Database Info

[Q] I think I killed my Nexus S! Please help! (unlocking process/rooting stuff)

So, this is what has happened so far:
I googled for a small and easy to follow guide to unlock my phone so that I can later on install a custom rom. I followed the steps provided here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/
What I didn't notice on the first place was the "UPDATE: DO NOT FOLLOW THIS GUIDE INSTEAD Please see new root method which works on all Nexus S and Nexus S 4G!" link. Don't ask why - really don't know.
The result was having my Nexus S stuck on a screen that shows Google logo on the middle and an unlocked padlock on the bottom.
It seemed, or to be exact, I figured out that, the problem was the .img file mentioned on some point in the middle of this.. tutorial.
So, I decided to follow the newer guide that can be found here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Although all went well (didn't have to go all over the same processes up to the .img installatin point), I ended up with the same screen that shows Google logo on the middle and an unlocked padlock on the bottom.
I figured out that I could just install a rom at this point, and decided that I should go back to stock. So, I followed this guide here:
http://nexusshacks.com/nexus-s-hacks/how-to-unroot-nexus-s-i9020ti9020ai9023/
But, when I choose to install the .zip file, I get this error:
assert failed: "getprop ("ro.product.device") == "crespo" || "getprop ("ro.product.device") == "crespo"
E: Error in /sdcard/i9020t_i9023.zip
(status 7)
Installation aborded
..let me add to this point that I have bought my Nexus S from EU, it is an i9023. Let me also add that all I wanted is to flash an ICS rom and I think I have ended with a f****d device I don't know what to do with!
Any help, really, would be so much appreciated since I need to use this phone. I have a backup for calls etc but I need some smartphone features!

I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.

nickmv said:
I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.
Click to expand...
Click to collapse
Yes, I can enter this menu - there already. My model is an i9023GSM.

OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?

nickmv said:
OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?
Click to expand...
Click to collapse
You gave me the good news so, thank you for that. Now, I should follow this guide and come back in case I have a problem.
As far as the rom, I wanted to flash an ICS since I cannot wait any longer for Google to release the official update. But right now, anything that can get my device up and running would be really good!

Edit: nvm. >_<

kijp15 said:
Why don't you just use shabby's one click root. Simple & much easier. Saves all sorts of troubles.
Click to expand...
Click to collapse
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!

nickmv said:
but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
Click to expand...
Click to collapse
OK, stuck already. On Part 2 what I understand is that I have to open the CMD and copy-paste the path to the "tools" folder? Because this is what I do, and after - since this is what I have understand - I type "fastboot oem unlock" and I get "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
What do I do wrong?
EDIT:
Tottaly stuck on Part 2. It seems that there is no fastboot.exe file inside "tools" folder. I don't think the problem is something else - I'm sure I give the right commands since I tryied for fun another folder I have with fastboot.exe inside and it worked - to be exact it just gave me a FAILED messsage since device is already unlocked. Plus, regarding Part 3, Step 1, the first file for download is missing so I used the second link and downloaded 5023-cyan file. Hope this was a right move to do.
EDIT 2:
Ok, here is the story so far: I followed the guide given step by step. The USB drivers has been installed correctly so the device can be connected to the PC.
In the "tools" folder there was no such fastboot.exe file so I manually added one that I've found on the newer guide given on the 1st post. The unlocking process is failing because the device is already unlocked.
I did manage to install after this, the 5023-cyan.img file since this is the only link working from Part 3, Step 1. This gone well too!
Now, I couldn't go on with Part 4, I mean, I could not install the .zip file as it describes so through recovery mode I installed the .zip file succesfully (confirmation message to Nexus S screen).
I reboot and still get the same Google logo on the middle and an unlocked padlock on the bottom.
I cannot understand what I do so wrong? Oh, I'm so disappointed..

OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?

http://forum.xda-developers.com/showthread.php?t=1063664 or use ROM manager and select Stock ROM (you should then receive OTA upgrades to 2.3.6).
On the latter: You colud just back up different ROMs and switch between them using CW.

skatastamoutrasas said:
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!
Click to expand...
Click to collapse
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness

mixtapes08 said:
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness
Click to expand...
Click to collapse
Can you give me a CM9 kangs link since as new here, I'm kinda lost?

Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?

skatastamoutrasas said:
Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?
Click to expand...
Click to collapse
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img

kijp15 said:
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img
Click to expand...
Click to collapse
Worked just fine! Thank you!

skatastamoutrasas said:
OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?
Click to expand...
Click to collapse
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.

nickmv said:
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.
Click to expand...
Click to collapse
It did worth the hassle, that's for sure. Now I think it's so easy to unlock a Nexus plus I now have a little more knowledge regarding Android .
I will stick with CM 2.3.7 as it looks just fine. I don't care about warranty, I don't think I will ever need the official service for a software issue. Now I have to re-install my apps, re-sync my accounts and setup the phone the way I want it. It will take a little more time.
But I'm glad that I pulled this through - with your help of course! Guys, you rock!
I wish that I'll be as helpful as you at the near future.

Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
MAKE SURE THAT YOU HAVE CLOCKWORKMOD PERMANENTLY INSTALLED BEFORE DOING THIS. It saves time if you mess up. Also, make sure you get the latest gapps HERE
Instructions:
1. Go to clockwork recovery
2. Select data/factory reset/wipe
3. Select clear cache as well
4. Adv Mounts and Storage > wipe /system (note, this wipes android off the phone. It's a good idea since youre going from ver 2.x to 4.x)
5. Choose "flash from zip" (or whatever it's called.....NOT flash from update.zip)
6. Flash the cm9 update file first, then flash the kernel of your choice, then flash the gapps file.
7. Back out of the menu and select reboot.
Take note though, that the new ICS OS has incompatibilities with certain apps while GPU rendering is turned on, etc. It'll prob reboot on you sometimes, etc. For the most part it's stable, but that's completely subjective.
If you do run ICS, make sure you turn on GPU rendering in Dev Options. It takes full advantage of the GPU for UI animations, etc. Sometimes there's a stray app here and there that doesnt play nice, and you'll notice if the window looks really tiny or funny. Turning it off will fix the problem.

nickmv said:
Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
Click to expand...
Click to collapse
Two questions:
The link you give me to download the ICS rom keeps loading for ever. So, I choosed this one instead:
http://forum.xda-developers.com/showthread.php?t=1356228
Right or wrong thing to do?
It it essential to install a custom kernel? I ask because I forgot to copy/paste the .zip file and due to lack of time, I procceded without it, installing the ROM and G-APPS.

[GUIDE] T-Mobile US One S - How to ROOT and flash ROMs

So I know there's been some controversy and scares going around about the US version, since it JUST came out. I'm here to calm you guys down. I have now rooted mine, flashed an interim CWM touch version (not permanent) and have flashed a ROM......ALL successfully.
Here's what I did:
UNLOCKING:
Unlock your bootloader by registering at HTCdev.com and following the unlock instructions. Under device, choose "All other devices", as the One S is not yet listed. It'll walk you through getting your unlock token and flashing it.
ROOTING
Follow Paul O Brien's instructions on rooting your phone. I flashed the r3 superboot file he had. The first time it didnt take and just booted the phone back up. Second time it took, and seems to have stuck, at least for apps. Please note that my phone says *TAMPERED* along with the *UNLOCKED* notification. I have no idea what that means exactly, but everything works great for me.
This means if you dont want to leave Sense but want to get the tons of useless and annoying T-Mobile and other bloatware apps out, you can. T-Mo are dicks and make almost 100% of the apps on it by default SYSTEM apps, therefore unremovable. So you'll need root and Titanium Backup to freeze or delete them. I'd recommend freezing the non-TMo one's just in case.
FLASHING ROMS
1. Flash Paul O Brien's intermin CWM touch version. You MUST use this interim CWM version for the moment, as the others do not work properly. Some things like USB mount dont work in this interim version, but the important functions like wipe and flash, backup and restore, and restart do work. The CWM recovery seems permanent, based on my initial trials, so no worries about reflashing it each restart.
2. Flash your ROM of choice from Clockworkmod Recovery. I'm using Black Dragon right now, but there are others out there as well. I'm personally looking forward to CM9, but its a little ways away, usability-wise.
So there you have it, all you US guys. Don't be afraid to mod your phone. Remember all the warranty void disclaimers as always. I'm not responsible for you bricking your phone. This is just my experience in just under 24hrs of use. Things are looking good for the One S.

bump... i see US users still asking.
Mods, can we perhaps sticky this post of mine? I don't want to take credit for the actual methods of rooting, since Paul O Brien and others deserve that credit, but I think it'd be helpful for US users, since many don't know whether or not the international method works.
That, or perhaps editing the Intl guides to make it clear that the US version accepts the same methods and ROMs.

Worked great for me
Sent from my HTC VLE_U using xda premium

So if we root and flash a custom ROM is there any way to get the phone back to factory state, and get rid of the *TAMPERED* and *UNLOCKED* notification??

Did anyone else get a bit of a sad chuckle out of the first step in the instructions being "remove and reinsert battery"?

cyberchuck9000 said:
Did anyone else get a bit of a sad chuckle out of the first step in the instructions being "remove and reinsert battery"?
Click to expand...
Click to collapse
Great, now my blisters on my fingers will heal.
But still.... I cannot imagine not needing a batt pull.

nickmv said:
Mods, can we perhaps sticky this post of mine? I don't want to take credit for the actual methods of rooting, since Paul O Brien and others deserve that credit, but I think it'd be helpful for US users, since many don't know whether or not the international method works.
That, or perhaps editing the Intl guides to make it clear that the US version accepts the same methods and ROMs.
Click to expand...
Click to collapse
+1

androidcues said:
Great, now my blisters on my fingers will heal.
But still.... I cannot imagine not needing a batt pull.
Click to expand...
Click to collapse
If you need to perform a hard reset on the One S, you hold down the power button for about 7-10 secs.

First of all, thanks for this thread...I used the HTC One S All in one tool kit to unlock my phone, unfortunately I miss understood one of the directions(#5) and stopped using the tool kit and followed another thread, much to my surprise, my bootloader is unlocked, hooray My question is, how do I get back to the original state if that is possible? The reason I ask, is I would like to go back and do it correctly...I used better terminal emulator to see if I had root, but all I got was the $ sign instead of the # sign So I would like to start over...
Thanks in advance for the help

I'm honestly not sure what the procedure is for relocking an HTC bootloader. Perhaps do some Google research on some of the latest models, and I bet you'll find something.
That being said, once you unlock the bootloader a single time, the best you can do is go to **RELOCKED** state. You'll never get back **LOCKED**. Once it's gone it's gone. I'm curious about the **TAMPERED** message though. That's an ugly word.

not sure what exactly went wrong.
somehow flashed CWM and now thats the only thing my phone will boot to, even after re-flashing the stock recovery.
can't get the phone to turn on, only CWM every single time.

suhailtheboss said:
not sure what exactly went wrong.
somehow flashed CWM and now thats the only thing my phone will boot to, even after re-flashing the stock recovery.
can't get the phone to turn on, only CWM every single time.
Click to expand...
Click to collapse
Uh oh that doesn't sound good
Sent from my HTC VLE_U using xda premium

yeah, tried reflashing both CWM & stock recovery. phone still boots to CWM everytime.
Luckily i can still access the phone via ADB, (while in recovery) so i'm sure i'll be able to sort it out. just need to take a fresh crack at it tomorrow. gonna switch back to my galaxy nexus tonight. (oh wait, i dont have any other phones that use microsim)
haha.

