen, when everything is done, the phone will reboot.
Voila! Now your Gionee Dream D1/GN878 will be rooted.
CWM Recovery for Gionee Dream D1/GN878
Steps to install CWM recovery: YOU ARE DOING THIS AT YOUR OWN RISK.
1. Install the MTK USB Drivers for the phone. If you had followed the above steps to root then You have the drivers installed.
2. Download the SP Flash tool, with the scatter file and the recovery.img. Download link here: http://goo.gl/SD9kh
CWM Version 6 available here http://forum.xda-developers.com/showthread.php?p=43039475#post43039475 thanks to @deepak2111
3. Extract the zip file and run the Flash_tool.exe
Leave all the options as default, do not tinker with any settings, except pointing to the correct scatter file.
4. The scatter file and the recovery.img are placed in a folder named DreamD1 in the extracted folder.
In the Flash tool, click on scatter-loading button and select the file named MT6589_Android_scatter_emmc_PMT.txt
The recovery will be auto selected as shown in the image below: DO NOT CHECK ANY OTHER CHECKBOXES.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Click on the Download button. DO NOT CLICK ON Firmware->Upgrade Button, it will brick your Phone
6. Remove the phone from the USB cable
7. Switch off the phone, wait till you feel the vibration. Wait for another 30 seconds
8. Now plug in the phone to the USB cable without turning on the Phone.
As soon as the phone is detected, the recovery image will be installed.
Voila!, Now you phone has CWM recovery installed.
After the recovery installation, remove the phone from the USB Cable.
To go to Recovery Mode: KeepPressing Power + Volume Up Keys. You should now be greeted with CWM recovery menu.
Please HIT the Thanks button if you feel I deserve it.
Note: Just found out that the Chinese Model number for Dream D1 is GN878
Hybrid Stock ROM De-Odexed, Zipaligned rooted with busybox - best of Primo-X1 and Dream D1
Kernel aka boot.img is included in the rom zip as we now have the MTK6589 SoC sources.
Copy the downloaded Zip to External SD Card.
Reboot to CWM Recovery
Do Factory reset.
Flash this using CWM Recovery.
Download Link:: https://copy.com/frhv3
Known Bugs:
Selecting Wallpaper from Settings->Display->Wallpaper FCs.
Please let me know, if you come across any bugs here in this thread.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
GiONEE Dream_D1 Stock deodexed ROM with root and busybox.
Copy the downloaded Zip to External SD Card.
Reboot to CWM Recovery
Do Factory reset.
Flash this using CWM Recovery.
Download Link:: https://copy.com/yRrfRMDNBE4A
MT6589 SoC Kernel source: https://github.com/varunchitre15/MT6589_kernel_source
Credits to varunchitre15 for the kernel sources.
MIUI
How about porting MIUI to start with?
I am already running MIUI Home Launcher and it is a breeze. Do you have any experience with porting ?
I looked at: http://forum.xda-developers.com/showthread.php?t=1827256 and it looks straight forward. What I am not sure is how much these applications depend on the underneath framework.. I mean, If I take all these apk and libraries, will it work on this stock Gionee Dream D1 ROM ?
somberi said:
I'm also working on porting the CWM recovery to Gionee Dream D1. Once that is completed I shall share it here.
Click to expand...
Click to collapse
waiting for CWM ,have to get rid of this rom,every hd games opens after 10minutes
million thanks
I cant believe my eyes
I am going to root that right now, but first i am going to thank you
Great job and we will wait for your new roms
thanks
RickyGoldsmith said:
How about porting MIUI to start with?
I am already running MIUI Home Launcher and it is a breeze. Do you have any experience with porting ?
I looked at: http://forum.xda-developers.com/showthread.php?t=1827256 and it looks straight forward. What I am not sure is how much these applications depend on the underneath framework.. I mean, If I take all these apk and libraries, will it work on this stock Gionee Dream D1 ROM ?
Click to expand...
Click to collapse
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.
protocolt fault
I am getting the protocol fault, waiting for device.
Any idea the cause for that?
somberi said:
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.
Click to expand...
Click to collapse
How do you intend to get the Factory Stock ROM? Rip it from the device?
I am currently trying to play with the CWM process. Will update here how it goes...
ashishsoft said:
I am getting the protocol fault, waiting for device.
Any idea the cause for that?
Click to expand...
Click to collapse
Did you install the MediaTek drivers from the link above? Make sure you dont have the phone connected in the PDANet+ (Right click on the System Tray icon and click on disconnect. Also make sure you have USB debug enabled, under Settings->Developer Options.
If all the above fail try restarting the system and try to connect the phone to a different USB port on your computer.
let me know the results.
RickyGoldsmith said:
How do you intend to get the Factory Stock ROM? Rip it from the device?
I am currently trying to play with the CWM process. Will update here how it goes...
Click to expand...
Click to collapse
Currently looking at various Chinese forums to get a proper rom backup tool for MediaTek based devices. Also have contacted Gionee India asking them to release the Factory Stock ROM and the flashtool for the device. Micromax, Lava and many other manufactures give the Stock ROM for download.
At work now and do not have access to any of the resources here..
rooted it
sorry it got that rooted!
yeah!
now waiting for the ROMS
thanks
ashishsoft said:
sorry it got that rooted!
yeah!
now waiting for the ROMS
thanks
Click to expand...
Click to collapse
Nice to know
I am your fan somberi
You are a master, !
Great job done and keep that up
:angel:
somberi said:
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.
Click to expand...
Click to collapse
Are you able to get the boot.img image dump?
MtkTools and others create a file which is just binary data.
our stock recovery is useless...pls gv us cwm and unroot.zip too....for safety...
Sent from my Dream_D1 using xda app-developers app
---------- Post added at 01:01 PM ---------- Previous post was at 12:48 PM ----------
somberi said:
Download the zip file named motochopper.zip from the First Post of this thread here: http://forum.xda-developers.com/showthread.php?p=40747604
Thanks and Credits to djrbliss
You are performing this at your OWN RISK!
Instructions:
Extract the entire contents of the zip file.
If you are using Windows, ensure you have installed the latest MediaTek USB drivers available for your phone. Download link for the MediaTek drivers here: http://goo.gl/A7gnp
Ensure USB Debugging mode is enabled on your device.
Connect your device to your PC via USB.
Run run.bat from the extracted folder.
Follow the instructions on screen, when everything is done, the phone will reboot.
Voila! Now your Gionee Dream D1 will be rooted.
Click to expand...
Click to collapse
i hv sucsfuly rooted my dvice...waiting for cwm n unroot...
Sent from my Dream_D1 using xda app-developers app
RickyGoldsmith said:
Are you able to get the boot.img image dump?
MtkTools and others create a file which is just binary data.
Click to expand...
Click to collapse
Could not get time to investigate, too much work.. Will have to spend some time this weekend.
how to install CWM recovery/4ext
hi there
after rooting the device, i have been trying to get in the recovery, i tried using CWM and 4ext both
but everytime i try go to recovery it only shows me default factory mode, that is it. nothing else
can someone tell me why and guide me
thanks
Finally managed to get CWM recovery ported to Gionee Dream D1. Testing in progress.
Works great.
The External SD card is detected.
Did a nandroid backup, restored the back up without any problems.
Did a Factory reset and worked great.
somberi said:
Finally managed to get CWM recovery ported to Gionee Dream D1. Testing in progress.
Works great.
The External SD card is detected.
Did a nandroid backup, restored the back up without any problems.
Did a Factory reset and worked great.
Click to expand...
Click to collapse
That's great news. Thanks
On my windows 7 ThinkPad, it has never been able to detect the phone over the serial console. Perhaps I'll try it on someone else's box.
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
I have followed your instructions to the word. The YGDP download program keeps getting stuck after pressing 'Apply' after selecting the CPB file and version.
Moreover, the drivers that you have given are ADB drivers. I have installed them prior to all this. But my s5+ still doesn't get detected after I connect it to my PC without the battery. It says the driver installation failed. I forgot what was the device name that was being shown.
Could you please help me out. I have accidentally deleted certain system applications and need to get them back. Thanks.
The problem seems to be about drivers, if your phone is not identified, it wont flash, as i have installed a lot of drivers, my devices was detected automatically,
also make sure opened the program with admin rights.
As I do not have the phone with me, I could not do a trouble shoot with you, try to go to device manager and update drivers manually from local folder.
dogmatism said:
The problem seems to be about drivers, if your phone is not identified, it wont flash, as i have installed a lot of drivers, my devices was detected automatically,
also make sure opened the program with admin rights.
As I do not have the phone with me, I could not do a trouble shoot with you, try to go to device manager and update drivers manually from local folder.
Click to expand...
Click to collapse
thanks. will try that. But apart from that the flashing program has an issue as well. I'm running it on a 64 bit win 7 machine and I'm opening it with admin rights as well. also I need to open it in compatibility mode for windows XP. after hitting apply on the ROM selection screen it freezes. I guess that has nothing to do with the drivers as the phone isn't even connected yet.
any idea what's causing this?
Thanks for such an informative tutorial. I have this phone. From where can I download Custom ROMs like Cyanogenmod for it? Btw, are you getting poor camera quality by any chance?
Hats off sir
Thanks Sir Thank You Very Very Much You Save My Money! Thanks sir thank you!
ROM
when will we get kitkat ROM for titanium s5 plus
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
hello frnd i have spice coolpad 2 mi 496 model. the ygdp software is compatible with this device. my question is only that if my device will brick in future than can i fix it with this software i have both ygdp software as well stock rom of my device in cpb plz tell me
karbonn titanium x stock rom
please give me the karbonn titanium x stock rom and recoveary also...:crying:
Help !!! Boot problem of karbonn titanium s5 plus
dogmatism said:
Device:
http://www.gsmarena.com/karbonn_titanium_s5_plus-5925.php
I received a karbonn devices, which was soft bricked, and did not find much assistance by contacting them.
Here is the procedure to flashing the stock 4.2.2 firmware.
Download necessary files:
1. Firmware 4.2.009.P1.131118.7295MI01
2. Flashing tool: YGDP_Setup_V3.31_131028_02_Customer
3. Drivers if required
http://www.4shared.com/folder/zSTN87aV/Karboon_S5plus.html
1. Extract the zips
2. Install the flashing tool YGDP_Setup_V3.31_131028_02_Customer.exe 9make sure you right-click and grant it administrator privilege)
3. Right-click and open as administrator the newly created YGDP icon in your desktop
Password : 9527
4. Select [config] button
5.
5.1
(see pic below) Select your firmware file which should be:
Code:
4.2.009.P1.131118.7295MI01.CPB
(note that it should end with CPB extension)
5.2
(see pic below) select customer as 7295MI01
6. Press [APPLY]
7. Select [START]
8. Connect your phone without the battery
Now the update procedure would start and when it is complete without errors disconnect, insert battery and boot your devices.
If it encounters any problem repeat the process.
Rooting:
http://forum.xda-developers.com/showthread.php?t=2572238
If that procedure fails you could use MTK rooter.
Click to expand...
Click to collapse
This is what happened.....
I um... somehow changed the fonts of my android system to segoe ui through rom toolkit lite... rebooted it.......
now, i'm only able to boot into recovery..... i.e. when i try to boot normally, it just shows the loading screen forever..
i have android system recovery 3e in my karbonn titanium s5 plus...
tried the above method........... but no use.... it kept showing some checksum error.....
i cant use adb too except for adb sideload.... which i cant as i have damn less internal memory free space
what do i do ?
p.s send any solution to this to my email :
[email protected]
ps. if possible, could you send me some roms and recoveries compatible with this phone ??? (Karbonn Titanium S5 Plus)
i searched the internet and found nothing.... if anybody happens to stumble over something for this, please send it to me. thanks in advance.
Unhappy karbonn titanium x stock rom
please give me the karbonn titanium x stock rom and recoveary also...
Click to expand...
Click to collapse
check for your device model from coolpad and download the rom from coolpad romer accordingly...
check for the roms from coolpad romer in google drive
edit 2:
thanks to Mr Shrikar Galgali who sent me the rom from coolpad romer
use this link for the original rom ....
https://tr.im/20c3b
he also sent me a few other ROMs..
Here are links for ROMs compatible with karbonn titanium s5 plus :
Sony xperia z:
https://www.dropbox.com/s/e8sq7s60de82mvl/Xperia_Z_Karbonn_S5_Plus.zip
Sony xperia z v2:
https://tr.im/ca47d
Miui :
http://www.needrom.com/wp-content/uploads/2014/03/miui_7295c_4.3.7_2c5837e511_4.2.zip
( to download this, you need to log in to needrom.com first )
Also visit these pages for more help...
https://www.facebook.com/karbonns5plus
https://www.facebook.com/karbonnroms
Note : The above posted links for roms are not tried and tested ! Be Careful !
