Hello, another question in quick succession.
I have used the installer featured in this topic: http://forum.xda-developers.com/showthread.php?t=2588979 - to install all the necessary drivers so I can connect my phone through USB and hopefully install Android 5.1 onto my phone.
I went through every step in the topic and ADB Composite Device appear listed. My phone is also definitely connected as I check for 'adb devices' in command prompt. However, when connected in fastboot mode, it still asks to Connect to USB Device. USB Debugging has been enable on my device, also.
Help would be much appreciated! I'm new to this so it's a teensy bit of a rigmarole.
Could really do with help here, I'm stalling on it and it's bugging me - wanna get it sorted.
Related
Alright, here goes my first post. I have lingered in these forums for awhile, and have always found what I needed. This is the first time my searching on here, as well as google, has let me down.
To clarify, if I connect to my computer and have USB Mass Storage on, I can see it, move files to it and everything. My problem is, I am using my old phone (P500) to learn and practice ADB (I own a GNEX), and would like to install CWM via ADB, but I need to move files to the root of my sd.. but my phone won't show up if it's in debugging mode!
I have the drivers installed, and used a toolkit to root (worked fine, no errors). Am I missing something here or is there another issue?
Info:
Windows 7 64bit
Telus Mobility (Canada)
Model: LG-P500h
Android 2.3.3 (stock)
stock kernel
MissBizz said:
Alright, here goes my first post. I have lingered in these forums for awhile, and have always found what I needed. This is the first time my searching on here, as well as google, has let me down.
To clarify, if I connect to my computer and have USB Mass Storage on, I can see it, move files to it and everything. My problem is, I am using my old phone (P500) to learn and practice ADB (I own a GNEX), and would like to install CWM via ADB, but I need to move files to the root of my sd.. but my phone won't show up if it's in debugging mode!
I have the drivers installed, and used a toolkit to root (worked fine, no errors). Am I missing something here or is there another issue?
Info:
Windows 7 64bit
Telus Mobility (Canada)
Model: LG-P500h
Android 2.3.3 (stock)
stock kernel
Click to expand...
Click to collapse
Since the device is not getting detected with USB Debugging enabled it's safe to assume a bad driver installation. To verify tho, enable USB Debugging on the device and connect it to your PC. Go to Device Manager. Somewhere towards the top, assuming the drivers were installed will be a device "ADB Interface" with a subitem "Android Platform Sooner Single ADB Interface" or something similiar. If the "ADB Interface" item isn't there then the drivers weren't installed correctly. Uninstall them. Reboot computer. Rerun driver installation program. When it finished, reboot your PC. Power off the device. Connect it to your PC. Power on the device and let all drivers install. You should be good to go from here.
If you'd like a good known set of LGE USB drivers, download Android Flash Recovery, link is in my signature. Hope this helps.
EDIT:
Oh, and Welcome to XDA
Hello there,
I'm running CM11 20141223 NIGHTLY on my XT1033, and everything is working fine so far, with the exeception of USB communication. I develop my stuff on my desktop, which is running W7. Consider the following scenarios:
1) If I plug it in MTP mode (debugging deactivated), it won't find. Windows tries to install a USB Composite Device driver and fails.
2) If I plug it in PTP mode (debugging still deactivated), Windows installs a Moto G driver and access the DCIM camera folder normally (that's what I've been using to "push" files into it, and then move it with file manager with temp su access).
3) In both MTP and PTP mode, but with debugging activated, Windows detects it as a USB Composite Device. On Device Manager it shows up with the yellow triangle warning icon, but I can't seem to update it (tried with the extra Android drivers that comes with ADT).
4) Neither adb nor fastboot can detect the device. Which is weird because on my notebook, running windows 8.1, I got the same situation but adb (only, fastboot still can't) can detect it.
5) I also installed Koush universal ADB Drivers on both machines.
Does anyone have some insight on the matter? Should I get rid of Koush?
I don't intend on upgrading to CM12 anytime soon. In fact, I did it some weeks ago, but I'm more confortable with CM11 so I rolled back to it.
Hoping it's okay to bump my thread after a month.
Does anyone know what to do in this situation?
Thanks!
jorge_quintanilha said:
Hello there,
I'm running CM11 20141223 NIGHTLY on my XT1033, and everything is working fine so far, with the exeception of USB communication. I develop my stuff on my desktop, which is running W7. Consider the following scenarios:
1) If I plug it in MTP mode (debugging deactivated), it won't find. Windows tries to install a USB Composite Device driver and fails.
2) If I plug it in PTP mode (debugging still deactivated), Windows installs a Moto G driver and access the DCIM camera folder normally (that's what I've been using to "push" files into it, and then move it with file manager with temp su access).
3) In both MTP and PTP mode, but with debugging activated, Windows detects it as a USB Composite Device. On Device Manager it shows up with the yellow triangle warning icon, but I can't seem to update it (tried with the extra Android drivers that comes with ADT).
4) Neither adb nor fastboot can detect the device. Which is weird because on my notebook, running windows 8.1, I got the same situation but adb (only, fastboot still can't) can detect it.