Hmm, interesting. Did you flash the interim recovery that Paul O Brien posted, and not another version? Just wanna make sure. I've heard of this happening in my past experience with the Nexus S, but I can't recall what the deal was. Regardless, I don't think you're in trouble. As with your GNex, it's very hard to completely brick the device unless you flash perhaps a bad hboot file, however I'm not really familiar with HTC devices.
This is my first HTC so I'm still trying to learn how the hboot and other processes work together. Sry to hear you had bad luck.
UPDATE: You should try the root install script. It tells the phone to boot after install. That might get you booted atleast.
Some thoughts:
1. Flash the stock recovery back and reflash CWM
2. Clear cache and dalvik within CWM, and make sure to use the 'Reboot System' option if you aren't already.
From what I can tell, your "boot-to-recovery" flag is set on the phone, and isn't getting cleared.

nickmv said:
So I know there's been some controversy and scares going around about the US version, since it JUST came out. I'm here to calm you guys down. I have now rooted mine, flashed an interim CWM touch version (not permanent) and have flashed a ROM......ALL successfully.
Here's what I did:
UNLOCKING:
Unlock your bootloader by registering at HTCdev.com and following the unlock instructions. Under device, choose "All other devices", as the One S is not yet listed. It'll walk you through getting your unlock token and flashing it.
ROOTING
Follow Paul O Brien's instructions on rooting your phone. I flashed the r3 superboot file he had. The first time it didnt take and just booted the phone back up. Second time it took, and seems to have stuck, at least for apps. Please note that my phone says *TAMPERED* along with the *UNLOCKED* notification. I have no idea what that means exactly, but everything works great for me.
This means if you dont want to leave Sense but want to get the tons of useless and annoying T-Mobile and other bloatware apps out, you can. T-Mo are dicks and make almost 100% of the apps on it by default SYSTEM apps, therefore unremovable. So you'll need root and Titanium Backup to freeze or delete them. I'd recommend freezing the non-TMo one's just in case.
FLASHING ROMS
1. Flash Paul O Brien's intermin CWM touch version. Some things like USB mount dont work, but the important functions like wipe and flash and restart do. The CWM recovery seems permanent, based on my initial trials, so no worries about reflashing it each restart. I cant speak for the non-interim solutions, but from what I can gather, they are problematic, so avoid them for now.
2. Flash your ROM of choice from Clockworkmod Recovery. I'm using Black Dragon right now, but there are others out there as well. I'm personally looking forward to CM9, but its a little ways away, usability-wise.
So there you have it, all you US guys. Don't be afraid to mod your phone. Remember all the warranty void disclaimers as always. I'm not responsible for you bricking your phone. This is just my experience in just under 24hrs of use. Things are looking good for the One S.
Click to expand...
Click to collapse
Is this part a must? Would you mind PM'ing me with how to do this part if it's a must? I have Unlocked and rooted my phone, just waiting for a good ROM to come by.

Thongvilay said:
Is this part a must? Would you mind PM'ing me with how to do this part if it's a must? I have Unlocked and rooted my phone, just waiting for a good ROM to come by.
Click to expand...
Click to collapse
That step is only if you want to flash ROMs, or need to wipe cache, dalvik, etc. CWM is used for flashing and recovery/backup purposes. If you're not using ROMs yet, then you have no need for it.

nickmv said:
Hmm, interesting. Did you flash the interim recovery that Paul O Brien posted, and not another version? Just wanna make sure. I've heard of this happening in my past experience with the Nexus S, but I can't recall what the deal was. Regardless, I don't think you're in trouble. As with your GNex, it's very hard to completely brick the device unless you flash perhaps a bad hboot file, however I'm not really familiar with HTC devices.
This is my first HTC so I'm still trying to learn how the hboot and other processes work together. Sry to hear you had bad luck.
UPDATE: You should try the root install script. It tells the phone to boot after install. That might get you booted atleast.
Some thoughts:
1. Flash the stock recovery back and reflash CWM
2. Clear cache and dalvik within CWM, and make sure to use the 'Reboot System' option if you aren't already.
From what I can tell, your "boot-to-recovery" flag is set on the phone, and isn't getting cleared.
Click to expand...
Click to collapse
thanks for the tips, i had tried clearing cache/dalvik within CWM and it still would not work. and yes i did flas the interim CWM from paulobrien
luckily the phone would work via ADB while in CWM. So i pushed three different ROMS to the phone, at first each oen would lock up and reboot within 20 seconds of doing anything. I then went back into recovery & wiped data/cache/dalvik maybe 10 times out of sheer frustration. Then re-flashed a fresh copy of black_dragon_v4.0, didnt do anything after boot. just let it sit there till this morning.
now the phone seems to be working perfectly...
so hopefully if anyone encounters this problem my last couple posts will help them out!

suhailtheboss said:
thanks for the tips, i had tried clearing cache/dalvik within CWM and it still would not work. and yes i did flas the interim CWM from paulobrien
luckily the phone would work via ADB while in CWM. So i pushed three different ROMS to the phone, at first each oen would lock up and reboot within 20 seconds of doing anything. I then went back into recovery & wiped data/cache/dalvik maybe 10 times out of sheer frustration. Then re-flashed a fresh copy of black_dragon_v4.0, didnt do anything after boot. just let it sit there till this morning.
now the phone seems to be working perfectly...
so hopefully if anyone encounters this problem my last couple posts will help them out!
Click to expand...
Click to collapse
Wow, I have no idea dude. That sounds kinda crazy. Hopefully all will be well in the future and you won't come across it again.

the only variable i can think of is that i did have the phone about a week before launch. HTC mailed it to me directly.
I thought maybe that had somethign to do with it, but as far as i can tell the phone was the final shipping version.

I sent you a PM, trying to find a solution.

[Q] My Asus TF300T is on stock Android 4.0.3, what to do next?

The darn thing just started nagging me with an update notice that comes back every ten minutes. I read somewhere that updating is going to stop me from doing certain advanced things, so I finally got the last push to go for either CM10 or CleanRom, depending on which one gives me the most advanced and pleasant experience.
But before doing so, it's recommended to get some kind of flash info file or something from it that doesn't come out when upgraded to the latest firmware but does on the old 4.0.3. What would be the best way to go from now on?
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

Found something myself, thank me very much!
http://androidroot.mobi/t3_nvflash/
Sent from my ASUS Transformer Pad TF300T using xda app-developers app

do yourself a favor if you gonna go with a custom rom, Energy rom and TWRP recovery!

What are their advantages when compared to CM10 or Clean?
Sent from my Galaxy Nexus using xda app-developers app

This is really annoying... The guide I found really isn't n00b-proof. I have to figure everything out from scratch here. I hate this as much as I love it...
Other helpful stuff I found:
http://www.youtube.com/watch?v=J3ypzUaKxvo
http://forum.xda-developers.com/showthread.php?t=2034866
Going to edit this post along the way to help me remember what I did...
Edit:
Got the APX drivers installed, but now the device isn't getting the USB icon when I go into Fastboot... Wish me luck...
The Universal Naked stuff does not install ADB drivers for me...
Edit2:
So I tried the 'Have disk...' option, now I got to install ADB drivers. Used the Prime drivers, I hope these are the right drivers. The thread below got me to do this:
http://forum.xda-developers.com/showthread.php?t=1830108
Went and installed JDK and SDK as shown in that thread. Because (no **** sherlock) you need ADB stuff to use ADB stuff.
Edit3:
This is really pissing me off and I give up... It says I already have installed ADB, but ADB is nowhere to be found. I guess I'm an idiot and I can't figure this out on my own, time to go to bed. I hope someone with intelligence drops by here in the meantime. Thanks in advance...
Edit4:
I lay here wondering, is my bootloader unlocked? How can I check? Does this have to be unlocked before I go and try the link I posted in my first reply? Stupid questions of course, but I'm learning here...

Lex_Michdeandroid said:
This is really annoying... The guide I found really isn't n00b-proof. I have to figure everything out from scratch here. I hate this as much as I love it...
Other helpful stuff I found:
http://www.youtube.com/watch?v=J3ypzUaKxvo
http://forum.xda-developers.com/showthread.php?t=2034866
Going to edit this post along the way to help me remember what I did...
Edit:
Got the APX drivers installed, but now the device isn't getting the USB icon when I go into Fastboot... Wish me luck...
The Universal Naked stuff does not install ADB drivers for me...
Edit2:
So I tried the 'Have disk...' option, now I got to install ADB drivers. Used the Prime drivers, I hope these are the right drivers. The thread below got me to do this:
http://forum.xda-developers.com/showthread.php?t=1830108
Went and installed JDK and SDK as shown in that thread. Because (no **** sherlock) you need ADB stuff to use ADB stuff.
Edit3:
This is really pissing me off and I give up... It says I already have installed ADB, but ADB is nowhere to be found. I guess I'm an idiot and I can't figure this out on my own, time to go to bed. I hope someone with intelligence drops by here in the meantime. Thanks in advance...
Edit4:
I lay here wondering, is my bootloader unlocked? How can I check? Does this have to be unlocked before I go and try the link I posted in my first reply? Stupid questions of course, but I'm learning here...
Click to expand...
Click to collapse
Your tablet will say it is unlocked in the upper left part of the screen when The Asus logo appears at boot.
Sent from my Transformer Pad TF300T using Tapatalk HD

Hi, if your tablet is still on stock 4.0.3 (ICS bootloader), I recommend doing NVflash first
http://forum.xda-developers.com/showthread.php?t=1894867
If you have already updated to JB bootloader it won't work.

It doesn't say Unlocked, so I guess that's why I don't see the USB option when I try to get into Fastboot?
I'm also not able to get ADB commands recognized on my win7x64... Am I doing it wrong? What's the proper method/order of events here? Isn't there a really n00b-proof version of a guide here, or is it something I should write as soon as I get out of this mess and get it working?
Sent from my Galaxy Nexus using xda app-developers app