For some of the ROM downloads, you need to log into the respective sites...
Eg: You need to log in to your google account to download the Samsung Galaxy S5 ROM and the Xperia Z v2 ROM
Thanks mainly to the thunderboys team and all other developers of the respective ROMs whom I haven't mentioned.
edit 3:
Yep. My phone is fixed....
Had to go to the service center though....
anyway.....
For all those who damaged their System UI:
Here are the SystemUI.apk and the SystemUI.odex files:
http://www.4shared.com/rar/cyMk4Dyuba/Karbonn_Titanium_S5_Plus_Syste.html
Hope it helps !
ClockWorkMod recovery for Karbonn Titanium S5 Plus :
Here is the cwmrecovery.img file of karbonn titanium s5 plus, for all those who might need it.
tr.im/RWOT
( beware, the above link is not tried and tested ! )
hope it helps !
edit 4:
The MIUI ROM and the Sony Xperia v2 ROM work properly. For people who have boot issues, doing a full data wipe/factory reset through the recovery will solve that problem... MIUI is pre rooted, but chainfire's SuperSU app is not installed and there is no keyboard app. The Sony Xperia v2 ROM has SuperSU installed and works properly. However, a high amount of patience is needed to wait for the ROMs to boot up...
As mentioned by cybercrawler, the internal/external swap supposedly works, and appears to be already applied in these ROMs... so, if you are going to flash a new ROM, you had better undo this change...
The clockworkmod recovery file works too, as seen in the screenshots uploaded by cybercrawler... thanks to him for testing that out.
I shall be uploading some screenshots of these in a few days. Both the ROMs run Android Jelly Bean 4.2.2, and the MIUI ROM has a update scheduler app, so I'm guessing it can be updated to 4.4 Kitkat. Anyway... if anybody knows how to bypass Dropbox Error 509 ( This account's public links are generating too much traffic and are temporarily disabled ), please download the Xperia Z v1 ROM and upload it to Google Drive... I shall be uploading the MIUI v5 ROM to Google Drive within the next few weeks...
karbonn titanium x
please help me how to instal karbonn titanium x stock rom...?
cen u please give me a download link...?
uinod3 said:
please help me how to instal karbonn titanium x stock rom...?
cen u please give me a download link...?
Click to expand...
Click to collapse
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
i guess so...
Invincibl3 said:
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
Click to expand...
Click to collapse
well, if you have any custom recovery images, you could do it through fastboot ( fastboot flash recovery nameofrecovery.img )
else, if you have flashable recovery zip files, you could do it through adb sideload in recovery...
try twrp recovery... touch based recoveries are good for karbonn devices
take a backup of your current rom ( and recovery if possible ) first...
make sure that you know any karbonn service centre near you who can fix your phone if it gets bricked.
( i'm telling you so because when my karbonn titanium s5 plus bricked, it took a week and a half to get the phone serviced at the service centre. )
find some roms compatible with your device, and make sure you dont install new fonts or anything like that. rooting is okay...
try this link for karbonn roms
"goo .gl/ p0QK1m"
(remove the quotes and no spaces)
oh, and does anybody have an idea of creating a one-for-all rom that would work on any android device, be it tablet or smartphone ?
it could have the most basic features and could be based on android 4.4 kitkat....
it's purpose is mainly for backup... just in case no other rom is compatible with a certain phone and you can't find the stock rom anywhere...
please reply to my gmail id if you have any idea of doing so....
rajju 3004 @ gmail . com
(remove the quotes and no spaces)
Note: Never ever change or add any new fonts to a Karbonn device...
can u give me link of custom roms for titanium s5 plus.
read my post!
anmolmatharu said:
can u give me link of custom roms for titanium s5 plus.
Click to expand...
Click to collapse
see my post on the first page !
Invincibl3 said:
have you installed some custom recovery on your phone? I also own titanium x and was wondering if you are able to do that. I can share the stock rom if you still need it.
Click to expand...
Click to collapse
yes i have a custom recovery in my phone .....
please provide stock rom or kitkat rom for karbonn titanium x mobile....
titanium x stock rom
uinod3 said:
yes i have a custom recovery in my phone .....
please provide stock rom or kitkat rom for karbonn titanium x mobile....
Click to expand...
Click to collapse
the below link is for the titanium x stock rom of android jelly bean 4.2.2
" goo. gl / 1Epkmz "
(remove the quotes and no spaces)
hope it helps !
rjt.rockx said:
the below link is for the titanium x stock rom of android jelly bean 4.2.2
" goo. gl / 1Epkmz "
(remove the quotes and no spaces)
hope it helps !
Click to expand...
Click to collapse
it is not a stock rom....:
and the proseser given in link "goo.gl/1Epkmz" was not working and it was not downloading.....
please help me....:crying:
try this
uinod3 said:
it is not a stock rom....:
and the proseser given in link "goo.gl/1Epkmz" was not working and it was not downloading.....
please help me....:crying:
Click to expand...
Click to collapse
try this :
tr.im/MMLf
it is not a rom which can be flashed through recovery...
see this for instructions
tr.im/MMUk
hope it helps !
Scatter file.
cybercrawler had asked for the scatter file of Karbonn titanium s5 plus.
well, here it is, attached to this post.
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5 (Download New Recovery image file by me from this thread)
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
baskye said:
Yeah rooted my auxus note with your guidance. Good to see that you have also shifted to iberry auxus from canvas hd. So, double excitement for me one is new phone and other is to see cmahendra with this phone. So many exciting custom rom waits for note 5.5. Thank you Sir.
Click to expand...
Click to collapse
I am glad to see first person who rooted with the help of my tutorial and files. That also confirms the steps are perfect. Actually worked for me so should work for all. Thanks a lot for your faith and trust in me. Will be around for more developement and roms.
Success!
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Using the note for about 2weeks. Rooted successfully. Titanium backup is not working properly. Any solution for it.
Also the network refresh is poor. So network switching is very slow and many times have to manually do refresh or reboot.
latest twrp recovery
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
flashing the preloader is not necessary though is it?
Yes it is not necessary
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
mojahun said:
]I have rooted by iberry-auxus note 5.5 as per your guidance.
But the USB DRIVER not correctly installed.
I have updated the driver through device manager
My operating system is windows 7 ultimate x64
Everything went smooth as you instructed
Thank you for developing this guide to root the model.
:victory:
The USB DRIVERS can be downloaded from
http://forum.xda-developers.com/showthread.php?t=2180436
Click to expand...
Click to collapse
I am not sure if above USB driver is useful or not. But when you connect MT6592 Phone to PC without Battery, the PC shows a box with
"Searching drivers for YunOS system"
and if Internet is connected , it will download a tiny driver automatically from Microsoft site for Chinese Mobile Phones and an entry in Device Manager appears like
"YunOS ACB Interface"
Now Flashing Tool will automatically connect your phone to pc on next available COM PORT (COM3 or COM4 etc.)
So it is not USB Driver. It needs YunOS ACB Driver. You can find it separately somewhere on net, if searched.
baskye said:
while browsing through elephone p2000 thread I came across this link which gives the latest twrp recovery
http://n2k1.com/n2k1/ELEPHONE_P2000/
Downloaded the 8.77 MB file flashed the recovery file alone through sp flash tools
Working fine on our auxus 5.5 note.
Click to expand...
Click to collapse
Download my version of TWRP 2.7.1.0, which is tested and works perfect, includes Mount USB Storage and you can transfer files in Recovery mode.
Ito_ said:
flashing the preloader is not necessary though is it?
Click to expand...
Click to collapse
No, Preloader is not necessary but in case it is wiped or corrupted, its good to flash the original provided by company makers. I have included all Preloaders directly from respective company stock roms
sandeep101 said:
hi mahendra .this is great .didn't expect rom development on fast track so soon .
going to root my brothers mobile with this method now but want to make sure if phone will receive updates normally after that.
thanks.:good:
Click to expand...
Click to collapse
YEAH! I am always around in XDA, for the phone in my hand Thanks for appreciation
SCATTER file and Recovery for two more clone models.
Hi A L L!!!
Posted SCATTER file and Recovery for two more clone models.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
Choose wisely.
Nothing happening
cmahendra said:
***Root with SPFT Flash Tool Method***
for iBerry Auxus Note 5.5 / Mlais Note Pro 5.5 / Elephone P2000
[EASY ROOT METHOD]
Guys. Now we have our own first Root Method for AUXUS NOTE 5.5 STOCK ROM.
Finally this root perfect root method was possible due to SPFT version of Stock Rom
Installation Instructions
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. This also breaches warranty of your phone. I am not responsible for any damages.
1) Download flashable zip file named UPDATE-SuperSU-v2.02.zip and save in root of your SDCard
2) Download and install Phone Driver / Universal Android USB Drivers (if any).
3) Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE RIGHT NOW.
3) Download and extract following TWRP Recovery Flash Package as per your model on desktop or anywhere on your pc.
------- Download for iBerry Auxus Note 5.5
------- Download for Mlais Note Pro
------- Download for Elephone P2000
4) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
5) Keep only TWO options checked (selected) as shown in following image (Preloader and Recovery). If options are not seen then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted folder. Now be sure only two options (PRELOADER and RECOVERY) selected as mentioned in following image. Unselect all other options.
Now PRESS "Download" button at top.
6) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
7) Now close program on pc and remove cable, Insert Battery and start phone in RECOVERY mode.
To start phone in recovery mode press "VOLUME UP" button and "POWER" until phone starts in TWRP Recovery mode.
8) Important: Now install/flash "UPDATE-SuperSU-v2.02.zip" in Recovery mode and Reboot phone in system (normal) mode
Done. Enjoy Press thanks if you liked my work.
IMPORTANT: The package also contains original Stock Recovery named recovery_org_stock.img. If you want to flash back to original company stock recovery, then select this file in flashing tool (Click recovery line and select this file) and then flash.
Click to expand...
Click to collapse
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Techminator said:
I followed all your steps but it's not working. When I press download button it's not flashing. I waited for over an hour.
Click to expand...
Click to collapse
Seems drivers are not properly installed. These are new drivers by iBerry.
1) Uninstall any android driver you installed before from ControlPanel/Programs. Reboot/Restart PC/Laptop
2) Install this USB Preloader Driver http://d-h.st/kcH (from iBerry)
3) Then Install this SPFlashtool Driver http://d-h.st/vRd (from iBerry)
4) Reboot PC/Laptop/Computer , Keep pc connected to Internet on all the time. DO NOT yet connect phone to pc.
5) After computer restarts Run SPFT "flash_tool.exe" and press DOWNLOAD button
6) Now connect phone (without battery) to pc. Let windows install drivers, then flashing will start in less than 5 min. Dont wait for hours.
Hope this helps and inform if works.
PS: For GOD's sake do not quote whole opening post in your queries. Do you want me to read my own thread? Hope you have read XDA basic terms and conditions.
Rooted!
cmahendra said:
Seems drivers are not properly installed. These are new drivers by iBerry.
Click to expand...
Click to collapse
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Techminator said:
Thank You, I managed to root my phone with your help Mahendra. Also, my apologies for quoting the whole post. I suppose it needs editing including driver links. I also removed SIM card from the phone before rooting.
Rooting apart, I wanted to ask if there are any advantages/differences by installing your ROM? Can I not create a ROM by taking a complete image of my current phone's state? I was thinking about Xposed Framework. Not sure but your advice would really help.
Finally, I was wondering if there are any good flip cases available online. The local stores do not have any for this brand and model as it's fairly new in the market. The one from iBerry is Rs 990 which I think is unreasonable. Any suggestions would be much appreciated.
Also, is there a way to light up the soft buttons?
Thank You and keep up the good work.
Click to expand...
Click to collapse
I dont use or recommend Xposed FW. You can use as per your requirement. Works fine.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
Yes, flip cover by iBerry is costly and even I am also looking for low-cost option.
falcon.prj said:
Is there any chance of there being a cm11 port on this phone?
I don't like the icon size on the stock ROM and Titanium Backup doesn't work
Click to expand...
Click to collapse
For icons size to change use any other launcher, like google now or nova or any other you want.
Move Titanium App to internal memory or install Link2SD, check settings and then install Titanium Backup. plz google for more info on titanium.
This is rooting tutorial. I will be happy if you stick to the rooting related questions in this thread from next time. A little XDA terms and conditions page will help a bit to you and us.
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
baskye said:
For titanium backup issues try super user app by Koushik Dutta (flashable zip file link is available in play store). First uninstall super su from the application itself. Then install super user through recovery. Ignore the warning regarding su binary.
---------- Post added at 04:27 PM ---------- Previous post was at 04:26 PM ----------
It worked for me. Just take a nandroid backup of your current rom before giving a try.
Click to expand...
