Below is the procedure to FACTORY REST, ROOT AND MArket installation for COBY KYROS MID7010 or MID 7010 Tablet owners stuck at white boot screen OR android OS not loading after any manipulation with the firmware OR interested in rooting and installing google market.
FACTORY RESET Steps:
1. Turn OFF the device
2. Make sure its turned OFF
3. Press and hold simultaneously POWER + BACK + HOME buttons (as in third Pic)
4. The device turns on with COBY logo, keep pressing......
5. After about 15 to 20 seconds the COBY LOGO display changes and prompts to press the keys again within 5 secs to factory reset the device.
6. LEAVE the power button now while still pressing HOME and BACK keys
7. FActory reset is initiated!
TO INSTALL MARKET AND ROOT:
1. Enable adb debugging on your tablet,connect to pc wait for driver installation if any. Run SuperOneClickv2.3.2-ShortFuse.zip > choose advance> driver install
2. Will prompt to force install drivers ( if the adb device drivers not available), accept and sit back! the program will not respond for a while 10-15mins and prompts back that the drivers are installed.
3. Run root from the above software (clicking root tab)
4. Open root explorer or any file browser accepting root, browse to system/app copy all files in attached folder (apks) here, if prompts to rewrite( do not allow!)
5. Change permissions of the copied files as in other apks in system/app folder.
6. Google market app appears in app drawer.
7. Run and Enjoy!
thnks for the useful thred
thanks a lot for this thred since no one is taking care of this model "7010" .. my kyros 7010 stop working and freez on android booting screen a did the method you post here but i got this message
" Unexpected updater mode! Pleas reboot your device"
could you pleas support me with any help since i am olmost about to lose the hope to get my Kyros back to life
Follow the buttons, you arent pressing hard the back button. its HOME + BACK+POWER all three buttons altogether. until the coby screen changes to reset request as in pics. Ask someone to press the power button while you press the front two. UNTIL THE COBY LOGO display changes (15 to 20 seconds).
the same problem
really i tryed it ten times and got the same message " unexpectaed updater mode please reboot your device"
it gives me Penguin logo "Linux logo" befor this message - this logo is normally comes even befor it stop working
pressing the power button + home button only displays your message. You are definitely not pressing back button hard enough or its broken?!?. TRy pressing power than reset pin at back together. a white screen appears release both buttons and try the three button combination again.
YOU must apply steady pressure on the three buttons for 20 seconds till the coby logo screen automatically changes. Ask someone else to help you with it. THIS KEY COMBINATION DEFINITELY WORKS!
the same problem
i did the power + reset and yes it gives me a white screen then use the three buttons "i am sure i pressed them well"
the coby logo screen changes to Penguin logo "Linux logo" and it gives me the same message
i feel that i am breaking your head but you are the only hope that i have no more help on this model .. so can i do that throw ADB i did root it using adb and whin i tybe # recovery it gives me (android system recovery <e3>) with 3 choces to restor or reboot somthing like that but non of them are working i can choose between them but i cant select or confirm i tried all the buttons but no action
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
i releas them after i swe the message "unexpectaed updater mode please reboot your device" and i try to wait more than one min as well
and yes i am sure it is coby kyros MID 7010. i got it from Dubai as a present
i know there is no recovery partition as i read it a lot on the internet.
so do u have any recovery rom for that model or any other way to install system on it???
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
rooting
i did everything and then when i connect the device via usb (after debugging n since there is no unmount) superoneclick does nothing, no driver update nothing, it just stays there, n if i click root, it hangs(super). m i doing something wrong?
it hangs! thats the point..... it takes time. Does it prompt to force install drivers yes:no?
the program will not respond for a while
Click to expand...
Click to collapse
Where does it freeze? ADB kill server> ADb start server>?
stuck on android logo after factory reset
mughalgxt said:
when do you release the three buttons? Are you sure its mid 7010 there is no recovery rom partition in mid7010 as far as i know.
Click to expand...
