Related
My ROM upgrade freezes at 99%. Please tell me what im doing wrong.
mr.allawi said:
My ROM upgrade freezes at 99%. Please tell me what im doing wrong.
Click to expand...
Click to collapse
If it's a ROM you cooked yourself then it's too large to fit. Otherwise, not sure.
What ROM are you trying to flash?
update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.
I'm gonna say this just to cover all the bases..I'm not sure how long you are waiting but a standard flash can stay at 99% for a LONG time before finally finishing the flash...when they say the flash should take around 10 minutes they are not kidding so I hope you are not just getting impatient.
Merlin_reloaded said:
What ROM are you trying to flash?
Click to expand...
Click to collapse
I have tried all roms, they all have the same problem!
Just wait for it, it stays at 99% for 5 mins sometimes.
it says failed to complete then it shows some recovery.
raj_luvs_frnds said:
update it with the wizard love ROM and then use shell tool to get the OS u want from any ROM.
Click to expand...
Click to collapse
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?
mr.allawi said:
I have just done this now and after I finished the shelltool, I did a hard reset and it stayed on the flash screen of Wizard Love..
I am unsure on how to do a hard reset for the HTC Wizard. Anybody help me?
Click to expand...
Click to collapse
hold down the record button and comand button at the same time then reset using the stylus (while holding the buttons) then a black screen will appear asking you to press call button to hard reset
for more details you have to visit wiki
It sounds to me like you didnt do much reading before diving into this whole process. If you have a CID locked g4, you will never be able to flash a custom rom with ruu method untill unlocking it.
Should you use shelltool then you will need to wait untill it says it is finished(read all instructions before attempting. They will tell you everything you need to know) If shell tool never gives you the complete message then just let it sit for about half an hour to be safe and then just HARD RESET, NOT SOFT RESET by holding comm manager, voice button and using stylus to reset with the little pin hole.
If you read everythign there is to know about the process and all possibilities, then you will have no problem.
Just read read read... This website is like the rom flashers bible. Everything you need to know is all here. You just have to find it and read it.
just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
asaf_hermann said:
just upgraded my phone vesion from wm6.1 19199 touchflo to wm6.1 19209 touchflo yesterday.. and it worked well, until now, i am trying to turn on the phone but it stucks at " windows mobile 6.1 professional ".
i tried to turn it on a lot of times and to do soft reset and take the battery out but it is the same all the times. i also charge the battery but it is full and it still happens.
please! what can i do??
Click to expand...
Click to collapse
Hard reset
how??
i cant turn it on, it stucks at the beginning
asaf_hermann said:
how??
i cant turn it on, it stucks at the beginning
Click to expand...
Click to collapse
The wiki is your friend.
can you please tell me what to do?
asaf_hermann said:
can you please tell me what to do?
Click to expand...
Click to collapse
To perfomr a Hard Reset :-
In this scenario the common solution is to do a hard reset,to do the Hard reset.Press and hold the comm manager button and the voice command button,while keep the two buttons pressed,and at the same time,use the stylus to lightly press and hold the Reset button,the phone will reboot and ask for confirmation,accept it and phone will do a hard reset.check if it helps,otherwise,most probably,its a bad flash or the the extended_rom is corrupted.Reflash the official carrier's rom to clear/correct the extended_rom or reflash the TNT 19209 touchflo ,do this with getting into Bootloaders (Tricolor screen),hope it'll work.
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
ultimate solution is with me
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
naren3108 said:
if everything fails the i will request u to send ur set to me...by some chance when my set stuck the last time i had a friend in o2 service centre and he took my phone and flashed a new rom in 2 hrs. let me know if that suits u.....mail me at [email protected] and i will get it done for u
Click to expand...
Click to collapse
Be a sport,don't start posting the same request and offering your service to everybody and in every thread, requesting them to send their phones to you for repair,you know it yourself its not feasible and practical.If you have a genuine solution,why don't you start a new thread and post the procedure alongwith the software you claim you have to revive a phone in this manner,if you honestly intend to help and do a service to the community. According to your name and email ,I presume you are somewhere in India,do you think,its viable to send all the phones from all around the world to you for repair,NO kidding !!! I don't mean any offense towards you though !
asaf_hermann said:
the first solution dont work, in the second i press the reset button it resets and still have the problem.
the other solution i dont understand. my phone cannot connect activesync so i cant flash a new rom.. if thats what you tried to say
Click to expand...
