Related
Andromadus - Test Builds
To start with here you will find test versions of ROMs built by me from the Andromadus github repo http://github.com/Andromadus, think of them along the same concept as nightly builds just not every night These are development ROM's, if you want to run bleeding edge development ROM's and at least know how to use adb and logcat then you might find something of interest here. If you require something that works 100% of the time all of the time then this might not be for you. That said you can always give it a try and if it doesn't work restore your previous nandroid backup!
What IS Andromadus?
Initially it was a group of people who got together to make ICS work on the HTC Desire Z because nobody else seemed to want to support devices with physical hardware keyboards/trackpads. Whilst the idea stays the same It has grown slightly to support some other hardware and some of the work we have done is now used in many other devices. Andromadus builds of CM10 or CM10.1 are basically CM sources with a few additional tweaks or additions to support our phones.
1. New versions will be added as and when I feel there are enough changes to warrant one, don’t ask when the next version is coming.
2. If we decide to release a "Stable" version of these roms they will be published in another Andromadus thread.
Direct all your queries with release versions to that thread and in the same vain do not discuss these releases anywhere but here.
3. I will do as best I can to answer questions but if you don't get an answer from me I'm sure somebody else will be along to help. Help each other and I have more time to spend fixing things!
4. Don't ask for what's changed since the previous version, have a look at the recent submits on the Andromadus github if you want to know or wait for the mini changelogs when I post a new release.
5. If there is something in particular to test it'll be mentioned!
6. As always if you didn't wipe between installations then at least verify that the problem exists on a clean install before posting here. Nandroid/superwipe/install/check at the end of the day you can always restore your nandroid if the problem is reproducible on a clean installation. If you can't be bothered to try this then I really can't be bothered to try to help you :>
7. All that said ensure you make a nandroid/backup before hand. I take no responsibility for what you do to your phone with these ROM.
8. Whilst I can't stop you I would rather these builds were not used as a base for any ROM/MOD/ETC. The source is all available if you want to do your own builds with which you can do whatever you like.
9. Tell us what works/what's worse/what's better but don't ***** when something breaks or isn't fixed yet, report it and move on.
10. Sometimes people forget that we do this for fun, for ourselves, and sometimes your super important issue is way down on our personal list of things to be fixed.
If you ignore any of the above you will in turn be ignored.
Now that's all out of the way as always have fun
As usual you need to flash the ROM then GAPPS.
Checkout http://andromadus.flinny.org for links/files/changelog's
This a team/community effort, I'll not list everyone who has helped along the way here that list is in the beta thread but I will say thanks to all of them again and obviously anyone that has been missed.
Current Build Changelog
Build 16
Rom
Should have fixed the zoom problem with browser some were having with large fingers/thumb presses.
Notification LED should be green again.
Disabled sliding picture animation when taking a picture for now.
Saga, rotation issue should be resolved again.
Everything else synced with CM.
Kernel
Patched to 3.0.66
Saga - S2W should be disabled by default on a clean install
Increased PMEM allocation on both SAGA and VISION as we were having out of PMEM issues sometimes when coming out of standby.
MDDI - sorry still need an updated kernel for you.
Checkout http://andromadus.flinny.org for previous changelogs
So you finally splitted everything up
Tapatalked from Desire S running Andromadus
When can we expect your next 4.2 build?
EDIT: unofficial link build 6
gapps
As said files are uploading both for AOSP AND CM 10.1
The first CM 10.1 build and everything works
Tapatalked from Desire S running Andromadus
suku_patel_22 said:
As said files are uploading both for AOSP AND CM 10.1
The first CM 10.1 build and everything works
Tapatalked from Desire S running Andromadus
Click to expand...
Click to collapse
What you already got your hands on cm10.1 cool
still a noob
niravnn said:
What you already got your hands on cm10.1 cool
still a noob
Click to expand...
Click to collapse
http://andromadus.flinny.org/?q=cm10_1
Except the lockscreen shortcuts/options that are gone (for now)... DAMN!
Camera (including front face camera), GPS, wifi, sensors, sound, ... WORKING!
Stop reading and install this **** !
Great work! Flinny!
can't wait to have a try!
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
the camera seems to have a green line on the left, can anyone else confirm that ?
lhn1989 said:
Great work! Flinny!
can't wait to have a try!
