Related
I apologize if this has been covered a 1000 times, but I did a cursory search and only run into threads about the screen cover or full-body protection, i.e. the lens cover is almost always just mentioned in passing.
I'm one of the many who have discovered that the plastic lens cover integrated into the battery cover is extremely prone to scratches. I've ordered two extra covers from Expansys, but at this rate, I'll need to get a new one every 2-3 months.
On previous phones, I tried various screen covers that either came with a lense cover (Martin Fields) or cut one out myself, only to find that the clarity of the plastic screen covers causes the pictures to come out hazy or milky. This is partially due to the difficulty of removing fingerprints, but even more due to the fact that screen protectors aren't really designed to be crystal clear like a camera lens is. I invariably took them off and risked it, but on most of my other units, the only thing that was real glass was the lens cover. Not so on the Desire.
Does anyone have any advice on this front?
i use the martin fields lens cover that came with the martins fields screen cover... its very good for the price....
I had an old screen protector that I cut a rectangle to cover the lens.
Looks OK but not perfect.
I may try to cut a circle to cover it properly.
I am not sure how you damage it, i keep my phone in its pouch, when i take it out or put it back down i put the phone ontop of the pouch so the camera is not touching the surface. A cover would i assume make the picture loose quality?
I'm generally very careful with my phones, but accidents happen and I managed to get a bunch of hairline scratches on the lens cover after just 6 weeks with the phone.
hoppi05 said:
i use the martin fields lens cover that came with the martins fields screen cover... its very good for the price....
Click to expand...
Click to collapse
Can you show me URL for this product?
Not saying that they haven't made progress, but I used to have a Martin Fields lens protector on my old Omnia i900 and found that the plastic of the lens protector caused hazy pictures even when clean.
I'm beginning to wonder if a liquid solution might be the way to go. Something like clear nailpolish that could be removed and reapplied if it got scratches in it. Anyone hear of something like this?
I've got the same problem, a lot of little scratches at the lens cover which make my photos not as sharp/clear as it should be. I think with the pouch I recently ordered the problem is over, but for now I must order a quite expensive new battery cover.
Quist said:
Not saying that they haven't made progress, but I used to have a Martin Fields lens protector on my old Omnia i900 and found that the plastic of the lens protector caused hazy pictures even when clean.
I'm beginning to wonder if a liquid solution might be the way to go. Something like clear nailpolish that could be removed and reapplied if it got scratches in it. Anyone hear of something like this?
Click to expand...
Click to collapse
The liquid would have to be perfectly flat and of uniform thickness to prevent refraction, I doubt such an application could be achieved "at home"
I just use a thick gel skin for my phone and a padded microfibre pouch.
The thickness of the skin makes the lens very deeply recessed so it's way safer.
albert_htc said:
I had an old screen protector that I cut a rectangle to cover the lens.
Looks OK but not perfect.
I may try to cut a circle to cover it properly.
Click to expand...
Click to collapse
Lol..u just give me a got idea!! Im going to try it on my sensation!!
Edit: Actualy i already try the rectangular one and its fit perfect. Tomorow i wil try to cut it in round shape one ;P
Sent from my HTC Sensation Z710e using XDA App
take out the lens
Perhaps too obvious, but I knocked out the camera lens in the battery cover. After more than a year still no scratches on the camera itself and perfect pictures (at least, for this camera unit). Protection is sufficient with a pouch.
naimmkassim said:
Lol..u just give me a got idea!! Im going to try it on my sensation!!
Edit: Actualy i already try the rectangular one and its fit perfect. Tomorow i wil try to cut it in round shape one ;P
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
Crap!! It just dont work..after few days dust started to accumulate between the rectangular screen protector and the camera lens. More scratch now!! Crap..crap!! >¦c
P/s: i did try to cut the screen protector round, but the glue of the screen just come out during cutting process..not work also..