Click to collapse
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
kernel
mughalgxt said:
Since there is no recovery partition than A kernel is required to repartion the partition table WHICH IS NOT EASY and since there is a way to factory reset why would one bother. i don't understand how you got to recovery menu when there isnt any? Besides have retried the steps and they work all the time. MOSt probably your return key is damaged!
Click to expand...
Click to collapse
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
magus1982 said:
Hi, i also have the same problem. Im stuck on the android logo after i did a factory reset. I tried the three button combo u instructed but im stuck always on the coby logo if i hold the three button.
Any help will do. Thank you
Click to expand...
Click to collapse
You have to keep holding the three buttons the Coby LOGO display will change after 20-30 secs. ANDROID logo means the reset is done and the OS is loading will take time after reset. blank black screen means the Os cannot load hence factory reset must be done. Which logo are you stuck with?
sherif.afifi said:
aftry month now of trying every thing to get this kyros to life again but failed ... i think as u said a kernel is the only hope now .. hope i found some one to help in how can i do that
Click to expand...
Click to collapse
Your final hope is getting the back button repaired or ask someone else to do the reset procedure for you. No one is going to create a kernel for you. or for coby. try kyros forum website see if you persuade someone for more TECHNICAl support. I believe your tab's back button is damaged.
I have the Coby Kyros MID7010wc and I followed those steps, but it didn`t work - google market icon didn`t show up on apps screens. I tried to run those apks but it always says "application is not installed".
Is there something else that I can do?
did you root the device successfully?
how did you change the permission of the files in the attachment after pasting them into /system/app folder?
did you restart the device after above step?
* You need not manually install anything as it wont work just copy and paste them into system/app, change permissions and restart.
Yes it is rooted - used SuperOneClick
I didn`t understand when you said "if prompts to rewrite( do not allow!) "
if I don`t overwrite the apks it won`t install the files.
Anyway, used root explorer and copied each apk one by one in the system/app folder then changed the permission (checked every fields).
Did you reboot the system after changing permissions? Overwriting all apks in the attachment to system/app is not required rather unnecessary as google framework already exists only missing is phonesky or android market. These steps worked for me try reading other mid7xxxx threads to cross check
I redone everything and it is working as expected.
thanks!
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
raza.javaid said:
Hi all,
I am new towards rooting phones and installing Roms. I bought a used Motorola XT910 today and it seemed to have a Korean version of gingerbread installed on it. As soon as I got home I downloaded the first stock Rom I could find on the internet for Asia and installed it on the phone. I followed the instructions in the below mentioned video and the phone is now completely bricked.
I just Googled " how to unbrick motorola xt910" and followed the instructions in the 6:09 video that comes up by RAZRGUY.
I've spent hours and hours on the internet looking for a solution but cannot find any. please help me. I'm getting the message now that I cannot install cos the battery is low. it won't charge and keeps booting up even when I try to shut it down.
Please help!!
Click to expand...
Click to collapse
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Hey,
The usual procedure is just to Hard Reset.
To do this, try
Step 1) With the phone off, Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously then while continuing to hold the VOL UP+ & VOL DOWN- buttons Press and Hold the POWER button till a menu appears.
Step 2) Use the VOL DOWN- button to navigate the menu & the VOL UP+ to select the RECOVERY option.
Step 3) When presented with a logo with an exclamation mark! Press & Hold the VOL UP+ & VOL DOWN- buttons simultaneously to bring up the next menu of options.
Step 4) Use the VOL DOWN- button to navigate the menu & the POWER button to select the Wipe data / Factory reset option.
Step 5) Use the VOL DOWN- button to navigate the menu to confirm this selection. Press the POWER button to begin the Factory Reset. (This may take a few minutes just be patient and wait.
Step 6) Once the task has completed press the POWER button to restart the device.
Source: Hard Reset Site
Or you may want to try manually flashing the original software to reset it back. You could try using flashtool.
Or You could contact the RC Help Chat 24/7
http://forum.xda-developers.com/showthread.php?t=1878241
Tell them what I said so they know where to go.
Thread Type: Can I haz Brick?
