Database Info

[Q] I think I killed my Nexus S! Please help! (unlocking process/rooting stuff)

So, this is what has happened so far:
I googled for a small and easy to follow guide to unlock my phone so that I can later on install a custom rom. I followed the steps provided here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s/
What I didn't notice on the first place was the "UPDATE: DO NOT FOLLOW THIS GUIDE INSTEAD Please see new root method which works on all Nexus S and Nexus S 4G!" link. Don't ask why - really don't know.
The result was having my Nexus S stuck on a screen that shows Google logo on the middle and an unlocked padlock on the bottom.
It seemed, or to be exact, I figured out that, the problem was the .img file mentioned on some point in the middle of this.. tutorial.
So, I decided to follow the newer guide that can be found here:
http://nexusshacks.com/nexus-s-hacks/how-to-root-nexus-s-or-nexus-s-4g-new/
Although all went well (didn't have to go all over the same processes up to the .img installatin point), I ended up with the same screen that shows Google logo on the middle and an unlocked padlock on the bottom.
I figured out that I could just install a rom at this point, and decided that I should go back to stock. So, I followed this guide here:
http://nexusshacks.com/nexus-s-hacks/how-to-unroot-nexus-s-i9020ti9020ai9023/
But, when I choose to install the .zip file, I get this error:
assert failed: "getprop ("ro.product.device") == "crespo" || "getprop ("ro.product.device") == "crespo"
E: Error in /sdcard/i9020t_i9023.zip
(status 7)
Installation aborded
..let me add to this point that I have bought my Nexus S from EU, it is an i9023. Let me also add that all I wanted is to flash an ICS rom and I think I have ended with a f****d device I don't know what to do with!
Any help, really, would be so much appreciated since I need to use this phone. I have a backup for calls etc but I need some smartphone features!

I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.

nickmv said:
I seriously doubt you killed your Nexus S. Temporarily disabled is more like it.
From off position, hold down Power + VOL-UP. You should be greeted with a screen with a green android and 4 options. If you can get there, that's the bootloader, and unless you manage to kill it (which is VERY hard to do), you can reflash everything from there via usb and adb.
What model Nexus S do you have? That's important for helping you to flash it.
Click to expand...
Click to collapse
Yes, I can enter this menu - there already. My model is an i9023GSM.

OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?

nickmv said:
OK, then you DONT have a dead phone. You just need to reflash it correctly.
I'm sorry I can't be helpful for longer, because I am at work,but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
On a side note, for ROM selection, are you looking for an Ice Cream Sandwich alpha ROM (android 4.0) (less stable) or the older Gingerbread ROMs (2.3.7)?
Click to expand...
Click to collapse
You gave me the good news so, thank you for that. Now, I should follow this guide and come back in case I have a problem.
As far as the rom, I wanted to flash an ICS since I cannot wait any longer for Google to release the official update. But right now, anything that can get my device up and running would be really good!

Edit: nvm. >_<

kijp15 said:
Why don't you just use shabby's one click root. Simple & much easier. Saves all sorts of troubles.
Click to expand...
Click to collapse
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!

nickmv said:
but follow this guide and make sure you follow every detail (take note of step 6 in particular).
I know it's a long guide, but it's VERY detailed, and should get you up and running.
Click to expand...
Click to collapse
OK, stuck already. On Part 2 what I understand is that I have to open the CMD and copy-paste the path to the "tools" folder? Because this is what I do, and after - since this is what I have understand - I type "fastboot oem unlock" and I get "'fastboot' is not recognized as an internal or external command,
operable program or batch file."
What do I do wrong?
EDIT:
Tottaly stuck on Part 2. It seems that there is no fastboot.exe file inside "tools" folder. I don't think the problem is something else - I'm sure I give the right commands since I tryied for fun another folder I have with fastboot.exe inside and it worked - to be exact it just gave me a FAILED messsage since device is already unlocked. Plus, regarding Part 3, Step 1, the first file for download is missing so I used the second link and downloaded 5023-cyan file. Hope this was a right move to do.
EDIT 2:
Ok, here is the story so far: I followed the guide given step by step. The USB drivers has been installed correctly so the device can be connected to the PC.
In the "tools" folder there was no such fastboot.exe file so I manually added one that I've found on the newer guide given on the 1st post. The unlocking process is failing because the device is already unlocked.
I did manage to install after this, the 5023-cyan.img file since this is the only link working from Part 3, Step 1. This gone well too!
Now, I couldn't go on with Part 4, I mean, I could not install the .zip file as it describes so through recovery mode I installed the .zip file succesfully (confirmation message to Nexus S screen).
I reboot and still get the same Google logo on the middle and an unlocked padlock on the bottom.
I cannot understand what I do so wrong? Oh, I'm so disappointed..

OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?

http://forum.xda-developers.com/showthread.php?t=1063664 or use ROM manager and select Stock ROM (you should then receive OTA upgrades to 2.3.6).
On the latter: You colud just back up different ROMs and switch between them using CW.

skatastamoutrasas said:
Will this solve the problem I'm facing? If yes, then it's fine by me.
Ok, just saw the edit, no worries!
Click to expand...
Click to collapse
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness

mixtapes08 said:
If you are still facing problems. Try locking your bootloader again with this method. Then it will let you go back on stock. Use v3 it is stable solid and easy to use.
Nexus S + CM9 kangs = Awesomeness
Click to expand...
Click to collapse
Can you give me a CM9 kangs link since as new here, I'm kinda lost?

Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?

skatastamoutrasas said:
Ok new problem this time! After I installed my 3rd rom (probably, a totall noob thing to do) which was the OEM one, I tryied to re-enter recovery mode to wipe all data and re-install the rom I want. But now I get this mark of the small green android with a big exclamation mark on top of his head. What is this new hell that found me?
Click to expand...
Click to collapse
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img

kijp15 said:
Try re-flashing the recovery. Either threw rom manager or fastboot.
Fastboot flash recovery "nameofrecovery".img
Click to expand...
Click to collapse
Worked just fine! Thank you!

skatastamoutrasas said:
OK, people, head's up! I did manage to install the latest stable rom of cyanogenmod and the phone is up and running! It means that somehow everything went well! Now, how do I return back to OEM? Because I just need to make things as they where before..
..or should I give cyanogenmod a chance?
Click to expand...
Click to collapse
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.

nickmv said:
Nice, glad to see you managed to get it working. Honestly, the hassle is kind of worth it, because you learn more about the process anyways.
That being said, give CyanogenMod a chance. There's also several other ROMs. Unless you need stock OS for warranty service, I'd recommend going with one of the many custom ROMs we have here.
There are several minimalistic AOSP-built ROMs that mimic the feel of the stock OS, but are optimized for speed, and still have some very nice tweaks that you may enjoy. Just take a look through the dev section, and you'll see we have tons of options.
Click to expand...
Click to collapse
It did worth the hassle, that's for sure. Now I think it's so easy to unlock a Nexus plus I now have a little more knowledge regarding Android .
I will stick with CM 2.3.7 as it looks just fine. I don't care about warranty, I don't think I will ever need the official service for a software issue. Now I have to re-install my apps, re-sync my accounts and setup the phone the way I want it. It will take a little more time.
But I'm glad that I pulled this through - with your help of course! Guys, you rock!
I wish that I'll be as helpful as you at the near future.

Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
MAKE SURE THAT YOU HAVE CLOCKWORKMOD PERMANENTLY INSTALLED BEFORE DOING THIS. It saves time if you mess up. Also, make sure you get the latest gapps HERE
Instructions:
1. Go to clockwork recovery
2. Select data/factory reset/wipe
3. Select clear cache as well
4. Adv Mounts and Storage > wipe /system (note, this wipes android off the phone. It's a good idea since youre going from ver 2.x to 4.x)
5. Choose "flash from zip" (or whatever it's called.....NOT flash from update.zip)
6. Flash the cm9 update file first, then flash the kernel of your choice, then flash the gapps file.
7. Back out of the menu and select reboot.
Take note though, that the new ICS OS has incompatibilities with certain apps while GPU rendering is turned on, etc. It'll prob reboot on you sometimes, etc. For the most part it's stable, but that's completely subjective.
If you do run ICS, make sure you turn on GPU rendering in Dev Options. It takes full advantage of the GPU for UI animations, etc. Sometimes there's a stray app here and there that doesnt play nice, and you'll notice if the window looks really tiny or funny. Turning it off will fix the problem.

nickmv said:
Today's latest CM9/ICS kang is here
I'd also recommend getting a custom kernel.
For batt life, morfic's SEUV kernel.
For reg performance, perhaps Matrix's kernel
Click to expand...
Click to collapse
Two questions:
The link you give me to download the ICS rom keeps loading for ever. So, I choosed this one instead:
http://forum.xda-developers.com/showthread.php?t=1356228
Right or wrong thing to do?
It it essential to install a custom kernel? I ask because I forgot to copy/paste the .zip file and due to lack of time, I procceded without it, installing the ROM and G-APPS.

[Q] SOLVED: Help - KitKat upgrade from stock... ish.