Have a look here for ICS bootloader unlock tool
http://forum.xda-developers.com/showthread.php?t=1667596

pjc21 said:
Have a look here for ICS bootloader unlock tool
http://forum.xda-developers.com/showthread.php?t=1667596
Click to expand...
Click to collapse
Perhaps I'm not really looking in the right location, but the Asus website says I need to choose an operating system and gives me no option to choose. This way I'm not able to download the apk...
Edit:
Tried clicking the links with the tab and it started the download... Device now has an unlocked bootloader. On to the next one...
Edit2:
Ah, now I get it. Pay attention to where that Android SDK stuff is being installed. Mine got installed in the folder I unpacked the installation files! So somewhere 256 folders deep on the Desktop was the right 'adb.exe' file. Make sure the tf300_nvflashpack files are in the same directory and open the command prompt there. After that I got back to the http://androidroot.mobi/t3_nvflash/ website and entered the commands. One moment please, back in a flash!
Edit3:
Now I have 5 files in /mnt/sdcard/AndroidRoot and I uploaded them to my Dropbox. I'm guessing they are the right files...
blob.bin
blob.log
bootloader.ebt
create.bct
recovery.bct
To be sure I uploaded them all.
Copied these files into the SDK folder, along with the other zipped files for nvflash so the nvflash command works to get the other three backup files.
Edit4:
Went on following the guide and checked the video to see if I was really going the right way. Finally I have all files backed up. Goddamn what a journey, but it makes you grow a pair of balls. Now on to the next hurdle, getting a proper ROM, because stock is really getting on my nerves.
So CleanRom, CM10 or Energy ROM? Should I first upgrade to JB? Without or with the popup I'm constantly getting?

Lex,
You have alot of the same questions I do/did, and I have your original post open in another window to respond to all your questions. I'm working on writing a guide for all this stuff so this is rather helpful. If I respond to a question twice, please forgive me as I'm literally just going down the list and answering em as I read em.
In your first post, the file you're referring to is gathered via NVFlash. I haven't used NVFlash yet, but what I understand is that if you use this tool it basically backs up your ICS (4.0.3) bootloader information. The newest firmware change is to Android Jelly Bean (4.1.1) and that re-locks your bootloader. Once you go to JB, you cannot go back. So this servers as a backup (again, this is just how I interpret the information from their website. I don't know how correct my interpretations are, and have actually opened a thread to ask for clarification about this program).
For the drivers, all I did was download the android SDK and install the 'android tools' and "extra - google drivers' from the list. My laptop was just recently wiped-out so I have no prior drivers installed, nor have I connected my tablet to my computer yet (just got a replacement tablet last weekend). I didn't use the universal driver or any other add-ons. Just use the SDK, it will install drivers, and then it will detect your device. I verified this by typing "adb devices" in command prompt and it detected the serial # of my device.
Within that same post, you had some confusion about ADB. It's just an executable, and you have to use the command prompt window from whichever directory it is installed to. So once you unzip the Android SDK or wherever you installed ADB to, use the command line commands "cd directory/where/adb/is/installed" to navigate to it, or use shift + right click within that folder and it will have an option to "open command prompt here" with admin privileges. That makes life a bit easier. Other people also install their SDK to C:\android\SDK or something similar, so it's less to type.
In order to determine if your bootloader is unlocked, look at your tablet in the top left hand corner when it boots up. It will say "Device is unlocked" and list a bunch of numbers (which if I remember correctly would just be the firmware information). Your device will not be unlocked until you actually download the unlock tool from asus' website and push the file via adb to your tablet and install it. That is, you have to take a very specific, very advanced overt action to unlock it. Nothing else and no one else can do it for you nor can it be done accidentally.
Next post (#8 in the thread): You are correct that fastboot will not show unless you are unlocked. I just verified this on my not-unlocked, not-rooted new tablet, and cannot enter fastboot mode. Your ADB commands wont work if your drivers are not correctly installed.
Post #10: You have to select "Android" under the OS drop-down box to find the unlocker app. As for the location of the ADB.exe, mine was found in this subfolder within the android SDK: <whereveryouunzippedit>\Android SDK x86_64\adt-bundle-windows-x86_64\sdk\platform-tools
That folder contained the correct (and I think only) adb.exe I needed.
For your last part, I think you should try out a number of ROM's to see which you like best. I've tried all the major ones (CM9, CM10, CleanRom, Hydro, Blackbean, and some of the stock rooted/de-odexed) ROMs and used Blackbean for the longest time because of how slick it looks (all black) and how easy it is on my eyes.
Make sure you document the steps you took so you can remember them in the future. I'm working on writing a guide right now and documenting my steps to go from a stock, locked, and not-rooted tablet to a rooted unlocked and custom flash tablet.
I really hope I was able to clarify some things. I am by NO MEANS an expert but I've spent many hours experimenting and think that I wish I had someone to answer my questions when I was first learning, rather than learning by mistake.
Hopefully this helps,
Opethfan89

Hi, I use Energy rom which I find pretty good, you will need to update to JB first as Energy, CM10 & Clean rom are all JB bootloader compliant. My tab came with JB pre installed so not sure what the best way to update is but would assume since you still have stock recovery would be with OTA update (popup notice). Here is a guide to update to JB but I think this is if you have already installed a custom recovery as it looks like you flash back to stock recovery first, thats why I think if your getting update notice and still have stock recovery, go with that.
http://forum.xda-developers.com/showthread.php?t=1845377
Once you have updated to JB stock here is a guide to install custom recovery (CWM or TWRP), root & install custom roms.
http://forum.xda-developers.com/showthread.php?t=2041627
Here is link to TWRP recovery (I had issues with CWM).
http://forum.xda-developers.com/showthread.php?t=1672108
Hope this helps.

opethfan89 said:
Lex,
You have alot of the same questions I do/did,
[..]
Hopefully this helps,
Opethfan89
Click to expand...
Click to collapse
I can only click the thanks button once, but I clicked the f- out of it that one time. Although I already got to the point where my stuff is backed up, it is really good for my/our fellow adventure-seekers to have an answer to these FAQuestions. It's awesome you took the time and effort to type that much words to help out someone you don't even know. Thanks again!
pjc21 said:
Hi, I use Energy rom which I find pretty good,
[..]
Hope this helps.
Click to expand...
Click to collapse
Same goes for you! Tomorrow I will be trying as much ROMS as I can to see which one suits me best. Also repeating this process is the best way to learn something and since I'm unbrickable, I am going to flash the hell out of it for a few days. I'll try to post my steps and findings here so I (and perhaps others with the same trouble) can benefit from it in the future.

