I have partition my sdcard.
1st partition: FAT32 Primary nearly 27 GB
2nd partition: ext4 Primary 2.048GB
and i have mounted the scripts using link2sd
So if i because of some reason remove my sdcard and reboot, will it create any problems?
Sir,
Please understand that XDA Assist is for point new users to find the right place for ask about his devices. You have been already pointed in the right place in 2 threads and I supposed that now you know how to do it.
Prompt [Q] Galaxy grand cm12 kernel
bricking due to kernel vs rom (doubt)
Also for the third time please read carefully this thread:
[GUIDE] [FAT32] [EXT2] [2.3+] How to Partition your Android MicroSD Card
Good luck
Related
Hi All
I'm looking to install this ROM: http://forum.xda-developers.com/showthread.php?t=2234221 on to my galaxy ace and have a question about formatting the SD card for it.
It talks about ext-4 partition and I was wondering what size to format the partition if using an 8gb card?
I was thinking - 1gb for the ext-4 and the rest for fat32?
halp please
What class is your sdcard? Are you planning to use int2sd?
Wysłane z mojego HTC Desire za pomocą Tapatalk 2
pamtayls said:
Hi All
I'm looking to install this ROM: http://forum.xda-developers.com/showthread.php?t=2234221 on to my galaxy ace and have a question about formatting the SD card for it.
It talks about ext-4 partition and I was wondering what size to format the partition if using an 8gb card?
I was thinking - 1gb for the ext-4 and the rest for fat32?
Click to expand...
Click to collapse
You must used the Fire Kernel because you don't have a 4Ext partition
and with Swap kernel and a Sdcard Class 6, you need a 4Ext partition.
So finally, it will depend of the choice of your kernel, and the better choice if you use the Swap kernel, it's to format all in 4Ext
And if you want an another answer, go to post here, you can do without problem
- Galaxy Ace S5830i Q&A, Help & Troubleshooting
or here: Galaxy Ace S5830 Q&A, Help & Troubleshooting
philos64 said:
You must used the Fire Kernel because you don't have a 4Ext partition
and with Swap kernel and a Sdcard Class 6, you need a 4Ext partition.
So finally, it will depend of the choice of your kernel, and the better choice if you use the Swap kernel, it's to format all in 4Ext
Click to expand...
Click to collapse
I am going to get a class 10 8gb card this weekend. the swap kernel is what I was going to use.
Why should I format the whole card in 4ext? If I do that, I won't be able to add files from my windows 7 PC will I??? I just don't know much about ext4. I do store some music and stuff on it.
Thanks so much for your help
pamtayls said:
I am going to get a class 10 8gb card this weekend. the swap kernel is what I was going to use.
Why should I format the whole card in 4ext? If I do that, I won't be able to add files from my windows 7 PC will I??? I just don't know much about ext4. I do store some music and stuff on it.
Thanks so much for your help
Click to expand...
Click to collapse
Which recovery do you use ?
I wrote a mistake about to format whole sdard to 4Ext
1 - You must have 1 Fat32 partition and 1 EXT4 partition on your sdcard
2 - If you rather use a computer for creating and formatting partitions keep in mind that both partitions must be primary partitions (not logical)
3 - The recommended size of your EXT4 partition is depending on how many roms and apps you are going to install.. 512M is the minimal size
Go to one of the links that I've wrote above and sent your question.
philos64 said:
Which recovery do you use ?
I wrote a mistake about to format whole sdard to 4Ext
1 - You must have 1 Fat32 partition and 1 EXT4 partition on your sdcard
2 - If you rather use a computer for creating and formatting partitions keep in mind that both partitions must be primary partitions (not logical)
3 - The recommended size of your EXT4 partition is depending on how many roms and apps you are going to install.. 512M is the minimal size
Go to one of the links that I've wrote above and sent your question.
Click to expand...
Click to collapse
Thanks, I didn't see your links in the first post. Will go check them out. at the moment I have the base CM7 ROM on the phone if that helps with which recovery I use.
again thanks heaps!!! and I will go to those links now
wanted to know why I can not create assembly scripts in Link2SD to CM11,
and on CM10.1 I can.
Script Error Mount
mount: Invalid augment
or
mount: No such device
I already partitioned my sd card
1st partition: FAT32
2nd partition: ext4
some say the problem and that the cm already has its own directory /sd-ext2
sorry my bad english
Hi there,
Founded a guide for solve this problem. Try it but do a backup before start anything.
[CM11 Guide] How to Link2SD Extreme Much More Intermal Memory
Good luck
Good evening XDA developers
I'm sorry if I am double posting or reposting same/related topic again but I swear I've searched the forum for week now but I cannot find the answer so I've decided to post a new thread to seek for a good help.
Here's the situation for you to completely understand my need,
I've got this Sony Xperia Ray (2011) - received from my brother because he bought a sony xperia Z3.
I've modified it and install Xperia Overlay rom on it. But as we all know, Xperia Ray had a very few internal memory. I've tried to install int2ext script on it and successfully got 1 gig internal device, but upon installation of apps from the playstore. I still got "insufficient storage" error though the phone still got a 500 mb free.
Now here's what I think will work, I think maybe I can use link2sd together with int2ext. but I cannot try because I'm not good at scripting.
I got this 32 gb microsd (class 10), I partitioned it this way:
1st: fat32 - 23gb - use as external sdcard
2nd: ext2 - 1gb - use for int2ext script
3rd: ext4 - 8gb - plan to use for link2sd
Problem is I cannot mount link2sd on the third partition, could you show me how to modify 11link2sd file to force it to mount the script on the third partition?
Thank you so much..
Hi there,
You can ask for help directly in the Link2SD official thread here:
[APP][1.6+] Link2SD
Good luck
Device- Samsung Tab2 GT-P3113 4.2.2 Rooted, CWM Recovery
Issue/Error-"Mount Script Error"
Mount script cannot be created-Your/system partition has not enough storage space
History
Partitioned 32gb ext sd card with minitool- Fat32 2.7 gb ext2 27.9 gb(probably the issue), it mounted fine & used Link2sd on stock rom, everything worked perfect. Flashed a new rom in rom manager, when i rebooted i got this error message. Should i restore stock rom & repartition sd card more evenly between fat32 & ext2 or change ext to 3 or4 or both. Or am i way off lol
Hello, thanks for using XDA Assist.
To solve your problem and get better answers, you can post in your dedicated help section for your device here
http://forum.xda-developers.com/galaxy-tab-2/help
Good luck.
i created a 2nd partition on my sd card as ext2 to use it as a internal memory by using link2SD . but i am unable to use it. as the mount script is not forming.
i have stock rom.
pls help ASAP...................
sikdarsaurav10 said:
i created a 2nd partition on my sd card as ext2 to use it as a internal memory by using link2SD . but i am unable to use it. as the mount script is not forming.
i have stock rom.
pls help ASAP...................
Click to expand...
Click to collapse
Hi, Thank for using XDA assist
There is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get expert's help.
Good luck.