Can't seem to run cm12 - T-Mobile LG G2

I am running 4.4.2 I installed the 20g bootstack I believe that's what it's called and then installed cloudy. Every time I try to flash any cm based ROM it gives me an error or doesn't boot at all and gets stuck in the lg boot screen. I ready that I have to change the boot loader or the radio but I can't seem to find which one is correct. I am also choosing the right d801 version for cm based roms. Any help would be much appreciated thanks.
Sent from my LG-D801 using XDA Free mobile app

Hey did you figure this out yet? For the CM 12 nightly, after I flashed the 20g bootstack, I flashed the D801 JB bootloader from blastagator http://blastagator.ddns.net/bootloader.php. Then I was able to install CM.

This worked for me. Thanks.

Related

No Mobile Data on Moto G XT1033 using latest Nightly Build of CM11

Hello guys a complete noob here, have flashed the latest nightly build of cm-11-20140730-NIGHTLY-falcon on my Dual Sim Moto G retail Asia (India), everything seems to work fine except for Mobile Data connection, there seems to be no response while selecting the APN settings or turning mobile data, have read somewhere there was an issue, wish I had read it earlier.
So is there a work around for turning on mobile data on cm11 nightly builds for xt1033 on Indian networks ?
Or is flashing stock rom the only option left ?
Kindly guide me on getting my stock rom back and working.
Thanks in advance !
Try reflashing cm or any other rom....
Sent from my XT1033
jbanti said:
Try reflashing cm or any other rom....
Sent from my XT1033
Click to expand...
Click to collapse
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
kailash9999 said:
Reflashed CM ROM thrice, doesnt seem to work, tried reflashing 4.4.2 stock rom, getting an install aborted (expected signature to be 4.3 error) on CMW recovery, my phone came with 4.3 out of the box, so do i have to flash 4.3 stock rom to get my phone back to normal or will 4.4.2 stock rom work ?
Thanks in advance !
Click to expand...
Click to collapse
Try other rom than CM, maybe it will work.

[Q] CM 12 in XT1033 (Not converted into GPE)

My Moto G is XT1033 varient. I didnt converted it into GPE. Its just normal XT1033 out of box. I unlocked the bootloader and then flash TWRP (2.8.0.1-xt1032) recovery to install CM12. But when i booted into recovery, i got flickering screen. Then i flashed Philz Touch (philz_touch_6.58.7-falcon) and installed CM 12 official by wiping data, system and cache. But i cant get pass through the boot logo. Is there any way to get latest TWRP for XT1033 varient. How can i flash CM 12 in my XT1033 varient without converting it into GPE.
Flash CM11 first. Then flash CM12 over it. Though dual sim is not working on XT1033.
Ok. If i flashed CM 12 through CM 11 will i get one sim working?
Anyway, in CM12 thread, they mentioned that we need L compatible recovery. What will happen if i flashed CM11 using Philz (Which i think Kitkat compatible recovery.) Will it work on Lollipop. And since, i trapped in bootscreen, how can i flash CM11 without copy it to my mobile. Thanks.
I downloaded CM 11. But i cant copy that to my mobile, since it cant surpass the boot screen. i tried adb sideload and adb push. But permission denied. Please help me on this.
Y:cool: said:
Ok. If i flashed CM 12 through CM 11 will i get one sim working?
Anyway, in CM12 thread, they mentioned that we need L compatible recovery. What will happen if i flashed CM11 using Philz (Which i think Kitkat compatible recovery.) Will it work on Lollipop. And since, i trapped in bootscreen, how can i flash CM11 without copy it to my mobile. Thanks.
Click to expand...
Click to collapse
1. No dual sim or just one sim in slot will not work
2. I used philz to flash cm12 and had no problems.
So you didnt convert XT1033 to GPE?
How long it will take to boot up for first time?

[Q] cm12 nightlies do not work as intended

Hello,
I keep trying to update to the latest nightly to get cyanogenmod 12 on XT1302. However they don't work. I get weird scan lines, even during the boot logo and animation. Everything is slow and unstable. During installation it always says root access possibly lost, fix, yes or no. Thankfully I have a working backup, but it's stuck on an old 2014 cm 11 snapshot and I want to upgrade
I suspect there is a problem with gapps since I get incessant "X app has stopped working error" messages and it's always a google service. However I do not know what the procedure is. I downloaded the cm12 gapps and flashed them after flashing the nightly as said in faq but it doesn't seem to work. Sometimes even Trebuchet stops working, making the phone totally unusable.
Any help would be greatly appreciated. :good:
Are you running with a lollipop bootloader? I think the latest CM12 requires it.
audit13 said:
Are you running with a lollipop bootloader? I think the latest CM12 requires it.
Click to expand...
Click to collapse
I've been googling this and I think you have correctly identified the issue. If I install the lollipop bootloader, will I be able to go back to my cm11 backup in case of an emergency?
Just to confirm, to update the bootloader, you have to flash the brazil lollipop rom and it should work?
If you unzip the stock ROM, the bootloader is the motoboot.img file.
I don't think you need to flash everything, just the bootloader file. If that doesn't allow you to use CM12, you may have to restore your CM11 nandroid and then flash CM12.

[Q] Help with roms again LG G2 VS980

I have a LG G2 vs980 on KK 4.4.2
everytime i go and install a rom in TWRP I put my phone in a boot loop and im not sure why I cant install any custom roms it's on LG g2s stock rom atm it's rooted and i have twrp
Only rom that has ever worked for me is cloudy G2 2,2 and thats it?
and Idea why I can't install any other 4.4+ roms I follow the instructions correct and make sure their Verizon compatible, Thanks.
http://forum.xda-developers.com/showthread.php?t=2582673 HellFire Rom for example I just tried it I did it as it said and It boot looped me again

XPERIA L C2104 running CM12.1 !! NO WIFI !!

Yesterday I flashed CM-12.1-20160822-NIGHTLY without any issues...followed by Gaaps.
I am using ThunderZAp-4.16 kernel.
I found no significant bug other than that I can't switch on the WIFI now. I am sure there is no problem with my WIFI because I have been using it for the past one year.
I did a clean re-installation but the problem with the WIFI still persists.
Can anyone please help?
What stock rom version were you on before? And don't use tz, it is outdated now.
so, first, i flashed the basic taoshan kernel that comes along with cm12.1
i read in one of the xda threads that the wifi problem can be fixed by flashing stock rom and then flashing cm12.1. i tried to flash C2104_15.3.A.1.17_Generic, but there are some issues with my Flash Tool because, in the flash window I can only see the device name. All the other options are greyed out. Even the contents section is empty.
Now i recoverd a recovery using TWRP. so currently i have a rooted and bootloader unlocked 15.0.A.2.17. I have unrooted and relocked my bootloader so that I can update upto 15.3.A.17 using the official updates.
After getting 15.3.A.17 this way, I plan to root and unlock bootloader again...followed by flashing cm12.1 nightly using twrp.
Will doing all of this make the wifi work on CM 12.1?
newguyknowsnothing said:
What stock rom version were you on before? And don't use tz, it is outdated now.
Click to expand...
Click to collapse
so, first, i flashed the basic taoshan kernel that comes along with cm12.1
i read in one of the xda threads that the wifi problem can be fixed by flashing stock rom and then flashing cm12.1. i tried to flash C2104_15.3.A.1.17_Generic, but there are some issues with my Flash Tool because, in the flash window I can only see the device name. All the other options are greyed out. Even the contents section is empty.
Now i recoverd a recovery using TWRP. so currently i have a rooted and bootloader unlocked 15.0.A.2.17. I have unrooted and relocked my bootloader so that I can update upto 15.3.A.17 using the official updates.
After getting 15.3.A.17 this way, I plan to root and unlock bootloader again...followed by flashing cm12.1 nightly using twrp.
Will doing all of this make the wifi work on CM 12.1?
Wow I'm not sure. Why don't you try older version of flashtool (0.9.11). This ver works well for me.
Flashed stock rom using Xperia PC Companion. But now i am confused as to which Cyanogenmod ROM i should flash.
Is there a stable version somewhere? All that i could find were nightlies.
xperiajack28 said:
Flashed stock rom using Xperia PC Companion. But now i am confused as to which Cyanogenmod ROM i should flash.
Is there a stable version somewhere? All that i could find were nightlies.
Click to expand...
Click to collapse
Yes their is not stable version on cyanogenmod ,you can find more stable releases at Free experia community but still they aren`t that stable and they are pretty old..... http://fxpblog.co/

Categories

Resources