Also I think when you update to JB your bootloader will be locked again (new bootloader), the above guide on root, customs roms also has info and links on unlocking JB bootloader. Glad I could help, have fun :good:

pjc21 said:
Also I think when you update to JB your bootloader will be locked again (new bootloader), the above guide on root, customs roms also has info and links on unlocking JB bootloader. Glad I could help, have fun :good:
Click to expand...
Click to collapse
It's upgrading now. Of course I forgot I lost root with the last OTA update and I forgot to make sure I rooted the thing so it was able to use the rootkeeper after upgrading to JB. I hope there is some documentation on rooting JB, because at the time this all happened root was not possible yet. It's past 1 AM over here, so I guess it's best to save this quest for later when I had some sleep.
Edit:
Just for kicks I tried 'Root Checker' and it said 'no root'. Then I saw 'Rootkeeper' was installed. Opened it up, tapped the restore button... Device rooted! Guess my memory is really failing big time... One down, # to go.
Edit2:
Installed TWRP:
Just downloaded the .blob from their website and
put it in the platform-tools folder.
Then renamed it to TWRP.blob.
Turned off tablet,
plugged in USB cable in the tablet ONLY,
hold volumeDown button,
plug into laptop holding button,
waiting...
choose USB logo,
open cmd-line in the platform-tools folder,
run command: "fastboot -i 0x0B05 flash recovery twrp.blob"
waiting...
Done. Let's see if it works...
Edit3:
At first I didn't understand how to get into TWRP (DOH!),
Hold volDown, power on, choose RCK.
Edit4:
Been having a fight with TWRP when I try to install CM10.1 (latest nightly: 20130121). Gives me an error status 7 or something...
Code:
Verifying update package...
assert failed: getprop("ro.product.device") == "tf300t" ||
getprop("ro.build.product") == "tf300t"
E:Error in /external_sdcard/CROMS/****.zip
(Status 7)
Error flashing zip ' /external_sdcard/CROMS/****.zip'
Of course, ****.zip is a long filename I didn't want to type completely here.
Will try to figure out whats wrong later today, first I'm going to try restoring the backup I made earlier, just to see how a complete backup works when the tablet is wiped back to factory settings.
Edit5:
The backup stuff is really cool! My tablet is back the way it was even though I wiped it completely!
Back to the ROM rumble... baked_tf300t_blackbean-6_jb-bl_b6.zip gives me the same error. Starting to get annoyed again... Let's try something different, CleanROM. Download is taking ages... I'm restoring again, so I can use the tablet for the rest of the day. As soon as I feel like it I will try again, for now I'm giving it 'the finger'.
Edit6:
Cleanrom is installing now. I guess CM (baked is CM based right?) was causing some trouble...
Done installing...
Wipe Cache/Dalvik...
Reboot...
Android is upgrading...
Might need to choose the small font, my screen is really clogged up with stuff. Didn't expect to keep my settings etc., thought it would be completely wiped. I'm going to restore and then reinstall with the highest DPI setting first, then I'll wander around the rom to check if I like it.
Edit7:
I think I'll stick with this one for a few days, runs fine if you ask me, maybe take the time to finally update my Galaxy Nexus to CM...

[Q] Tablet stuck at Asus loading logo (after twrp 2.6 recovery)

Okay! (bit of a noob here but I really want help T_T)
I'm on 4.2.1 by the way - build number should be latest available.
So I finally decided to get root on my tablet. I followed the instructions by a youtube user, and succeeded. I downloaded SuperUser and a root checker to make sure everything went right, and proceeded to download PacMan 4.2 Milestone, as well as CyanogenMod 10
I did a factory reset from the settings menu of the tablet, and tried to set up PacMan. It worked alright until the loading screen, where the ghost would bounce indefinitely. When it was clear I wasn't going to get in, I restarted, and factory reset again from the TWRP menu, this time making sure to erase Dalvik, cache, and system (I think that's all?).
I then tried to install CM10, which didn't work either. I found out later it was because CM 10 didn't work with the 4.2 bootloader.
So I factory reset again, erased dalvik, system, and cache, and proceeded to reboot into the recovery I made on external. I don't know if it's normal, but when it reached the step 'restoring data,' it was basically stuck. I let it continue overnight, and found that recovery overall took 1933 seconds (is this a sign of something bad?)
And now I'm back to booting! It's taking a really long time though - at least ~45 minutes on the ASUS screen with the little circle going around.
I guess my question is, (1) what do I do, (2) what is the situation I'm in/how did I get here, (3) how do I avoid it (if possible) in the future?

by the way, I forgot to mention that I can still access the twrp menu. I don't know if that helps though?

