Hello there,
I'm running CM11 20141223 NIGHTLY on my XT1033, and everything is working fine so far, with the exeception of USB communication. I develop my stuff on my desktop, which is running W7. Consider the following scenarios:
1) If I plug it in MTP mode (debugging deactivated), it won't find. Windows tries to install a USB Composite Device driver and fails.
2) If I plug it in PTP mode (debugging still deactivated), Windows installs a Moto G driver and access the DCIM camera folder normally (that's what I've been using to "push" files into it, and then move it with file manager with temp su access).
3) In both MTP and PTP mode, but with debugging activated, Windows detects it as a USB Composite Device. On Device Manager it shows up with the yellow triangle warning icon, but I can't seem to update it (tried with the extra Android drivers that comes with ADT).
4) Neither adb nor fastboot can detect the device. Which is weird because on my notebook, running windows 8.1, I got the same situation but adb (only, fastboot still can't) can detect it.
5) I also installed Koush universal ADB Drivers on both machines.
Does anyone have some insight on the matter? Should I get rid of Koush?
I don't intend on upgrading to CM12 anytime soon. In fact, I did it some weeks ago, but I'm more confortable with CM11 so I rolled back to it.
Hoping it's okay to bump my thread after a month.
Does anyone know what to do in this situation?
Thanks!
jorge_quintanilha said:
Hello there,
I'm running CM11 20141223 NIGHTLY on my XT1033, and everything is working fine so far, with the exeception of USB communication. I develop my stuff on my desktop, which is running W7. Consider the following scenarios:
1) If I plug it in MTP mode (debugging deactivated), it won't find. Windows tries to install a USB Composite Device driver and fails.
2) If I plug it in PTP mode (debugging still deactivated), Windows installs a Moto G driver and access the DCIM camera folder normally (that's what I've been using to "push" files into it, and then move it with file manager with temp su access).
3) In both MTP and PTP mode, but with debugging activated, Windows detects it as a USB Composite Device. On Device Manager it shows up with the yellow triangle warning icon, but I can't seem to update it (tried with the extra Android drivers that comes with ADT).
4) Neither adb nor fastboot can detect the device. Which is weird because on my notebook, running windows 8.1, I got the same situation but adb (only, fastboot still can't) can detect it.
5) I also installed Koush universal ADB Drivers on both machines.
Does anyone have some insight on the matter? Should I get rid of Koush?
I don't intend on upgrading to CM12 anytime soon. In fact, I did it some weeks ago, but I'm more confortable with CM11 so I rolled back to it.
Click to expand...
Click to collapse
Have you tried Motorola's drivers? It installs separate drivers for adb, fastboot, mtp. https://motorola-global-portal.custhelp.com/app/answers/prod_detail/a_id/97326/p/30,6720,9050
Related
I figured it out!
I'm having trouble getting my computer to recognize my phone as an ADB device. I have an HTC EVO, running cyanogen 6.1. I've downloaded the android SDK, as well as several of the SDK components (Google-usb-driver, platform-tools, and several APIs).
When I plug in my phone, my computer would not recognize it as an ADB device, so i removed the drivers from my computer and tried again. I attempted to manually install the drivers from the file (C:\android-sdk-windows\google-usb_driver) with no luck. I tried going into the amd64 file (I'm running windows 7, 64bit), but my computer would not recognize the drivers.
I'm new to all of this (this is my first post)- any and all help would be greatly appreciated
I am having the same problem with a HTC Hero (Sprint) tried everything but i can't get my pc to regocnize the adb driver
same thing with stratosphere.
I have the same problem with an unrooted samsung stratosphere. I need to install the adb drivers to use the smartdog remote web desktop through usb. The samsung usb drivers are already installed so it won't let me install the adb drivers. What can I do?
Funny I thought I was having problems with ADB cuz I'm on a Mac but it appears you Windows catz are SOL too...WTF is up with ADB not recognizing devices? Somebody should have a fix or some info on this, so frustrating, I just wanna root my damn devices!
had the same issue. here what I did and it worked:
- go to junefabric dot com
- download and install PDANet( 'cause it got adb usb driver in it)
- uninstall PDANet( if you have no use of it. don't worry, adb usb driver doesn't uninstall)
Alright, here goes my first post. I have lingered in these forums for awhile, and have always found what I needed. This is the first time my searching on here, as well as google, has let me down.
To clarify, if I connect to my computer and have USB Mass Storage on, I can see it, move files to it and everything. My problem is, I am using my old phone (P500) to learn and practice ADB (I own a GNEX), and would like to install CWM via ADB, but I need to move files to the root of my sd.. but my phone won't show up if it's in debugging mode!
I have the drivers installed, and used a toolkit to root (worked fine, no errors). Am I missing something here or is there another issue?