---------- Post added at 06:23 AM ---------- Previous post was at 06:21 AM ----------
the camera seems to have a green line on the left, can anyone else confirm that ?
Click to expand...
Click to collapse
Ah that old bug.... I will nuke it for the next build.
Sent from my Nexus 7 using Tapatalk 2
Flinny said:
Ah that old bug.... I will nuke it for the next build.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
All I have to say is WOW, best ROM ever! Thanks, only bug I get is that camera one
Flinny said:
Ah that old bug.... I will nuke it for the next build.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
+1 for a fast release!
Thanks flinny!
Just installed this rom over AOSP 4.2 v3 with cache&dalvik wipe.
Lockscreen widgets are now not oversized, that's good.:good:
The bug I have is with the AOSP keyboard, it doesn't show up (black screen instead, see the screenshot) and then FCs. Tried clearing data and cache, but it didn't work.
giant_karlik said:
Just installed this rom over AOSP 4.2 v3 with cache&dalvik wipe.
Lockscreen widgets are now not oversized, that's good.:good:
The bug I have is with the AOSP keyboard, it doesn't show up (black screen instead, see the screenshot) and then FCs. Tried clearing data and cache, but it didn't work.
Click to expand...
Click to collapse
Flinny already has said in the OP that he will only count as a bug when we have it in clean install. Make nandroid than clean install if it's there than its a bug
still a noob
niravnn said:
Flinny already has said in the OP that he will only count as a bug when we have it in clean install. Make nandroid than clean install if it's there than its a bug
still a noob
Click to expand...
Click to collapse
ah! sorry, didn't read the OP, rushed to download and test the CM10.1 =)
I've tried another JB keyboard from the forum and it works!:victory:
giant_karlik said:
ah! sorry, didn't read the OP, rushed to download and test the CM10.1 =)
I've tried another JB keyboard from the forum and it works!:victory:
Click to expand...
Click to collapse
Clean installed here and both the AOSP and Swiftkey 3 keyboards show up! I realy can't believe how great and stable CM10.1 already is for our Desire S!
sammyke007 said:
Clean installed here and both the AOSP and Swiftkey 3 keyboards show up! I realy can't believe how great and stable CM10.1 already is for our Desire S!
Click to expand...
Click to collapse
yes, it's amazing!
thanx for the info about clean install, I think I'll do it later today. Just have no time for reinstalling and restoring stuff now.
sorry... post to wrong forum~
Try clicking build 10 times in about phone...I guess it should work
Strange Android
vampire36 said:
Try clicking build 10 times in about phone...I guess it should work
Strange Android
Click to expand...
Click to collapse
no guess... it works...
Q&A for [ROM][OFFICIAL][KitKat 4.4.4][Ville] PAC-ROM 4.4.4.RC-2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
atrus5 said:
New build is up. Just some minor changes and fixes to the build. Here is the link. https://s.basketbuild.com/dl/devs?dl=pacman/ville/dev/pac_ville_4.4.4.RC-2_20141019-003708.zip
Click to expand...
Click to collapse
Bluetooth is really broken for me.
Pilipin said:
Bluetooth is really broken for me.
Click to expand...
Click to collapse
Can you send a logcat of what happens when you use Bluetooth
@atrus5 Have you added a custom kernel yet? If not, i'm working on one with @javelinanddart and possibly @AKToronto, but I'd need help compiling it. It always fails for me.
josepha19223 said:
@atrus5 Have you added a custom kernel yet? If not, i'm working on one with @javelinanddart and possibly @AKToronto, but I'd need help compiling it. It always fails for me.
Click to expand...
Click to collapse
I don't add custom kernels to the build. I guess I could but I feel the user can add whatever they want afterwards instead of having one built in. I am not the best person to ask for building a kernel as I don't do that kind of thing. I just like building the roms and testing them.
atrus5 said:
I don't add custom kernels to the build. I guess I could but I feel the user can add whatever they want afterwards instead of having one built in. I am not the best person to ask for building a kernel as I don't do that kind of thing. I just like building the roms and testing them.
Click to expand...
Click to collapse
Well let me know if you want to. you did add a poll so i was just wondering
josepha19223 said:
Well let me know if you want to. you did add a poll so i was just wondering
Click to expand...
