first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Bluehacks said:
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Click to expand...
Click to collapse
let me try this
sorry i dont know where to post...
people will post me this link
(GUIDE): "Hard Bricking" & "Resurrecting" the A110 made easy-
but i wanna different method
No you did not brick
nilesh.wankhede said:
first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
Click to expand...
Click to collapse
The same has happened to me, and I was also thinking on your line and tried all possible solution as also explained by someone here but no use.
Then I took my battery and tried it charged from some outer source.. and to my good surprise I succeeded
Then I put it back to A110 and it is working.
What I could understand that if you are on custom rom they do not support the recharge once the battery goes off completely. Hit Thanks if it helped you
buddy i had the same problem earlier
do not worry
simple solution
just download stock ics v2 and flash it through sp flash tool
[checkout the guides in development section]
every thing will be fine then
i had tried this and i was successfull
so just try it.
shadowww...
it is not bricking.....
As i understand it was not a bricking issue. the rom in which u r dosent have the support to charge the battery when it is switched off. some rom builders have provided patches for the same. you can try downloading such patches and install it frm cwm. before doing all this put your battery in some other canvas phone running in stock rom and then charge it. once you are done with it u can just put the battery back in ur device and switch it on.
No need to worry about anything, this kind of bricking once in a day always happen to me when i don't charge my phone on time , just connect ur charger wait a minute then press and hold the power button and tap menu button simultaneously, within 20-25 secs ur phone will boot, if it doesn't then disconnect the charger connect it again and again follow the whole procedure, i am sure ur fone will boot. Please let me know if it worked, n then hit the thanks button
Sent from my Micromax A110 using xda app-developers app
Please any moderator can move this thread and the other off topic threads posted in development section to their respected forums....
The development section has really got so many unsuitable threads...
Thanks.....
here is simple solution.. .. remove battery. charge it with universal charger.. ..for. 10-15 minutes.. .now keep battery in phone.. .and click power button.. .it will definitely charge
I dont know what to do! :'( Please Help
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Safely Installing a ROM and Help with bricked device.
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
- Easy, you only need flash stock ics through SP Flash Tool and it'll work again
Just flash it again it might work.
Press thanks if i helped
Sent from my Micromax A116 using xda premium
Phone dead
Sonu44589 said:
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
Click to expand...
Click to collapse
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Ak****banta said:
....moderator can move this thread .....
Click to expand...
Click to collapse
+1. and op has not responded to 'help posts' or even clicked 'thanks'.....
dont panic
krthkrao said:
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Click to expand...
Click to collapse
i had this prob too,wen i dried it up intentionally while trying to calibrate my battery...
our mobile cannot charge the battery when it is entirely dried up , so take ur battery to the local mobile repair shop and ask for a "Battery Boost" thy will charge ur battery it with some specific device , this is usually done for the mobile batteries which were not used for long time to get it running again..
btw did u try booting your phone with another battery! ??
Read my guide on canvas2 recovery
dileepworld.blogspot.in
Sent from my Micromax A110 using xda app-developers app
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
Here Is Tutorial Speacially for you :- https://www.youtube.com/watch?v=u2lqUXJi9vQ
Watch it.
Hope I helped
Hit :good:
Hello! I have a Micromax A110 which is not working now. If you try to switch it on it doesn't passes from the Superphone Canvas 2 screen. I asked my few expert friends about it and got to know that the os is not operating. The service centre people are lazy, they said it would take a month to fix the phone and also 1000 rupees as charges. I went to a local phone repairer and he took my phone and fixed it, but after working for a few hours the issue came back. Now I tried to search for reinstalling os on my phone but most results I got was about installing different ROMs which work when the phone is working. But my phone is not even switching itself on. Help me please and tell me how should I restore my phone to factory settings and format it again.
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Please register an account on XDA to have full access on site.
Stand by
Good luck
hi,
Suddenly out of the blue touch on the phone stopped working. No damage to the phone i mean it was working perfectly and just the other minute touch is non responsive.
Tired the restart tried to going to recovery mode but when i press power button to enter it doesnt respond i can scroll through all the options in recovery mode but cannot select anyone using the power button.
Power button works normally everywhere else. First question can it caused using a software update or something??? If yes how i roll it back as cant access the phone at all.
Secondly if it requires the touch replacement I can get it done from service centre. But I neeeeeeeed to have the backup of the phone especially the pictures and videos... How can i do that without having the access to anything on the phone.
is there a software or something which I can install on my pc and it can detect the device and take the backup of it completly????
Any help here would be greatly appreciated?
Its a MMX 350 with the ROM it was provided with no changes has been made even the phone has not been ever rooted.
Hi there,
I'm sorry but I founded only this general threads about your device where you can post/ask but only after you register an account on XDA forum:
[ALL IN ONE]Micromax Canvas Knight A350 Aka Canvas 6
Good luck
Hi there am new to XDA but surely have browsed so many times , but never made account .. finally i have a account and i want real help, My problem is my sim management from micromax canvas hd a116i is greyd out and aint able to detect any sim.
Things i have done so far
Power off my phone , removed sim , re-inserted sim - still same
i also did factory reset - still same
none of above worked so i decided to flash original micromax canvas hd a116i stock rom using SPtools through my pc and everything went well because i have done that earlier as well so yeah result was same greyd out.
i have no clue what's happening here and it all started all of sudden and now there is no wifi connectivity as well all it says is WPS failed. Try again later , but bluetooth is working fine.
things i must specify it is a 3 year old phone so i guess it might have given up or something is it a time to change my phone or there is actually a fix for this ?
URGENT
I need urgent help so please reply fast thank you.
first i have an old micromax a111 which didnt had battery in it.so when i took it to the shop I got the battery but the android was not booting.at repair shop he installed a rom but it came with issues.
phone freezes when activating wifi
pressing the power button once freezes and restarts phone
phone does not shut down stuck at canvas logo
so i want to install another rom which works fine[please if you know about a rom best with a111 please tell me]
i dont know how to root.tried many menthods but none worked
cant install a custom recovery
i am dumb at mobiles so please can anybody give me a tutorial on my situation step by step
pls pls pls pls help me guys
sorry for my bad english