Database Info

Soft Bricked worng TWRP ugh

I have been using chromi-x 5.2.4 w/ rom2sd for a while http://forum.xda-developers.com/showthread.php?t=2425383&page=178. I just realized today that my tablet's TWRP wasn't working properly and if I were to pull my sd card, I couldn't boot from my internal storage so I decided well I might as well try the new 4.4 http://forum.xda-developers.com/showthread.php?t=2686235. So I see it needs the newest bootloader (which is already on there I am using 10.6.1.27.5. but I realize I am running twrp 2.5.0.0. I go to the website and quickly update it TO THE JB VERSION....NOOO WHY DID I DO THAT! ( o well too late now).
I can get my tablet to recovery, but nothing will mount. Now i try to go into fastboot and neither of my comps that previously recognized the device are able to do anything (will not bootload from sd or from internal). Can't get my tablet to appear after dling univeral drivers. Anyone have the asus drivers that I can dl? Saw a few posts about unzipping two packages. I could only find the suite on the website and that is not recognizing my device. My comp tries to find them, but it fails by the time my tablet bootloops. I believe I can dig myself out of this and will read in the meantime, but I've already spent too much time on this tonight and the US lost in the last minute so I am not a happy camper!
If i type fastboot devices, I do see my serial (which I thought was a good sign and it would be a quick fix just flashing the new twrp). Doesn't recognize any commands in this post like I was trying to follow http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
[UPDATE] since twrp was asking for a password after flashing so many different versions (not sure where it went wrong) I decided to flash cwm recovery and all was well. Wiped everything. Got CM up and running in no time. Now onto crombi-kk to try it out.

[Q] SOLVED: Help - KitKat upgrade from stock... ish.

So, I did a stupid thing this morning. I spent the last, probably, five hours backing up all of my apps and data from my TF300, and once that was all done, I wiped the data on my tablet. "What makes that stupid?" What makes that stupid is, it was a miracle that I ever actually managed to root this thing in the first place, and now, I don't know a) if it's still rooted (I doubt it), and b) if I'm even mentally capable of rooting it again (I doubt it).
So, here's my situation, and if someone could just dumb down the steps for me and point me in the right direction, that's all I need. I got my tablet, I don't know, probably early 2012. I can tell you that the tablet is on ICS 4.0.3, and the build number is 9.4.3.29-20120511. It's also unlocked, I don't know if that needed to be mentioned. Now, things are better since I wiped the data on this mother, but ICS, on this tablet in particular, is slow as balls, and I'm done with it, I want KitKat. But I am so far beyond lost after what I did that if I try to work my own way out of it, I'm going to brick this thing.
I wiped the data because I was trying to do something involving the Fastboot menu or something like that. Whenever I selected the USB icon and hit up on the volume strip, the tablet just locks cold. I figured whatever caused that, would probably go away with a data wipe. It didn't. So now my data's gone, my apps are gone, my tablet's not rooted anymore, I have no idea how to get to KitKat, I can't sleep at night, it burns when I pee... let's focus on the tablet stuff for now, I'm signed up to some forums for the other stuff.
I know most of the people that read this topic will be inclined to say, "You're an idiot, read this, this, and this, and take care of it yourself." I know I'm Androidiot, and I'm humbly asking for help. Again, I'm just petrified of following the wrong topic and ruining the whole thing, so if someone could tell me how I'd go about upgrading my tablet from stock ICS to KitKat, I'd appreciate the hell out of it.

Just a little bump, not too big... no love for Tim?

Normally, you need to install the latest stock ROM from ASUS in order to recover a functional device & by the way upgrade your bootloader.
Things done, you can proceed to install recovery and kitkat.
Better explanations here : http://forum.xda-developers.com/showpost.php?p=53738192&postcount=2