Click to collapse
Yeah sorry that poll was from the very beginning of the thread and I can't get rid of it
hello got error flashing Lates PacMan build 4.4.4 pac_ville_KK.RC-3.dev_20141129-123111
E:Error executing updater binary in zip
Click to expand...
Click to collapse
Hboot 2.15, S-off, radio 1.11, TTWRP 2.5.0.0
pls help
upd. Flashing TTWRP 2.8 - fixed problem. Sry for diturbing
BorHblK said:
hello got error flashing Lates PacMan build 4.4.4 pac_ville_KK.RC-3.dev_20141129-123111
Hboot 2.15, S-off, radio 1.11, TTWRP 2.5.0.0
pls help
upd. Flashing TTWRP 2.8 - fixed problem. Sry for diturbing
Click to expand...
Click to collapse
yeah i was gonna say just update your recovery but you got it
Calling out gives blank screen
Hey - new to the forum here, and I know this rom is discontinued for the ville, but perhaps someone can point me in the right direction;
When I want to place a call, the screen goes blank. The call itself is being made, but I cannot get the screen to work again. Even after the call disconnects. Only way, is to lock screen with power button (still blank) and press power button again to go to unlock screen.
This problem is also for incoming calls only after picking up the phone.
This is what I did to the phone so far:
- Unlock bootloader via HTC site
- Root phone
- Install TWRP
- Flash PACROM , PA GApps, Update-SuperSU, flash boot.img in fastboot
My setup:
HTC One S S4
HBOOT 2.15
Radio: 1.11.50.05.28_10.27.50.08L
Kernel: 3.4.82
ROM: pac_ville 4.4.4 20141231
S-ON
TWRP: 2.8.6.4
SuperSU 2.46
I have looked around in the threads here but seems no-one else is having this problem.
Can you try to use a different gapps. Pa adds info to there gapps. Use the gapps from the op.
Actally it was the proximity sensor that was giving issues, I used a calibration app to set it manually and since have been using Pacman happily. God it would be great to see a LP PACMAN for the Ville
krillin2112 said:
Actally it was the proximity sensor that was giving issues, I used a calibration app to set it manually and since have been using Pacman happily. God it would be great to see a LP PACMAN for the Ville
Click to expand...
Click to collapse
Glad you found the problem and fixed it.
It won't be me making the build. If anyone else wants to that would be great.
Sent from my Nexus 5 using XDA Forums
Yeah I read you no longer have a working Ville. I really do like the ROM and maybe one day someone can make a LP build. There is one for the HTC One (m7 & m8). Don't know how much work it would entail to adapt that to Ville.
Q&A for CM12 Lollipop - unofficial 0.1 FULL OF BUGS
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for CM12 Lollipop - unofficial 0.1 FULL OF BUGS. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Awesome
l.m.prowse said:
Ones just finished being built downloading now
Click to expand...
Click to collapse
Looking forward to trying them out.
Nightly CM12 for Asus tf300t
I am not able to use wifi channel 13 with CM12. It was working fine with CM11.
Tried to change build.prop but no go.
Anyone??
Just verified this on ME301T and no luck.
Install was fine, at reboot it starts compiling all apps
Lock-screen appears and a pointer (circle? for docked with trackpad?)
Sudden reboot
Lock-screen etc
I don't know why but i think this ROM is slower then the Katsiss ROM.
Have you'v got any idea?
F2FS
HI,
i would like to try the F2FS support, but i dont know how to format ?
Maybe someone can tell me the command for adb.
ty
Dear XDA friends I request help , I upgraded my TF300 from CM11 to CM12 , now the tablet is reading UNROOTED none of my rooted apps work. I ran root checker and it comes back with this device is not rooted, I also ran busybox and busybox app says the device is not rooted. Can anyone help me fix this issue. Thank you.
Is dock battery and its buttons are working with latest nightly?
And anyone knows if there is possibility to have separate tabs for notifications and toggles on both sides of screen like on kitkat?
Sent using tf300t - PAC-man/KatKernel (DualBoot)
wilspeak said:
Dear XDA friends I request help , I upgraded my TF300 from CM11 to CM12 , now the tablet is reading UNROOTED none of my rooted apps work. I ran root checker and it comes back with this device is not rooted, I also ran busybox and busybox app says the device is not rooted. Can anyone help me fix this issue. Thank you.
Click to expand...
Click to collapse
Normally SU is added by default but not enabled by default.
1. Goto Settings=>info
2. Make yourself developer by tapping 7 times on build info
3. Goto Dev options => root access to apps and system.
4. reboot
If that won't work you have to zipflash superSU in recovery: http://download.chainfire.eu/supersu
ch3mn3y said:
Is dock battery and its buttons are working with latest nightly?
And anyone knows if there is possibility to have separate tabs for notifications and toggles on both sides of screen like on kitkat?
Sent using tf300t - PAC-man/KatKernel (DualBoot)
Click to expand...
Click to collapse
Try KatKiss, much better and all Asus features work:
http://forum.xda-developers.com/transformer-tf300t/development/rom-t2932783
What about themes? Coz i dont like stock one.
And it could be even better as i will stay,with katkiss dualboot kernel for 5.0
Sent using C6833 - AICP/GreatDevs
F2FS
Hallo.
I have KatKiss-Lollipop on my TF300TG and i want to try CM12. I have TWRP 2.8.4.0 and F2FS. Can i flash CM12 or i need to change F2FS to EXT4?
Carlosk1966 said:
Hallo.
I have KatKiss-Lollipop on my TF300TG and i want to try CM12. I have TWRP 2.8.4.0 and F2FS. Can i flash CM12 or i need to change F2FS to EXT4?
Click to expand...
Click to collapse
If your data partition is all that you have formatted as F2FS, then all you need is an F2FS compatible kernel (katkernel or grimlock) and you should be able to run any ROM.
shawnbrennan55 said:
If your data partition is all that you have formatted as F2FS, then all you need is an F2FS compatible kernel (katkernel or grimlock) and you should be able to run any ROM.
Click to expand...
Click to collapse
Thanks. I will try to see how it work.
Carlosk1966 said:
Thanks. I will try to see how it work.
Click to expand...
Click to collapse
It works, but i go back to Katkiss, because is smoother and run much faster.
cm12 tf300t constantly rebooting
Hi,
I installed the CM12 and its great, however sometimes the tablet start to reboot by itself over and over again. Anyone can help me?
I also have some authentication problems with my router. Anyone else have this kind of problem?
Thank you.
thank you very much
TF300t CM 12.1 Wifi Issues
I'm still experiencing WIFI issues on both nightlies for CM 12.1 . I'm also experiencing print spooler errors anytime i try to print. I upgraded from CM 12 -> CM 12.1 -> CM 12.1 using TWRP recovery 2.8.6. I have also needed to reinstall the GAPPS 5.1 each time installed 12.1 (including going from 12.1 -> 12.1). Other than that it seems to be working pretty well. Please let me know if i can submit any logs to help fix some of these bugs.
dock
Is dock fully functional?
what about battery status?
Hope they can develop until a stable release
[Q&A] ★☆★[ROM] [ALPHA] One+ VM12 v1.0.0|LRX22G & VM12.1 [LMY47D] |
Q&A for ★☆★[ROM] [ALPHA] One+ VM12 v1.0.0|LRX22G & VM12.1 [LMY47D] |★☆★
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for ★☆★[ROM] [ALPHA] One+ VM12 v1.0.0|LRX22G & VM12.1 [LMY47D] |★☆★. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
störte said:
On my phone density dies not change. Tried build in and also external APP. Even changing buildprop manually dont work.
It was dirty flash
Send by Hyperdrive on one+One
Click to expand...
Click to collapse
vinman12 said:
Worked here, do u have super su installed and up to date binarys
Click to expand...
Click to collapse
Density doesn't work for me too, clean flash and I have Super Su
Novacane7 said:
Density doesn't work for me too, clean flash and I have Super Su
Click to expand...
Click to collapse
We just implemented that today and are working hard to get it and our other list of mods ported over.
titanium backup / OT
netcitizen said:
tibu won't work without root . or is there any specific setting in tibu for gapps ? they are tiny but while flashing ROMs frequently it is a pain to install from play store.
Click to expand...
Click to collapse
Are you flashing tibu in recovery? Launch Tibu, go to menu and create 'update.zip' and be sure to create it as a system application. Reboot and flash the zip. You need a pro key
damage98 said:
Are you flashing tibu in recovery? Launch Tibu, go to menu and create 'update.zip' and be sure to create it as a system application. Reboot and flash the zip. You need a pro key
Click to expand...
