Hello. I need a little help with Tasker, I've used it for 3 days and I love it but I can't figure out something. So I made 2 profiles, first one is when I turn ON Bluetooth and my Bluetooth headphones are ON also, phone connects to headphones, turns ON mobile data and opens Spotify app,that works good. The second profile is when I turn off the headphones, the Bluetooth and mobile data turns off also, this also works perfect but the problem is that if both profiles are ON in Tasker at the same time and if I try to turn ON Bluetooth, Bluetooth just turns ON for 2 seconds and then automatically turns off,so I can't turn ON Bluetooth with both profiles active, I need to turn off the profile that disconnects Bluetooth and mobile data. What can I do? Sorry for my English Thanks!
Make the second profile your exit task
Open tasker go to profiles, touch your connect profile and hold the name behind the green arrow.
A menu will pop up and you can choose "add exit task".
There you add the tasks that you want it to do when you disconnect
Sent from my OnePlus One using XDA mobile app
Related
I have an HTC Titan running WM 6.1 (with nueExtROM), but had this problem with Sprint ROM as well.
I use the HTC Home Plugin with the Normal sound profile. However, when my phone is idle for a long time it will switch to vibration mode automatically. This is really annoying because I'll miss calls when the phone's on the charger in another room. If I switch back to the sound profile tab, Normal is still selected. How do I prevent my phone from going into vibration mode automatically?
Also, what does the Automatic sound profile do?
Hello,
is there a program, that can enable or disable the ringer/speaker automatically?
Example: I want, that the telephone doesn't make a sound between 22 o'clock in the evening and 7 o'clock in the morning.
Thanks!
schnurzelat
MortPlayer
MortPlayer for the PocketPC is one program that can turn the volume back on using alarm, so you can silence the phone entirely and it will then turn back on when an alarm goes off, if that option is chosen in settings.
Spb Phone Suite
has a Today plug-in that will allow you to set up rules for how your phone behaves that can be time based, or triggered by events in Outlook calendar. You can set it to turn your BT or WiFi on or off automatically, as well as setting the ring. Not free, but very useful.
phoneAlarm can do this, and a lot more...but not freeware.
Thanks! I'll give it a look.
Greets schnurzelat
Ok, I have set up my phone using the headset button app that opens up voice control when I double tap the middle button on my headset. What I wanted to do was make calls from it, however it doesn't seem possible, either because teh background noise when walking causes the phone to constantly listen and not cut off, or it doesn't connect to the server to recognise what I am saying
Is there an app that works well with voice control over a headdset?
I've recently downloaded Llama and am amazed that this app is free! I've set up the basics (turn on/off Wi-Fi when I enter/leave home/work, go on vibrate at work, etc.), but do you gents/ladies have any personal suggestions or tips on events I can set up to grease the wheels of my day-to-day grind?
Llama is a must have free app if you don't already use the paid app Tasker. Using cell towers as a battery-free location service is a great idea and more apps are starting to use that now.
My favorite uses for Llama are saving battery by toggling auto sync and fixing a pet peeve of mine: plugging in headphones and not realizing the volume is too loud. Second one is a bit tricky and needs to work in conjunction with the Sound Profiles you've already set up for Day/Night etc.Lastly, you can also use it as an easy way to change the brightness automatically throughout the day.
ex.
Auto-Sync
-When using Battery, Disable Account Sync
-When Charging, Enable Account Sync
Volume Control
-When any wired headset is connected - Change Profile to Headphones
-At Home between (Set Time){when wired headset is disconnected} Change Profile to Normal
-At Home between (Set Time){when wired headset is disconnected} Change Profile to Quiet
Am I the only one with the current bug that allows calls through even when I'm in silent mode? If it works for you what version of llama are you on?
haxrnick said:
Am I the only one with the current bug that allows calls through even when I'm in silent mode? If it works for you what version of llama are you on?
Click to expand...
Click to collapse
Latest version and no such issue. There is the option to set certain contacts as "Noisy" and they will ring anyways even when silent.
Edit your Silent profile and make sure your ringtone and notification volume is set to 0.
some aids i use:
temp mute phone when using camera
start music when headset connect
kill musicplayer when headset disconnect
silent at work
only wifi at home
no problems with calls on silent
Hello,
I have a Galaxy S5 running CM12.1 and I am having a couple of issues using Tasker to control volume levels.