Click to collapse
Activesync will not work in this situation,but if you are able to get into Bootloaders (tricolor screen) its possible to flash a rom,and you don't need to activesync to perform a flash,infact when you start a Rom to flash,it automatically cuts off the activesync all by itself even in the normal condition,so don't worry if the activesync doesn't work now,just try to get into Bootloaders mode and flash a rom.
how can i get into bootloaders mode?
asaf_hermann said:
how can i get into bootloaders mode?
Click to expand...
Click to collapse
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
if everything fails rememer me........but be fast and stop trying all hanky panky things on ur device it can damage it further........
zabardast_1 said:
Press and keep holding down Camera button and at the same time Soft reset or
Camera Button + Power on the phone,it'll take the phone into Bootloaders mode (tricolor screen).While in Bootloaders, Hook up the phone with pc via usb cable,watch small usb appear at the bottom of the Bootloaders and run the RUU,it'll start to flash the Rom,ok
Click to expand...
Click to collapse
yesss.. thanks!! it works!
the bootloader worked.. thank you very much! i really appreciate your work and time that you spend for me. thank you! you saved my phone.
Hi, i have been looking for answers on the forum, and i learn new things but not how to fix this or what is causing it.
I have buyed i997 from a reseller. He sayd it doesnt work because it have bootloop, but i thinks that is not too much problem getting it working again, so i started searching for the pc drivers n software, then i find here in the forum the stock rom with and without root, i tested them both with odin and the bootloop stills present. I wipe cache and do a factory reset but it keep bootlooping, then think maybe if i update to latest AT&T rom, but no luck.Sometimes the phone just start and theres no bootloop but its very rare and most of the time when i get to the lock screen or setup manager suddently a gapps or something crash and my phome freezes and reboot. I flashed the carbon-jb-v1.6 and suddently it worked fine, no more bootloop and everything smooth,no crashes etc.. then i installed Facebook app and when i was ttyping a message the phone froze up and then restarts, and the bootloop came again, and im stuck on it, and when i pass it, which is very rare, i start typing info in the startup manager and the phone freezes and reboot.. I wipe/format cache, dalvik, factory reset, formated system and data before and after flashing the carbon rom again and it keeps bootlooping. Somebody have similar problems or know how to fix it?
Thanks
P.d. sorry for my bad english.
jakov.90 said:
Hi, i have been looking for answers on the forum, and i learn new things but not how to fix this or what is causing it.
I have buyed i997 from a reseller. He sayd it doesnt work because it have bootloop, but i thinks that is not too much problem getting it working again, so i started searching for the pc drivers n software, then i find here in the forum the stock rom with and without root, i tested them both with odin and the bootloop stills present. I wipe cache and do a factory reset but it keep bootlooping, then think maybe if i update to latest AT&T rom, but no luck.Sometimes the phone just start and theres no bootloop but its very rare and most of the time when i get to the lock screen or setup manager suddently a gapps or something crash and my phome freezes and reboot. I flashed the carbon-jb-v1.6 and suddently it worked fine, no more bootloop and everything smooth,no crashes etc.. then i installed Facebook app and when i was ttyping a message the phone froze up and then restarts, and the bootloop came again, and im stuck on it, and when i pass it, which is very rare, i start typing info in the startup manager and the phone freezes and reboot.. I wipe/format cache, dalvik, factory reset, formated system and data before and after flashing the carbon rom again and it keeps bootlooping. Somebody have similar problems or know how to fix it?
Thanks
P.d. sorry for my bad english.
Click to expand...
Click to collapse
the most inexpensive solution:
http://forum.xda-developers.com/showthread.php?t=1912599
qkster said:
the most inexpensive solution:
http://forum.xda-developers.com/showthread.php?t=1912599
Click to expand...