Click to collapse
I flash tibu like this only. I was talking about restoring gmail, hangouts , google calendar,maps using tibu since these apps are not in the 5.1 gapps package.
Thanks
This is a solid build very satisfied with the way that you have done this......
Thanks to all the developers.....
Great ROM working perfectly . thanks and congratulations
---------- Post added at 07:24 PM ---------- Previous post was at 07:17 PM ----------
Can we expect a new build for today
??
Totally fantastic rom! Going to try it out and report. Thank you so very much!
Sent from my A0001 using XDA Premium HD app
Asserts error during the flashing your rom, any suggestions how can I flash without this errors?
dirty flash over previous and playstore app can't connect to server.
Same issue with camera-mod here here. But not even a reboot helped. Can't start the camera app anymore.
I started stock-camera and switched between front and back - no problems. But the camera-mod keeps telling me that it was stopped, every time I try to start it.
camera-mod bug in vm12.1
now I re-flashed the camera-mod and it still doesn't work
so I got back to Open Camera and I love it
quick boot
When i enabled quick boot mode in developer settings.. BOOM!!! The os crashed.. followed by bootloop.. Then i again.. Clean installed the rom. Other than that no problem. Its a very stable rom and that too for a rom in alpha stage.. Its unbelievable.. !! Good work guys!!
kalali said:
dirty flash over previous and playstore app can't connect to server.
Click to expand...
Click to collapse
You should flash the gapps again.
Im willing to try out this ROM and experience 5.1 improvements. What are things that I should look out for before flashing? Are calling, texts, camera. etc working. Is it stable *enough*
Hey i got one question
I tried flashing the rom for severak hours, but I always get this error.
E:Cannot execute binary file.
I tried dirty flash, full wipe, even flashing from a clean install of CM11.
Can anybody help me?
download link dead
hey, just wanna say your link for OPO team nocturnal rom is dead
Awesome Work!
Hats off to Team Nocturnal for an an amazing piece of work. Can't thank you enough
Everything seems to be working flawlessly on built VM12.1 - 20150410 (radio, BT, GPS, sensors, etc) and I'm already into one week of flashing this rom. No lags or FCs whatsoever. I must admit, since first introduced to custom rom flashing, I've become
somewhat a flash junkie. Sometimes, switching roms on daily basis but this rom has given me no excuse.
Just one question though. Is, 6xxmb ram usage (with only basic system apps running) considered as memory leak?
I understand it's a common issue when running Lollipop.
Thanks again guys. Looking forward to future updates. (This is already perfect but I can't help it -Never Settle!)
Missing Appops
Hi. Thanks for the ROM. Are loving it, and at very impressed. I am missing Appops though. Hand I not done something? I flashed clean, then Gaps, then SU. Using the 15th April build.
Modem
Hi,
I had an issue of not receiving texts/sms/phone calls ON wifi.
I had this issue with Temasek's build and then switched to Nocturnals and the ROM still had this issue. I ended up going over to Blisspop's thread and using a modem alpha build they listed and this fixed the issue. Just FYI because I never had a funky issue with modem's or not receiving text/phone calls on wifi. Everyone else worked fine while off of wifi.
Other than that, I've played around with the ROM and it truly is a great experience with smoothness, now I'll be checking out that battery life!
Thanks team.
Q&A for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][ALPHA][LP 5.1]CyanogenMod 12.1 Kernel with DoubleTap2Wake. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Bootloop after flashing. Help!
Need some help. I have installed this kernel on CM 12.1 Rohan's build and got bootloop... Some info: I used Philz Touch 6 Fota and wiped cache and dalvic after flash. I recovered from soft brick through but what should I do to avoid bootloop?
File
Sorry for the dumb question but what is zip dl-0? cant flash it, it wont detect it.
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
cascabel said:
Good day. First off, i wanted to say that i've tried this kernel and the d2w is very helpful for preserving the hw power button and i think this kernel is very useful.
The thing is, since their latest releases, i've found that Glade Rom and SlimLP have been the roms that are best for me in terms of what i need and my daily usage. Unfortunately, this kernel doesn't work for either of them. I'm guessing it's because of their base?