Click to collapse
Thanks a lot for this good tip/method. +1 plz post link to exact file/version.
Here is the download link
http://download.clockworkmod.com/superuser/superuser.zip
Does not work
This method does not work after I download and flash with the latest firmware (13 Oct 2014) from iBerry site.
Hi,
First of all, I'm surprised that Lenovo Phab Plus has no forum section although Pahb 2 plus has.
Today I installed Xposed Alpha 3 and selected XPosed framework SDK for ARM 64 bit. It endded up to bootloop and worse I accidentally wiped my device without any backup (can't be worse than this).
I surfed the internet for almost a day and found few ROW ROMS on lenovo-forums which is russian website. Problem is it requires PC connection and my phone can not be read but in recovery mode. i.e. when I use:
Code:
adb devices
I got
Code:
1f82f24b recovery
I only get my phone recognized in recovery mode only since OS is wiped thanks to the naive I represent.
My question is:
1. Can anyone reach a zip ROM so I can install it directly from TWRP. I can transfer files to my phone when I'm in recovery mode as it is recognized as ADB Interface
2. Does ROW ROM require my phone to be in another mode other than recovery as I failed to get Download_with_partition.cmd to work although as I mentioned adb devices command returned my device ID and recovery word.
Your help is appreciated
Solution
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
New clean install guide needed
Hai..
My phab plus spec
Model : PB1-770M
Soft ver : PB1-770M_150814
Android ver : 5.0.2
My problem is :
- infected by virus/malware (popup ads)
Need to fresh install stock rom.
I already download the stock rom you give.
How to install new clean rom, and how to make new clean partition.
Pls teach step by step.. till finish..
Note : my phab plus still can running as normal, only problem with malware/virus (popup ads). Already factory reset, but still same.. i think it need to newly installed stock rom.
Help needed, and really appreciate.. thanks
Hazeriff said:
Hai..
My phab plus spec
Model : PB1-770M
Soft ver : PB1-770M_150814
Android ver : 5.0.2
My problem is :
- infected by virus/malware (popup ads)
Need to fresh install stock rom.
I already download the stock rom you give.
How to install new clean rom, and how to make new clean partition.
Pls teach step by step.. till finish..
Note : my phab plus still can running as normal, only problem with malware/virus (popup ads). Already factory reset, but still same.. i think it need to newly installed stock rom.
Help needed, and really appreciate.. thanks
Click to expand...
Click to collapse
Is your phone rooted ? No popup could be that severe unless it is rooted. Also you may first update it to 5.1.1 from phone update in settings. If it gave you "network fails", it is OK. Lenovo service is down in some countries, so install cloud VPN from google play store, run it, then go again to update phone and it will work.
If factory reset doesn't work, it means your SD card or internal storage has some infected files. Use Kaspersky mobile security to scan your device.
wbadry said:
Is your phone rooted ? No popup could be that severe unless it is rooted. Also you may first update it to 5.1.1 from phone update in settings. If it gave you "network fails", it is OK. Lenovo service is down in some countries, so install cloud VPN from google play store, run it, then go again to update phone and it will work.
If factory reset doesn't work, it means your SD card or internal storage has some infected files. Use Kaspersky mobile security to scan your device.
Click to expand...
Click to collapse
Yes, mine is rooted..
I already take out sdcard.. & factory reset.. result still same..
I even try install av, so many av i try.. even kaspersky..
Yet, result still same.. av cannot catch/detect it.. it just says normal..
Many things has been done, clear cache, web browsing history.. whatever i already try..:crying:
I belive i need to fresh install stock rom with new partition..
Only thing is, i dont know how to do it on lenovo..
I only know on samsung using odin...
Really, really need help here...
Hazeriff said:
Yes, mine is rooted..
I already take out sdcard.. & factory reset.. result still same..
I even try install av, so many av i try.. even kaspersky..
Yet, result still same.. av cannot catch/detect it.. it just says normal..
Many things has been done, clear cache, web browsing history.. whatever i already try..:crying:
I belive i need to fresh install stock rom with new partition..
Only thing is, i dont know how to do it on lenovo..
I only know on samsung using odin...
Really, really need help here...
Click to expand...
Click to collapse
Hmmm...
Anybody care for help?
Xda experts..??
Hazeriff.. this pop-up comes up when you are browsing, you can just ignore it.. Its just a false pop-up
Normally you dont get pop-up like these on Android
Hazeriff said:
Hmmm...
Anybody care for help?
Xda experts..??
Click to expand...
Click to collapse
Thanks dude!! You saved my butt. This is exactly what I needed and worked perfectly.
You are a legend!
wbadry said:
After posting the thread, I found that stock rom:
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
wbadry said:
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
Hello to all.
unfortunately lacking all the commands of the txt file.
You can post all commands?
thank you
---------- Post added at 12:56 PM ---------- Previous post was at 12:44 PM ----------
wbadry said:
After posting the thread, I found that stock rom:
Lenovo Phab Plus Stock ROM 5.1.1
It is the best ROM that it actually worked. When you extract it, you will find download.cmd. To make it work, I had to enter command line by line. Eventually it worked.
Few tips:
1. Make sure your command window is "administrator"
2. Go to "E:\Lenovo Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW" (my location) and click ctrl+shift+right mouse click and choose "Open command window here" as shown here:
Then open Command.bat located in same file using right click--> edit and execute commands on command window line by line:
Hope it helps others to make their life much easier than this horrible day
Click to expand...
Click to collapse
please help me because i have brick my LENOVO PHAB PLUS
thanx it's work with me
frimware flashed
i need your help. its urgent. i am having lenovo phab plus but it is not working,
problem is os wiped, wrong flashing, even logo is not coming, if you have any solution for this please let me know on my email address
[email protected].
humble request. please
Thanks brother,I think i try 50+ sites and finally your one is working for me
bro can you help me to fix my phab plus
udhay441 said:
Thanks brother,I think i try 50+ sites and finally your one is working for me
Click to expand...
Click to collapse
bro can you help me to fix my phab plus i brick my phab plus, and everytime i do the fastboot it always say that tz.bmn is error can u help me
you guys, rock
Hi, thanks for the ROM file, unfortunately, even if everything goes well, my PB1-770M will stay in the bootlop
I do not even get into recovery, I do not even see the indication when the charger is connected. Perhaps the motherboard is damaged, right?