Click to collapse
Thanks man, but you think it can be the power button? When i unplug the battery and put it again the phone doesnt turn on or something, and when it boot up when i lock the screen with the power button it works fine. I set the cpu governor to conservative and since yesterday i didnt have any problem, but sometimes the phone reboots when typing, i think its someting with the processor or when the phone have little ram or something.
Thanks.
jakov.90 said:
Thanks man, but you think it can be the power button? When i unplug the battery and put it again the phone doesnt turn on or something, and when it boot up when i lock the screen with the power button it works fine. I set the cpu governor to conservative and since yesterday i didnt have any problem, but sometimes the phone reboots when typing, i think its someting with the processor or when the phone have little ram or something.
Thanks.
Click to expand...
Click to collapse
If you ran the phone on complete stock GB or FROYO and you are getting boot loops, it may be a hardware issue.
One of the few things that will give you boot loop with the samsung logo while using the phone is the power button.
Either way, it's no big deal to open it and clean it up to see if the problem goes away.
qkster said:
If you ran the phone on complete stock GB or FROYO and you are getting boot loops, it may be a hardware issue.
One of the few things that will give you boot loop with the samsung logo while using the phone is the power button.
Either way, it's no big deal to open it and clean it up to see if the problem goes away.
Click to expand...
Click to collapse
Thanks bud, I will try cleaning the button. Also I want to ask, is there something to log everything when the phone start? Or something to test the hardware functionality?
Thank you for your time
post number #112
http://forum.xda-developers.com/showthread.php?t=1437548&page=13
qkster said:
post number #112
http://forum.xda-developers.com/showthread.php?t=1437548&page=13
Click to expand...
Click to collapse
Thank you, the post its the number #122
jakov.90 said:
Thanks bud, I will try cleaning the button. Also I want to ask, is there something to log everything when the phone start? Or something to test the hardware functionality?
Thank you for your time
Click to expand...
Click to collapse
Bootlog Uptime will keep a record of all boots from an Android OS perspective ... It will also track crashes... It won't track events outside of a complete restart (i.e. power button bootloops.. But those are pretty obvious when they occur)
For hardware testing, try Z Device Test... That won't tell you about the buttons though... If your screen turns on without pressing power button or from any other standard event (like receiving a text or a phone call), or the phone restarts by itself, time to get cleaning..
Sent from my SAMSUNG-SGH-I997 using xda premium
Zen Arcade said:
Bootlog Uptime will keep a record of all boots from an Android OS perspective ... It will also track crashes... It won't track events outside of a complete restart (i.e. power button bootloops.. But those are pretty obvious when they occur)
For hardware testing, try Z Device Test... That won't tell you about the buttons though... If your screen turns on without pressing power button or from any other standard event (like receiving a text or a phone call), or the phone restarts by itself, time to get cleaning..
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Hey thanks, that was very useful.. i risky miself to do a stock flrom flashing with pit checking the Nand erase all option in Odin 3.07, and the random reboots are gone :laugh:. Now i have one question, Do i need an special kernel for JB 4.2.2? i plan to flash the Carbon-jb-v1.6 rom but i dont know if i need another kernel
I'm glad to hear you solved your issue.
For JB, use the kernel provided with the rom.
Sent from my SAMSUNG-SGH-I997 using xda premium
i think im ****ed.. i would like opininos suggestions..im desperate right now lol sounds bad i know however
first :my power button does not seem to want to work anymore
secondly: i noticed there was a basband and firmware update and i downloaded mf1 and the modem
third: i went into my quick setings since my power buton is broken and clicked on recovery mode and clicked ok
fourth: i waited .. the little blue words appeared in the top left corner as usual, and then it says samsung galaxy s3 and hangs for a minute then shuts off and turns back on.. continuing the loop.
possiblly important infomation;
my battery level was only 24 percent and i think if i charge it up or try to get it to charge that it may work out
your probably wondering what i do when my phone dies ..
well i put it on the charger and it turns on and the charging screen pops up with the battery
then i unplug the phone and it boots up without me touching the power button .