zlazaar said:
Normally, you need to install the latest stock ROM from ASUS in order to recover a functional device & by the way upgrade your bootloader.
Things done, you can proceed to install recovery and kitkat.
Better explanations here : http://forum.xda-developers.com/showpost.php?p=53738192&postcount=2
Click to expand...
Click to collapse
Thank you, Zlazaar!
Well, it seems that after my device was wiped, it still didn't remove CWM as a bootloader or whatever, I don't know what I'm saying. When I hold down the power and volume down buttons, I could wait like ten seconds for fastboot, or I could tap vol up to enter the "RCK" menu. I don't know what that means. But I go into it, and I'm at the CWM menu, I think it was 5.5.0.4. You probably know better than me if I need to do anything further than that with CWM, but I should be good on that, right?
I'm almost going to go to the sites that you mentioned to download files and get more information on how to use it all. I appreciate your help, because without it, I'm sitting on an unrooted stock ROM with only most of my apps, because oh yeah, like 70 apps forgot to transfer with that backup I did... so, whoopee.
Thank you again, buddy!

The goal is kitkat, right ?
So, in order to get it you need 2 important things :
1- The latest bootloader, yours can't handle kitkat.
2- a custom recovery supporting kitkat, i.e i'm using TWRP 2.7.1.0 (link in my signature), your CWM is outdated.
The only way i know to update the bootloader is to flash Stock ROM via fastboot as described in tutorial.

I got some really stupid questions... apparently it's been entirely too long since I've messed with any of this.
What's a bootloader? I know mine's unlocked, but I didn't know there were versions of it. Is it the blob file I got from Asus?
And I have my tablet hooked up to my PC, it's on the fastboot menu wait for input from USB. When I go to the command prompt, I've tried to push TWRP to the device, but when I start a command with "adb push," it just tells me that it doesn't know what to do with that command. Same thing happened with fastboot, but then I realize I didn't have fastboot installed, so I tried to install it and it complained about a missing dll file on my computer, and I think I'm about ready to give up. lol

Here is the driver : Universal Naked Driver
After install, you can use fastboot and complet other steps.

Tim 13 said:
I got some really stupid questions... apparently it's been entirely too long since I've messed with any of this.
What's a bootloader? I know mine's unlocked, but I didn't know there were versions of it. Is it the blob file I got from Asus?
And I have my tablet hooked up to my PC, it's on the fastboot menu wait for input from USB. When I go to the command prompt, I've tried to push TWRP to the device, but when I start a command with "adb push," it just tells me that it doesn't know what to do with that command. Same thing happened with fastboot, but then I realize I didn't have fastboot installed, so I tried to install it and it complained about a missing dll file on my computer, and I think I'm about ready to give up. lol
Click to expand...
Click to collapse
Ok Tim so the GOAL IS: 4.4 KITKAT CORRECT?
This is the process overview. This is a review.
Step 1 Upgrade the bootloader. Why? Inorder to flash a 4.4 rom you need a Jelly Bean 4.2 bootloader. How? Do as zlazarr suggests by flashing the lastest stock version V10.6.1.27.5 on your tf300t. Flashing the latest stock rom will update your bootloader. And here's another helpful guide.
http://www.theandroidsoul.com/how-to-restore-asus-transformer-tf300t-back-to-stock/ Remember that the SKU has to match!
Step 2 Follow this guide.
http://www.transformerforums.com/fo...nstall-roms-tf300-jelly-bean-kitkat-roms.html
It guides you on how to unlock your bootloader which you already have and it shows you how to install twrp. After installing twrp MAKE A BACKUP!
NOTE: If using the command method on the link fails repetitively use the app rashr to install the twrp version in the link
Step 3 Upgrade twrp to vr 2.7.0.0 or higher. Refer to step 2 link on the post about 4.4 kitkat.
Step 4 Install a 4.4 kk rom. I recomend the lastest snapshot of Cyanogen Mod 11. The download is on their wiki.
And then your done! Don't give up! The hardest part I find is using the command prompt! Look for work arounds. AND SEARCH FOR METHODS!
Goodluck

b..c said:
Ok Tim so the GOAL IS: 4.4 KITKAT CORRECT?
This is the process overview. This is a review.
Step 1 Upgrade the bootloader. Why? Inorder to flash a 4.4 rom you need a Jelly Bean 4.2 bootloader. How? Do as zlazarr suggests by flashing the lastest stock version V10.6.1.27.5 on your tf300t. Flashing the latest stock rom will update your bootloader. And here's another helpful guide.
http://www.theandroidsoul.com/how-to-restore-asus-transformer-tf300t-back-to-stock/ Remember that the SKU has to match!
Step 2 Follow this guide.
http://www.transformerforums.com/fo...nstall-roms-tf300-jelly-bean-kitkat-roms.html
It guides you on how to unlock your bootloader which you already have and it shows you how to install twrp. After installing twrp MAKE A BACKUP!
NOTE: If using the command method on the link fails repetitively use the app rashr to install the twrp version in the link
Step 3 Upgrade twrp to vr 2.7.0.0 or higher. Refer to step 2 link on the post about 4.4 kitkat.
Step 4 Install a 4.4 kk rom. I recomend the lastest snapshot of Cyanogen Mod 11. The download is on their wiki.
And then your done! Don't give up! The hardest part I find is using the command prompt! Look for work arounds. AND SEARCH FOR METHODS!
Goodluck
Click to expand...
Click to collapse
Okay, so I've started work on this finally, but I think I might be having some trouble. I flashed the latest stock ROM onto my baby and restarted the tab like the article said, but now it's taking a very long time to load. I don't know if it's supposed to be taking this long, considering I'm pretty sure it wiped the data on it (flashing a ROM wipes data, doesn't it?), so I'd assume that removing the weight of those apps would make startup lightning quick.
I have the ASUS logo and the spinny circle. And it's just spinning and spinning and spinning and spinning. Is this a problem?
I'm going to let it spin spin spin spin spin for like five more minutes, and then I might go cry for a while.
EDIT: I cried too soon, it loaded for a long time then came to a menu that says "Android is upgrading..." and it's optimizing the apps, or apptimizing, that were apparently NOT wiped when I flashed a new ROM. lol, so I'm back on track. So far, so good. Thank you for the detailed guide, I appreciate it!
Further edit: And I'm also done rooting and flashing to KK 4.4. Thank you for dumbass-proofing the process for me, it is incredibly highly appreciated. I didn't kill my tablet!

Tim 13 said:
Okay, so I've started work on this finally, but I think I might be having some trouble. I flashed the latest stock ROM onto my baby and restarted the tab like the article said, but now it's taking a very long time to load. I don't know if it's supposed to be taking this long, considering I'm pretty sure it wiped the data on it (flashing a ROM wipes data, doesn't it?), so I'd assume that removing the weight of those apps would make startup lightning quick.
I have the ASUS logo and the spinny circle. And it's just spinning and spinning and spinning and spinning. Is this a problem?
I'm going to let it spin spin spin spin spin for like five more minutes, and then I might go cry for a while.
EDIT: I cried too soon, it loaded for a long time then came to a menu that says "Android is upgrading..." and it's optimizing the apps, or apptimizing, that were apparently NOT wiped when I flashed a new ROM. lol, so I'm back on track. So far, so good. Thank you for the detailed guide, I appreciate it!
Further edit: And I'm also done rooting and flashing to KK 4.4. Thank you for dumbass-proofing the process for me, it is incredibly highly appreciated. I didn't kill my tablet!
Click to expand...
Click to collapse
Hi Tim13,
I'm glad to hear that everything went well and my guide helped you!:good: And to answer your question flashing doesn't wipe your data. You have to manually wipe it. And lol:laugh::good: that you didn't kill your tab. I hope you find your tab faster and useful again!

It's just as slow and useless as it was. But honestly, the flashing process was fun, and I learned from it. Plus, TWRP and Cyanogen mod are awesome, and now I know that. lol

Great to see you up and running @Tim 13 :good:
Can you add SOLVED to the thread title
Thx Josh

No, I'm not gonna do that.
I'm just kidding. You're all right, darling. :good:
Edit: Actually, not being a douche, I can't figure out how to edit the thread title. I went to edit the first post and I can't change the title of the post... I'm gonna look around for how to do it a bit more but after that I'm gonna go to bed.
DOUBLE EDIT: Got it, as you can see. Thanks to all that helped out!