So, I did a stupid thing this morning. I spent the last, probably, five hours backing up all of my apps and data from my TF300, and once that was all done, I wiped the data on my tablet. "What makes that stupid?" What makes that stupid is, it was a miracle that I ever actually managed to root this thing in the first place, and now, I don't know a) if it's still rooted (I doubt it), and b) if I'm even mentally capable of rooting it again (I doubt it).
So, here's my situation, and if someone could just dumb down the steps for me and point me in the right direction, that's all I need. I got my tablet, I don't know, probably early 2012. I can tell you that the tablet is on ICS 4.0.3, and the build number is 9.4.3.29-20120511. It's also unlocked, I don't know if that needed to be mentioned. Now, things are better since I wiped the data on this mother, but ICS, on this tablet in particular, is slow as balls, and I'm done with it, I want KitKat. But I am so far beyond lost after what I did that if I try to work my own way out of it, I'm going to brick this thing.
I wiped the data because I was trying to do something involving the Fastboot menu or something like that. Whenever I selected the USB icon and hit up on the volume strip, the tablet just locks cold. I figured whatever caused that, would probably go away with a data wipe. It didn't. So now my data's gone, my apps are gone, my tablet's not rooted anymore, I have no idea how to get to KitKat, I can't sleep at night, it burns when I pee... let's focus on the tablet stuff for now, I'm signed up to some forums for the other stuff.
I know most of the people that read this topic will be inclined to say, "You're an idiot, read this, this, and this, and take care of it yourself." I know I'm Androidiot, and I'm humbly asking for help. Again, I'm just petrified of following the wrong topic and ruining the whole thing, so if someone could tell me how I'd go about upgrading my tablet from stock ICS to KitKat, I'd appreciate the hell out of it.

Just a little bump, not too big... no love for Tim?

Normally, you need to install the latest stock ROM from ASUS in order to recover a functional device & by the way upgrade your bootloader.
Things done, you can proceed to install recovery and kitkat.
Better explanations here : http://forum.xda-developers.com/showpost.php?p=53738192&postcount=2

zlazaar said:
Normally, you need to install the latest stock ROM from ASUS in order to recover a functional device & by the way upgrade your bootloader.
Things done, you can proceed to install recovery and kitkat.
Better explanations here : http://forum.xda-developers.com/showpost.php?p=53738192&postcount=2
Click to expand...
Click to collapse
Thank you, Zlazaar!
Well, it seems that after my device was wiped, it still didn't remove CWM as a bootloader or whatever, I don't know what I'm saying. When I hold down the power and volume down buttons, I could wait like ten seconds for fastboot, or I could tap vol up to enter the "RCK" menu. I don't know what that means. But I go into it, and I'm at the CWM menu, I think it was 5.5.0.4. You probably know better than me if I need to do anything further than that with CWM, but I should be good on that, right?
I'm almost going to go to the sites that you mentioned to download files and get more information on how to use it all. I appreciate your help, because without it, I'm sitting on an unrooted stock ROM with only most of my apps, because oh yeah, like 70 apps forgot to transfer with that backup I did... so, whoopee.
Thank you again, buddy!

The goal is kitkat, right ?
So, in order to get it you need 2 important things :
1- The latest bootloader, yours can't handle kitkat.
2- a custom recovery supporting kitkat, i.e i'm using TWRP 2.7.1.0 (link in my signature), your CWM is outdated.
The only way i know to update the bootloader is to flash Stock ROM via fastboot as described in tutorial.

I got some really stupid questions... apparently it's been entirely too long since I've messed with any of this.
What's a bootloader? I know mine's unlocked, but I didn't know there were versions of it. Is it the blob file I got from Asus?
And I have my tablet hooked up to my PC, it's on the fastboot menu wait for input from USB. When I go to the command prompt, I've tried to push TWRP to the device, but when I start a command with "adb push," it just tells me that it doesn't know what to do with that command. Same thing happened with fastboot, but then I realize I didn't have fastboot installed, so I tried to install it and it complained about a missing dll file on my computer, and I think I'm about ready to give up. lol

Here is the driver : Universal Naked Driver
After install, you can use fastboot and complet other steps.

Tim 13 said:
I got some really stupid questions... apparently it's been entirely too long since I've messed with any of this.
What's a bootloader? I know mine's unlocked, but I didn't know there were versions of it. Is it the blob file I got from Asus?
And I have my tablet hooked up to my PC, it's on the fastboot menu wait for input from USB. When I go to the command prompt, I've tried to push TWRP to the device, but when I start a command with "adb push," it just tells me that it doesn't know what to do with that command. Same thing happened with fastboot, but then I realize I didn't have fastboot installed, so I tried to install it and it complained about a missing dll file on my computer, and I think I'm about ready to give up. lol
Click to expand...
Click to collapse
Ok Tim so the GOAL IS: 4.4 KITKAT CORRECT?
This is the process overview. This is a review.
Step 1 Upgrade the bootloader. Why? Inorder to flash a 4.4 rom you need a Jelly Bean 4.2 bootloader. How? Do as zlazarr suggests by flashing the lastest stock version V10.6.1.27.5 on your tf300t. Flashing the latest stock rom will update your bootloader. And here's another helpful guide.
http://www.theandroidsoul.com/how-to-restore-asus-transformer-tf300t-back-to-stock/ Remember that the SKU has to match!
Step 2 Follow this guide.
http://www.transformerforums.com/fo...nstall-roms-tf300-jelly-bean-kitkat-roms.html
It guides you on how to unlock your bootloader which you already have and it shows you how to install twrp. After installing twrp MAKE A BACKUP!
NOTE: If using the command method on the link fails repetitively use the app rashr to install the twrp version in the link
Step 3 Upgrade twrp to vr 2.7.0.0 or higher. Refer to step 2 link on the post about 4.4 kitkat.
Step 4 Install a 4.4 kk rom. I recomend the lastest snapshot of Cyanogen Mod 11. The download is on their wiki.
And then your done! Don't give up! The hardest part I find is using the command prompt! Look for work arounds. AND SEARCH FOR METHODS!
Goodluck

