the phone is showing invalid imei in micromax canvas 2 plus and i tried all possible method but doesn t work
ravigpt94 said:
the phone is showing invalid imei in micromax canvas 2 plus and i tried all possible method but doesn t work
Click to expand...
Click to collapse
Try restoring by engineering mode. If that doesnt work i think your baseband may have gone unknown. So to fix that flash stock rom by sp tools
Related
Hey, I am currently using micromax canvas A111. I had purchased this phone 1.3 years ago.
After having a look a all the posts at XDA, I tried to do the same but FRAMAROOT gives error saying
"FAILED ... try another exploit"
and sometimes when you click on Gandalf, the phone gets hanged for 8-10seconds and then returns back to homescreen.
Is there any other way to root my phone??
vroot
Bhuri25 said:
Hey, I am currently using micromax canvas A111. I had purchased this phone 1.3 years ago.
After having a look a all the posts at XDA, I tried to do the same but FRAMAROOT gives error saying
"FAILED ... try another exploit"
and sometimes when you click on Gandalf, the phone gets hanged for 8-10seconds and then returns back to homescreen.
Is there any other way to root my phone??
Click to expand...
Click to collapse
try vroot ,Google it
:angel:
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
never root the phone with something it is not meant for unless you are developing it yourself specially for you device. Every device has its limitation and speciallity and the rom is designed for it, You use it you are heading for a motherboard replacement
The only solution
amanraj65 said:
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
Click to expand...
Click to collapse
you have hard bricked your phone.
google about how to recover from hard bricked mmx unite 2
if this help press like
try reflash with original firmware.
I hv the same prblm with my unite 2 and i went lots of repairing center bt they are not able to repair the phone because its not detecting by usb cable and then I went to micromax customer care and they told me the phone will b repair bt u r not in warranty because of rooted fon you have to pay 1800rs then my phone will come in working condition.
so go to your nearest mmx cstmr care and cunsult with them.
My micromachining unite 2 is not opening . And factory reset also not coming. When switch on the phone it just blink micromax
amanraj65 said:
Hi, I have and Micromax Unite 2(A106) 8gb model
I want to downgrade it to Jellybean for installing custom rom but the phone was not booting up into recovery mode after flashing with SP TOOLS. :crying: So it formatted the phone using SPTOOL AUTOFORMAT.
Now the phone is neither turing on nor detecting the usb cabel without battery.
Plzzz help me
Plz:crying:
Click to expand...
Click to collapse
Hello... You can unbrick your device...
Download original micromax a106 firmware from firmwarefile.com and try to flash it...
I hope it will work for you...
And You are saying that you want to downgrade your device to jellybean for installing rom but in real our device don't have official jellybean firmware our device have only lolipop and kitkat official firmware...
So i think you installed wrong firmware so try to flash original firmware...
You can install any roms from kitkat firmware...so You don't need to downgrade your device to jellybean...
Good Luck...
Whoops... Sorry... For late reply... Your device bricked in November 2014 so i think you repaired your device in 2014 or 2015 but i hope this reply can help another user...
Manish Kumawat said:
Hello... You can unbrick your device...
Download original micromax a106 firmware from firmwarefile.com and try to flash it...
I hope it will work for you...
And You are saying that you want to downgrade your device to jellybean for installing rom but in real our device don't have official jellybean firmware our device have only lolipop and kitkat official firmware...
So i think you installed wrong firmware so try to flash original firmware...
You can install any roms from kitkat firmware...so You don't need to downgrade your device to jellybean...
Good Luck...
Whoops... Sorry... For late reply... Your device bricked in November 2014 so i think you repaired your device in 2014 or 2015 but i hope this reply can help another user...
Click to expand...