Bootloop 2013 Moto G Boost Mobile XT1031 8GB

Hey guys!
To start, I want to say what an amazing place XDA is and how much information and knowledge you can get from here and how awesome the moderators are. I don't think I could ever find another amazing and/or helpful community such as those found here! Thanks to all who have helped me out with my Android issues!
Now to my issue and I apologize ahead of time if there is another thread (or related thread) found in the forum.
As the title states, I have a 2013 Motorola Moto G XT1031 Boost Mobile device. I had upgraded it to Lollipop 5.0.2 or 5.1 when it came out (I can't remember which one it was) and I had then decided to root it. I can say that I believe I was successful in rooting the device because I was able to install Supersu and use RootChecker to verify the install. Everything was going okay until i decided to research and eventually install a custom recovery and attempt to install a custom ROM. Well, let's just say that the recovery install was a bust...
In doing my research for a custom recovery, I found that TWRP had a custom recovery for my phone and apparently for my firmware via TWRP's app on the Play Store. So, I searched for my device in their in-app search for a custom recovery, downloaded it and installed it from the app. Now, my gut told me that this probably wouldn't work and that I should probably be installing a custom recovery via CLI. Nope. I didn't do this. Instead, like I said, I installed a custom recovery from the app itself. That screwed things up for me. I have no idea if it was the install, but my phone began to act incredibly strange. When in the TWRP recovery, my screen had this line that would continuously scroll from top to bottom. It wasn't a completely solid line, but it was transparent, almost like an empty thermometer glass stick was going down the screen. It was weird and not normal. I figured the phone's software was partially broken. It only did this in the TWRP recovery. Nowhere else did this happen. It was slightly annoying.
Later on I decided to install a custom ROM. Again, I did the necessary research to find out if there were any ROMs available for my phone (using XDA of course and others) and found that there were a few out there. So, I downloaded one (wish I could remember which one) and attempted to install it...keyword there. After attempting the install, my phone would not boot. Like at all. Dead. So back to the drawing board I went to try and reverse the damage. Using XDA (ironically) and a plethora of other sites, I tried to resurrect my phone and bring it back to life. After countless hours of trying and trying and trying and more and more research, I just gave up. The phone is dead. Great. $170 spent on a phone to break it a year later.
It's been roughly 4-5 months since I have attempted to redo the process and after another minor attempt, somehow I was able to remove the root completely, including the custom recovery and ROM. I don't know what the heck I did, but it worked....sort of. The phone is now stuck in a bootloop on the logo and sometimes the "bootloader has been unlocked" screen when try and factory reset the phone from the default recovery. When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set and to have this and that. I have this and that installed on my PC, but obviously cannot enable USB-debugging which is needed for ADB and fastboot to recognize my device.
So, my question for anyone who would like to help me out is this: what are my options? Is the phone recoverable? Is there any way I can get ADB/fastboot to see my device and finally install the stock firmware on the phone? I have the proper drivers installed and ADB/fastboot are on my PC. Any help would be amazing, even if you have to tell me to junk it.

blckdragn22 said:
When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set
Click to expand...
Click to collapse
This is incorrect, where did you read that? To reinstall the stock firmware using fastboot, you must be able to boot to the bootloader menu only.

I heard this from a few websites actually, although I could never find a situational fix for my phone. I am trying to restore back to Lollipop without a custom recovery, because within the past hour I found out TWRP was never fully removed when I tried booting into recovery from the AP Fastboot menu when doing to power+vol down option. The TWRP logo shows for about 10 seconds and then the phone tries booting normally, showing the unlocked bootloader warning.
So, yes I can boot into the bootloader menu all day long with no problems. It's just an selection I make doesn't get me anywhere. My question I guess now is: how do I go about reinstalling stock firmware via the bootloader menu. I have Minimal ADB and Fastboot installed on my PC. If I need the full ADB, I can download that. And of course I'd need the firmware, too.

You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795

_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
This thread had the firmware I was looking for thank you. I believe I have the flashing stock firmware process down, I hope. I'l refer to the guide if I need help. Thank you so much!

_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
I am trying to follow the steps listed here http://forum.xda-developers.com/showthread.php?t=2542219&page=35 and for some reason I cannot run any of the commands pertaining to the sparsechunks. This is what I get:
Is there anything you could tell me about that?
Edit: I was able to figure what the issue was when trying to write the sparsechunks. I had to insert a "." after 'sparsechunk' because that is how the file is named in the folder. However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?

blckdragn22 said:
However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
Click to expand...
Click to collapse
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).

