I have a micromax a210 ~canvas 4.
The power button is not working now.I have switched off it and now i am helpless.
I have flashed the stock rom/firmwire sucessfully.
It even shows battery charging when connected to charger.
But cannot switch on it....
Any body know how to make it switch on without powerbutton?
Hi, thank you for using XDA Assist. You're going to have to get the power button fixed. Power won't flow to the device and there is no software fix.
jd1639 said:
Hi, thank you for using XDA Assist. You're going to have to get the power button fixed. Power won't flow to the device and there is no software fix.
Click to expand...
Click to collapse
Can u give me any hardware component buying online site?
Thanks
Probably the best place to ask is in your device specific thread, http://forum.xda-developers.com/canvas-4/help Someone there may have had to replace their power button and would know where to get one.
Thread closed.
Related
hi
i own a Z2 (d6503)
-bootloader unlocked (everything else is custom) i had rooted it previously but i think i lost the root access while updating the firmware to 4.4.4 using EMma
my problems
1. Google services are not working over wifi, but there is no problem with mobile data.
i have tried clear cache method already
2. Phone isn't turning on in recovery mode. neither manually (with buttons) nor with quickboot or PC
everywhere i found the same method: turn off, power on and wait for led to light up then press either of the volume buttons repeatedly. But the led doesnt light up
3. I have lost my DRM keys while unlocking the bootloader. (no TA backup). my bad.
what did i looose other than xreality engine? can it be recovered? how?
Please help
i am familiar with rooting and know a little more than an average user. But at the end of the day i am a noob too.
One more thing: for the new firmware is the rooting method the same?
Hi,
My best guess is you will need to reflash all stock software but I would suggest asking in the device specific q&a forum to get the best answer on what to do
http://forum.xda-developers.com/xperia-z2/help
Hope you get everything up and running again!
reply to demkantor
demkantor said:
Hi,
My best guess is you will need to reflash all stock software but I would suggest asking in the device specific q&a forum to get the best answer on what to do
http://forum.xda-developers.com/xperia-z2/help
Hope you get everything up and running again!
Click to expand...
Click to collapse
THanks
how do u suppose i should do that? using emma?
Hi,
Being I don't own your phone the best people to ask would be the ones who do. Post your question in the link above and you are bound to get the help you need
Best of luck!
okie thanks
demkantor said:
Hi,
Being I don't own your phone the best people to ask would be the ones who do. Post your question in the link above and you are bound to get the help you need
Best of luck!
Click to expand...
Click to collapse
Thread closed, thanks!
Hello, I recently tried to put a custom ROM on my tablet and managed to brick it so it does not turn on, doesn't get recognized by my computer - so basically a brick.
I am now looking for a way out of this mess and would be very happy if someone could help me.
Thanks in advance.
arunbiju969 said:
Is your tab showing samsug logo,plz specify the device status,can it bootinto recovery or fast boot.
Sent from my TW800 using XDA Free mobile app
Click to expand...
Click to collapse
The device will not turn on, will not indicate charging and will not even activate the screen.
holding down the power+vol up/down also does nothing..
Yes, Win 8.1 x64
for my computer, yes (and i would like to keep it that way). i also have a win 8 comp that i dont really care about
for my tablet, no i don't.
It might be effective but it will also be expensive i think, thankyou for your help and i wish you all the best.
Hi
Thanks for writing to us at XDA Assist. Unfortunately it sounds to me like you've properly hard bricked the tablet, there's really no way out of this other than replacing the motherboard usually. I'd suggest you contact your local repair centre and organise to have it inspected.
Good luck!
Thread closed, thanks.
I've been searching for a solution for almost one month but couldn't find one so far. While I've created a thread in Help & Troubleshooting section of the forum but no reply so far. Please Guide.
I rooted my AT&T Infuse 4G using framaroot v. 1.5.3, it was rooted well and worked fine. Then I installed an android app 3c Toolbox Pro and happened to apply preset settings in build control section of the application (build.prop). After then my Phone shows Samsung logo and when sound is played it doesn't show anything and crashes to reboot.
It's charging well, and also booting to Samsung Official Recovery.
Is there any way to recover the device while the USB port is damaged and I can't connect to pc. Please Help to recover....