5) I also installed Koush universal ADB Drivers on both machines.
Does anyone have some insight on the matter? Should I get rid of Koush?
I don't intend on upgrading to CM12 anytime soon. In fact, I did it some weeks ago, but I'm more confortable with CM11 so I rolled back to it.
Click to expand...
Click to collapse
Have you tried Motorola's drivers? It installs separate drivers for adb, fastboot, mtp. https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/97326/p/30,6720,9050
Do You Like To Flash Custom Stuffs On Your Android phone? Or Are You A Developer? But You Can't Able To Do It Because You're Facing Some Problems with Your Adb & fastboot. All Of This Problems Are Only Because Of One Thing And That is Drivers.
And If you agree With Anyone Of This Situations Then You're At The Right Place Because Today I Am Going To Tell You That How You Can Install The Adb Drivers For Your Specific Android Phone On Your Pc.
Adb drivers are necessary if you want to flash a android device through Fastboot mode or if you're a android developer. Usually Our PC installs the adb drivers automatically for the specific android device but sometimes it can't so you have to install it manually.
This will also help you to solve adb errors like Device is offline, USB debugging Authorize pop-up not showing in android And etc adb errors. Make sure that your USB debugging option in developer mode is enabled on your Android device Because without this you can't use adb.
Steps:-
*So first go http://adbdriver.com to and download the "adb driver installer (Universal)". Then extract it.
*Now connect your Android phone to your PC using USB cable. Then Open the application.
*Now you will see something like Adb interface drive and with a red Cross at left side. Make sure to refresh if driver option is not shown.
*Now Just Click On install To install your device adb drivers. Then it will Install the adb drivers for your specific android phone in just under 2 minutes.
*Then Allow The USB debugging On your Android phone. Then the adb drivers will get successfully installed.
*If still adb can't recognize your device then try to connect your phone in PTP Mode instead of MTP or Charging only modes.
*If still it doesn't work for you then Revoke USB debugging Authorizations in developer mode. So that's how you can install the adb drivers for your Android Phone.
Video Tutorial - https://goo.gl/a6QgtH
As the title says.
I'm trying to unlock the bootloader on my XZs so I can root it.
My device is listed normally when turned on w/ the command window, but in fastboot mode it disappears and when I try a command, an error comes up saying ""error: no device/emulator found". (see attached image)
As far as I'm concerned, I have all the necessary drivers, I've tried on another PC, the result is always the same.
And when I try to change the drivers (Via Device Manager>Update Driver>Browse My Computer...>Let me pick...>Have Disk...)
I get yet another error saying "The folder you specified doesn't contain a compatible software driver for your device..."
Can someone please give me a solution. This has been asked before on XDA by someone else (that thread has no replies). It seems it's always us little guys with actual problems which need solving who get little to no help at all here.
Reinstall driver again.
It doesn't work. The problem is I want to install the Google USB drivers for my Xperia phone but Windows 10 will not let me and driver signing seems to be impossible to disable (currently typing this on my laptop while it's in test mode).
1. Turn off your phone. Boot in to fastboot mode and plug the cable. After your heard the sound from the computer for new device found. Go to device manager look to usb S1 device. Reinstall driver by manual choose (do not search) from the menu with the name is Android Google. When prompt for install. Choose install anyway. After successful install driver, please check status from flashtool to make sure your device show connected in fastboot.
2. Change the usb port. Sometimes you get problem with usb port 2.0 and 3.0
Hope you can fix it asap.
Nothing by the name of 'Android Google' appears in the menu when selecting new drivers.
I clicked on 'S1boot Fastboot' under 'other devices' in Device Manager and clicked on update driver
>Browse Computer
>Let me pick
- and then there's something similar called 'Android Device' but no 'Android Google' so I click on that
- then I get three options:
Android ADB Interface Version 11.0.0.0
Android Bootloader Interface Version 11.0.0.0
Android Composite ADB Interface Version 11.0.0.0
None of them worked when I tried.
I think the solution is to have the phone on, with USB debugging enabled, connect via USB to PC, test your adb devices again, if all good, go ahead and
Rich (BB code):
adb reboot fastboot
This is because some phones use Fastbootd (notice the d..).
Hi,
I'm having some issues connecting my tab s7 FE through ADB. Everything is setup correctly on the computer's side of things my xiaomi phones shows up when running "adb devices" in cmd.
I've enabled developer mode and turned on usb debugging.
I don't get a prompt to "trust computer".
I tried to revoke previous authorizations and disabling adb timeout.
Somehow usb debugging isn't displayed in the status bar, is that a thing in android 12?
Is there some weird extra step to enabling usb debugging on this device?
Surely I'm missing something obvious here, but the problem seems to be device specific and finding an answer with such a broad topic narrowed to a specific device is proving to be difficult.
Any help would be greatly appreciated.
EDIT: SOLUTION
Samsung needs a specific driver for usb debugging, you can get it here:
https://developer.samsung.com/android-usb-driver
Guess I didn't do proper research, hopefully this can help someone else.