Hi,
I'm new to this forum and got a micromax a60 before a week, i rooted it and every thing was fine, after some time applications start to crash one by one, now i'm trying to hard reset my phone and guess what??
1. Power + Home (Not Working).
2. Settings > Privacy > Factory Reset (Not Working).
3. Referred Each And Every Forum And Videos (Not Working).
Need Urgent Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
NOTE: WHENEVER THE PHONE TRY TO GET INTO RECOVERY MODE IT HANG OR SWITCH OFF AGAIN.
dude same problem here.micromax is crap.
but i think unroot ur phone with universalandrot and then try.good luck.
otherwise take this phone to service center and hope they can help u.
sorry 2 reply so late buh i fixed my problem by installing the stock rom with common downloader, ask me if u need help
Sent from my Micromax A60 using XDA App
first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Bluehacks said:
I guess this is not correct section to post.
Listen plugin ur charger and long press your lock button for like 5 to 6 mins or more..just try, it should work.
Note : First put ur phone on charging mode via power cable
Click to expand...
Click to collapse
let me try this
sorry i dont know where to post...
people will post me this link
(GUIDE): "Hard Bricking" & "Resurrecting" the A110 made easy-
but i wanna different method
No you did not brick
nilesh.wankhede said:
first bricked canvas 2 is in my hand
i am on suvi 7 rom..
battery is dry complet fully dry below 1%
i didnt charge or didnt even not put on charging when its dry..
now mobile is off
i charging
mobile continue-sly on charging since from last night now..
its not working even not boot up
no recovery entry....
so here is question is it really bricked how to wake up it..
plz help me
thnxxx in advance
Click to expand...
Click to collapse
The same has happened to me, and I was also thinking on your line and tried all possible solution as also explained by someone here but no use.
Then I took my battery and tried it charged from some outer source.. and to my good surprise I succeeded
Then I put it back to A110 and it is working.
What I could understand that if you are on custom rom they do not support the recharge once the battery goes off completely. Hit Thanks if it helped you
buddy i had the same problem earlier
do not worry
simple solution
just download stock ics v2 and flash it through sp flash tool
[checkout the guides in development section]
every thing will be fine then
i had tried this and i was successfull
so just try it.
shadowww...
it is not bricking.....
As i understand it was not a bricking issue. the rom in which u r dosent have the support to charge the battery when it is switched off. some rom builders have provided patches for the same. you can try downloading such patches and install it frm cwm. before doing all this put your battery in some other canvas phone running in stock rom and then charge it. once you are done with it u can just put the battery back in ur device and switch it on.
No need to worry about anything, this kind of bricking once in a day always happen to me when i don't charge my phone on time , just connect ur charger wait a minute then press and hold the power button and tap menu button simultaneously, within 20-25 secs ur phone will boot, if it doesn't then disconnect the charger connect it again and again follow the whole procedure, i am sure ur fone will boot. Please let me know if it worked, n then hit the thanks button
Sent from my Micromax A110 using xda app-developers app
Please any moderator can move this thread and the other off topic threads posted in development section to their respected forums....
The development section has really got so many unsuitable threads...
Thanks.....
here is simple solution.. .. remove battery. charge it with universal charger.. ..for. 10-15 minutes.. .now keep battery in phone.. .and click power button.. .it will definitely charge
I dont know what to do! :'( Please Help
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Safely Installing a ROM and Help with bricked device.
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
- Easy, you only need flash stock ics through SP Flash Tool and it'll work again
Just flash it again it might work.
Press thanks if i helped
Sent from my Micromax A116 using xda premium
Phone dead
Sonu44589 said:
I recommend you use CWM instead of SP Tools. Its a lot better and have almost 0% chances of any errors except if the zip file is corrupted or phone is switched off.
And about switching it on, I think you bricked your phone. Just go to the service centre and say that you were installing a game and a program started automatically asking you to switch off. You switched off and now its not opening. And most important thing "BE A NOOB TO THEM". Don't talk like some tech. genius. This is one of the working ways. They will repair it to the best of their knowledge, and if its not repaired, you'll get a replacement. Just remove all custom ROM related files from SD card and CWM too. Remove it from SD Card.
I did it several times when many of my friends bricked their MMX A110 installing a ROM or playing with system directory.
:good:
Click to expand...
Click to collapse
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Ak****banta said:
....moderator can move this thread .....
Click to expand...
Click to collapse
+1. and op has not responded to 'help posts' or even clicked 'thanks'.....
dont panic
krthkrao said:
Bro i gave my phone has suffered from same problem. i gave to mmx care but now they r returning it without repairing. problem is i have misplaced my bill now n i cant go back to them asking them to replace the phone. please help!!!
Click to expand...
Click to collapse
i had this prob too,wen i dried it up intentionally while trying to calibrate my battery...
our mobile cannot charge the battery when it is entirely dried up , so take ur battery to the local mobile repair shop and ask for a "Battery Boost" thy will charge ur battery it with some specific device , this is usually done for the mobile batteries which were not used for long time to get it running again..
btw did u try booting your phone with another battery! ??
Read my guide on canvas2 recovery
dileepworld.blogspot.in
Sent from my Micromax A110 using xda app-developers app
rohanmitra said:
Today I tried to update my a110 to jelly bean(V3),shile updating it with sp tools,it showed an error and the process stopped,I disconnected the phone,and it is not switching on nor charging from that moment!
Please Help!
Click to expand...
Click to collapse
Here Is Tutorial Speacially for you :- https://www.youtube.com/watch?v=u2lqUXJi9vQ
Watch it.
Hope I helped
Hit :good:
Hi frnds and experts...i hav a micromax funbook talk p362 tablet.My cousin had drawn the unlock patterns many times and it got locked, now the tablet asks to enter the email and pasword. I did that but nothing happened so i went to mobile shop and he hard reset the tablet and loaded the software again . But when he switched on the tablet its touch is not working..he says that an additional driver is missing .. How could i get that ... Plz experts help me....i shall be thankful to u all
Hello,
After a quick google, i found another thread on a forum where someone linked to a firmware. Apparantly after you flash it, it should work again.
ON the download link, one person says it worked another it doesn't. IF you don't mind flashing, i'll send you the link.
BTW. your tab doesn't work and you just take it back from the vendor if you still have warranty? You should have asked for another one, since you didn't unlock bootloader nor did you root.
Thanks
Jellybsly said:
Hello,
After a quick google, i found another thread on a forum where someone linked to a firmware. Apparantly after you flash it, it should work again.
ON the download link, one person says it worked another it doesn't. IF you don't mind flashing, i'll send you the link.
BTW. your tab doesn't work and you just take it back from the vendor if you still have warranty? You should have asked for another one, since you didn't unlock bootloader nor did you root.
Click to expand...
Click to collapse
thanks frnd bt can u tell me how can i download the driver from micromax official website... Because he was downloading it from the website.
Is it not posible to do without flashing
Is it not possible to make touch working without flashing my tablet. Can i get a password for micromax ftp servers
Rcy210 said:
Hi frnds and experts...i hav a micromax funbook talk p362 tablet.My cousin had drawn the unlock patterns many times and it got locked, now the tablet asks to enter the email and pasword. I did that but nothing happened so i went to mobile shop and he hard reset the tablet and loaded the software again . But when he switched on the tablet its touch is not working..he says that an additional driver is missing .. How could i get that ... Plz experts help me....i shall be thankful to u all
Click to expand...
Click to collapse
That person has flashed wrong firmware on your device...
Try this http://www.4shared.com/rar/j57Q3MJ6/Micromax_P362.html
Flash this ..
And then it will work.. properly :good:
BTW I also have he same tab and had this problem some months ago..
cant flash
i tried to flash by using tis tool but device is not conecting to updaTE FIRMWARE.my funbook p362 is not startingup.when switch on my tab it displays mmmx logo then goes black screen.after tat when i press unlock button it displays homescreen for a second and once again becomes black
hi guys,
i have this phone Micromax Canvas 2+ A110q, and i can't switch it on anymore. Well the problem started when i manually changed the time (turning off the network time) and after a while an Error flashed (Ui is not responding or something), though i could use it but the error kept appearing every 3-5 seconds, it kinda pissed me off so i switched it off and can't switch it on eversince. So Please if there is anyone who can help...please let me know
I am requesting to have this thread moved to the right forum.
Solution to your problem
XDA Visitor said:
hi guys,
i have this phone Micromax Canvas 2+ A110q, and i can't switch it on anymore. Well the problem started when i manually changed the time (turning off the network time) and after a while an Error flashed (Ui is not responding or something), though i could use it but the error kept appearing every 3-5 seconds, it kinda pissed me off so i switched it off and can't switch it on eversince. So Please if there is anyone who can help...please let me know
Click to expand...
Click to collapse
Dude try going to the Recovery Mode of the A110Q or flash the stock rom through SP Tools. If you cannot do that or Phone does not boot up ,please take ur phone to the Micromax Service Centre and get its repaired.
Thanks.
Hi there am new to XDA but surely have browsed so many times , but never made account .. finally i have a account and i want real help, My problem is my sim management from micromax canvas hd a116i is greyd out and aint able to detect any sim.
Things i have done so far
Power off my phone , removed sim , re-inserted sim - still same
i also did factory reset - still same
none of above worked so i decided to flash original micromax canvas hd a116i stock rom using SPtools through my pc and everything went well because i have done that earlier as well so yeah result was same greyd out.
i have no clue what's happening here and it all started all of sudden and now there is no wifi connectivity as well all it says is WPS failed. Try again later , but bluetooth is working fine.
things i must specify it is a 3 year old phone so i guess it might have given up or something is it a time to change my phone or there is actually a fix for this ?
URGENT
I need urgent help so please reply fast thank you.