Hi there....
I am using Micromax Unite 2 . Recently I erased all the system using SP Flash tool and i don't made any NVRAM backup. So it was showing IMEI error and nVRAM wifi error . I have fixed them all but now the issue is the 3G mode. 2G mode working perfectly but when i changed the network mode to "Always 3G " the operator signal gone. So i am unable to use 3G services. Plz help me to solve this problam....
sampadmad said:
Hi there....
I am using Micromax Unite 2 . Recently I erased all the system using SP Flash tool and i don't made any NVRAM backup. So it was showing IMEI error and nVRAM wifi error . I have fixed them all but now the issue is the 3G mode. 2G mode working perfectly but when i changed the network mode to "Always 3G " the operator signal gone. So i am unable to use 3G services. Plz help me to solve this problam....
Click to expand...
Click to collapse
Maybe it's best to start all over and flash back the stock firmware.
You can check this thread. CWM recovery for Micromax Unite 2 / Myphone Rio Lite.
And if you have further questions, please ask in the [Q&A] Micromax Unite 2 Root and Custom Recovery thread.
Good luck !
Thread closed and thank you.
Related
the phone is showing invalid imei in micromax canvas 2 plus and i tried all possible method but doesn t work
ravigpt94 said:
the phone is showing invalid imei in micromax canvas 2 plus and i tried all possible method but doesn t work
Click to expand...
Click to collapse
Try restoring by engineering mode. If that doesnt work i think your baseband may have gone unknown. So to fix that flash stock rom by sp tools
hi guys,
i have this phone Micromax Canvas 2+ A110q, and i can't switch it on anymore. Well the problem started when i manually changed the time (turning off the network time) and after a while an Error flashed (Ui is not responding or something), though i could use it but the error kept appearing every 3-5 seconds, it kinda pissed me off so i switched it off and can't switch it on eversince. So Please if there is anyone who can help...please let me know
I am requesting to have this thread moved to the right forum.
Solution to your problem
XDA Visitor said:
hi guys,
i have this phone Micromax Canvas 2+ A110q, and i can't switch it on anymore. Well the problem started when i manually changed the time (turning off the network time) and after a while an Error flashed (Ui is not responding or something), though i could use it but the error kept appearing every 3-5 seconds, it kinda pissed me off so i switched it off and can't switch it on eversince. So Please if there is anyone who can help...please let me know
Click to expand...
Click to collapse
Dude try going to the Recovery Mode of the A110Q or flash the stock rom through SP Tools. If you cannot do that or Phone does not boot up ,please take ur phone to the Micromax Service Centre and get its repaired.
Thanks.
Hi,
Yesterday afer root of my mmx magnus a117, I tried to install recovery with help of TWRP manager but after that I face issue of my network signal, this is due to loss IMEI, so I tried to slove this issue with help of mobileunkle tool to go in engineer mode to feed IMEI no but its not working, as it show my Radio state off.
My phone SIM managment is also got inactive ( greyed out ).
Please can some one help me on this....
Hi devs,
I've flashed my mmx unite 2 A106 using SP flash tool to revert back to stock rom kitkat from miui 7. Now NO SIM detected, Showing UNKNOWN BASEBAND, UNKNOWN IMEI, I've tried various method available in Net to fix..
In mmx care they asked to replace mother board...
Pls anyone help me to resolve this...
Many thanks in advance :fingers-crossedlss
Try rewriting IEMI and Baseband
Maddy18 said:
Hi devs,
I've flashed my mmx unite 2 A106 using SP flash tool to revert back to stock rom kitkat from miui 7. Now NO SIM detected, Showing UNKNOWN BASEBAND, UNKNOWN IMEI, I've tried various method available in Net to fix..
In mmx care they asked to replace mother board...
Pls anyone help me to resolve this...
Many thanks in advance :fingers-crossedlss
Click to expand...
Click to collapse
It is not much big issue for now i would advice you to rewrite iemi and baseband
to your A106 there is no need for motherboard change i will give you links for fixes
if you have a custom recovery installed...
The same happened to me..
https://drive.google.com/open?id=0BwnngESBPdQBZ2xJREdPQm5FNjA
https://drive.google.com/open?id=0BwnngESBPdQBV2V4SnFFWk1yeU0
https://drive.google.com/open?id=0BwnngESBPdQBVUJiM0NDTVNHSFk
Maddy18 said:
Hi devs,
I've flashed my mmx unite 2 A106 using SP flash tool to revert back to stock rom kitkat from miui 7. Now NO SIM detected, Showing UNKNOWN BASEBAND, UNKNOWN IMEI, I've tried various method available in Net to fix..
In mmx care they asked to replace mother board...
Pls anyone help me to resolve this...
Many thanks in advance :fingers-crossedlss
Click to expand...
Click to collapse
This is not a big problem See the below post :
In this method you don’t need any PC you can do this just in your phone by following steps:
1. Download the Mobile Uncle Tool from Play Store
2. Open it and grant superuser permission(it will ask automatically)
3. Open Engineering Mode and then Tap on Engineering Mode(MTK)
4. Select Connectivity then CDS Information >Radio Information
5. You will get Options – Phone 1 and Phone 2
6. Select “Phone 1” then you will get screen as shown in screenshot 6
7. Select AT+EGMR=1,7,”your imei”(write your IMEI for sim1 in double quotes)
8. Then press button “SEND AT COMMAND” and Reboot your phone
9. Similarly, for second IMEI select “Phone 2” then you will get screen as shown in screenshot 9
10. Select AT+EGMR=1,10,”your imei”(write your IMEI for sim2 in double quotes)
11. Then press button “SEND AT COMMAND” and Reboot your phone
Now your both sim will work properly?
HIT THANKS IF IT HELPED!!! :good:
Yesterday i attempted to flash my micromax a106 unite 2 using sp flash tool. I am new to flashing and it was my third attempt(first lenovo,then samsung and now micromax) to flash a rom. But this time the flash went wrong somewhere, and now phone is not turning on or even charging. I can feel the heat from the camera part inside the phone, so i assume its working. Any chance of saving it??? I cant also flash the phone now. It says
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
After some minutes of clicking the download button in sp flash tool.
I installed the mtk usb drivers too. I can heard the pc making connect sound once usb is inserted and also hear disconnecting too...Please do help me.
Is the problem solved?
Micromax A106 Unite 2 dead After Flashing
My Micromax A106 Unite 2 is dead After Flashing not power on plzzz help me :crying:
santoshk155 said:
My Micromax A106 Unite 2 is dead After Flashing not power on plzzz help me :crying:
Click to expand...
Click to collapse
Explain in brief what have u done that leads to the problem (dead of phone)?
Flashed what?
Flashed using sp tool or some app?
Explain your problem in deep so that i or anyone else can help
Don't worry no mobile can be permanently dead, we just have to flash the stock ROM of the respective mobile:fingers-crossed::good: