So I tried to run CM10 on my stock KK 4.4.2 and it didin't went well, it got bootlooped. So I wiped the /data and /cache and formated the /system.
After that I tried to run the stock rom of JB and it didn't work as well. Now I'm stuck in the bootloader warning screen.
Note: I can actualy enter the fastboot and recovery modes, but my battery is LOW.
So can you guys please help me? Or is my phone dead?
Note 2: sorry for bad english, I'm not from US or UK.
Related
Hey all.
I started with a regular moto g XT1032 (sim free Irish bought), and followed this guide - http://forum.xda-developers.com/moto-g/general/gpe-ota-lrx21z-5-0-1-xt1033-xt1032-t2969847 to convert to GPE and install lolllipop.
After following the steps, the phone reboots and it stays on the Google boot logo with an unlocked padlock. When I boot into fastboot and look at the screen, it says "hab check failed for boot" in pink.
I have tried flashing CWM via MotoToolAIO and installing ROMs but that won't work either.
I seemed to have bricked the phone and I can't actually boot into android.
Could I get some help please? Thank you
I usually have the same problem when swapping between GPE and non-GPE, try this method: http://forum.xda-developers.com/showthread.php?t=2626803
hi to everyone,
i cannot find anything on my problem here.....
i have a moto g (xt1033) asiaretail, the bootloader(41.18) is unlocked with the status code 3.
it bricked when i tried to restore stock firmware(lollipop) 2 days ago.
when i try to restore the stock firmware, rsd does't report any problem, the bootloader neither(also do it through command), but thme smartphone is stucked in bootloader mode...i tried to install custom recoveryes but all of them ( twrp and cwm) report the same problem: cant' mount /cache , can't mount /system
in this way i cannot flash nothing.....i'm without a mobile.....help me please....
mostwantedxda said:
hi to everyone,
i cannot find anything on my problem here.....
i have a moto g (xt1033) asiaretail, the bootloader(41.18) is unlocked with the status code 3.
it bricked when i tried to restore stock firmware(lollipop) 2 days ago.
when i try to restore the stock firmware, rsd does't report any problem, the bootloader neither(also do it through command), but thme smartphone is stucked in bootloader mode...i tried to install custom recoveryes but all of them ( twrp and cwm) report the same problem: cant' mount /cache , can't mount /system
in this way i cannot flash nothing.....i'm without a mobile.....help me please....
Click to expand...
Click to collapse
You probably are flashing the incorrect firmware or are missing a few steps in the firmware flashing procedure. Often, people forget to flash the sparsechunk.3 file (since the previous versions only had it till .2 )
Follow the following guide, step by step, perfectly, and you'll be fine.
http://forum.xda-developers.com/moto-g/general/lollipop-stock-rom-t3018568
Hi everyone,
I recently flashed my zte blade g with cm 10.1 . I did not liked it, so i decided to restore from cyanogenmod rom to stock rom (telenor serbia) via cwm recovery, i had problem with /sistem not being able to restore, so i formated /system and, again, wiped all data in phone, but i was still getting the same error. From my previous flash experience, i remembered that, in order to try different custom rom for my earlier phone, i needed to change the version of cwm recovery. So i tried to flash from 6.0.3.4 down to 5.0.2.0 version of cwm (which was a bad idea) , by editing flash.bat to flash different file to phone. And now, my phone turn on, enter in welcome screen (screen that show up first at the startup, before cyanogenmod loading animation, and before booting into recovery) and i cannot do anything except restarting it, i tried to reflash previous working cwm, but now it won't detect device.
Is there any way to solve it, since it is not yet fully dead?
Hi,
Thanks for using XDA Assist Please post it here Blade General for better response
Good Luck!
Hello
I have a xt925 that after behaving strange for a few days now is stuck on boot with a pulsating M.
A factory reset did not help so my guess is that some file somewhere is corrupt.
I can get into recovery mode or fastboot mode and RSD lite can talk to the phone.
Can I simply flash a stock motorola ROM? Or will that brick it even further since it was running kitkat before it broke?
Will any stock ROM do?
No the bootloader is not unlocked and I prefer not to do that.
Hey guys, I'm trying to port CWM to galaxy A5. I tested it by flashing the recovery with odin about 5 times, but odin flashed it to bootloader (download mode). The problem is that when I rebooted my phone (my ROM is CM13), it stucked on bootanimation. I've tried flashing stock ROM and it booted fine, I've tried flashing CM12 and it booted fine, but when i re-flashed CM13 it stucked on bootanimation. I think that it isn't a ROM problem, because before testing the CWM recovery it worked well. I've also typed adb reboot bootloader (I know that samsung devices doen't have bootloader, but I was curious to try it ). So, I think that I've damaged some partition but I need help.
Sorry for my english, too
DeadSquirrel01 said:
Hey guys, I'm trying to port CWM to galaxy A5. I tested it by flashing the recovery with odin about 5 times, but odin flashed it to bootloader (download mode). The problem is that when I rebooted my phone (my ROM is CM13), it stucked on bootanimation. I've tried flashing stock ROM and it booted fine, I've tried flashing CM12 and it booted fine, but when i re-flashed CM13 it stucked on bootanimation. I think that it isn't a ROM problem, because before testing the CWM recovery it worked well. I've also typed adb reboot bootloader (I know that samsung devices doen't have bootloader, but I was curious to try it ). So, I think that I've damaged some partition but I need help.
Sorry for my english, too
Click to expand...
Click to collapse
Anyone?