any information will be apprciated thanks ahead of time
BTW the phone was purchased the first day it was released i think the warrenty is expired
THANKS
nightinjail said:
i think im ****ed.. i would like opininos suggestions..im desperate right now lol sounds bad i know however
first :my power button does not seem to want to work anymore
secondly: i noticed there was a basband and firmware update and i downloaded mf1 and the modem
third: i went into my quick setings since my power buton is broken and clicked on recovery mode and clicked ok
fourth: i waited .. the little blue words appeared in the top left corner as usual, and then it says samsung galaxy s3 and hangs for a minute then shuts off and turns back on.. continuing the loop.
possiblly important infomation;
my battery level was only 24 percent and i think if i charge it up or try to get it to charge that it may work out
your probably wondering what i do when my phone dies ..
well i put it on the charger and it turns on and the charging screen pops up with the battery
then i unplug the phone and it boots up without me touching the power button .
any information will be apprciated thanks ahead of time
BTW the phone was purchased the first day it was released i think the warrenty is expired
THANKS
Click to expand...
Click to collapse
The same power button issue happened to me a few weeks ago. I found a YouTube video of a guy who demonstrated slamming his phone on a table to fix it. Now I know what your thinking sounds stupid but it worked for me. Hold your phone so the side with the power button is flat on the table (this is how it needs to land). Then lift it and slam it down. I used a mouse pad to cushion the impact. Took like 20 tries but its been good ever since.
i forgot to mention.. i was planning on letting the phone completely die and then giving it some juice to see if that breaks the loop or sends it into normal boot mode i dont have the screw driver small enough to unscrew the back, if i did do you think holding the power button on the board will break the loop?
thepagel said:
the same power button issue happened to me a few weeks ago. I found a youtube video of a guy who demonstrated slamming his phone on a table to fix it. Now i know what your thinking sounds stupid but it worked for me. Hold your phone so the side with the power button is flat on the table (this is how it needs to land). Then lift it and slam it down. I used a mouse pad to cushion the impact. Took like 20 tries but its been good ever since.
Click to expand...
Click to collapse
omfg .. You solved it .. It went straight into the recovery mode
thanks man!!!!!
nightinjail said:
omfg .. You solved it .. It went straight into the recovery mode
thanks man!!!!!
Click to expand...
Click to collapse
Awesome!
nightinjail said:
omfg .. You solved it .. It went straight into the recovery mode
thanks man!!!!!
Click to expand...
Click to collapse
but it frezzes !!! And goes back into the loop wtf!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
nightinjail said:
but it frezzes !!! And goes back into the loop wtf!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
As I said it took me a few tries I also remember putting a crappy thumdrive under the mouse pad to get more impact on the button. Not sure how hard I did it. Oh and take your battery out.
OMFG THANKS MAN .. YOU REALLY.. JUST SAVED ME lol .. no idea how happy i am .. will post what i did incase someone else has this happen to them.
1. i panicked
2. banged the **** out of the side like instructed and was getting it into recovery mode ..
3. was trying to do a reboot system
3a. it froze and reset it self again forceing me to bang the hell out of it agian and agian
3b. more banging and more freezing
4. finally it let me reboot system and it turned on .. and now my power button seems to be working again
EPILOGUE: my basband and firmware are all out of date and would love to update them but seeing as how f-ed my galaxy is im afraid to even do that anyone have any suggestions? thanks freinds
may the force be with you
nightinjail said:
OMFG THANKS MAN .. YOU REALLY.. JUST SAVED ME lol .. no idea how happy i am .. will post what i did incase someone else has this happen to them.
1. i panicked
2. banged the **** out of the side like instructed and was getting it into recovery mode ..
3. was trying to do a reboot system
3a. it froze and reset it self again forceing me to bang the hell out of it agian and agian
3b. more banging and more freezing
4. finally it let me reboot system and it turned on .. and now my power button seems to be working again
EPILOGUE: my basband and firmware are all out of date and would love to update them but seeing as how f-ed my galaxy is im afraid to even do that anyone have any suggestions? thanks freinds
may the force be with you
Click to expand...
Click to collapse
Trust me I know the feeling. I had soft bricked my phone after I tried to downgrade from 4.3 (before the fix was found) right after I thought I found the solution my phone was doing the power loop. Scared the crap out of me.
can i update my firmware and baseband with odin ? or do you reccommend me downloading clockwork mod and using that instead of teamwin ? i want slim kat .. seems alot better then this 4.1.3 bull**** lol .. althought the bone stock rom was very very very trusty.
my next question is should i instal the firmware first hen the modem then the rom i want ?
nightinjail said:
can i update my firmware and baseband with odin ? or do you reccommend me downloading clockwork mod and using that instead of teamwin ? i want slim kat .. seems alot better then this 4.1.3 bull**** lol .. althought the bone stock rom was very very very trusty.
my next question is should i instal the firmware first hen the modem then the rom i want ?
Click to expand...
Click to collapse
I personally like twrp more. yes you can update that stuff with odin i think there are links in the development section. As long as you do a factory reset and dalvik format you should beable to flash whatever you want now. It is recommended to be on at least 4.1.2 modem for ROMs. If you flash the 4.3 modem make sure it is only the modem and not the full firmware. You will be on a locked bootloader if you do.
nightinjail said:
can i update my firmware and baseband with odin ? or do you reccommend me downloading clockwork mod and using that instead of teamwin ? i want slim kat .. seems alot better then this 4.1.3 bull**** lol .. althought the bone stock rom was very very very trusty.
my next question is should i instal the firmware first hen the modem then the rom i want ?
Click to expand...
Click to collapse
ThePagel said:
I personally like twrp more. yes you can update that stuff with odin i think there are links in the development section. As long as you do a factory reset and dalvik format you should beable to flash whatever you want now. It is recommended to be on at least 4.1.2 modem for ROMs. If you flash the 4.3 modem make sure it is only the modem and not the full firmware. You will be on a locked bootloader if you do.
Click to expand...
Click to collapse
The basebands available to flash are zips flashable only through recovery. Have been for a while now.
I followed some instructions to unlock boot loader and i flashed twrp through adb. now if i try to go recovery mode its shows a screen "Your device software cannot be checked for corruption. Lock the bootloader."
Plz help me asap
parthaxda007 said:
I followed some instructions to unlock boot loader and i flashed twrp through adb. now if i try to go recovery mode its shows a screen "Your device software cannot be checked for corruption. Lock the bootloader."
Plz help me asap
Click to expand...
Click to collapse
Please relax as all of our phones say that now. I have to say it is quite annoying at times but it will not affect your phone in any negative way. The only coception is that you must watch to make sure you hit the power key when that comes on. If you ever forget it will keep rebooting to that screen and all you have to do is remove the battery and make sure to hit power the next time. I wish there was a way to get rid of it, but the only way is to lock bootloader again. I have never triedbpersonally but have heard it will brick your device because of twrp and the modification to the system. It could be fixed if you decide to try. It would just be a pain in the butt...lol I hope this helps...
remarkablecow913 said:
Please relax as all of our phones say that now. I have to say it is quite annoying at times but it will not affect your phone in any negative way. The only coception is that you must watch to make sure you hit the power key when that comes on. If you ever forget it will keep rebooting to that screen and all you have to do is remove the battery and make sure to hit power the next time. I wish there was a way to get rid of it, but the only way is to lock bootloader again. I have never triedbpersonally but have heard it will brick your device because of twrp and the modification to the system. It could be fixed if you decide to try. It would just be a pain in the butt...lol I hope this helps...
Click to expand...
Click to collapse
now how can i open twrp ? i installed and i press power key and volume down doesnt help that messege coming on screen.
parthaxda007 said:
now how can i open twrp ? i installed and i press power key and volume down doesnt help that messege coming on screen.
Click to expand...
Click to collapse
XxThat partisa little tricky. From off:
Press & hold both buttons for about two full seconds. At this point release ONLY the power button, but only for half a second. Immediately! press it again (Never let go of volume down) Keep holding until you see a White Screen popup asking to factory reset. Now you can let go of Vol key. Select yes, and then ANOTHER white screen will ask you the same thing, to confirm the first screen. Select yes again. IMMEDIATELY start holding down both vol down and power again. You'll see a warning screen pass by. Let go of power key and quickly press again and hold (never letting go of volume) soon the red lwd light will come on and the splash screen for twrp will start and you re in.
It does take some patience and good timing. In time it becomes second nature and you learn to set up ways to boot directly to recovery from your operating system that way you don't have to do all the key crap. Lol. Make sure when you installed twrp that you removed the battery to power off phone. Also if you have booted your phone to use it without going into twrp first to finish the instructions from the post, which I'm sure you have, i couldn't go without my phone for long. You are going to have to do the install of twrp again. It is very important to boot into twrp first otherwise the stock system will overwrite twrp with it's own recovery again. It sucks but since your boot loader is already unlocked you won't lose all your data this time around. It's just connecting to your computer and using the fast boot commands that you used before. Make sure your twrp.img is in the same folder location as your fastboot\adb and you'll be golden.
Good luck :laugh:
remarkablecow913 said:
XxThat partisa little tricky. From off:
Press & hold both buttons for about two full seconds. At this point release ONLY the power button, but only for half a second. Immediately! press it again (Never let go of volume down) Keep holding until you see a White Screen popup asking to factory reset. Now you can let go of Vol key. Select yes, and then ANOTHER white screen will ask you the same thing, to confirm the first screen. Select yes again. IMMEDIATELY start holding down both vol down and power again. You'll see a warning screen pass by. Let go of power key and quickly press again and hold (never letting go of volume) soon the red lwd light will come on and the splash screen for twrp will start and you re in.
It does take some patience and good timing. In time it becomes second nature and you learn to set up ways to boot directly to recovery from your operating system that way you don't have to do all the key crap. Lol. Make sure when you installed twrp that you removed the battery to power off phone. Also if you have booted your phone to use it without going into twrp first to finish the instructions from the post, which I'm sure you have, i couldn't go without my phone for long. You are going to have to do the install of twrp again. It is very important to boot into twrp first otherwise the stock system will overwrite twrp with it's own recovery again. It sucks but since your boot loader is already unlocked you won't lose all your data this time around. It's just connecting to your computer and using the fast boot commands that you used before. Make sure your twrp.img is in the same folder location as your fastboot\adb and you'll be golden.
Good luck :laugh:
Click to expand...
Click to collapse
thank you so much it worked
parthaxda007 said:
thank you so much it worked
Click to expand...
Click to collapse
Sweet. I'm glass I could help. There are a couple of great custom ROMs that are available for this device now. You came at the perfect time. We hand only had these for a couple weeks now. And the gutta that have been working on them have kicked some major butt.
@messi2050 @cospalet and @Travisholt92
If you enjoy the awesomeness make sure to give these guys thanks by hitting the thumbs at the bottom. Hours are spent mostly non paid hours to bring this stuff to us. And I'd live one too but I don't really deserve one. I'm just here to help the brainiacs with what little I can
This build we are still working on the most. It is working but needs a little tweaking still. You're welcome to downloadand help by report any bugs you find.
https://forum.xda-developers.com/android/development/rom-unofficial-aicp-lg-stylo-3-plus-t3745507
.
This one and the next are both well refined and only have a couple of bugs that are being worked on. I would re commend these for the moment of you are looking for something for a daily driver that you can set up and forget. The remix has a lot of themeing built into it and the lineage is a classic with tons of streamlining and minimal bloat. Very good on these mid range phones.
https://forum.xda-developers.com/an...unofficial-lineageos-lg-stylo-3-plus-t3749201
https://forum.xda-developers.com/android/development/rom-unofficial-ressurection-remix-lg-t3751841
remarkablecow913 said:
Sweet. I'm glass I could help. There are a couple of great custom ROMs that are available for this device now. You came at the perfect time. We hand only had these for a couple weeks now. And the gutta that have been working on them have kicked some major butt.
@messi2050 @cospalet and @Travisholt92
If you enjoy the awesomeness make sure to give these guys thanks by hitting the thumbs at the bottom. Hours are spent mostly non paid hours to bring this stuff to us. And I'd live one too but I don't really deserve one. I'm just here to help the brainiacs with what little I can
This build we are still working on the most. It is working but needs a little tweaking still. You're welcome to downloadand help by report any bugs you find.
https://forum.xda-developers.com/android/development/rom-unofficial-aicp-lg-stylo-3-plus-t3745507
.
This one and the next are both well refined and only have a couple of bugs that are being worked on. I would re commend these for the moment of you are looking for something for a daily driver that you can set up and forget. The remix has a lot of themeing built into it and the lineage is a classic with tons of streamlining and minimal bloat. Very good on these mid range phones.
https://forum.xda-developers.com/an...unofficial-lineageos-lg-stylo-3-plus-t3749201
https://forum.xda-developers.com/android/development/rom-unofficial-ressurection-remix-lg-t3751841
Click to expand...
Click to collapse
Having another problem after enable lucky patcher in xposed. So when i install someting in google ..its saying error 504 and i tried clear cache and data everything nothing worked. then i downloaded the same app from internet and while install its saying file cant be install coz its corrupted then i found out the issue .. the issue is solved when i disable luckypatcher in xposed .. i tried disable .apk verification in lucky patcher but didnt get any help. So now i can install and keep lucky patcher enable at the same time ??/ thank you
parthaxda007 said:
Having another problem after enable lucky patcher in xposed. So when i install someting in google ..its saying error 504 and i tried clear cache and data everything nothing worked. then i downloaded the same app from internet and while install its saying file cant be install coz its corrupted then i found out the issue .. the issue is solved when i disable luckypatcher in xposed .. i tried disable .apk verification in lucky patcher but didnt get any help. So now i can install and keep lucky patcher enable at the same time ??/ thank you
Click to expand...
Click to collapse
Im not sure actually . I know around here lp is a bad word. These guys all work hard developing stuff and i don't think youll find any help on any forums in XDA. Ive never messed with it personally so i wouldnt even know where to point you on that. Maybe their website?? Sorry. Good luck
FP
remarkablecow913 said:
Sweet. I'm glass I could help. There are a couple of great custom ROMs that are available for this device now. You came at the perfect time. We hand only had these for a couple weeks now. And the gutta that have been working on them have kicked some major butt.
@messi2050 @cospalet and @Travisholt92
If you enjoy the awesomeness make sure to give these guys thanks by hitting the thumbs at the bottom. Hours are spent mostly non paid hours to bring this stuff to us. And I'd live one too but I don't really deserve one. I'm just here to help the brainiacs with what little I can
This build we are still working on the most. It is working but needs a little tweaking still. You're welcome to downloadand help by report any bugs you find.
https://forum.xda-developers.com/android/development/rom-unofficial-aicp-lg-stylo-3-plus-t3745507
.
This one and the next are both well refined and only have a couple of bugs that are being worked on. I would re commend these for the moment of you are looking for something for a daily driver that you can set up and forget. The remix has a lot of themeing built into it and the lineage is a classic with tons of streamlining and minimal bloat. Very good on these mid range phones.
https://forum.xda-developers.com/an...unofficial-lineageos-lg-stylo-3-plus-t3749201
https://forum.xda-developers.com/android/development/rom-unofficial-ressurection-remix-lg-t3751841
Click to expand...
Click to collapse
Any idea how to fix fingerprint scanner not working on stock after flashing Lineage 14.1 or RR?
Any ideas is appreciated.
Thanks,
zach
coolbeans2016 said:
Any idea how to fix fingerprint scanner not working on stock after flashing Lineage 14.1 or RR?
Any ideas is appreciated.
Thanks,
zach
Click to expand...
Click to collapse
The only thing that I have heard to work is to go back to your rom that you registered your fingerprint on and delete them manually from that rom. So restore your backup and delete from there. If there isn't a backup than I suppose you could try to manually reinstall stock and make new prints and then delete them, then try to switch rom. I'm not sure why that has been a problem and I personally don't use fp to unlock phone, so I am not the best for advice on this. I hope you figure it out