my samsung wave 8500 does not open the download mode when I press the key sequence only shows a message "file not found" I need your help please
Related
What is This Guide:
This guide will give you the complete and easy steps to follow when you want to update the firmware version of your Samsung Galaxy Star Duos S5282, The main goal of this guide is to update your Galaxy Star Duos by yourself and by using Free tools and files only, No need to buy or pay for anything at all, We bring you everything you need to perform the update so all you should do is reading the guide and start working.
Important Steps:
- Backup any wanted data before starting the update process, Read our online guide (How to Backup your Samsung Mobile Phone).
- Charge your mobile phone to be at least at 70% of its charging level.
- Write down the current firmware version of your mobile phone, You may need it in case of anything happen during the update process.
Tools, Files and programs:
- Stock official firmware of Samsung S5282 Galaxy Star Duos (Download and extract the package).
- USB drivers for your S5282 ( Download and install it, Then restart the computer).
- Odin flasher (Download and extract).
- Suitable USB cable for Samsung S5282 Galaxy Star Duos.
- A computer with Windows OS installed.
Samsung S5282 Galaxy Star Duos Firmware Update Steps:
- Turn off the phone.
- Take out any SIM cards or memory card of it.
- Run Odin.exe program.
- Check the following settings: Auto Reboot, F.Reset Time, Nand Erase all.
- Click Bootloader button and select: BOOTSPL_S5282xxxxxx_..._REV03_user_low_ship.tar
- Click PDA button and select: CODE_S5282xxxxxx_1127854_REV03_user_low_ship.tar
- Click PHONE button and select: MODEM_S5282xxxxx_REV03.tar
- Click CSC button and select: CSC_Oxx_S5282Oxxxxxx_1127854_REV03_user_low_ship.tar
(In-case you'd like to re-partition, check "re-partition" and select the mint.pit file)
- Put your Samsung S5282 Galaxy Star Duos device into Download Mode:
Press and Hold Volume Down key + Home key + Power key, When you see the warning message release all keys, And press Volume Up key to enter the phone into Download Mode.
- Connect the device to your PC using the USB cable.
- Wait for Windows to install the needed USB drivers.
- Look at Odin's window and check if the COM port of your device is detected (0:[COMxxx]).
- Click on Start button.
- Odin will install the new firmware files into your Galaxy Star Duos, Just wait for it to be done.
- The device will be rebooted after installing the new firmware.
- Look at Odin's window and if you see PASS! Word then the update was successful.
- Disconnect the USB cable from phone.
- Wait for the device to be fully on and check the new firmware version bu this code *#1234#
- Now you can turn the mobile off, Insert SIM Cards, Memory card, Then turn it on again.
- When the device is on again you are free to customize it and restore your backup (In case you have made one), Then enjoy your perfect work.
IMPORTANTNotice: When you have a firmware package with one file inside, Then no need to check Re-Partition option, And never use PIT file too, All you should do is selecting the one file as PDA file, and perform the other explained steps.
Boot loop occurs
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...
subinkoovery said:
Can you give me the link ???,I goolged always getting.. a sigle flashable file. When i flash with that, always boot loop occurs..
Any advise pls...
Click to expand...
Click to collapse
Use single one in pda download from samsung-updates.com
Sent from my Micromax A58 using XDA Free mobile app
Please Help Me
After installing stock rom in galaxy star (GT-S5282) , I got something on my screen showing some details like pda, etc (picture attached with this post). and it is staying forever. Also when i long press power button, it is directly sutting down without showing any menu. screen is not locking.And also showing internal memory as 0. When I try to install any custom rom, device is going into boot loop. PLEASE HELP ME!!!
Yes same here please help my friends wanna need my help
help pls problem with root on p6200
when i was root by this way i have issue
1) Install USB driver for Samsung Galaxy Tab 7.0 Plus to transfer files between the Android device and computer.
2) Enable USB Debugging Mode on the tablet to connect the Android device with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) As the tutorial might wipe all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.
4) The device should have above 80 per cent of battery charge.
5) The Galaxy tablet should be factory unlocked and not locked to a particular carrier.
6) The tablet will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the device later.
7) The recovery file and the Superuser file work only on the Samsung Galaxy Tab 7.0 Plus P6200. Applying these on any incorrect variant might brick the device. Therefore, verify the model number of the Galaxy device by selecting Settings>> About device>> Model number.