Sent from my HTC Sensation Z710e using XDA App
just remove the scratched up bit of plastic and stop worrying, the lens is countersunk below the case anyway,
i removed the plastic lens from my battery cover after having the desire for about 2 weeks, 6-7 months later my pictures still come out as sharp and defined as when new,
if you get any dirt on the camera lens simply take off your battery cover and you can clean it easily,
braddersss said:
just remove the scratched up bit of plastic and stop worrying, the lens is countersunk below the case anyway,
i removed the plastic lens from my battery cover after having the desire for about 2 weeks, 6-7 months later my pictures still come out as sharp and defined as when new,
if you get any dirt on the camera lens simply take off your battery cover and you can clean it easily,
Click to expand...
Click to collapse
The worry part is during clean up the camera lens. If i wipe it with some chemical n tissue, there is a high risk the lens get scratch ;c
Sent from my HTC Sensation Z710e using XDA App
naimmkassim said:
The worry part is during clean up the camera lens. If i wipe it with some chemical n tissue, there is a high risk the lens get scratch ;c
Sent from my HTC Sensation Z710e using XDA App
Click to expand...
Click to collapse
well as i said mines been fine for the last 6-7 months, i just take the battery cover off and give it a wipe with my t shirt or something, no scratches so far,,
braddersss said:
well as i said mines been fine for the last 6-7 months, i just take the battery cover off and give it a wipe with my t shirt or something, no scratches so far,,
Click to expand...
Click to collapse
This may not be necessary!
I've been having this issue for ages too.. i clean the plastic lens but it appears to be scratched as pics come out hazy, just like other posters above. I have just pushed out the plastic lens on the battery cover as suggested and sure enough pics are instantly clearer.. however when inspecting the plastic lens cover i realized two things
* the sticky part is very sticky!
* the inside of the plastic part (the sticky side) appears to be dirty..
i cleaned it with one of those cloths you use for specs and since it's still very sticky i put it back in.. tried a few shots with the battery cover on and off, and i' can't notice any difference.. no longer hazy!
sure though, knocking it out avoids having to clean in form the inside .. but i'm afraid of scratching the inside lens.. that one's more difficult to replace
if you REALLY want to go all out, you could take the cover to a jewler/watch repair and have them replace the glass with sapphire crystal... it's so small that it may not cost an outrageous amount, but then they would have to cut it to size...
Bought myself another battery cover from ebay, I hope this one will last, gonna have to figure out how to maintain that new one scratch-free.
The one I bought:
http://www.ebay.com/itm/130544376251?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Another option for those worried about their lens ...
Amazon ( Sorry, I only found it on the german site ) has this item listed :
http://www.amazon.de/Ersatzglas-Kam...WWGK/ref=sr_1_3?ie=UTF8&qid=1320922089&sr=8-3
It's a saphire glass replacement lens cover for our beloved Desire , and apparently is very scratchproof (according to reviews) . They had a slight quality problem early in the manufacturing process, the first items came out slightly too large, but it seems that's fixed by now ...
I will order one and give it a try , as I have quite bad scratches in mine after 1.5 years of normal use and don't really want to leave the camera itself uncovered
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?
Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.
I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.
You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.
a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.
I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium
just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...
Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore
i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away
blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2
The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.
drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium
Hi everyone
I have a problem with LED and HR monitor glass. When I removed the plastic that came with phone in a few days I noticed little scratches on the glass that cover LED and HR monitor. Its not big deal since it does not affect picture quality nor HR sensor but i came here to ask if there is any way to buy that little plastic protectors for camera and LED-HR monitor glass. Every screen protector kit that I looked does not include protectors for that.
The HR-LED was scratched on my first galaxy s6 too, i took off the plastic cover only to find a big scratch on the actual glass, you and me are not the only ones complaining about this issue.
TheWarKeeper said:
The HR-LED was scratched on my first galaxy s6 too, i took off the plastic cover only to find a big scratch on the actual glass, you and me are not the only ones complaining about this issue.
Click to expand...
Click to collapse
Yes I know that this is a issue with SGS 6. Lot of posts on forums about this problem. I just wanted to know is there any way to buy that little plastic foil just to prevent further scratches and damage. Its not problem to buy some screen protector kit if thats the only way to get that little foil but I cant find anything. Even from Samsung not any help.
Niks321 said:
Yes I know that this is a issue with SGS 6. Lot of posts on forums about this problem. I just wanted to know is there any way to buy that little plastic foil just to prevent further scratches and damage. Its not problem to buy some screen protector kit if thats the only way to get that little foil but I cant find anything. Even from Samsung not any help.
