Changing boot animation - Sprint Samsung Galaxy S6 Edge

There is a thread in the Universal S6 Edge that has some bootanis but after following the instructions it's still not working for me.
Went into System/media and replaced the qmg files as per OP's instructions. However, I'm still getting the stock Samsung bootani. I noticed that in system/media there are lots of other QMG files with the term "boot" in them. I'm guessing one of these files has to be deleted or changed. Anyone have any thoughts?

The files for sprint boot animations are:
SPR_bootsamsung.qmg
and
SPR_bootsmsungloop.qmg
I would goto /system/media, rename the existing SPR_ files to something else, and then rename the bootsamsung.qmg and bootsamsungloop.qmg that were installed from what you downloaded from the other thread to the SPR_ filename.
Should work then.

What about the sound

SantinoInc said:
There is a thread in the Universal S6 Edge that has some bootanis but after following the instructions it's still not working for me.
Went into System/media and replaced the qmg files as per OP's instructions. However, I'm still getting the stock Samsung bootani. I noticed that in system/media there are lots of other QMG files with the term "boot" in them. I'm guessing one of these files has to be deleted or changed. Anyone have any thoughts?
Click to expand...
Click to collapse
I followed those instructions the other day and it worked for me
---------- Post added at 03:52 PM ---------- Previous post was at 03:51 PM ----------
ob1silvia said:
What about the sound
Click to expand...
Click to collapse
The sound is in system/media/audio/ui/poweron.ogg

When I change this add permission it still won't play

ob1silvia said:
When I change this add permission it still won't play
Click to expand...
Click to collapse
Did you replace the other one and reboot? What rom are you on?

Stock rom and yes reboot

ob1silvia said:
Stock rom and yes reboot
Click to expand...
Click to collapse
Maybe because you're stock and assuming not deodexed

This might work for you too if your comfortable moving some files around and making sure permissions are okay and such (doesn't seem to matter much anymore though)
READ HERE

Thanks fgr for the reply that's cool what u led me to but I have currently changed the animation but not the sound

This is the thread everyone is talking about:
http://forum.xda-developers.com/galaxy-s6-edge/themes-apps/custom-boot-animations-t3089208
And this is post from OP stating the right files to replace in our phones:
http://forum.xda-developers.com/showpost.php?p=60384372&postcount=28

Related

Sons of Anarchy boot w/ sound (Links Up)