Hope this helps!
hobomobile said:
Okay! (bit of a noob here but I really want help T_T)
I'm on 4.2.1 by the way - build number should be latest available.
So I finally decided to get root on my tablet. I followed the instructions by a youtube user, and succeeded. I downloaded SuperUser and a root checker to make sure everything went right, and proceeded to download PacMan 4.2 Milestone, as well as CyanogenMod 10
I did a factory reset from the settings menu of the tablet, and tried to set up PacMan. It worked alright until the loading screen, where the ghost would bounce indefinitely. When it was clear I wasn't going to get in, I restarted, and factory reset again from the TWRP menu, this time making sure to erase Dalvik, cache, and system (I think that's all?).
I then tried to install CM10, which didn't work either. I found out later it was because CM 10 didn't work with the 4.2 bootloader.
So I factory reset again, erased dalvik, system, and cache, and proceeded to reboot into the recovery I made on external. I don't know if it's normal, but when it reached the step 'restoring data,' it was basically stuck. I let it continue overnight, and found that recovery overall took 1933 seconds (is this a sign of something bad?)
And now I'm back to booting! It's taking a really long time though - at least ~45 minutes on the ASUS screen with the little circle going around.
I guess my question is, (1) what do I do, (2) what is the situation I'm in/how did I get here, (3) how do I avoid it (if possible) in the future?
Click to expand...
Click to collapse
hobomobile said:
by the way, I forgot to mention that I can still access the twrp menu. I don't know if that helps though?
Click to expand...
Click to collapse
1. Assuming you know how to do this, try flashing the ASUS stock rom and kernel using TWRP. Before asking more questions, use the search tool in XDA developers first since it is most likely someone may of been in a similar situation to yours.
2. It is probably that the person who you followed on youtube might of been be using a different build of stock. That's just my hypothesis-others may differ to mine. Since you have TWRP, you will be able to recover from this situation. (Pun not intended)
3. You should always research about what you're doing with your android device before you do anything about it, especially if the guide is not moderated by the wonderful people from XDA-Developers, and even more so if you are a noob-even if you consider yourself a novice (like me)
To save you some time:
http://forum.xda-developers.com/showthread.php?t=1697227 The mother of guides, read this first.
http://forum.xda-developers.com/showthread.php?p=42407269 [TOOL]Minimal ADB and Fastboot
http://forum.xda-developers.com/showthread.php?t=2257421 Ask any question here-Noob friendly help thread.
Will update this post with more information if need be. Don't be afraid to ask if you're absolutely confused.
Hope this helped.
Live long and prosper.
If I have helped you in any way, shape or form, hit the thanks button. If I have given you a link to someone on XDA that helped you, give them thanks first.

Thanks a lot! I'll do my best trying to find the info - sorry if I have to bother you again though!

Okay, so I have minimal ADB (I actually used that to get root in the first place), and I downloaded the latest kernel and firmware - I'm pretty sure they're the right versions too (10.6.1.27).
Do I just open TWRP, factory reset, clear dalvik and cache, and install both of the above from an SD card? I did some looking around, but I still don't get what a kernel does, or if it's necessary in this situation.
I'm looking at this right now, by the way (http://forum.xda-developers.com/showthread.php?t=2187982), method three.

Okay, so I downloaded this: ASUS Transformer Pad TF300T Firmware: V10.6.1.27.1 Only for US SKU (Android 4.2) - 2013.07.29 update, unzipped the file, went back into twrp, and wiped system, data, and dalvik. When I tried to install it though, it says 'failed.'
What now?

Potential Solution?
Quote:
hobomobile said:
Okay, so I downloaded this: ASUS Transformer Pad TF300T Firmware: V10.6.1.27.1 Only for US SKU (Android 4.2) - 2013.07.29 update, unzipped the file, went back into twrp, and wiped system, data, and dalvik. When I tried to install it though, it says 'failed.'
What now?
Click to expand...
Click to collapse
hobomobile said:
Okay, so I have minimal ADB (I actually used that to get root in the first place), and I downloaded the latest kernel and firmware - I'm pretty sure they're the right versions too (10.6.1.27).
Do I just open TWRP, factory reset, clear dalvik and cache, and install both of the above from an SD card? I did some looking around, but I still don't get what a kernel does, or if it's necessary in this situation.
I'm looking at this right now, by the way (http://forum.xda-developers.com/showthread.php?t=2187982), method three.
Click to expand...
Click to collapse
Define Kernel:
Google:
Define Kernel:
ker·nel
/ˈkərnl/
Noun
A softer, usually edible part of a nut, seed, or fruit stone contained within its hard shell.
The seed and hard husk of a cereal, esp. wheat.
Synonyms
core - nucleus - pith - grain - heart - seed - essence
So that was useless. :silly:
XDA:
Define Kernel-and ROM, and everything:
http://forum.xda-developers.com/wiki/index.php?title=ROM-VS-Kernel "ROM vs Kernel"
If I was you, I would just flash a custom ROM. From here: http://forum.xda-developers.com/showthread.php?t=1697227
There are plenty of ROMs linked there. Even if you want to use one based on the Stock ROM, you can find the links there.
Flash it in TWRP the same way you flashed the "ASUS Transformer Pad TF300T Firmware: V10.6.1.27.1 Only for US SKU".
Personally, I prefer custom roms because they provide a lot of customisation options.
Is that what your looking for, or do you really want to use the stock ROM?
Remember to at least have a look at the ROMs before dismissing them.
The kernel needs to be the same type as the ROM. e.g, A stock (based) rom will need a stock (based) kernel. AKOP/ASOP ROMS need ASOP/AKOP Kernels. You get the point. See the link mentioned for more information.
Check the compatibility of the ROM with your bootloader before you flash it to not get into situations like this again. (From when you said that CM10 failed to work with your boot loader.
Hope this helped.
BTW, this did not bother me one bit. Your Welcome!
Live long and prosper.
If I have helped you in any way, shape or form, hit the thanks button. If I have given you a link to someone on XDA that helped you, give them thanks first.

