Network Setup
2 Access points connected
first access point uses WPA2 AES
second uses WPA TKIP
Devices connects to second no problem
On 5.1 Lolipop, device refuses to connect to the first access point, drops connection every few seconds.
On 4.4.4 Kitkat, both access points fuction flawlessly
Seen work around to flash kitkat and OTA all the way to 5.1, done so, but still refuses to connect to AES network and i cant change the first access point to use TKIP.
Any ideas to fix AES wifi connections?
Related
When I try to connect to one particular WiFi network that has WPA2 encryption with AES key, with 802.1x access control using PEAP, my S710 hangs. I then have to restart the phone by removing the battery.
I don't have any problems connecting to :
- a WPA-PSK with AES key
- WEP, with 802.1x access control and PEAP
I've tried everything I can think of but I've not found a solution yet. Can someone help?
Thanks.
bump, having the same exact problem here.
Nobody seems to have a solution. I think I'll just have to contact the after-sales service and be without a phone for a while. Sucks!
My VOX has stopped communicating to my router. This appears to have happened since I accidently deleted profile but that could be co-incidence..
It sees my network...
Settings VOX
Net type INTERNET
Auth WPA 2
AES
USE IEEE 802.1x YES
AEP type: Smart Card or certificate
Settings WAG200G nothing really relevent here except to say AES as above.
My phone seems to connect WITHOUT encryption but when I add encryption (with real simple password) this is where the phone can't connect for some reason... My laptop is still connected to the router without any problems there is no MAC filter or anything like that.
Anyone please help!
BTW tried hard reset not helped.
i have the exactly same problem. i tried other kinds of config on my router but nothing worked.without encripton or password it connects...
Not connecting to WIFI
Seems more people have this problem?
WPA2 does seem to be a problem. Personally I also use fixed IP, but never got my phone connected to my home network.
@work I use WEP and DHCP, no problem connecting.
@home I use, as mentioned, WPA2, AES, Fixed IP, router.
If anybody got a simple answer...?
btw, I got this problem after using other roms(for almost a year now). Basic HTC rom (WM 6.0 :-( ) seems to work fine.
Half connected in fact
Hi, I'm also getting a wifi problem after installing the RUU_Vox_HTC_FRA_1.34.406.1_4.1.13.54_03.10.90_Ship ROM (and thus resetting everything in the profile), but I wonder if it's really the same thing.
My phone connects to the wifi, gets an IP (both the phone and the router show the same IP attributed), but PIE and Outlook Pocket can not use the network. It's just like they couldn't see the network. But they don't use Edge either to connect, so they probably somehow try to send data to the network,but they fail.
Oh, and WEP encryption changes nothing. And I can't test with fully removing the encryption, as I use an internet box, not a standard router.
What I don't get is that I was browsing just fine on this ROM and the same config in my router I wish someone with more knowledge would spare a minute to help us out here or at least point us in the right direction
Solved
I upgraded the firmware on my router... :d thx
Has anyone ever been able to connect to AES encrypted n-wifi networks? The only way I get my phone to connect is using TKIP (and thus, no n-wifi)
Hi guys,
Since the JB update I'm having massive problems with WPA2 wifi on both my TF101 and Desire. Wifi scans and finds the network, realises it is WPA2 encrypted and asks for the password, accepts the passwords and tries to connect however it is always unable and says something along the lines of 'saved, secured with wpa....'
Is there any solution because with a WIFI only tablet it limits what I can use it for lol
Thanks
Hi!
Every JB / CM10 ROM I have tested changes my TF MAC. The result, if you have MAC filtering enabled on your TF, is the same you are talking about: you detect your net, your password is ok, but your router won't give you an IP address as your MAC is not in the 'allowed list'.
Maybe you can check that to see if that's the problem.:good:
So, after browsing a bit about this I'm still unable to connect to my work wifi network. Every other network I'm able to connect just fine.
I put the wifi password, authenticates, goes to "obtaining ip address", goes back to authenticate.. and doesn't connect.
Forcing (using manual IP configuration) connects but doesn't open websites, even tho I'm using the connect gateway / dns servers. (even used 1st dns same as gateway).
Got a LG 4x next to me connecting just fine, problem is only on my nexus 5.
So far happens on 4.4.2 and 4.4.3.
Tried some tips that I saw around the web like disabing nfc or turning on and off airplane mode (although there isn't much logic in these), but still nothing.
Wifi password is correct.
Problem it seems is somewhere obtaining the ip from the router or something, as it goes back when it reaches this point, but then again forcing it allows me to connect but doesn't open websites.
Any tips? I'm suing WPA2 PSK at home and it's fine.
The network is in a 2ghz range channel 10.
Any help is appreciated.
PS - Router is a linksys WAP54G.
Thanks a lot!