b..c said:
Ok Tim so the GOAL IS: 4.4 KITKAT CORRECT?
This is the process overview. This is a review.
Step 1 Upgrade the bootloader. Why? Inorder to flash a 4.4 rom you need a Jelly Bean 4.2 bootloader. How? Do as zlazarr suggests by flashing the lastest stock version V10.6.1.27.5 on your tf300t. Flashing the latest stock rom will update your bootloader. And here's another helpful guide.
http://www.theandroidsoul.com/how-to-restore-asus-transformer-tf300t-back-to-stock/ Remember that the SKU has to match!
Step 2 Follow this guide.
http://www.transformerforums.com/fo...nstall-roms-tf300-jelly-bean-kitkat-roms.html
It guides you on how to unlock your bootloader which you already have and it shows you how to install twrp. After installing twrp MAKE A BACKUP!
NOTE: If using the command method on the link fails repetitively use the app rashr to install the twrp version in the link
Step 3 Upgrade twrp to vr 2.7.0.0 or higher. Refer to step 2 link on the post about 4.4 kitkat.
Step 4 Install a 4.4 kk rom. I recomend the lastest snapshot of Cyanogen Mod 11. The download is on their wiki.
And then your done! Don't give up! The hardest part I find is using the command prompt! Look for work arounds. AND SEARCH FOR METHODS!
Goodluck
Click to expand...
Click to collapse
Okay, so I've started work on this finally, but I think I might be having some trouble. I flashed the latest stock ROM onto my baby and restarted the tab like the article said, but now it's taking a very long time to load. I don't know if it's supposed to be taking this long, considering I'm pretty sure it wiped the data on it (flashing a ROM wipes data, doesn't it?), so I'd assume that removing the weight of those apps would make startup lightning quick.
I have the ASUS logo and the spinny circle. And it's just spinning and spinning and spinning and spinning. Is this a problem?
I'm going to let it spin spin spin spin spin for like five more minutes, and then I might go cry for a while.
EDIT: I cried too soon, it loaded for a long time then came to a menu that says "Android is upgrading..." and it's optimizing the apps, or apptimizing, that were apparently NOT wiped when I flashed a new ROM. lol, so I'm back on track. So far, so good. Thank you for the detailed guide, I appreciate it!
Further edit: And I'm also done rooting and flashing to KK 4.4. Thank you for dumbass-proofing the process for me, it is incredibly highly appreciated. I didn't kill my tablet!

Tim 13 said:
Okay, so I've started work on this finally, but I think I might be having some trouble. I flashed the latest stock ROM onto my baby and restarted the tab like the article said, but now it's taking a very long time to load. I don't know if it's supposed to be taking this long, considering I'm pretty sure it wiped the data on it (flashing a ROM wipes data, doesn't it?), so I'd assume that removing the weight of those apps would make startup lightning quick.
I have the ASUS logo and the spinny circle. And it's just spinning and spinning and spinning and spinning. Is this a problem?
I'm going to let it spin spin spin spin spin for like five more minutes, and then I might go cry for a while.
EDIT: I cried too soon, it loaded for a long time then came to a menu that says "Android is upgrading..." and it's optimizing the apps, or apptimizing, that were apparently NOT wiped when I flashed a new ROM. lol, so I'm back on track. So far, so good. Thank you for the detailed guide, I appreciate it!
Further edit: And I'm also done rooting and flashing to KK 4.4. Thank you for dumbass-proofing the process for me, it is incredibly highly appreciated. I didn't kill my tablet!
Click to expand...
Click to collapse
Hi Tim13,
I'm glad to hear that everything went well and my guide helped you!:good: And to answer your question flashing doesn't wipe your data. You have to manually wipe it. And lol:laugh::good: that you didn't kill your tab. I hope you find your tab faster and useful again!

It's just as slow and useless as it was. But honestly, the flashing process was fun, and I learned from it. Plus, TWRP and Cyanogen mod are awesome, and now I know that. lol

Great to see you up and running @Tim 13 :good:
Can you add SOLVED to the thread title
Thx Josh

No, I'm not gonna do that.
I'm just kidding. You're all right, darling. :good:
Edit: Actually, not being a douche, I can't figure out how to edit the thread title. I went to edit the first post and I can't change the title of the post... I'm gonna look around for how to do it a bit more but after that I'm gonna go to bed.
DOUBLE EDIT: Got it, as you can see. Thanks to all that helped out!