Steps to root Samsung Galaxy Tab 7.0 Plus GT-P6200 on Android 4.1.2 Jelly Bean and Install CWM Recovery
Step-1: Download CWM recovery file for Samsung Galaxy Tab 7.0 Plus to the computer
File name: GT-P6200-Recovery-tar.md5
Step-2: Download CWM flashable SuperUser zip. Copy it to the SD card of the tablet
File name: Superuser-3.1.3-arm-signed.zip
Step-3: Download Odin 3.07 and extract the downloaded zip to the computer
Step-4: Switch off the Galaxy tablet and boot it into Download Mode by pressing and holding Volume Down and Power buttons together
Step-5: Launch Odin on the computer
Step-6: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the tablet. When the tablet is connected successfully, the ID: COM will turn yellow with COM port number. Also, an Added message will appear in Odin indicating successful connection
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If that too does not work then re-install USB driver.
Step-7: In Odin, click the PDA button and select GT-P6200-recovery.tar.md5 file
Step-8: Verify the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck the Re-Partition option
Step-9: Finally click the Start button in Odin to begin the installation process which would take few minutes to complete. Once the installation process is completed, a PASS message will appear under Odin indicating successful installation. The tablet will then reboot automatically
Step-10: Once the tablet boots up, turn it off. Then boot the device into recovery mode by pressing and holding Volume Up and Power buttons together
Note: In recovery mode, use the Volume keys to scroll between options and use Power button to select the desired option.
Step-11: In recovery mode, scroll down to and select install zip from sdcard then select choose zip from sdcard. Now navigate to the Superuser-3.1.3-arm-signed.zip file which was earlier copied to the SD card of the tablet
Step-12: Select it using the Power button and confirm installation by selecting Yes on the next screen
Step-13: Once the installation process is completed, return to the main recovery menu and reboot the tablet by selecting reboot system now
Samsung Galaxy Tab 7.0 Plus should be now rooted successfully on Android 4.1.2 Jelly Bean with ClockworkMod recovery installed. To verify the root, open the app drawer of the tablet and look for an app called SuperSU from the list. Also, to ensure the root access, install Root Checker app from Google Play Store.
when select Superuser-3.1.3-arm-signed.zip says
e:failed to verify whole-file signature
e:failed to verify whole-file signature
e:signature verification failed
thats all
plz hlp me
Note: This guide is only applicable for lower end devices like Galaxy Mini, Fit, Ace & Suit
If you have bricked your phone you don't have to worry anymore, this method helps you to do a complete reset and unbrick your Phone.
This also helps if your phone is laggy and you want to revert back to Stock ROM.
What all you need??
→ Stock Firmware for your Phone (You can get it from www. sammobile.com/firmwares) - Remove Spaces
→ Samsung Drivers, if you don't have (You can download from http:// developer. samsung. com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows) - Remove Spaces
→ Odin MultiDownloader (Google this with Name & Model number of your phone)
→ OPS file (Google this with Name & Model number of your phone and download)
How to do??
→ First of all Install the Drivers if you don't have it installed in your Computer
→ Now Open Odin Multidownloader
→ Now you'll have to tick the check-boxes "One Package, Auto Reboot and Protect OPS"
→ Now at the right side you'll be able to select the files option. Click on OPS and select your OPS file by navigating into directory, similarly select One Package and select the md5 or md5.tar file (that's the firmware file)
→ That's it.. Now enter into the download mode in your phone, in most phones it is Turn Off your phone.. Hold "vol down+home+power" and leave when you see Samsung logo
→ Connect your phone to system via USB, you'll see your phone getting detected on Odin, your COM port will be shown
after your phone gets detected
→ That's it! You are done setting up Odin.. Click on Start and wait for few minutes, your phone will be flashed with stock Firmware
→ After it's done flashing the stock ROM, you'll see a successful message (Your yellow box gets blue and says "PASS" or Pop Up saying "Done")
→ Done! You'll have flashed the stock ROM or have unbricked your device! Now remember that you go to recovery mode and "Factory Reset" & "Clean Cache", You can enter recovery mode by holding "menu+power button" (on many devices)
See this post on my blog "www. androidpagez .tk/2013/11/how-to-unbrick-or-flash-stock-firmware .html" - Remove Spaces
paccha said:
How to do??