I have four profiles set up called Home, Out, Night and Work. Home is active when connected to my home WIFI network, Night is active when connected a power source between the hours 11-7, Out is active at all other times except between the hours of 9-5 Monday to Friday when Work is active.
The tasks in these profiles (among other things) change the phone volume levels.
The first issue is, when a headset is connected, the media volume always returns to the volume it was last time the headset was connected. It doesn't matter if you manually change the volume before connecting the headset or run the task to set the volume, it always returns to its previous volume. if you check the volume sliders to make sure they are correct before you connect, then you can see it jump back up again on connection.
The second is, I cannot set notification and ringtone volumes independently (Settings, Sound, 'Link Ringtone & Notification Volume' is unchecked). If ringtone is set to 6 and notification to 0, then notification stays at 6. If ringtone is set to 0 and notification to 6 then notification is muted.
Any suggestions welcome.
Thanks
caned_monkey said:
Hello,
I have a Galaxy S5 running CM12.1 and I am having a couple of issues using Tasker to control volume levels.
I have four profiles set up called Home, Out, Night and Work. Home is active when connected to my home WIFI network, Night is active when connected a power source between the hours 11-7, Out is active at all other times except between the hours of 9-5 Monday to Friday when Work is active.
The tasks in these profiles (among other things) change the phone volume levels.
The first issue is, when a headset is connected, the media volume always returns to the volume it was last time the headset was connected. It doesn't matter if you manually change the volume before connecting the headset or run the task to set the volume, it always returns to its previous volume. if you check the volume sliders to make sure they are correct before you connect, then you can see it jump back up again on connection.
The second is, I cannot set notification and ringtone volumes independently (Settings, Sound, 'Link Ringtone & Notification Volume' is unchecked). If ringtone is set to 6 and notification to 0, then notification stays at 6. If ringtone is set to 0 and notification to 6 then notification is muted.
Any suggestions welcome.
Thanks
Click to expand...
Click to collapse
The volume returning to the previous level when you connect headphones is probably a setting in your media player or if you're using a sound mod such as Viper4Android then it might be in its settings.
As for the independent volumes, that is probably a ROM issue, the developer would have to fix it in his ROM, let them know of this issue by posting in their ROM thread or by sending them a PM.
Sent from my SM-S903VL using Tapatalk
caned_monkey said:
Hello,
I have a Galaxy S5 running CM12.1 and I am having a couple of issues using Tasker to control volume levels.
I have four profiles set up called Home, Out, Night and Work. Home is active when connected to my home WIFI network, Night is active when connected a power source between the hours 11-7, Out is active at all other times except between the hours of 9-5 Monday to Friday when Work is active.
The tasks in these profiles (among other things) change the phone volume levels.
The first issue is, when a headset is connected, the media volume always returns to the volume it was last time the headset was connected. It doesn't matter if you manually change the volume before connecting the headset or run the task to set the volume, it always returns to its previous volume. if you check the volume sliders to make sure they are correct before you connect, then you can see it jump back up again on connection.
The second is, I cannot set notification and ringtone volumes independently (Settings, Sound, 'Link Ringtone & Notification Volume' is unchecked). If ringtone is set to 6 and notification to 0, then notification stays at 6. If ringtone is set to 0 and notification to 6 then notification is muted.
Any suggestions welcome.
Thanks
Click to expand...
Click to collapse
Your media volume control is divided into the headset volume, and the loudspeaker volume. And they're not synchronized. So each will be set independently whenever you adjust them.
Your "media" volume depends on which of the outputs you're using at that particular time (Loudspeaker vs Headset) when the profile is triggered.
So the headset volume will always remain unchanged/unaffected by the tasker profile (unless the headphones are plugged in when you run the profile)
Unless there's a way you can have tasker explicitly identify and target the headset volume and the loudspeaker volume separately, then I don't think there's a fix for that particular issue.
I'm not sure about your second issue though. The first part seems to be a bug, but the second part is working as intended. Once your ringtone is set to 0 then your phone automatically goes to vibrate or DND/Silent. Which means no notifications