Bootloop 2013 Moto G Boost Mobile XT1031 8GB

Hey guys!
To start, I want to say what an amazing place XDA is and how much information and knowledge you can get from here and how awesome the moderators are. I don't think I could ever find another amazing and/or helpful community such as those found here! Thanks to all who have helped me out with my Android issues!
Now to my issue and I apologize ahead of time if there is another thread (or related thread) found in the forum.
As the title states, I have a 2013 Motorola Moto G XT1031 Boost Mobile device. I had upgraded it to Lollipop 5.0.2 or 5.1 when it came out (I can't remember which one it was) and I had then decided to root it. I can say that I believe I was successful in rooting the device because I was able to install Supersu and use RootChecker to verify the install. Everything was going okay until i decided to research and eventually install a custom recovery and attempt to install a custom ROM. Well, let's just say that the recovery install was a bust...
In doing my research for a custom recovery, I found that TWRP had a custom recovery for my phone and apparently for my firmware via TWRP's app on the Play Store. So, I searched for my device in their in-app search for a custom recovery, downloaded it and installed it from the app. Now, my gut told me that this probably wouldn't work and that I should probably be installing a custom recovery via CLI. Nope. I didn't do this. Instead, like I said, I installed a custom recovery from the app itself. That screwed things up for me. I have no idea if it was the install, but my phone began to act incredibly strange. When in the TWRP recovery, my screen had this line that would continuously scroll from top to bottom. It wasn't a completely solid line, but it was transparent, almost like an empty thermometer glass stick was going down the screen. It was weird and not normal. I figured the phone's software was partially broken. It only did this in the TWRP recovery. Nowhere else did this happen. It was slightly annoying.
Later on I decided to install a custom ROM. Again, I did the necessary research to find out if there were any ROMs available for my phone (using XDA of course and others) and found that there were a few out there. So, I downloaded one (wish I could remember which one) and attempted to install it...keyword there. After attempting the install, my phone would not boot. Like at all. Dead. So back to the drawing board I went to try and reverse the damage. Using XDA (ironically) and a plethora of other sites, I tried to resurrect my phone and bring it back to life. After countless hours of trying and trying and trying and more and more research, I just gave up. The phone is dead. Great. $170 spent on a phone to break it a year later.
It's been roughly 4-5 months since I have attempted to redo the process and after another minor attempt, somehow I was able to remove the root completely, including the custom recovery and ROM. I don't know what the heck I did, but it worked....sort of. The phone is now stuck in a bootloop on the logo and sometimes the "bootloader has been unlocked" screen when try and factory reset the phone from the default recovery. When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set and to have this and that. I have this and that installed on my PC, but obviously cannot enable USB-debugging which is needed for ADB and fastboot to recognize my device.
So, my question for anyone who would like to help me out is this: what are my options? Is the phone recoverable? Is there any way I can get ADB/fastboot to see my device and finally install the stock firmware on the phone? I have the proper drivers installed and ADB/fastboot are on my PC. Any help would be amazing, even if you have to tell me to junk it.

blckdragn22 said:
When trying to reinstall the stock firmware, I read everywhere that I need the phone to have USB-debugging set
Click to expand...
Click to collapse
This is incorrect, where did you read that? To reinstall the stock firmware using fastboot, you must be able to boot to the bootloader menu only.

I heard this from a few websites actually, although I could never find a situational fix for my phone. I am trying to restore back to Lollipop without a custom recovery, because within the past hour I found out TWRP was never fully removed when I tried booting into recovery from the AP Fastboot menu when doing to power+vol down option. The TWRP logo shows for about 10 seconds and then the phone tries booting normally, showing the unlocked bootloader warning.
So, yes I can boot into the bootloader menu all day long with no problems. It's just an selection I make doesn't get me anywhere. My question I guess now is: how do I go about reinstalling stock firmware via the bootloader menu. I have Minimal ADB and Fastboot installed on my PC. If I need the full ADB, I can download that. And of course I'd need the firmware, too.

You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795

_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
This thread had the firmware I was looking for thank you. I believe I have the flashing stock firmware process down, I hope. I'l refer to the guide if I need help. Thank you so much!

_that said:
You can find stock firmware images in this thread, there's also a link to an installation guide there:
http://forum.xda-developers.com/moto-g/general/index-moto-g-falcon-factory-firmware-t3110795
Click to expand...
Click to collapse
I am trying to follow the steps listed here http://forum.xda-developers.com/showthread.php?t=2542219&page=35 and for some reason I cannot run any of the commands pertaining to the sparsechunks. This is what I get:
Is there anything you could tell me about that?
Edit: I was able to figure what the issue was when trying to write the sparsechunks. I had to insert a "." after 'sparsechunk' because that is how the file is named in the folder. However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?

blckdragn22 said:
However, now I am getting a new error, but it takes place on the phone screen. Every time I attempt to write a sparsechunk, it will initiate the process of doing so, but on the phone I'll get what appears to be an error saying, "Image is too large" in pink lettering. Why does this happen? Each sparsechunk file is at least 4MB less than the max-sparse-size according to the ADB and my phone, which is set to 256MB. Is there any way to change that?
Click to expand...
Click to collapse
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).

_that said:
Check which sparsechunk files you have and make sure you flash all of them in ascending order. If it still fails, copy/paste the contents of your command prompt window (no screenshots please).
Click to expand...
Click to collapse
I will try that. There was a ...sparsechunks.0 as well apart from sparsechunks.1, sparsechunks.2 and sparsechunks.3. Shall I include that, too?
And adding the screenshot was an amateur mistake. My bad.

@_that this worked like a charm. Phone is 100% working ans usable now. Incredibly helpful. Thank you so much!

Updating advice please ! Reroot failure

Hi everybody ! Ill try to keep it simple as I'm sure its covered somewhere but here goes ....
Ive been using my shield portable, rooted, for ages now no problems.
Like many Ive updated it in short ever since nothing whatsoever has worked properly , most annoyingly the screen doing backflips when you go near it and hundreds endless strange updates when rebooting.
Anyway I don't think you or I or any of us want to waste time trying to figure out why its done any of this but I just want to be able to fix it. I guess I'm going to have to start again somehow! its worth noting here that all my backup apps like Helium now don't seem to work.
After the update I of course ReRooted and it appears fine from boot loader , still says unlocked. but upon usage its clearly very confused about whether its rooted or not !
In short its useless. Advice please My kung Fu warriors
May your arrows fly straight and true

I have no idea about the various issues, but I would perform a factory reset, and clear cache and dalvik cache using at least 3 swipes per each function. The method of rooting I recommend is by flashing a zip of SuperSU from a custom recovery menu. CWM or TWRP are both available for the NSP. After flashing SuperSU, when you reboot and go into SuperSu you'll see that it's installed (locked down tighter) as a system app.
Downloads:
SuperSU (latest stable version) v2.65
CWM Recovery Menu (latest version) v6.0.4.4
TWRP (Modified recovery (based on TWRP v2.8.7.0)
Sorry. This is the best I can offer you right now. If this doesn't work I would reflash the stock images of whatever OTA you wanna be on. The images can be found @:
SHIELD Open Source Resources and Drivers. You'll need at least the platform-tools portion of the Android SDK (to use Fastboot to flash from recovery). A user friendly PC app that can basically do all this sort of stuff is Shield Ram v1.1. You might find that easier to use.
Oh and here's the latest Minimal ADB and Fastboot Drivers installer [v1.3.1]
If you need further help, let me know.

Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again

[/COLOR]
Marrhead said:
Hi ! Thanks for the good advice.
I should have mentioned, I'm using a Mac now.
From what I understand it's still possible , maybe
Even easier.....
Sorry to throw a spanner in your super helpful works !
Thanks again
Click to expand...
Click to collapse
Yeah, pretty much the rule is generally "as long as you can still see the screen, it's probably fixable". Sounds to me like your best bet, would be to download the OTA you wanna be on, and flash a new install to your Shield. It's the quickest way from A-B. I'm about 99% sure that this would solve the problem (as long as you re-root it properly). Though if you have your reasons, you can try some of the other things first. You're welcome and let me know how things go!

So where does one get the latest OTA?
cheers

Marrhead said:
So where does one get the latest OTA?
cheers
Click to expand...
Click to collapse
I did link up the main Nvidia page that would lead to the OTA images, but here's a direct link to DL just the OTAs:
Edit: you can get there through the link I included in my previous post: SHIELD Open Source Resources and Drivers. I'm having issues with editing posts, and all sorts of odd **** with the link trying to post a more direct link. It's an Nvidia site, just scroll down to Shield Portable Recovery OS Images (something like that).
Unfortunately there are only Linux and Windows downloads available. I'm not sure what your best option would be, as you have a Mac. You could contact Nvidia support, and see what they say about it. Sorry, but I don't think I can probably help much more than this.When I contacted Nvidia support about a year ago, they were pretty helpful. Hopefully you get this sorted soon. Oh and the OTAs are flashed via a terminal/command prompt. So if you can emulate DOS on your Mac (which I don't see why not...DOSbox? maybe) then that sounds to me like the solution.

Ok , hit another brick wall. Im using a windows computer now, followed all the instructions i can find, and now the bootloader seems dysfunctional.
Ive got adb and fastboot and its recognising the device but once rebooted into bootloader which loads fine, the commands say no device found and nothing works in this mode.
If i hit recovery mode then a little dead android appears! poor little guy.
I tried shield ram but it had same problems, seems to run fine but cant find shield once its in bootloader...
Ive got the image zip of the update i want to flash but no idea if im doing it right- not sure how to use it.
Help!

bootloop - question on how to proceed

I sold my tf700 to a friend, and let him know: Do not factory reset through the Android settings. Well, He passed it on to someone else, and forgot to mention this. So, that whole TWRP bootloop scenario exists. Dug through forums, found a post where someone had made some file that resets the boot process to not go immediately to TWRP or something, IIRC, but regardless, I've got a custom-made solution, and even wrote a batch file to automate the thing (given the amount of time you have the TWRP screen before it reboots) much like the OP had.
Here's the problem: my desktop doesn't recognize the usb device when I plug in to windows. IIRC, I'd always had some kinda issue with that version of TWRP, but I never addressed that, and that fell by the wayside apparently. I don't have time to sanitize my PC and re-establish the ASUS driver environment or other advanced trickery or whatever, and I just sold my laptop prior to trying on that. My question to you fine folks is this: If I were to install Ubuntu or some other Linux-based environment, would my odds increase in terms of being able to coax TWRP to be recognized so I can flash this tiny little file over and get the thing back running? Apparently windows just doesn't want to, and short of being able to put a newer TWRP on the device, I've got to establish a usb connection somehow.
TIA :good:

monogwai said:
I sold my tf700 to a friend, and let him know: Do not factory reset through the Android settings. Well, He passed it on to someone else, and forgot to mention this. So, that whole TWRP bootloop scenario exists. Dug through forums, found a post where someone had made some file that resets the boot process to not go immediately to TWRP or something, IIRC, but regardless, I've got a custom-made solution, and even wrote a batch file to automate the thing (given the amount of time you have the TWRP screen before it reboots) much like the OP had.
Here's the problem: my desktop doesn't recognize the usb device when I plug in to windows. IIRC, I'd always had some kinda issue with that version of TWRP, but I never addressed that, and that fell by the wayside apparently. I don't have time to sanitize my PC and re-establish the ASUS driver environment or other advanced trickery or whatever, and I just sold my laptop prior to trying on that. My question to you fine folks is this: If I were to install Ubuntu or some other Linux-based environment, would my odds increase in terms of being able to coax TWRP to be recognized so I can flash this tiny little file over and get the thing back running? Apparently windows just doesn't want to, and short of being able to put a newer TWRP on the device, I've got to establish a usb connection somehow.
TIA :good:
Click to expand...
Click to collapse
Well yes and no.
Linux works much better with adb/fastboot, but if it it easier to install Linux and get it working if you have never used it compared to getting Windows drivers working - idk....

berndblb said:
Well yes and no.
Linux works much better with adb/fastboot, but if it it easier to install Linux and get it working if you have never used it compared to getting Windows drivers working - idk....
Click to expand...
Click to collapse
I figured that would probably be the case. Now, it's been several years since I've used Linux (Ubuntu Feisty Fawn was the last time I used Linux, and that was just to hack a first gen Xbox), but i'm a command-line based OS guy from the days of old, so I oughta be okay. I'm sure one of the various and sundry tutorials here on xda will help should I get stuck.
So, that being said, I guess I just need to install a distro and grab some adb/fastboot drivers for Linux? Or is that all built in? Is the command line interface sufficient, or will I need some GUI like xwindows (sorry if my info is horribly dated, lol.)
I'd probably better do some reading.

Nobody has any more expertise to proffer?

monogwai said:
Nobody has any more expertise to proffer?
Click to expand...
Click to collapse
I cam across this live distro recently and the dev included the tools needed for adb fastboot. It works great! https://forum.xda-developers.com/an.../live-iso-adb-fastboot-driver-issues-t3526755
There also several Puppy Linux distros out there which may be interesting since they offer persistent mode already but afaik you have to download the adb fastboot binaries yourself. But that's it - no drivers needed.
With those installed you just need as terminal window. No other gui necessary

berndblb said:
I cam across this live distro recently and the dev included the tools needed for adb fastboot. It works great! https://forum.xda-developers.com/an.../live-iso-adb-fastboot-driver-issues-t3526755
There also several Puppy Linux distros out there which may be interesting since they offer persistent mode already but afaik you have to download the adb fastboot binaries yourself. But that's it - no drivers needed.
With those installed you just need as terminal window. No other gui necessary
Click to expand...
Click to collapse
This is just the tip I needed. Big thanks!

Well, i assembled the troops- universal naked driver and minimal adb/fastboot on a fresh win 8.1 install. Bootit.ko file in my adb folder. Opened adb, plugged in tablet. Twrp starts. Hear the USB plug in noise, so adb is ready. Adb devices command, shows up recovery like it should. I then run a batch command to automate:
adb push bootit.ko /sdcard/
adb shell insmod /sdcard/bootit.ko
... as per the directions. I get this in response:
adb: error: connect failed: protocol fault <couldn't read status>: no error
on the first command, and 'no device found' on the second.
Now what?
Edit: nevermind. Added 'adb devices' to the batch file and it did it fast as anything. Lol.