Info:
Windows 7 64bit
Telus Mobility (Canada)
Model: LG-P500h
Android 2.3.3 (stock)
stock kernel
MissBizz said:
Alright, here goes my first post. I have lingered in these forums for awhile, and have always found what I needed. This is the first time my searching on here, as well as google, has let me down.
To clarify, if I connect to my computer and have USB Mass Storage on, I can see it, move files to it and everything. My problem is, I am using my old phone (P500) to learn and practice ADB (I own a GNEX), and would like to install CWM via ADB, but I need to move files to the root of my sd.. but my phone won't show up if it's in debugging mode!
I have the drivers installed, and used a toolkit to root (worked fine, no errors). Am I missing something here or is there another issue?
Info:
Windows 7 64bit
Telus Mobility (Canada)
Model: LG-P500h
Android 2.3.3 (stock)
stock kernel
Click to expand...
Click to collapse
Since the device is not getting detected with USB Debugging enabled it's safe to assume a bad driver installation. To verify tho, enable USB Debugging on the device and connect it to your PC. Go to Device Manager. Somewhere towards the top, assuming the drivers were installed will be a device "ADB Interface" with a subitem "Android Platform Sooner Single ADB Interface" or something similiar. If the "ADB Interface" item isn't there then the drivers weren't installed correctly. Uninstall them. Reboot computer. Rerun driver installation program. When it finished, reboot your PC. Power off the device. Connect it to your PC. Power on the device and let all drivers install. You should be good to go from here.
If you'd like a good known set of LGE USB drivers, download Android Flash Recovery, link is in my signature. Hope this helps.
EDIT:
Oh, and Welcome to XDA
Hi All,
I have a One plus one & using Windows 7 64bit
Since the last few days i have lost USB Transfer between my device and windows and cant transfer anything.
I enabled PTP and checked ADB is working showing my device in the command prompt and fast boot is also detecting my device on the command prompt.
But whenever i enable MTP to transfer files between my PC & Device, it detects my device as MTP USB Device but is unable to install any driver and i get the prompt as Driver installation failed.
Could someone please advise a workaround.
PS: Running stock rooted 44S
Thanks
I would try to uninstall drivers on win7, then connect OPO to pc and see what happens.
You can uninstall drivers on device manager in win7.
Kurtsi said:
I would try to uninstall drivers on win7, then connect OPO to pc and see what happens.
You can uninstall drivers on device manager in win7.
Click to expand...
Click to collapse
Have done that multiple times, and again installed ADB & Fastboot Drivers which are working fine, but MTP is not working and Windows fails do install MTP drivers, thus i am unable to access the USB storage
Have you tried with another pc?
Phone model H955, Windows 10 x64, following drivers installed: LGUnitedMobileDriver_S51MAN313AP22_ML_WHQL_Ver_3.13.2 (which installed LGE Mobile USB Modem AFAIK)
In download mode phone is recognized as LGE Android MTP Device and there is no adb interface in control panel, also it doesnt install the device and it says CODE 10 (This device cannot start).
When i connect the phone when it's booted (normal mode), it correctly shows my phone's name and adb interface (with usb debugging enabled).
Any idea what is wrong? (and yes im connecting using USB2 port, using original usb cable)
Im about to give up, this is beyond stupid.
Let me add screenshot to show how it looks like, maybe it's supposed to be like this. (?)
same problem here, any fix, only flash tool works even installed the drivers 4.0.4 to test and the same result error code 10 but if the phone is on the,driver works fine the, usb debug is always on
link for 4.0.4 driver
http://www.mylgphones.com/lg-android-usb-device-drivers
This may be a bit late but did you manage to fix it?
Same issue on my H950 G Flex 2. Been searching for weeks for a driver that works in Download mode.
I am actually following the steps from the pwnieexpress guide to build my own pwn phone, in an attempt to build my own pwn phone. With no malicious intent, I'm trying to build up my pentest skills on the go.
I'm currently on Windows 7 using the android sdk. Fastboot devices manage to return my device but on step 13, my adb devices shows blank in the list of devices.
When I plugged in my wiped out nexus 5, device manager shows the Google nexus adb driver, but I cannot seem to get the adb devices to show my device.
I tried restarting the adb server and reconnecting my device to multiple USB ports but doesn't seem to work.
Any ideas? I've yet to try on a different machine, but could it be a problem with the ports?
Looking forward for any help available.
Don't slam me for asking the obvious, but do you have USB debugging ticked on in the os settings? You may have to go through an update of the android composite adb interface drivers via device manager. Just choose to browse computer, pick from a list, then run the update on each item listed. This doesn't install anything new but does seem to reset drivers. Beyond that, can't help.
Sent from my Nexus 9 using Tapatalk
Fixed. Seem to be a problem with the usb drives on my home PC, it failed to detect the device during adb devices. Weird, as fastboot seemed to work out well.
I basically installed the drivers in another machine and adb devices and adb push .. /sdcard/ worked just fine.
Thanks!