Hit Thanks if you found this useful
Silverlink34 said:
I can try to help you as I have an xt912, very similar but there is some difference. My Razr is CDMA/Verizon yours is GSM international.
First of all, when you turn on your phone, how far does it get? Red Moto M, then the bootanimation loops? or does it go from red moto m to black screen?
Click to expand...
Click to collapse
Yes it takes me to the black boot up screen. I've tried charging and the phone charges up as well! That's a good sign!
Moto razr pricked and battry low
hi gays i thing this is my first time..i have Motorola razr xt 19 running ISC 4.0.4 I tried to flash cm 10 mod via recovery i do factory reset and i
formatting system when i reboot the phone it's stock on cm10 boot, more then an hour i have try to flash the oregnal fast-boot XML zip via RDS
but it's giving me that battery low fall, and i have try to charge the but its not charging???? please gays i need your help hot to charge the battery
sorry for my bad English
Today I purchased my Moto G 2nd Gen. I did not get time to explore it & charge it properly. Suddenly I saw black screen with the following messages
AP Fastboot Flash Mode (S)
..
..
Battery OK
Device is LOCKED. Status Code:0
Connect USB Data Cable
Boot Mode Selection Menu
Vol Up Selects, Vol Down Scrolls
Normal Powerup
Recovery
Factory
Barcode
BP Tools
hab check failed for systems
failed to validate system image
Fastboot Reason:Fall through from normal boot mode
I tried pressing the vol Up for several time but my phone is not booting
Can you experts please help me to boot my Moot G?
Thanks in advance
Niladri
Select factory reset with vol~down. And press vol~ up
martinusbe said:
Select factory reset with vol~down. And press vol~ up
Click to expand...
Click to collapse
vol-down & vol-up were not working. Now it is totally shut down.I'm not able to restart also
ch.Niladri said:
vol-down & vol-up were not working. Now it is totally shut down.I'm not able to restart also
Click to expand...
Click to collapse
Don't bother playing with it, just take it back to the shop and ask for a new one
You obviously can't tamper with the device if it's bootloader is still locked so there is no reason they don't exchange a new one for you
I thing your battery is dead charge your phone and then power on your phone.
My moto g updates to lollipop since then ...I am unable to download anything. Download starts initially and then notification bar foes off.
Later it shows download unsuccessful. For the said file data is consuming. Plz help to sort out this problem
[email protected] said:
My moto g updates to lollipop since then ...I am unable to download anything. Download starts initially and then notification bar foes off.
Later it shows download unsuccessful. For the said file data is consuming. Plz help to sort out this problem
Click to expand...
Click to collapse
Hi, you may want to perform a factory restore from the recovery menu of the phone. The easiest way to do this is to hold the volume down/power buttons when the phone is turned off to boot into boot loader. Once into bootloader select recovery and press volume up/down. Then just reset.
Hello,
I have a moto g3 xt1541 and I wanted to reset the device in the settings but my phone got stuck while resetting: it kept on loading with a message " formating data" or something like that and after 10 min I just pressed the power button and the screen frozen.
I could reboot by pressing 10s the power button and nothing was deleted.
I had to use the recovery to wipe data.
That happened with 5.1.1 and also 6.0.1.
Does anyone have any idea?
Thanks in advance!
nubry said:
Hello,
I have a moto g3 xt1541 and I wanted to reset the device in the settings but my phone got stuck while resetting: it kept on loading with a message " formating data" or something like that and after 10 min I just pressed the power button and the screen frozen.
I could reboot by pressing 10s the power button and nothing was deleted.
I had to use the recovery to wipe data.
That happened with 5.1.1 and also 6.0.1.
Does anyone have any idea?
Thanks in advance!
Click to expand...
Click to collapse
You don't specifically say it but I am assuming stock, locked bootloader.
Just ignore settings and do it in recovery.
Yeah sorry my phone has never been rooted and the bootloader is locked.
Thanks for your fast reply !
You need to wait more... Factory Reset can take 20+ minutes on this device. Otherwise do it through recovery or use fastboot erase commands.