_that said:
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
Click to expand...
Click to collapse
I will try that. There was a ...sparsechunks.0 as well apart from sparsechunks.1, sparsechunks.2 and sparsechunks.3. Shall I include that, too?
And adding the screenshot was an amateur mistake. My bad.

@_that this worked like a charm. Phone is 100% working ans usable now. Incredibly helpful. Thank you so much!

Updating advice please ! Reroot failure

Hi everybody ! Ill try to keep it simple as I'm sure its covered somewhere but here goes ....
Ive been using my shield portable, rooted, for ages now no problems.
Like many Ive updated it in short ever since nothing whatsoever has worked properly , most annoyingly the screen doing backflips when you go near it and hundreds endless strange updates when rebooting.
Anyway I don't think you or I or any of us want to waste time trying to figure out why its done any of this but I just want to be able to fix it. I guess I'm going to have to start again somehow! its worth noting here that all my backup apps like Helium now don't seem to work.
After the update I of course ReRooted and it appears fine from boot loader , still says unlocked. but upon usage its clearly very confused about whether its rooted or not !
In short its useless. Advice please My kung Fu warriors
May your arrows fly straight and true

I have no idea about the various issues, but I would perform a factory reset, and clear cache and dalvik cache using at least 3 swipes per each function. The method of rooting I recommend is by flashing a zip of SuperSU from a custom recovery menu. CWM or TWRP are both available for the NSP. After flashing SuperSU, when you reboot and go into SuperSu you'll see that it's installed (locked down tighter) as a system app.
Downloads:
SuperSU (latest stable version) v2.65
CWM Recovery Menu (latest version) v6.0.4.4
TWRP (Modified recovery (based on TWRP v2.8.7.0)
Sorry. This is the best I can offer you right now. If this doesn't work I would reflash the stock images of whatever OTA you wanna be on. The images can be found @:
SHIELD Open Source Resources and Drivers. You'll need at least the platform-tools portion of the Android SDK (to use Fastboot to flash from recovery). A user friendly PC app that can basically do all this sort of stuff is Shield Ram v1.1. You might find that easier to use.
Oh and here's the latest Minimal ADB and Fastboot Drivers installer [v1.3.1]
If you need further help, let me know.

Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again

[/COLOR]
Marrhead said:
Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again
Click to expand...
Click to collapse
Yeah, pretty much the rule is generally "as long as you can still see the screen, it's probably fixable". Sounds to me like your best bet, would be to download the OTA you wanna be on, and flash a new install to your Shield. It's the quickest way from A-B. I'm about 99% sure that this would solve the problem (as long as you re-root it properly). Though if you have your reasons, you can try some of the other things first. You're welcome and let me know how things go!

So where does one get the latest OTA?
cheers

Marrhead said:
So where does one get the latest OTA?
cheers
Click to expand...
Click to collapse
I did link up the main Nvidia page that would lead to the OTA images, but here's a direct link to DL just the OTAs:
Edit: you can get there through the link I included in my previous post: SHIELD Open Source Resources and Drivers. I'm having issues with editing posts, and all sorts of odd **** with the link trying to post a more direct link. It's an Nvidia site, just scroll down to Shield Portable Recovery OS Images (something like that).
Unfortunately there are only Linux and Windows downloads available. I'm not sure what your best option would be, as you have a Mac. You could contact Nvidia support, and see what they say about it. Sorry, but I don't think I can probably help much more than this.When I contacted Nvidia support about a year ago, they were pretty helpful. Hopefully you get this sorted soon. Oh and the OTAs are flashed via a terminal/command prompt. So if you can emulate DOS on your Mac (which I don't see why not...DOSbox? maybe) then that sounds to me like the solution.

Ok , hit another brick wall. Im using a windows computer now, followed all the instructions i can find, and now the bootloader seems dysfunctional.
Ive got adb and fastboot and its recognising the device but once rebooted into bootloader which loads fine, the commands say no device found and nothing works in this mode.
If i hit recovery mode then a little dead android appears! poor little guy.
I tried shield ram but it had same problems, seems to run fine but cant find shield once its in bootloader...
Ive got the image zip of the update i want to flash but no idea if im doing it right- not sure how to use it.
Help!