New kink: adb command succeeded and i got fastboot access. Formatted 'misc' partition and rebooted-- still with the bootloop. I can still access fastboot, but that's it. Twrp always restarts. So, did SWIM bork the recovery partition too? Wondering if I should try re-flashing twrp, or downloading the original ASUS blob file and restarting from square one?
Edit:
Got impatient, started trying things. Links found thru the forums pointing to original ASUS rom blob are all broken, so i settled for starting with twrp. Downloaded freshest version from twrp.me compatible with the device and flashed it-- same result upon attempting to open twrp.
Took a break. Thought about it, and decided to fastboot erase recovery, and try flashing twrp again. Probably not a great idea... Now I get
Sending 'staging' <7210 kb>...
FAILED <data transfer failure (unknown error)>
So I guess there's a step after erasing to re-init the partition or something?
Just a note to anyone lurking - don't do stuff if you're only half-informed. You can be stupid and impatient like me and have broken stuff.

Impatience is a very bad advisor...
As long as you have fastboot you should be ok. Asus seems to have messed with their website again or they finally took the support pages down permanently.
I have a copy on my server and can upload it tonight.
Patience my friend, patience

berndblb said:
Impatience is a very bad advisor...
I have a copy on my server and can upload it tonight.
Patience my friend, patience
Click to expand...
Click to collapse
This is too true. That's why I threw in that little blurb. :good:
I'll await your link with bated breath.

Ok here's the 10.6.1.14.10 firmware:
https://www.androidfilehost.com/?fid=817550096634791660
Don't forget to check the md5 once downloaded
You may de-bate your breath again

berndblb said:
Ok here's the 10.6.1.14.10 firmware:
https://www.androidfilehost.com/?fid=817550096634791660
Don't forget to check the md5 once downloaded
You may de-bate your breath again
Click to expand...
Click to collapse
Debate my breath? Well, my breath reeks of Marijuana... I think it's a liberal.
Lol
Just a question: since I'll be repopulating all the partitions with the stock blob, does that affect my unlocked bootloader, or is it gonna be straight up manufacturer reset? I'm sure that's covered in the threads that address the 'buster99' process, but I need to go locate the thread. I didn't fully digest the thread as i'd yet to find the blob I could d/l, until you hooked it up. ?

No, you cannot relocate the bootloader. Flash away

berndblb said:
No, you cannot relocate the bootloader. Flash away
Click to expand...
Click to collapse
Ugh, corrupt archive. ? trying to download from a different server this time.
Edit: same results w/new download. Repairing the archive didn't help either.
Asus, ya'll are killing me! Every link on the interweb linking to a TF700 firmware is broken, and all that can be found are for the 700kl.

Final update:
Found a valid download link for 10.6.1.14.8. Had some difficulties with it (revived the post on the buster99 process) -- followed as written, and had a fail on the last process <invalid state>. Being super impatient (mentioned *that* before, lol), I decided to try and reestablish twrp, as that was the original issue. That took! Flashed 3.0.0-1 (iirc), was able to open twrp, but couldn't mount system or anything. So I formatted the crap out of all partitions, converted /data to f2fs, and was able to successfully flash katkiss nougatella. Wiped the caches, rebooted, and I'm golden! 3 months later, and it finally works.
Moral of the story: don't sell rooted devices to ppl who don't understand what that entails. You can tell a person till ur blue in the face, NO FACTORY WIPE VIA ANDROID -- Odds are, they'll forget. Worked out for me in the long run (took back the 700 and gave a 201 as replacement), but i was never sure I'd come out clean on the other end.

I have similar problem, i can't even go to bootloader.
Just keep bootlooping. Is there any chance of reviving my tf700t?
If yes please advice me step by step process to do that.
Thanks

Not enough information. What can you get to?
What's your ROM, bootloader, recovery?

berndblb said:
Not enough information. What can you get to?
What's your ROM, bootloader, recovery?
Click to expand...
Click to collapse
Thanks you already help on other thread.
It's a long story how this happened.
By the way I was running nougtell version don't remember as it happened in January.
I wanted to transfer some video files on my usb 2tb hard drive, so I did usb otg connection to my tab, i did this thing before and I use es file explorer to do the transfer, few occasions es file hang or whole tablet hang so I have to restart. But in January when this thing happened it just went into bootlooping i can go to fastboot but not recovery or android.
Then I search on many thread i couldn't find any working solution.
My cable was not detecting tab so I couldn't able to push recovery., But the same cable was ok for charging.
Then I bought new cable from eBay it took around a month to arrive.
But in mean time being impatient i tried data wipe from bootloader.
Then even i couldn't able to bootloader after that.
I know being impatient with doing something like this is not good you have to suffer.
Bootloader was latest version .14 at the end and recovery was 3.0.1
Using nogtella rom
Thanks