If you are running "10.6.1.27" that might be the issue some roms don't boot if you can access fast boot try downgrading to 10.6.1.15.3
Sent from my HTC Desire C using xda app-developers app

1337 H4X0R said:
XDA:
Define Kernel-and ROM, and everything:
http://forum.xda-developers.com/wiki/index.php?title=ROM-VS-Kernel "ROM vs Kernel"
The kernel needs to be the same type as the ROM. e.g, A stock (based) rom will need a stock (based) kernel. AKOP/ASOP ROMS need ASOP/AKOP Kernels. You get the point. See the link mentioned for more information.
Check the compatibility of the ROM with your bootloader before you flash it to not get into situations like this again. (From when you said that CM10 failed to work with your boot loader.
Click to expand...
Click to collapse
Just to add a *tiny* little tidbit right here: every rom has a kernel. It wouldn't boot without one. Yes, a dev can remove the kernel and force you to find one to flash, but that's utterly pointless. I'm just saying that you really don't have to bother yourself with that as yet.
While it's great to educate yourself, don't get overwhelmed. You have PLENTY time to learn more.

I ran into similar issues. You need to make sure your ROM/kernal matches your bootloader and matches your recovery. If not all three match, you run into this issue.
Sent from my EVO using XDA Premium 4 mobile app

so far no good :/
I gave up on this for a couple days, figuring I'd come back to it later when I wasn't as distressed.
so right now, my goal is to get back to stock, and get everything working again before downgrading to 10.6.1.15.3, and then install a custom ROM
Not sure why, but right now, I can't even install the stock kernel flashed onto the device - twrp still tells me 'failed.'
I'm sure that I got the right stock kernel/rom for my build number, so what is going on?

Updating advice please ! Reroot failure

Hi everybody ! Ill try to keep it simple as I'm sure its covered somewhere but here goes ....
Ive been using my shield portable, rooted, for ages now no problems.
Like many Ive updated it in short ever since nothing whatsoever has worked properly , most annoyingly the screen doing backflips when you go near it and hundreds endless strange updates when rebooting.
Anyway I don't think you or I or any of us want to waste time trying to figure out why its done any of this but I just want to be able to fix it. I guess I'm going to have to start again somehow! its worth noting here that all my backup apps like Helium now don't seem to work.
After the update I of course ReRooted and it appears fine from boot loader , still says unlocked. but upon usage its clearly very confused about whether its rooted or not !
In short its useless. Advice please My kung Fu warriors
May your arrows fly straight and true

I have no idea about the various issues, but I would perform a factory reset, and clear cache and dalvik cache using at least 3 swipes per each function. The method of rooting I recommend is by flashing a zip of SuperSU from a custom recovery menu. CWM or TWRP are both available for the NSP. After flashing SuperSU, when you reboot and go into SuperSu you'll see that it's installed (locked down tighter) as a system app.
Downloads:
SuperSU (latest stable version) v2.65
CWM Recovery Menu (latest version) v6.0.4.4
TWRP (Modified recovery (based on TWRP v2.8.7.0)
Sorry. This is the best I can offer you right now. If this doesn't work I would reflash the stock images of whatever OTA you wanna be on. The images can be found @:
SHIELD Open Source Resources and Drivers. You'll need at least the platform-tools portion of the Android SDK (to use Fastboot to flash from recovery). A user friendly PC app that can basically do all this sort of stuff is Shield Ram v1.1. You might find that easier to use.
Oh and here's the latest Minimal ADB and Fastboot Drivers installer [v1.3.1]
If you need further help, let me know.

Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again

[/COLOR]
Marrhead said:
Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again
Click to expand...
Click to collapse
Yeah, pretty much the rule is generally "as long as you can still see the screen, it's probably fixable". Sounds to me like your best bet, would be to download the OTA you wanna be on, and flash a new install to your Shield. It's the quickest way from A-B. I'm about 99% sure that this would solve the problem (as long as you re-root it properly). Though if you have your reasons, you can try some of the other things first. You're welcome and let me know how things go!

So where does one get the latest OTA?
cheers

Marrhead said:
So where does one get the latest OTA?
cheers
Click to expand...
Click to collapse
I did link up the main Nvidia page that would lead to the OTA images, but here's a direct link to DL just the OTAs:
Edit: you can get there through the link I included in my previous post: SHIELD Open Source Resources and Drivers. I'm having issues with editing posts, and all sorts of odd **** with the link trying to post a more direct link. It's an Nvidia site, just scroll down to Shield Portable Recovery OS Images (something like that).
Unfortunately there are only Linux and Windows downloads available. I'm not sure what your best option would be, as you have a Mac. You could contact Nvidia support, and see what they say about it. Sorry, but I don't think I can probably help much more than this.When I contacted Nvidia support about a year ago, they were pretty helpful. Hopefully you get this sorted soon. Oh and the OTAs are flashed via a terminal/command prompt. So if you can emulate DOS on your Mac (which I don't see why not...DOSbox? maybe) then that sounds to me like the solution.

Ok , hit another brick wall. Im using a windows computer now, followed all the instructions i can find, and now the bootloader seems dysfunctional.
Ive got adb and fastboot and its recognising the device but once rebooted into bootloader which loads fine, the commands say no device found and nothing works in this mode.
If i hit recovery mode then a little dead android appears! poor little guy.
I tried shield ram but it had same problems, seems to run fine but cant find shield once its in bootloader...
Ive got the image zip of the update i want to flash but no idea if im doing it right- not sure how to use it.
Help!