Hi, thank you for using XDA Assist. To recover your phone you are going to need Odin. See if this will work for you http://forum.xda-developers.com/showthread.php?t=1607788
:'(
jd1639 said:
Hi, thank you for using XDA Assist. To recover your phone you are going to need Odin. See if this will work for you http://forum.xda-developers.com/showthread.php?t=1607788
Click to expand...
Click to collapse
Thanks for your reply. . . but the problem is this my phone doesn't starts when it goes beyond Samsung Logo just sound plays no display at all and after a few seconds it reboots and continues to repeat the same Samsung Logo -> sound without display -> Reboot
Thread closed.
Dear community! I would be very glad if you could give me any assistance at reviving my Elephone Trunk(Snapdragon 410).
Today, suddenly, as I was using it, it just blanked out. I was using CM12 with xposed, worked perfectly untill now. No way to turn it on, tried this tutorial(unfortunately just for MTK devices):
youtube. com/watch?v=A3TmXtOA0IA
Windows does`t find the phone, no matter what(tried pressing volume buttons and plugging in the usb cable...). I am stuck at the point, where I wanted to do the "wire trick", but I can`t find the GND(ground) contact point to try to bridge it with the right contact on the motherboard, which would then supposedly trigger the phone recognition in Windows.
Here is the photo of the motherboard:
tinypic.com /r/ou4ljb/9
Any ideas which two contact points I should try to bridge?
Any help greatly appreciated!
P.S. since I just registered, I am unfortunately not allowed to post the links properly...
gerzaundisch said:
Dear community! I would be very glad if you could give me any assistance at reviving my Elephone Trunk(Snapdragon 410).
Today, suddenly, as I was using it, it just blanked out. I was using CM12 with xposed, worked perfectly untill now. No way to turn it on, tried this tutorial(unfortunately just for MTK devices):
youtube. com/watch?v=A3TmXtOA0IA
Windows does`t find the phone, no matter what(tried pressing volume buttons and plugging in the usb cable...). I am stuck at the point, where I wanted to do the "wire trick", but I can`t find the GND(ground) contact point to try to bridge it with the right contact on the motherboard, which would then supposedly trigger the phone recognition in Windows.
Here is the photo of the motherboard:
tinypic.com /r/ou4ljb/9
Any ideas which two contact points I should try to bridge?
Any help greatly appreciated!
P.S. since I just registered, I am unfortunately not allowed to post the links properly...
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
Try posting your query in Elephone Trunk Thread or in Android Q&A,Help and Troubleshooting
___
v7
XDA Assist
Hello guys,
I need app/xposed addon to change/substitute functions of touch screen.
Touchscreen/digitizer in my mobile device is crushed [gently ], but repairing this device is more expensive than same device.
I've got root, i need to bind touch screen options to physical/nav keys.
I know, that can't be comfortable, but i need this device only for reading manga/watching anime.
So basic functions like swipe'ing right/left/top/bottom, tapping.
Ive got home button, vol +/-, menu button, power button.
Thank ya for help.
Insomaniac Smoku said:
Hello guys,
I need app/xposed addon to change/substitute functions of touch screen.
Touchscreen/digitizer in my mobile device is crushed [gently ], but repairing this device is more expensive than same device.
I've got root, i need to bind touch screen options to physical/nav keys.
I know, that can't be comfortable, but i need this device only for reading manga/watching anime.
So basic functions like swipe'ing right/left/top/bottom, tapping.
Ive got home button, vol +/-, menu button, power button.
Thank ya for help.
Click to expand...
Click to collapse
Hi Insomaniac
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we could better approach your request guiding you to the appropriate experts?
It seems to be a LG G2 Mini but I can't be sure.
I will be waiting for your reply within the next 2 days.
Nice regards.
.
Kdio said:
Hi Insomaniac
Thanks for using XDA Assist.
Could you please state the Manufacturer & Model of your device so we could better approach your request guiding you to the appropriate experts?
It seems to be a LG G2 Mini but I can't be sure.
I will be waiting for your reply within the next 2 days.
Nice regards.
.
Click to expand...
Click to collapse
Goclever Tab i71 :V.
Insomaniac Smoku said:
Goclever Tab i71 :V.
Click to expand...
Click to collapse
Hi Insomaniac
Thank you for your reply
As we do not have an specific forum dedicated for your device yet, our experts at the below forum should be able to help you. Please be welcome to post over in there. Collect all devices information you can and bundle it with your request.
Android Q&A, Help & Troubleshooting
Nice regards and good luck.
.