Click to collapse
Hey I need help...my mmx unite 2 is hard bricked and can't flash through sp flash tool
last year in november.....i also hard bricked my mmx unite 2 like this only... and guess what....now i have moto g3 and that new looking mmx unite 2 is still there in my bag but unfortunately its completely unresponsive....i still google sometimes and also visit xda to find solution to get back it in working condition...but i dnt find anything...so guys if anyone of u finds solution to that prblm..plzz let me knw...
I have micromax unite 2 phone.My problem is the phone is just showing the logo when starting and it is not moving further.everything i have checked but the condition is same.help me out other than hard reset.
Search and find solution for boot loop
Hi there....
I am using Micromax Unite 2 . Recently I erased all the system using SP Flash tool and i don't made any NVRAM backup. So it was showing IMEI error and nVRAM wifi error . I have fixed them all but now the issue is the 3G mode. 2G mode working perfectly but when i changed the network mode to "Always 3G " the operator signal gone. So i am unable to use 3G services. Plz help me to solve this problam....
sampadmad said:
Hi there....
I am using Micromax Unite 2 . Recently I erased all the system using SP Flash tool and i don't made any NVRAM backup. So it was showing IMEI error and nVRAM wifi error . I have fixed them all but now the issue is the 3G mode. 2G mode working perfectly but when i changed the network mode to "Always 3G " the operator signal gone. So i am unable to use 3G services. Plz help me to solve this problam....
Click to expand...
Click to collapse
Maybe it's best to start all over and flash back the stock firmware.
You can check this thread. CWM recovery for Micromax Unite 2 / Myphone Rio Lite.
And if you have further questions, please ask in the [Q&A] Micromax Unite 2 Root and Custom Recovery thread.
Good luck !
Thread closed and thank you.
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
jeevan123 said:
I was trying to root my unite 2 using sp flash tools but it failed and my mobile is not switching on even it is not getting charged but it is detected by pc.Can someone tell any solution
Click to expand...
Click to collapse
If its detected by PC, then using SP flash tools, try flashing a new ROM again... and it should be back to normal again....
when iam flashing to my mobile error occurred that ERROR 4032 : Enable DRAM failed! what i do >? plz help me i am downgrading to lollipop to kitkat help me please
Did anyone found the solution?
i need the same information
i am also unable to format my previous rom...................
plz help
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
[email protected] said:
i have micromax unite 2.my phone was hard bricked.and i tooked it to the repair shop where he opened my phone,did something wit it then next day he returned me my phone saying it will not work.....after few days i again tried sp flash tool to just gave it a check and i was able to flash new rom to it .now my phone is booting up i heard the bootup sound,even the volume rockers are working but it is showing nothing on the screen .what would be the problem....plz help
Click to expand...
Click to collapse
take it to micromax care they will flash stock software to it . i had same problem a year ago
Yesterday i attempted to flash my micromax a106 unite 2 using sp flash tool. I am new to flashing and it was my third attempt(first lenovo,then samsung and now micromax) to flash a rom. But this time the flash went wrong somewhere, and now phone is not turning on or even charging. I can feel the heat from the camera part inside the phone, so i assume its working. Any chance of saving it??? I cant also flash the phone now. It says
BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)
[BROM] Can not pass bootrom start command! Possibly target power up too early.
After some minutes of clicking the download button in sp flash tool.
I installed the mtk usb drivers too. I can heard the pc making connect sound once usb is inserted and also hear disconnecting too...Please do help me.
Is the problem solved?
Micromax A106 Unite 2 dead After Flashing
My Micromax A106 Unite 2 is dead After Flashing not power on plzzz help me :crying:
santoshk155 said:
My Micromax A106 Unite 2 is dead After Flashing not power on plzzz help me :crying:
Click to expand...
Click to collapse
Explain in brief what have u done that leads to the problem (dead of phone)?
Flashed what?
Flashed using sp tool or some app?
Explain your problem in deep so that i or anyone else can help
Don't worry no mobile can be permanently dead, we just have to flash the stock ROM of the respective mobile:fingers-crossed::good: