Sunday i uninstalled an app called MonsterUI, then, I starded to receive a lot of errors (Whats app stopped, Google stopped, xperia stopped...) So I decided to reset my phone, but after that my phone freezes in SONY logo
I already tried PC COMPANION and Flashmode, the led color change, but my computer dont reconigze my xperia
Otherwise, My computer recognize my phone in FLASHBOOST mode... So are anything that I can do? I dont know.. some way to flash my phone using flashboot mode? Thank you guys!
Sorry for my english btw
Try Flashtool
Sent from my D2203 using XDA Free mobile app
Just switched off,Open back cover near sim slot small hole press via toothpick and charge your device,Now download firmware for your device,flash it via Flashtool,thats it,
Mainaharen said:
Just switched off,Open back cover near sim slot small hole press via toothpick and charge your device,Now download firmware for your device,flash it via Flashtool,thats it,
Click to expand...
Click to collapse
doesnt work man
Related
Hi guys. New to this forum
So I have a few issues regarding my arc:
1. Camera not working, after I launch camera app, it turns black without responding so I have to reboot the phone.
2. The Home button does not work, only works to unlock the phone when it's locked(not in use). But I can not use it to get home to "desktop" when I'm using an app, I have to use the "back" button.
3. Plugging the arc to the PC does not work at all neither, the "popup" in the phone does not show up when i plug it in the PC, it only starts to charge the phone. At the computer, it fails to install the MTP USB driver.
All this happened when I reset the phone to factory defaults and formatted everything. The phone started up fine, like a new phone but those 3 problems showed up. It is probably because the phone was rooted when I reset to factory defaults.
What is my next step? Possible to recover to the original OS? I have not taken any backups(silly me) before I did anything neither.
Thanks in advance!
Had the same problem, I flashed the phone, using LT15i_4.0.1.A.0.283_Generic Global. Everything is working properly now. Hope that helps.
MarkRutte said:
Had the same problem, I flashed the phone, using LT15i_4.0.1.A.0.283_Generic Global. Everything is working properly now. Hope that helps.
Click to expand...
Click to collapse
How was this done? Do I need to connect the phone to the computer? If so, it will be a issue because I can not connect it to my computer anymore.
Can anyone give me link to the flash tool that works on my arc?
I Have the same problem. Please, someone help me...
Just reflash firmware with SEUS
I seriously can't find SEUS anywhere to my phone. And will it be possible to flash it because I can't connect the phone to my computer without issues.
What happens in device manager when you click "back" with turned off phone and connect cable?
nothing happens on my phone, but I can't turn the phone on if I do it that way, I have to replug the charger to be able to turn it on. On my computer it said it failed to install the driver.
It's quite of an emergency atm. I can't recieve calls anymore, the phone hangs up on people when they call me automatically, but I can call them without a problem. I can see in my call log if anyone has tried to call me aswell.
Need some more help guys
Super thanks in advance.
Problem solved! The ones who still have this problem follow this guide :
http://www.theandroidsoul.com/tutorial-how-to-flash-a-firmware-using-flashtool-on-xperia-arc/
don't download the firmware that is on that guide but use this : http://www.megaupload.com/?d=VS2D704A
Worked perfectly!
Flashing with SEUS would have done exactly the same thing
Jinx13 said:
Flashing with SEUS would have done exactly the same thing
Click to expand...
Click to collapse
Really? Can you link it to me? According to the SE website, SEUS does not exist to xperia arc.
SE PC Companion could not find my arc when I plugged it into my PC, but flashtool did. So I guess SEUS would'nt detect my phone neither.
Lol flashed my girlfriends arc with seus last night, go to se site pick any phone model w995 etc and software downloads then download seus. When the program opens select arc and follow instructions. Either that or use flashtool and just flash new firmware it does the same
Sent from my LT15i using xda premium
Would SEUS find my phone when the Companion doesnt anyway?
It should do as for PC companion you have your phone turned on and SEUS/flashtool etc you turn your phone off
Hi there.
Yesterday, for no apparent reason de device stopped syncing my Gapps data. OEM 2.1 ROM. I did a backup and reset the device to factory defaults. Even if battery went to 100% and the USB cable were connected, the phone did not finished the process and now I have a non turning on mini pro. Mac does not feel it, neither Windoze or Linux with dmesg. PC Companion won´t see it neither. Neither FlashTool. I tried to flash it with the original ftf but the phone do not turn on and of course FlashTool won't see it. Tried pressing home and on/off but nothing. I searched like a dork for "bricked xperia x10 mini pro" but there´s a lot of crowd calling a semi-bricked, bricked. Which is not, because a semi-bricked can be repaired with SEUS or even FlashTool.
I know is a whole different animal, but once I bricked a Nokia and with some trickery the device came to life.
Guys, you`re my only hope. I really like this phone for texting and everything.
Thank you for reading. Best regards.
Bump!
Please help me out! At least tell me anything.
Thanks.
same issue
hi,
I am facing the same problem. If u find any solution plz help me.
Guys, i have exactly same problem. I tried connect my U20i using usb cable, but it wont detect my phone. It only charge the phone and wont sync it. Its happen when i restore to factory setting. So if somebody can help me, i really appreciate it. Anyway sorry for my broken english.
Sent from my MT11i using xda app-developers app
PC Companion dont need to see device for repair as u can see at here
bad quality but i think its no hard to see how to do it, hope it will help u
DemoSK said:
PC Companion dont need to see device for repair as u can see at here
bad quality but i think its no hard to see how to do it, hope it will help u
Click to expand...
Click to collapse
What do you mean?
When PC Campanion says "hold back key and connect phone to USB" then It detects the device.
I have bricked SE Xperia X10 mini pro, same simptoms phone doesn't react to anything it's absolutely silent, no image, no text.
And yes I tried SEUS, PC Companion, Flashtool (with ggsetup) and Omnius. Nothing hepled.
May be a battery is down but I can't check it as well.
Same here. The phone doesn't react to "off" button, No LEDs, no display, no sound, won't get recognized by Flashtool when USB plugged in with "back" held, a total, real brick, dark and dead and invisible to all software.
The battery was full - it was full when the phone got bricked by installing a kernel for ICS.
helllppp
sharp_fang said:
Same here. The phone doesn't react to "off" button, No LEDs, no display, no sound, won't get recognized by Flashtool when USB plugged in with "back" held, a total, real brick, dark and dead and invisible to all software.
The battery was full - it was full when the phone got bricked by installing a kernel for ICS.
Click to expand...
Click to collapse
I have the same problem please help:crying:
When you put the tick called "preloader" in Flashtools - then the phone is dead... now only jtag method may can help you(in some phone service)
I remember that one morning I found my Xperia Arc S with stock GB 2.3.4 rom like dead although it was fine when I plugged the charger in before I slept. In the morning I couldn't turn it on, removing and replacing battery did nothing. No light when I charged it. It was really looking like it was forever dead. After a few days, in despair, I tried every reset method I could find about Xperia phones, except the one that finally worked:
I holded the back or menu button (I forgot which one) then plugged in the USB cordon to the computer. I got a green or blue light! I learned later that it was Fastboot mode or Flash mode. Then I unplugged the device, and it started like if nothing happened. I only had this problem once again. Since I rooted it and installed a custom rom, I never had this issue again.
If you didn't try this yet, that is worth trying
Bricked Sony Xperia X10 Mini Pro (U20)
Hi, I really need your help.
I have bricked my Xperia x10 Mini Pro (u20)
I had CM7 Custom Mod running on my phone,
I update CWM 2.0 to 5. something and suddenly it stop working.
It hangs at the Sony Ericsson Boot Logo.
It won't enter into Recovery Mode.
I tried the PC Companion Repair, but it won't go past the "press and hold the back Key"
Because my PC won't recognize my Phone. (I had the SEMC USB drivers installed already)
Please help!!! Thank you
nihilon said:
Hi there.
Yesterday, for no apparent reason de device stopped syncing my Gapps data. OEM 2.1 ROM. I did a backup and reset the device to factory defaults. Even if battery went to 100% and the USB cable were connected, the phone did not finished the process and now I have a non turning on mini pro. Mac does not feel it, neither Windoze or Linux with dmesg. PC Companion won´t see it neither. Neither FlashTool. I tried to flash it with the original ftf but the phone do not turn on and of course FlashTool won't see it. Tried pressing home and on/off but nothing. I searched like a dork for "bricked xperia x10 mini pro" but there´s a lot of crowd calling a semi-bricked, bricked. Which is not, because a semi-bricked can be repaired with SEUS or even FlashTool.
I know is a whole different animal, but once I bricked a Nokia and with some trickery the device came to life.
Guys, you`re my only hope. I really like this phone for texting and everything.
Thank you for reading. Best regards.
Click to expand...
Click to collapse
best solution is to find a person who can jtag
after trying to install a custom rom, my xperia does not turn on, only thing it does is vibrate when I try and turn the green led to there. I tried the PC Companion and Sony Update Service and does not recognize my phone, and when I connect the phone to a windows with PCC detects a device called: (null) when I see him I'm going to repair the operating system but when I connect it asks not detects it and finally, I tried flashtools but there is no answer.
PD
I've tried removing the battery and sim card
Download flash tool and stock tipo rom and flash it
Sent from my ST21i using xda app-developers app
Check this thread:
http://forum.xda-developers.com/showthread.php?t=2081930
uve got urself a soft bricked tipo my friend :cyclops:
I tryed toO
muham47 said:
Download flash tool and stock tipo rom and flash it
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
yes dude i read this solution all over the places but has i said before my pc can not find my xperia and that is a big problem
au081 said:
yes dude i read this solution all over the places but has i said before my pc can not find my xperia and that is a big problem
Click to expand...
Click to collapse
switch off phone remove battery re insert battery then go in flashmode in flash tool select your xperia stock.ftf file ( Stock firmware ) then connect your device holding Volume down button until it recognises ur device
If the phone vibrates and shows 3 Green or Red LEDs it is hard bricked and sent it in to Sony for Repair
Sometimes that happens me but only remove the battery connect to pc ,insert the battery and the flash starts
muham47 said:
Download flash tool and stock tipo rom and flash it
Sent from my ST21i using xda app-developers app
Click to expand...
Click to collapse
what happens if i again install cm10
ADB Drivers
au081 said:
after trying to install a custom rom, my xperia does not turn on, only thing it does is vibrate when I try and turn the green led to there. I tried the PC Companion and Sony Update Service and does not recognize my phone, and when I connect the phone to a windows with PCC detects a device called: (null) when I see him I'm going to repair the operating system but when I connect it asks not detects it and finally, I tried flashtools but there is no answer.
PD
I've tried removing the battery and sim card
Click to expand...
Click to collapse
sometimes the problem is adb drivers.. search on google and download ....install then connect flashtool..
if u have bootloader unlocked.... Switch on key + (minus) hold both and a green led will lit up..
here the link for help
http://forum.xda-developers.com/xperia-j-e/general/xperia-miro-tipo-flashing-dummies-how-t2246059
i got the same problem help me pleas
after trying to update from zip file my phone ,does not turn on, only thing it does is vibrate when I try and turn the green led , I tried the PC Companion and Sony Update Service and does not recognize my phone like it doesn't plugged in, even flashtool dosen complet all steps it just complet 2 steps and it stop i dont know what to do ???!!!!!
Hey guys, so I was updating to latest Kitkat firmware OTA and the android guy with the red exclamation point appeared and boot looped.
So, I used Flashtool to correct this and... the phone died.
Can't power on, doesn't vibrate, no SONY logo, no LED blinking, nothing.
Windows installs drivers for QHSUSB_BULK and that's it.
In device manager it appears as SOMC Flash Device anda flashtool detects it but, I can't do anything about it.
15/012/2015 00:12:50 - INFO - Device connected with USB debugging off
15/012/2015 00:12:50 - INFO - For 2011 devices line, be sure you are not in MTP mode
That's what I get.
From searching around I think the boot partition is gone (?)
Does anyone know how to fix this? I'm completly stuck here.
Did you try to turn it off with reset by the sim card? Then hold volume down (- button) connect to usb and flash ftf.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Dzepar said:
Did you try to turn it off with reset by the sim card? Then hold volume down (- button) connect to usb and flash ftf.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse
Thanks for the quick reply!
Just did now, still the same thing.
PTGageto said:
Thanks for the quick reply!
Just did now, still the same thing.
Click to expand...
Click to collapse
It probably (hopefully) got stuck. Try to (soft) reset it. There is a very small button next to the SIM card slot. You would need a needle or something that small to push it. If that doesn't work I am afraid it would be better to take it to Sony assistance.
Miche1asso said:
It probably (hopefully) got stuck. Try to (soft) reset it. There is a very small button next to the SIM card slot. You would need a needle or something that small to push it. If that doesn't work I am afraid it would be better to take it to Sony assistance.
Click to expand...
Click to collapse
I've been using that button since forever...
Do you think it's related to the loader partition or something?
Maybe you ran out of battery? Does your phone charger when you plug in? Also try different usb, reboot your pc then try again. I had softbrick my phones few times but always fix it with Flashtool.
Press power off button (small one by the sim) and leave the phone, Open Flashtool, select ftf wait for the popup dialogue, press volume down, connet phone to usb. This is proces i always do.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Dzepar said:
Maybe you ran out of battery? Does your phone charger when you plug in? Also try different usb, reboot your pc then try again. I had softbrick my phones few times but always fix it with Flashtool.
Press power off button (small one by the sim) and leave the phone, Open Flashtool, select ftf wait for the popup dialogue, press volume down, connet phone to usb. This is proces i always do.
Good Luck.
Xperia M2 D2303 on K.K. 4.4.4
Click to expand...
Click to collapse
Well, I tried everything.
I sent it to SONY now, thanks anyway guys
PTGageto said:
Hey guys, so I was updating to latest Kitkat firmware OTA and the android guy with the red exclamation point appeared and boot looped.
So, I used Flashtool to correct this and... the phone died.
Can't power on, doesn't vibrate, no SONY logo, no LED blinking, nothing.
Windows installs drivers for QHSUSB_BULK and that's it.
In device manager it appears as SOMC Flash Device anda flashtool detects it but, I can't do anything about it.
15/012/2015 00:12:50 - INFO - Device connected with USB debugging off
15/012/2015 00:12:50 - INFO - For 2011 devices line, be sure you are not in MTP mode
That's what I get.
From searching around I think the boot partition is gone (?)
Does anyone know how to fix this? I'm completly stuck here.
Click to expand...
Click to collapse
Hello i know this is diferent phone but maybe this help somehow to repair http://forum.xda-developers.com/showthread.php?t=2476972
http://forum.xda-developers.com/showthread.php?t=2582142
http://forum.xda-developers.com/showthread.php?t=2477595
i repair my phone with same problem QHSUSB_BULK
Miche1asso said:
It probably (hopefully) got stuck. Try to (soft) reset it. There is a very small button next to the SIM card slot. You would need a needle or something that small to push it. If that doesn't work I am afraid it would be better to take it to Sony assistance.
Click to expand...
Click to collapse
OMFG I LOVE YOU , YOU HAVE NO F*CKING IDEA HOW MUCH
Thanks again dude .
I got stucked by flashing the bootloader upgrade to root it ( gonna de-bloat it 'cause i need more space for some more 2pac songs ). Gonna retry now !
help
can not send him for assistance because I no longer invoice how do I make my xperia call back
you save my life, thank you
I have the same problem, hard brick
FrWhyMe said:
OMFG I LOVE YOU , YOU HAVE NO F*CKING IDEA HOW MUCH
Thanks again dude .
I got stucked by flashing the bootloader upgrade to root it ( gonna de-bloat it 'cause i need more space for some more 2pac songs ). Gonna retry now !
Click to expand...
Click to collapse
Can you help me? i have a Sony Xperia M2 (D2306) bootloader locked with hardbrick, not enter to flash mode, the pc not detect, and not power on, only when i plug the usb, but only 1 second, in the first sony logo (no bootanimation) and i get bootloop
please help me :C sorry for my bad english
Have a good read through this thread it may be of some help
http://forum.xda-developers.com/showthread.php?p=38567003
D2303 5.1lollipop customised NCB LB rooted Nuts t2u dual recovery bravia engine 2+x-reality debloated viper audio
Boot Loop may be a problem
If your device get disconnected every 5-7 seconds than it is a bootloop which is not showing on screen but you can observe it in device manager
And you have to try different key combination to stop that boot loop while flashing
:fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
hello there...any new solutions? i think my xperia v getting hard brick...just detect on device manager as qualcom...problem is cant charging....cant turn on...no nothing....please help
So I got the ST23i for free and knew it was broken. I wanted to repair it but with no success (yet), so I hope, you, the XDA community can help me.
I've tried to boot normal, to recovery and to flash mode but nothing happens. I had the phone on the charger for some hours. When I take out the battery, put it back in and connect it to my Win 8.1 PC the red LED (top) lights up for a split second. That's it.
Flash tool and Sony Companion Software can't detect my phone.
Any ideas?
Polyparadox said:
So I got the ST23i for free and knew it was broken. I wanted to repair it but with no success (yet), so I hope, you, the XDA community can help me.
I've tried to boot normal, to recovery and to flash mode but nothing happens. I had the phone on the charger for some hours. When I take out the battery, put it back in and connect it to my Win 8.1 PC the red LED (top) lights up for a split second. That's it.
Flash tool and Sony Companion Software can't detect my phone.
Any ideas?
Click to expand...
Click to collapse
Most likely it's hard-bricked, but you could try to see if fastboot can detect it, if it can you can run command prompt ( assuming you have Android SDK installed ) and fastboot flash a kernel with recovery