Flash official Rom for Lenovo push plus -770M
Firmware File
Search
Home☰
Lenovo Phab Plus PB1-770M
Home > Lenovo > Lenovo Phab Plus PB1-770M
On this page, you will find the official link to download Lenovo Phab Plus PB1-770M Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, which contains Flash File, Flash Tool, USB Driver and How-to Flash Manual.
Download Lenovo Phab Plus PB1-770M Stock Firmware (flash file)
File Name: Lenovo_Phab_Plus_PB1-770M_USR_S000169_151229.zip
File Size: 2 GB
How to Flash: Follow Tutorial
Firmware Link: Click here to Start Download
Download Firmware
Download Flash Tool
Download USB Driver
For PC Software
How to Flash
Step 1: Download and extract the Lenovo Phab Plus PB1-770M stock firmware package on your computer.
Step 2: After extracting the package, you will be able to get the Firmware File, Flash Tool, Driver and How-to Flash Guide.
Step 3: Install the provided USB Driver on your Computer, and if in case USB Driver is already installed, SKIP this step).
Step 4: Follow the How-to Flash Manual to Flash the Firmware on your Lenovo Phab Plus PB1-770M Device.
Follow Detailed Guidelines
Readme Once:
[*] Take a Backup: If you are going to flash the above Firmware on your Lenovo Phab Plus PB1-770M device, then take a backup of everything as because your personal data will be deleted after flashing the stock firmware.
[*] The firmware shared on this page is officially released by the company and helps you to recovery your device if you ever got bootloop, software error, update error, hanging and dead issue.
COMMENTS
Site Links
Donate
Privacy Policy
Contact
Trending
Alcatel Firmware
Samsung Firmware
Vivo Firmware
Connect
RSS
Facebook
Made with ♥ in Spain | Powered by BlueHost
Copyright © 2014-2018 Firmware File. All Rights Reserved.
low internal memory after flafsh lenovo pb1-770m
dear friends
i used the stock rom that you share it.
i flashed my lenovo pb1-770m with it.
but i found my internal memory changed to 1.6G
I ONLY HAVE 250MB FREE MEMORY.
please help me.
what i must be do for this problem?
thaks
mazvir said:
dear friends
i used the stock rom that you share it.
i flashed my lenovo pb1-770m with it.
but i found my internal memory changed to 1.6G
I ONLY HAVE 250MB FREE MEMORY.
please help me.
what i must be do for this problem?
thaks
Click to expand...
Click to collapse
I had the same problem and I solved it by installing TWRP and resizing /data partition via it.
Downloaded the above FW successfully but when I followed the step-by-step guide, I got this error message:
==================
PS C:\Users\HP_AIO\Downloads\Lenovo\Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_1
60420_ROW\SW> adb reboot bootloader
adb : The term 'adb' is not recognized as the name of a cmdlet, function, script file, or
operable program. Check the spelling of the name, or if a path was included, verify that the
path is correct and try again.
At line:1 char:1
+ adb reboot bootloader
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Suggestion [3,General]: The command adb was not found, but does exist in the current location. Windows PowerShell does not load commands from the current location by default. If you trust this command, instead type: ".\adb". See "get-help about_Command_Precedence" for more details.
PS C:\Users\HP_AIO\Downloads\Lenovo\Phab Plus\PB1-770M_5,1_S405_160420_ROW\PB1-770M_5,1_S405_160420_ROW\SW>
=============================
I am on Windows 10 and it's Windows Power Shell that popped up.
Any help, please?
Thank you.
This is good I have Lenovo PB1-770N and work for me just I connect my phone and open the zip then I go to SW folder and press "Download.cmd " and ebriting go by self,lol them flash by self we don't need do anything lol. Thanks for the good rom.
NOTE: don't turn off your phone just connect and press " Download.cmd" file
So sorry to say this but this only method works in WINDOWS 7 and for Marshmallow ROM ONLY
Supported Devices: Oppo F3 Plus (CPH1613EX) & Oppo R9s Plus (CPH1611EX)
Caution:
Please disable Antivirus for any false Detections
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
TWRP Recovery:
1. Download Drivers and install them (Disable Signed Driver Enforcement)
https://drive.google.com/open?id=1T6MTq1upNt_yxrPD9MfOHR8vTOzRisvs
2. Download Oppo R9s Plus/F3 Plus Marshmallow Firmware (CPH1611EX_11_A.16_180106) and Extract it using Winrar/7-zip into a seperate FOLDER
https://drive.google.com/file/d/1xo-J5Pe65-fXyJbysVrAZYQ1mocfl53s/view
2.1 Also Download Oppo A57 Firmware and extract it anywhere you like
https://drive.google.com/uc?id=0B_0XnEjFCVsPWndzSnp2YTFYSkU&export=download
3. Download TWRP Recovery - Keep the recovery img in the same folder as of extracted firmware folder and make sure recovery file name is set to "recovery.img"
Twrp 3.1.1-0 (Latest) - Material Theme and Inbuilt Super SU Root available for easy rooting BUT Chinese language
Download and Extract only recovery.img and place it under firmware folder. u can delete other files.
https://drive.google.com/file/d/1gkNNx2Ik6oRF-juBDNIilDUu31w6_oI_/view?usp=sharing
To change the chinese language to english please download and flash this zip But in English language you will not get Super SU Root option to root the device from built-in twrp. you have to download SU zip now. So root directly from chinese language and then flash the english language zip to be on safe and easy side
https://androidfilehost.com/?fid=817550096634752414
Twrp 3.1.0-0 (old) (RECOMMENDED) -
Normal appearance of twrp and no inbuilt SU (sometimes it prompts to install SU, if you decline once, it won't prompt again) and totally English language. Most importantly you can flash opposite OTA updates (ozip) via this twrp
https://www.dropbox.com/sh/qbobokagdgme2oa/AABQBtKTmbwChne9z1DaayHca?dl=0&preview=recovery.zip
4. Run the MsmDownloadTool from A57 Firmware folder and you will get Session Timeout error. just ignore it and close the software
4.1. Now run MsmDownloadTool from our F3 plus firmware folder and uncheck "Reset After Download"
5. Switch off ur Mobile and Hold Vol down + Vol Up simultaneously and Plug the usb to pc
5.1 After plugging to pc, open device manager and expand PORTS section and make sure the device is detected as "Qualcomm HS-USB QDLoader 9008 (COM xx)". if not you have drivers issues!
6. Press F5, uncheck all options except Recovery and double click on Recovery option and select the recovery.img from firmware folder.