(HELP!) Phone Stuck In TWRP

Hello,
the long and short of it is that I tried to root my phone and then install Lineage, but ended up with no OS and now I can't use my phone. I simply want any OS so that I can use my phone. Any help would be greatly appreciated. I am a bit new to this kind of stuff, so I apologize in advance if I don't know some of the technical terms.
I am using a Samsung Galaxy S7 SM-930W8.
A bit more in detail:
I used two videos on youtube. 1 to teach my how to root, which got me into an OS. Then I used a video to teach me how to install Lineage, and that's when it all failed. After this, my phone was stuck in a never-ending loop of a circle going across a line and it never recovered.
I still have access to the TWRP when I hold down Vol-Up, Power and Home but when I try to reboot, it tells me there is no OS installed. I can't even use the recovery option, since I believe I deleted all the previously installed recoveries.
I feel silly for being in this predicament, but I would be so grateful for any help, folks!
-New2S7

New2S7 said:
Hello,
the long and short of it is that I tried to root my phone and then install Lineage, but ended up with no OS and now I can't use my phone. I simply want any OS so that I can use my phone. Any help would be greatly appreciated. I am a bit new to this kind of stuff, so I apologize in advance if I don't know some of the technical terms.
I am using a Samsung Galaxy S7 SM-930W8.
A bit more in detail:
I used two videos on youtube. 1 to teach my how to root, which got me into an OS. Then I used a video to teach me how to install Lineage, and that's when it all failed. After this, my phone was stuck in a never-ending loop of a circle going across a line and it never recovered.
I still have access to the TWRP when I hold down Vol-Up, Power and Home but when I try to reboot, it tells me there is no OS installed. I can't even use the recovery option, since I believe I deleted all the previously installed recoveries.
I feel silly for being in this predicament, but I would be so grateful for any help, folks!
-New2S7
Click to expand...
Click to collapse
Hello, no need to panic, the blue circle over the line was Lineage first boot up, it can take 10-15 mniutes on the first time. If you waited longer than this then maybe there was a problem.
If the Lineage ROM is on your SD card you can try to flash it again and see if it boots this time, sometimes it needs to be flashed twice to work. You must make sure it's the right one for your device.
If it still doesnt work then you will need to flash the stock firmware back to your device with ODIN. This is the firmware for your device >>>>HERE<<< Pick your network provider or an "unknown" version which is unbranded stock firmware. The download is a little slow but it's free.
There's lots of guides how to flash firmware with Odin, it's very easy.
I forgot to mention TWRP is a much better Recovery Option so yes when you instal TWRP the stock recovery won't boot.

cooltt said:
Hello, no need to panic, the blue circle over the line was Lineage first boot up, it can take 10-15 mniutes on the first time. If you waited longer than this then maybe there was a problem.
If the Lineage ROM is on your SD card you can try to flash it again and see if it boots this time, sometimes it needs to be flashed twice to work. You must make sure it's the right one for your device.
If it still doesnt work then you will need to flash the stock firmware back to your device with ODIN. This is the firmware for your device. Pick your network provider or an "unknown" version which is unbranded stock firmware. The download is a little slow but it's free.
There's lots of guides how to flash firmware with Odin, it's very easy.
I forgot to mention TWRP is a much better Recovery Option so yes when you instal TWRP the stock recovery won't boot.
Click to expand...
Click to collapse
Hello cooltt,
I was able to fix my problem an hour or so ago, but thank you for your calming post anyway.
For future threads, here is what I did:
1. I downloaded a stock OS and then extracted all the md5 files. (There is an md5 file for the "BL", "AP", "CP" and "CSC" fields in Odin.)
2. I then used Odin and after it detected my device, I plugged the 4 files in the appropriate fields.
3. I then hit start and it restored my phone back to a functional state.
Though I spent the last 20ish hours in a panic, I actually managed to achieve the goals that prompted me to try and install a custom rom: fewer stock apps and no Samsun Account bothering me all the time.
Thank you all for your concern.
-New2S7
(P.S. I do not know how to mark this as solved. If an admin comes across this, please mark this as solved!)