Anyway, i'd like to ask if the dev has any plans to get this kernel working for either of those roms or for aosp 5.1.1 roms in general? If yes, that would be awesome. If not, then i still say this kernel's features are still very helpful and i'll be waiting to get a cm-based rom that works for my needs. ?
Click to expand...
Click to collapse
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
corphish said:
Doesn't work in the sense?
I have plans to bring this to every LP based ROM for XL.
I guess there might be some kernel related change. I will see to it.
Click to expand...
Click to collapse
bootloops. even through a clean install or flashing it after an install and clearing dalvik and cache...
i've noticed that the roms that doesn't work with tz 4.15 won't work with this kernel either.
great to hear your plans. really appreciate it.
edit:
both these roms are aosp based and have RRO supported as opposed to cm theme engine. could that have any bearing on it? let me know how i can help.
Problem on my HTC One (M7)
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
usb619 said:
Hello,
first of all I would like to apologize for my English problems. I installed your Kernel on my HTC ONE M7. It is running on Cyanogenmod 12.1 (Android 5.1.1). The problem is that my handy freezes everytime it tries to boot. It freezes on the HTC logo to be more specific. Please let me know if you need to know more details or need even a log and I hope this issue gets solved.
Thank you
Click to expand...
Click to collapse
LOL No, this kernel is not meant for HTC One.
This kernel is only for Sony Xperia L. Please read the full post before trying anything.
Now how to recover? If you are able to go in recovery, flash CM12 or any custom ROM.
Master Solution is flashing stock as always, although I dont know how things are done for HTC [emoji14]
@corphish i kniw i shouldn't but.. If it's possible, may i ask that you add the Intelliactive scheduler if you can? Lulzactive and on demand doesn't really work for me (lulzactive seemed buggy last time i tried it - main core stayed on max freq). Just a request. ?
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
primemonitor said:
Wifi stopped working after I flashed this kernel. Previously I was on Tz 4.16. Any ideas what I can do fix this, other than going back to Tz?
Click to expand...
Click to collapse
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
corphish said:
Well, you cannot go back to TZ now. It flashes kernel in boot-device linked partition, which is a mystery partition about which only Varun knows.
I haven't succeeded in your situation.
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Right, learned that the hard way
Is this a known issue though, or something that you or others have previously faced, that changing from Tz to Zapdos will break wifi? Just curious.
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
illague said:
Hey man, I use Primexperia rom, it's CM12 based, soon to be posted new ver CM12.1 based. For some reasons it's not compatible with TZ 4.16, 4.14 only (wi fi missing on 4.16) Will this kernel work for me? The only thing I really need is a stable system with Sony sound
Oh almost forgot, I use TWRP and I think that any other recovery is a waste of time, to be honest. Can I use TWRP?
Click to expand...
Click to collapse
I tried, breaks network .
Sent from my C2104 using Tapatalk
corphish said:
I tried, breaks network .
Sent from my C2104 using Tapatalk
Click to expand...
Click to collapse
Stryder modded the rom while he had TZ installed ... I dont get why but thats it... Flash TZ4.15 and then TZ4.16
Sent from my Xperia T using XDA Free mobile app
Stryflex LP 1.5 Rom
Hi,
I am using Stryflex LP 1.5 Rom.
When used the its kernel,phone freezes randomly & hangs & not responds.
We have to take out battery & restart phone.
Most of the times even if i take out from pocket also it is in DeadState(even if pressed power button alos nothing works.)
So i installed Thunderzap 4.16 ,it is not freezing but Wifi is not working.
Then i shifted to your kernel, thank god it is not at all freezing while operating .
But i noticed that it is going to black screen/Dead State very frequently.
Waiting for any suggestions & help.
I appreciate your help & time.
Could we get 1.7~ OC like in TZ kernel? It was fully stable for me even with thermal throttling disabled.
Maybe it's noob but would the wake up signatures Hurt the touchscreen some how.
I mean it well make it work for 24 hour????
Tz 4.16 with cm 12 work properly and Wi-Fi is goog and with application tenderzap control you can Cheng setting so good and you can change control charge to 2100 ma for faster charging so download tanderzap control.apk
Sent from my C2105 using Tapatalk
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
After installing rom should install tanderzap.zip with via recovery for resolve Wi-Fi problem
Sent from my C2105 using Tapatalk