7. press Start and Flashing will be success (Green color message). press stop and unplug the usb
8. Press and hold Vol Up and Power Button and release them when it vibrates. NOW IMMEDIATELY after seeing oppo logo AGAIN PRESS Vol up + Power button to Power Off your device to prevent booting!!!! (If you fail to turn off your device, mobile will boot and will auto restore the stock recovery. so you will have to re-flash the twrp again)
9. Now press Vol Down + Power button to Enter into TWRP
BONUS - Stock Recovery & New OTA Update
Stock Recovery build: CPH1611EX_11_A.16_180106
https://drive.google.com/open?id=1u2Td1g93FwyAdPuKYNqz_iMHAYMpwrwJ
New Build Version: CPH1611EX_11_A.18_180413
Flash this zip via twrp. if it gives error 7 please ask in comment section
https://drive.google.com/open?id=1UA_DEjSQ4ESQO22VuvEpBsZhW9UepafY
else, flash this ozip from stock recovery
https://drive.google.com/open?id=1u2R65wYrLy2zqIhjww8adYWkqBjXgdq3
ROOTING
Screenshot: No more red line
Boot into TWRP by Holding Vol Down + Power Button
TWRP 3.1.1.0 - Go To Advanced option (Last but one option), Tap on last option: Super SU Root and Swipe to flash
UNROOT: just uninstall the SuperSU app to remove root
TWRP 3.1.0.0 - Download this zip and copy to storage and flash it
https://drive.google.com/open?id=1dIa9jRgh5Jy_cayM4QuOw8nL8ma574jU
UnRoot: Open SuperSU>Settings>Full UnRoot.
Note: After Rooting via twrp your device might reboot twice. dont worry. its not a bootloop. its a sign of success
XPOSED FRAMEWORK - Fix Red Statusbar Warning
Screenshot:
1. Download and add extension (.zip)
https://www.dropbox.com/s/e35zeqf619...bar FIX?dl=0
2. Boot into TWRP and flash the xposed framework zip and reboot (Reboot will take about 15mins. Please dont think its a Bootloop. Have a nap)
3. Install XposedInstaller 3.1.1 apk AND Hookcoloros_1.1_2_new.apk
4. Open ColorsOs3.0 app and make sure all the options (toggles) in chinese are Enabled or leave it as deafult or if you know chinese you can choose what you want
5. Open Xposed Framework > Modules > Enable ColorOs module that you have installed now
6. Reboot. Thadaaaa. No more Red warning statusbar
Note: Flashing Xposeduninstall zip will uninstall the xposed framework. Also, if something went wrong and gone bootloop after installing the xposed framework then use this uninstaller zip to fix the bootloop. bootloop wont occur but just telling this on safety thing
Video Tutorial:
https://www.youtube.com/watch?v=T6yQWCSLZt4
Optional:
IMEI Backup
goto twrp and backup EFS partition
you can also backup using this easy method via pc : https://forum.xda-developers.com/on...click-backup-restore-efs-oneplus-one-t3150883
CREDITS:
Xda, Baidu, bbs.7to.cn
used couple of links and very useful thread: https://forum.xda-developers.com/android/help/how-to-root-oppo-r9s-plus-cph1611-t3609586
@Rimo4099 for sharing 100% working twrp recovery.img
@john_david9000 - For sharing valuable information
@wuxianlin - He is the one who ported twrp :fingers-crossed:
@cjkimlaysico - he gave the instructions to run the msm tool (hard part)
does this have the red line on the notification bar after root anymore? recommend me sth we can do after root this phone pls ty so much ☺
verydp1 said:
does this have the red line on the notification bar after root anymore? recommend me sth we can do after root this phone pls ty so much
Click to expand...
Click to collapse
yes, Statusbar will turn into Red saying Root is enabled but i havent tried fixing by myself
However i have found a way to FIX IT <3
Please check the OP again. im updating the fix
i can't access the download link for msm download tools, help pls sir
shepherd80 said:
i can't access the download link for msm download tools, help pls sir
Click to expand...
Click to collapse
damnnn. something is not legal by sharing that specific file maybe bcoz of paid or cracked content. idk
first please try to flash with stock msmdownloadtool.exe which u get by extracting firmware. if it doesnt work then you need cracked msmdownload tool
iHeymanth said:
yes, Statusbar will turn into Red saying Root is enabled but i havent tried fixing by myself
However i have found a way to FIX IT <3
Please check the OP again. im updating the fix
Click to expand...
Click to collapse
ty so much. and btw show me sth we can do after root :fingers-crossed:
and is this similar to remove the yellow line "develope mode..." ?
verydp1 said:
ty so much. and btw show me sth we can do after root :fingers-crossed:
and is this similar to remove the yellow line "develope mode..." ?
Click to expand...
Click to collapse
show you what ? i dont understand ur first line.
yes, similar to remove the yellow line but not yellow line. just similarly red line will remove. we can also remove the captcha codes and yellow warning lines of developer options etc.. im figuring out to test in f3 plus
iHeymanth said:
So sorry to say this but this only method works in WINDOWS 7 and for Marshmallow ROM ONLY
Caution:
1. Please disable Antivirus for any false Detections
2. After getting Rooted, the statusbar will turn into Red cautioning about root access
check the screenshot
Note: Downloading Firmware is an Optional thing to Install only Recovery. If you want to install both Rom and Recovery then Download the firmware files too
TWRP Recovery:
1. Download Drivers and install
https://drive.google.com/open?id=1T6MTq1upNt_yxrPD9MfOHR8vTOzRisvs
2. Download Oppo F3 Plus Marshallow Firmware and Extract it using Winrar/7-zip into a seperate FOLDER
https://drive.google.com/open?id=0B5ZISKae4wQKeEdfbGNOT3lDa28
3. Download the Tool. zip (extract it) and Recovery.img and place it under the Firmware's FOLDER (step2)
msmdownloadTool link is down. find the cracked tool in google or crack the stock tool manually by this tutorial : techzai.com/crack-msmdownload-tool/
https://drive.google.com/open?id=13AKVz94x6w4-GaSnPTXzgCoGjwm2QqpQ
4. Switch off ur Mobile and Hold Vol down + Vol Up simultaneously and Plug the usb to pc
5. Run the MsmDownloadTool and Load the extracted Firmware from folder (.ofp)
6. Press F5, uncheck all options except Recovery and double click on recovery to Browse the recovery.img
7. press Start and Flashing will be done.
