Hello all xda brothers
I have a qmobile A500 quadcore mtk6589 chipset mobile
I got this mobile from a friend
earlier its camera wasnt also not working and gave the errror : cannot connect to camera
i flashed it through Sp flash tools (a stock rom 4.2.1)
then restored Imei by Mtkdroid tools
now camera is working imei is working (Sim).
But
Wifi and bluetooth is not working both of their MAc addresses are also shown unavailable in ,,, settings>about phone> status ! .... When i click turn wlan on it just stays there and comes back to off auto.. without turning on wlan .... its same problem with bluetooth
any body who can help? i would really appreciate it.
Related
Hello there,
I'm not able to connect my Android phone to WiFi
It only says "Connecting" & then "Saved,secured with WPA"
Request your help to get my phone connected to WiFi.
My phone details are-
Karbonn S5 Titanium
Android 4.1.2
Kernel: 3.4.0-perf-g8ca40f4
Build: TBW593315_8764_V006012
Even I have the exact same issue. I am using a BSNL Huawei/Quidway WA-1003A router.
It says connecting and then says Saved & secured with WEP
I noticed that S2 has 4.1.2 and my other phones (Samsung Note 1 & Micromax A110) with 4.1.1 are connecting to the same router perfectly fine.
Any pointers? I read somewhere that 4.1.2 doesn't support some 802.xx standards and a patch needs to be done on old routers or one needs to go for a new router. Is that correct?
Karbonn S5 + WIFI Issue
khan_sultan said:
Even I have the exact same issue. I am using a BSNL Huawei/Quidway WA-1003A router.
It says connecting and then says Saved & secured with WEP
I noticed that S2 has 4.1.2 and my other phones (Samsung Note 1 & Micromax A110) with 4.1.1 are connecting to the same router perfectly fine.
Any pointers? I read somewhere that 4.1.2 doesn't support some 802.xx standards and a patch needs to be done on old routers or one needs to go for a new router. Is that correct?
Click to expand...
Click to collapse
I have the same issue with my Karbonn S5 handset, it is not able to connect to my WIFI router, the other phones are connecting properly. Please let me know if there is any fix for this issue.
DhirajA said:
I have the same issue with my Karbonn S5 handset, it is not able to connect to my WIFI router, the other phones are connecting properly. Please let me know if there is any fix for this issue.
Click to expand...
Click to collapse
I've installed Connectify HotSpot on my Laptop. I connect my Laptop to my WiFi router, then I connect my S5 to Connectify.
This is a workaround as there is issue with the WiFi router image & which can;t be upgraded further since it is a old one with no support.
HTH
Did anyone find a solution to this problem?
I am having the same problem with my Micromax A111....can anyone suggest me a solution for that
Solution Found
The problem is with the DHCP Configuration.....To solve this access your router and go to Set Up>DHCP Configuration and select Server On....Than go to the Advanced Tab on top and go to Wireless Settings.....Once there Save all & Restart Access Point at the bottom of the window and you will be done
I need help!!!!!
Even i am facing the wifi problem in my karbonn titanium s5!:crying:
please help me ! really deprived:crying:
i m not able to turn on my wifi..in my karbonn titanium s5
Hi there I have a panasonic p31
And since 3 days my wifi bar has been coming grey
My playstore comes up network error but my browser is working
I check other devices but not problem!!! I then did a factory reset
Anr after when I tried I could not connect to google
It came cannot reach or call customer care.....
Please help!!!!
want tutorial for panasonic p31 development
dev's plz kindly post how to install stock original firmware for pansonic p31plz my phone got always hanging....................................
back up ur current rom and send me i solve ur problems
Hi there....
I am using Micromax Unite 2 . Recently I erased all the system using SP Flash tool and i don't made any NVRAM backup. So it was showing IMEI error and nVRAM wifi error . I have fixed them all but now the issue is the 3G mode. 2G mode working perfectly but when i changed the network mode to "Always 3G " the operator signal gone. So i am unable to use 3G services. Plz help me to solve this problam....
sampadmad said:
Hi there....
I am using Micromax Unite 2 . Recently I erased all the system using SP Flash tool and i don't made any NVRAM backup. So it was showing IMEI error and nVRAM wifi error . I have fixed them all but now the issue is the 3G mode. 2G mode working perfectly but when i changed the network mode to "Always 3G " the operator signal gone. So i am unable to use 3G services. Plz help me to solve this problam....
Click to expand...
Click to collapse
Maybe it's best to start all over and flash back the stock firmware.
You can check this thread. CWM recovery for Micromax Unite 2 / Myphone Rio Lite.
And if you have further questions, please ask in the [Q&A] Micromax Unite 2 Root and Custom Recovery thread.
Good luck !
Thread closed and thank you.
Hello,
please help me. A friend of mine has tried a CM12.1 build for your device (Alcatel IDOL 3 Android 5.0.2 - snapdragon 615 SOC almost svanila android stock firmware). Hestuck on bootloop so he tried to get back by restoring a backup from TWRP Recovery.
But now he has no WIFI MAC adress no IP adress no BT adress. Calls, mobile data and so on is working besides the wifi and bluetooth (because he has no mac adress).
How can we obtain or reset the wifi modem or osmething like that.
thanx for your help
Hi guys .. can you share the backup NVRAM.bin of your phone 'cuz i have a problem of my unit my phone detects a sim name of our carrier but it says NO SERVICE, both sims, in Wifi also it can detect wifi networks but can't connect, also in bluetooth, i always refresh it to scan but cannot found nearby devices, and also when i used the wifi-hotspot to activate the Shareit apk but it says restart hotspot, it keeps restarting .. i think the NVRAM has been damaged
last time i've remembered, this phone was deadboot and i flashed the firmware through SP Flash Tool .. i've used FORMAT ALL + DOWNLOAD option, it's working now but i cannot use the wireless connections .. when i checked the scatter firmware, there is no nvram.bin on the folder
someone else here who has a good heart to share his NVRAM or full backup rom ?? much better if its already flashable
i hope you would help me out
XDA Visitor said:
Hi guys .. can you share the backup NVRAM.bin of your phone 'cuz i have a problem of my unit my phone detects a sim name of our carrier but it says NO SERVICE, both sims, in Wifi also it can detect wifi networks but can't connect, also in bluetooth, i always refresh it to scan but cannot found nearby devices, and also when i used the wifi-hotspot to activate the Shareit apk but it says restart hotspot, it keeps restarting .. i think the NVRAM has been damaged
last time i've remembered, this phone was deadboot and i flashed the firmware through SP Flash Tool .. i've used FORMAT ALL + DOWNLOAD option, it's working now but i cannot use the wireless connections .. when i checked the scatter firmware, there is no nvram.bin on the folder
someone else here who has a good heart to share his NVRAM or full backup rom ?? much better if its already flashable
i hope you would help me out
Click to expand...
Click to collapse
Hi,
There's no dedicated forum for your device here in XDA.
Kindly register yourself at XDA post which you can query in Android Q&A,Help and Troubleshooting.
Experts there may be able to help you