→ First of all Install the Drivers if you don't have it installed in your Computer
→ Now Open Odin Multidownloader
Click to expand...
Click to collapse
FYI not all Samsung phones can use Odin Multi downloader, the guide refers to
Odin version 4.38 is only meant for
Samsung Galaxy Mini S5570
Samsung Galaxy Fit S5670
Samsung Galaxy Suit S5670
Samsung Galaxy Ace S5830
and not all Samsung Phones uses ops. files
as such this guide is not for any but above models, please correct your Title
Check this out! Links to useful Guides and " Banned " Documentaries
xsenman said:
FYI not all Samsung phones can use Odin Multi downloader, the guide refers to
Odin version 4.38 is only meant for
Samsung Galaxy Mini S5570
Samsung Galaxy Fit S5670
Samsung Galaxy Suit S5670
Samsung Galaxy Ace S5830
and not all Samsung Phones uses ops. files
as such this guide is not for any but above models, please correct your Title
Check this out! Links to useful Guides and " Banned " Documentaries
Click to expand...
Click to collapse
Thanks for notifying.. I've changed the Title!!
Hi friends ,
There are lots of methods available on internet for Rooting s7262 but almost methods using outdated files and tricks which are no longer working .
Samsung released latest firmware 4.1.2 in the end of 2014 for Samsung Star Pro Duos s7262 .I am writing this post FOR ROOTING S7262 with the latest firmware 4.1.2 Installed and with the LAtest Files as on January 2015.
AIM: Rooting s7262 running latest firmware 4.1.2
Concept: We will first A :>Unlock Recovery then we will B:>FIX the WhiteScreen then we will finally C:> ROOT s7262 !
Things we will need:
(every files attached at the end of post and checked before uploading)
FILE 1: PDAboot.tar.md5.zip Location: PC
FILE 2: ODIN307.zip Location: PC
FILE 3 : Superuser.zip Location: SD CARD
CHECKLIST :
1- All files downloaded from this post
2-USB drivers Installed in PC
3-USB Debugging Mode is ON ( settings>>Developer option)
4- Screen Passwords/Pattern/PIN lock disabled
PLEASE NOTE: THis process will not cause DATA Loss but it is better to have BAckup before proceeding
Instructions:
STEP 1 :
a:Put Your phone in download Mode by pressing Volume Down +Home+Power key simultaneously.
b: Press Volume UP when Warning screen appears
STEP 2:
a: Extract ODIN307.ZIP and Run Odin 307.exe as Administrator (by right click > Run As> Administrator)
b: Extract PDAboot.tar.md5.zip you will get file PDAboot.tar.md5
c: Connect Phone with PC
d:Click on PDA select[COLOR="SeaGreen)"] PDAboot.tar.md5 [/COLOR]
e: Click START !!
f: You will see message PASS !!
You have Successfully Unlocked Recovery
STEP 3 : (only if you see WhiteScreen after flashing)
So now you see WhiteScreen after flashing??
Dont Panic Goto How to fix Whitescreen Errors on Samsung Star Pro Duos s7262 ?
STEP 4 :
You should automatically rebooted in CWM touch version .if not ,reboot into recovery by Pressing Volume Up+Down+Home+Power , or By ADB Commandline (See How?)
a: Select Install ZIp
b:from SD CARD
c: select Superuser.zip
d: INSTALL !!
Congratulations You just Rooted your Samsung Star Pro s7262
PRESS THANX if i helped you
if encountered any errors. Reply Here with full Error Message
my gt s7262 stuck at boot splash
p;z help me hurry
Hello, I have a problem with Smart Switch, I conected my phone and it showed that an firmware update was available so I proceeded to install it, however after the app downloads the update my phone just turns off and enter to download mode (everything normal) but in the installation process it doesn't install anything it just show 0% of the installation , after a few minutes and error message appears showing : "Failed to recognize software update mode" in my phone screen doesn't appear no error image, it just show the typical download mode image.
-My Baseband V. is G920VVRS4CQA3.
-Android 6.0.1
-Model. Obviously SM-G920V
Current version installed: at the attached files (Or da.png)
Message that appears before the error window. 2nd attached file (Or dadd.png)
Window showing the "notice". 3rd attached file (Or daddsw.png)
And a image from the download mode that it's on my screen (not mine). 4rth attachment (Or dae.png)
I hope that someone could help me. My many thanks in advance.