Holding Vol Down + Power Button will boot into Recovery
To Avoid Signal Loss/ IMEI Missing in future, please boot into twrp and take a backup of EFS Partition
ROOTING
Boot into TWRP by Holding Vol Down + Power Button and Flash the SU or Magisk
find the zip somewhere in xda. i will post it later. sorry
Please check the Video tutorial for this Rooting process
I will try to post a clean video tutorial. stay tuned!
FIX to Red Statusbar Warning (Screenshot)
1. Download the zip below and extract them
https://drive.google.com/open?id=1hVLLigAks6ltcHrPL21L5hqDgkUKSwv5
2. Boot into TWRP and flash the xposed framework zip and reboot
3. Install XposedInstaller 3.1.1 apk AND Hookcoloros_1.1_2_new.apk
4. Open ColorsOs3.0 app and make sure all the options (toggles) in chinese are Enabled
5. Open Xposed Framework > Modules > Enable ColorOs module that you have installed now
6. Reboot. Thadaaaa. No more Red warning statusbar
Note: Flashing Xposeduninstall zip will uninstall the xposed framework. Also, if something went wrong and gone bootloop after installing the xposed framework then use this uninstaller zip to fix the bootloop. bootloop wont occur but just telling this on safety thing
Video Tutorial:
https://www.youtube.com/watch?v=T6yQWCSLZt4
CREDITS:
Xda and Developers who made all these zips/apks
@Rimo4099 for sharing the 100% confirmed recovery.img, video tutorial, screenshot and installation steps
@john_david9000 - For sharing valuable information to confirm the source of this recovery img
@Wuxalin - according to info that John david provided me, i believe this recovery is exactly same as OPPO R9S recovery by wuxalin
Click to expand...
Click to collapse
Thank you for the mention, honestly I just said a few details only. We need people like you to shed some light on these unloved phones. XDA community thanks you heartfully for your contribution.
The only thing I can say is : Go Forth, and plant the Nougat to the ground herewith. . . . . . . . . . . . . . . . It's time for Nougat to be rooted.
Also just like to confirm that MSMDownloadTool works for Windows 10 too, as proved by this article and video : http://www.techzai.com/crack-msmdownload-tool/
john_david9000 said:
Thank you for the mention, honestly I just said a few details only. We need people like you to shed some light on these unloved phones. XDA community thanks you heartfully for your contribution.
The only thing I can say is : Go Forth, and plant the Nougat to the ground herewith. . . . . . . . . . . . . . . . It's time for Nougat to be rooted.
Also just like to confirm that MSMDownloadTool works for Windows 10 too, as proved by this article and video : http://www.techzai.com/crack-msmdownload-tool/
Click to expand...
Click to collapse
i think i have the nougat recovery. testing in progress now. will let you know
edit: tested nougat recovery of r9s/r9sk but FAILED
tested windows 10 method of flashing via MiFlash tool. flashing goes success but mobile keeps vibrating but no life
tested twrp 3.1.1.0 and 3.1.0.0. both are working fine but the latest twrp is in chinese language. will figure out to change its language
only windows 7 with msmdownload tool method is working.
Good news:
Root > Magisk v16.0(latest stable) is working flawlessly
Will update OP with magisk installation steps
note: backup ur internal memory in advance xD xD
Hi, i recently update my oppo F3 plus (CPH1613EX_11_A.18_180413 marshmallow), and i try to root it using this method, it's always boot on the stock recovery when i finish (i did step by step every single world you said).
I think that's a security renforcement about this version of colorOs, i wonder if there is a way ton downgrade to the last version without losing my data (lots of apps), because i did root it whit the version that i had once.
Thanks you
Re: So, i flashed my oppo with the msmtool that you put on your post (all images expect datauser partition), and changed the recovery image before the phone boots..... and it woorks perfectly now.
PS: dont upgrade to the version CPH1613EX_11_A.18_180413 if you want root your phone, it won't work.
EniMaX said:
Hi, i recently update my oppo F3 plus (CPH1613EX_11_A.18_180413 marshmallow), and i try to root it using this method, it's always boot on the stock recovery when i finish (i did step by step every single world you said).
I think that's a security renforcement about this version of colorOs, i wonder if there is a way ton downgrade to the last version without losing my data (lots of apps), because i did root it whit the version that i had once.
Thanks you
Click to expand...
Click to collapse
Did you uncheck "Reset After Download" option in msmtool ?
No, i didn't ; in all case i didn't let the phone boot after passing the recovery.img.
Wich version of rom do you have please ?
EDIT: when i downgrade the rom, it worked perfectly
NB: after downgrading , the first time, the phone boot directly and it was the new version (wich causes me problems) that was on it, even when i had flashing all the system
EniMaX said:
No, i didn't ; in all case i didn't let the phone boot after passing the recovery.img.
Wich version of rom do you have please ?
Click to expand...
Click to collapse
1. U need to uncheck reset after download option to not let the tool to reboot it phone into os
2. I have upgraded to a.18 build via ota 65mb and root worked. Tested with my own hands
3. Caution: if you dont CHECK userpartition in msmtool, after reboot it asks for Android password to proceed and we don't know that password. It's a checkmate. You need to wipe everything to boot
4. If you have patience please flash Magical 16.0 and test it. For me Wi-Fi is not turning on after flashing magisk.
5. I suggest you to use the twrp 3.1.0. bcoz the latest 3.1.1 does not flash oppo ota (.ozip)
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
EniMaX said:
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
Click to expand...
Click to collapse
I forgot to take backup of that 65mb Ota. Sorry. I will restore stock recovery in sometime and will download that 65mb ota
Does our oppo camera supports camera2api feature?
okay thanks you. if you are talking about the "expert mode" , yes the feature is on it
EniMaX said:
okay thanks you. if you are talking about the "expert mode" , yes the feature is on it
Click to expand...
Click to collapse
I have enabled it to check pixel cameras to work but failed.
also if ur willing to do then please enable multi window in ur rooted marshmallow (build prop and developer mode method)
I tried but no multi window option enabled in recent apps
EniMaX said:
Thank you for replying, can you please sent me a link for this OTA updates , beacause the one which is proposed for me on my phone weights 1.7Gb , and the only link i found is on a vientnam website wich doesn't work (probabely because i'm in algeria lol)
Click to expand...
Click to collapse
OTA link for CPH1613EX_11_A.18_180413 (65mb)
Can use this 65mb ota if you are in A16 or A17 build versions
https://drive.google.com/file/d/1u2R65wYrLy2zqIhjww8adYWkqBjXgdq3/view?usp=drivesdk