Click to expand...
Click to collapse
There might be but its very small and very specific, since so many people see it scratched they wont bother to prevent further scratching so i dont think that theres a store that manufactures such plastic, you probably have a better chance asking samsung directly but i might be wrong.
I would be more worried about the camera lens than the entire backside of the phone so i usually do something very simple, i always store my phone into a bag of double soft cloth, that way i can feel safe that the phone is protected from all directions.
Use clear nail polish.
Sent from my iPhone using Tapatalk
I can't tell.... and if there isn't I don't want to pick at it and scratch it.
Nope
I just did the exact thing. eBay has the part it's easy to fix I did it. Just don't get the acrylic one. And ask before buying even if the picture looks like the OEM glass one make sure! Unless you want the acrylic one it's less prone to cracking but will scratch.
Sent from my LG-H830 using XDA-Developers mobile app
darkpower_4 said:
I just did the exact thing. eBay has the part it's easy to fix I did it. Just don't get the acrylic one. And ask before buying even if the picture looks like the OEM glass one make sure! Unless you want the acrylic one it's less prone to cracking but will scratch.
Click to expand...
Click to collapse
How did you replace it?
I did actually get the acrylic one, as it is less likely to break again
kchannel9 said:
Nope
Click to expand...
Click to collapse
Ok, this not normal, how did it happened.:fingers-crossed:
kms108 said:
Ok, this not normal, how did it happened.:fingers-crossed:
Click to expand...
Click to collapse
Simply being in my pocket. You'll see on the forums this is happening to a lot of people. The consensus is that LG phoned it in on the camera glass quality.
kchannel9 said:
Simply being in my pocket. You'll see on the forums this is happening to a lot of people. The consensus is that LG phoned it in on the camera glass quality.
Click to expand...
Click to collapse
Yeh, I noticed all the glass problems, am I lucky or what, no problem for me with any problem mention in this forum about the glass built or any other stuff, and I had my G5 from day 1 after exchange it once, but I can remember the reason why I exchanged it.:fingers-crossed:
Just looking back at my camera len, I do have a deep scratch, but lucky I have a PET lens protector on, so it's only the protector that is scratched, at least I do have 3 spare one left.
kms108 said:
Yeh, I noticed all the glass problems, am I lucky or what, no problem for me with any problem mention in this forum about the glass built or any other stuff, and I had my G5 from day 1 after exchange it once, but I can remember the reason why I exchanged it.:fingers-crossed:
Just looking back at my camera len, I do have a deep scratch, but lucky I have a PET lens protector on, so it's only the protector that is scratched, at least I do have 3 spare one left.
Click to expand...
Click to collapse
Yeah I thought the same thing before I pulled the phone out of my pocket, nothing out of the ordinary had happened, and it was mysteriously broken. It's going to be like a recall if it gets really bad...
It doesn't take much pressure to brake it but it doesn't just do it on its own. This isn't the 6p being too tight around the glass and it breaking from expansion @kchannel9 just lift off what's left of your glass and peel it off no need to open the phone up. Just make sure no glass is left in it when you put the new one on. It should come with adhesive. And don't touch the lens! Cover it up if it breaks all the way it out or tape over it if it is just cracked to protect the camera! I might get the acrylic one to put over my glass replacement one now that I see how fragile it is.
Sent from my LG-H830 using XDA-Developers mobile app
It's simple to replace. Mine cracked and I ordered 2 off eBay. I had to replace it for a warranty exchange. Just use tweezers to get under the glass in the crack and peel it out. Insert the new adhesive sticker, then lay the new glass down. Takes about 5-10 minutes.
Sent from my LG-H830 using Tapatalk
Just replaced mine, was easy. The acrylic one I got from eBay/China works fine, though there are visible lines in the acrylic, it did not seem to effect the pictures taken. If I find with more testing that it does, I will get the glass again instead, and also add a glass protector as well. But for now seems fine.
Ok nevermind, after taking some pictures in full sun it is apparent that the acrylic adds a ghostly fuzziness to the images where there once was impressively sharp clarity. Going to order the glass version and a tempered glass protector for that piece as well. Really annoying, you'd think a $700 flagship phone wouldn't have this issue.
kchannel9 said:
Ok nevermind, after taking some pictures in full sun it is apparent that the acrylic adds a ghostly fuzziness to the images where there once was impressively sharp clarity. Going to order the glass version and a tempered glass protector for that piece as well. Really annoying, you'd think a $700 flagship phone wouldn't have this issue.
Click to expand...
Click to collapse
I think it's individual case, just unlucky, my unit is perfect.:fingers-crossed:
This thread's existence would suggest otherwise: http://forum.xda-developers.com/lg-g5/help/cracked-camera-lens-cover-t3351748/page6
My ultra is now 3 months old. I have the burgundy version. Even though I’ve been particular about cleaning it there is a tiny paint chip on the camera
https://imgur.com/Yb9IkHY
small permanent case markings that look like dust particles.
https://imgur.com/hSyYaMo
tried using one of lens wipes to clean it but it didn’t come off.
I’m curious how phones are holding up for you guys.
Still pretty much same condition as when I took it out of the box, already had the case & screen protector waiting so I didn't waste any time when it was delivered.
AlphaTekk Epoch said:
Still pretty much same condition as when I took it out of the box, already had the case & screen protector waiting so I didn't waste any time when it was delivered.
Click to expand...
Click to collapse
I actually didnt notice these small dots. Looked pristine to me but when I was cleaning and saw them in direct light it was noticed. What color do you have? Can you share a photo of the bottom of the phone?
BrokenBee said:
...there is a tiny paint chip on the camera
Click to expand...
Click to collapse
Could you please mark it, it looks ok for me.
ZXR said:
Could you please mark it, it looks ok for me.
Click to expand...
Click to collapse
8 o’clock to the laser autofocus. Small white spec.
Any chance you can post a photo of the bottom of your phone?
Attached.
Leave rhe plastic film on the phone if using a case. Dust scratches the plastic instead.
ZXR said:
Attached.
Click to expand...
Click to collapse
Ah seems like you have it too slightly?
volcolm said:
Leave rhe plastic film on the phone if using a case. Dust scratches the plastic instead.
Click to expand...
Click to collapse
Well I’ll be doing that next time. Already removed em
I was actually surprised how easy the screen has gotten a ton of small little scratches, suppose its my fault for hating screen protectors and cases, finally started using Whitestonedome screen protectors and currently using the latercase.
Surprisingly the back of my phone still looks brand new
Mine is good so far. It comes out of the case every other day and it and the case get a wipe down with a damp cloth. Then dried with a microfiber cloth before going back in the case.
If you leave the phone in the case for long periods of time, abrasive particles will get in between the phone and case and the damage begins.
Mine is doing great. I treat it like my car; I use it as designed, clean it occasionally, and do a little maintenance every so often.
BrokenBee said:
Ah seems like you have it too slightly?
Click to expand...
Click to collapse
I would say no. If you think of this single spot on top, it was most likely a one dust particle.
ZXR said:
I would say no. If you think of this single spot on top, it was most likely a one dust particle.
Click to expand...
Click to collapse
They actually look like dust particles on mine too. They might seem less pronounced given your colour though. Mine wont wipe off completely.
I have the Black one and no scratches toll now (using without case) but camera has small Spot... The white one with no paint on the shell from my friend ist perfekt till now... Think next time i go for white
Put an Otterbox on the device right away but not a screen protector. The screen is extremely prone to micro scratches which can only be seen when screen is off, or with very low backlight and dark image (I've had the device a month an already some prominent micro scratches) . Awaiting screen protectors in the mail. This is a bummer as previous versions of gorilla glass stood up better to micro scratches (never had nearly the micro scratches on my S20 which I ran for 2 years without screen protection) . Pay off I guess for having better shatter protection.
Iv been running case with a naked screen ever since I realized that every protector ive tried affects either swipe typing and more so Spen responsiveness. Thank God tmobile allows you to add insurance to phones they offer regardless if it's bought from them or 3rd parties. The phone is just way to smooth for any obstructions for me.
no scratches