Here is the boot animation and also the theme to the show.
Push the bootanimation.zip to system/media. Rename the existing file to bootanimation.zipold.
If you want the sound push the wav file to ect and rename existing file to PowerOn.wavold. I have only tried replacing existing files not sure if will work if you have no boot sound.
*DISCLAIMER* I am no way responsible for what you do to your device
Thanks to TXLunchbox for the bootanimation
http://dl.dropbox.com/u/64304416/bootanimation.zip
http://dl.dropbox.com/u/64304416/PowerOn.wav
Sorry for the delay on the links. Can't get the files loaded as attachments but the dropbox links are up and working!
Again use at your own risk and so far have only tested on ROM that had existing startup sound.
Glad to see you got it up nd running
Sent from my Maybach s 4g
ShadyAce80 said:
Here is the boot animation and also the theme to the show.
Push the bootanimation.zip to system/media. Rename the existing file to bootanimation.zipold.
If you want the sound push the wav file to ect and rename existing file to PowerOn.wavold. I have only tried replacing existing files not sure if will work if you have no boot sound.
*DISCLAIMER* I am no way responsible for what you do to your device
Thanks to TXLunchbox for the bootanimation
http://dl.dropbox.com/u/64304416/bootanimation.zip
http://dl.dropbox.com/u/64304416/PowerOn.wav
Click to expand...
Click to collapse
Good work man!
Tip: renaming the files to bootanimation.zipold should be bootanimation.zip.old, same with the poweron.wav file. Or you could rename it to .bak, that is how some of the various apps do it so the filesystem thinks it is a backup file. I think sdmaid will remove .old files when using it that is why I suggest using the .bak extension.
eollie said:
Good work man!
Tip: renaming the files to bootanimation.zipold should be bootanimation.zip.old, same with the poweron.wav file. Or you could rename it to .bak, that is how some of the various apps do it so the filesystem thinks it is a backup file. I think sdmaid will remove .old files when using it that is why I suggest using the .bak extension.
Click to expand...
Click to collapse
Thanks for the tip. Now to just learn how to create a complete theme that can be flashed.
ShadyAce80 said:
Thanks for the tip. Now to just learn how to create a complete theme that can be flashed.
Click to expand...
Click to collapse
Ill help you what are u stuck on
Sent From a Galaxy S with 4G
DnickDominic said:
Ill help you what are u stuck on
Sent From a Galaxy S with 4G
Click to expand...
Click to collapse
thanks. Right now I'm starting out at android.com figuring out the emulator and what not. Also looking for threads to show me how to take the boot animation and package it up for flash.
ShadyAce80 said:
thanks. Right now I'm starting out at android.com figuring out the emulator and what not. Also looking for threads to show me how to take the boot animation and package it up for flash.
Click to expand...
Click to collapse
Couple of things...
First, while I do appreciate the thanks, I was under the assumption you were going to add this to a full ROM you were working on and not just post it in another forum. If that was the case you could have just linked to my post that I did for this. The reason I never posted it in any other phone forums is that the resolution is set specifically for the Galaxy S Vibrant, therefore may have not looked as good on other devices.
Second, for the sound to work, it all depends on your kernel. I never did one for mine cause the majority of people that use the device I designed the bootanimation.zip for had VooDoo kernels and those do not support boot sound.
Third, if you're wanting to make it flashable you're going to have to learn the code for the recovery system you are using for the phone. I used to have a flashable version of mine, but when codes changed for CWM Recovery, I just figured it was easier to tell people where to push the file to.
Again, I do appreciate the thanks, but next time be a little clearer on what you're doing with someone else's work before posting it as your own.
Thank you
TXLunchbox said:
Couple of things...
First, while I do appreciate the thanks, I was under the assumption you were going to add this to a full ROM you were working on and not just post it in another forum.
Click to expand...
Click to collapse
If you goto android.com its the home page to andorid....
http://www.android.com/
Boot animtion unsuccessful.
ShadyAce80 said:
Here is the boot animation and also the theme to the show.
Push the bootanimation.zip to system/media. Rename the existing file to bootanimation.zipold.
If you want the sound push the wav file to ect and rename existing file to PowerOn.wavold. I have only tried replacing existing files not sure if will work if you have no boot sound.
*DISCLAIMER* I am no way responsible for what you do to your device
Thanks to TXLunchbox for the bootanimation
http://dl.dropbox.com/u/64304416/bootanimation.zip
http://dl.dropbox.com/u/64304416/PowerOn.wav
Click to expand...
Click to collapse
I tried to push both files like you described even renaming to bootanimation.zip.old. rebooted but no animation. Im on valhalla black final + black booster.

Modern and Smooth Bootanimation

Hey Guys,
I made a Bootanimation for my HTC One M8, and I thought of sharing it with you.
It's in FullHD 30FPS, but it doesn't contain a Downanimation. If a lot of you guys like it, I can make one and publish it too though.
I will probably update it to add a custom sound when booting, at the moment it's still the normal one.
-----INSTALLATION----
To install, download the attached file. Now, open your Root browser of choice and go to system/customize/resource.
Here you will find a file called "hTC_bootup_one.zip". Rename it to something like "hTC_bootup_one_orig.zip" or something else to keep the original name in mind if you want to switch back.
Now copy the downloaded file from this post and paste it in the resource folder. That's it, the animation is installed.
-----ATTENTION----
I personally had some problems when showing the animation to my friends, because I soft rebooted my phone 4 to 5 times in a row. Then, after rebooting again, it turned off and nothing happended anymore.
I don't know why this happens, but if you have the same problem, just wait. After some time, the animation will show. This can take up to about ten seconds. If nothing happens, hold the Power and Volume Up Buttons to Hard Reset (It's just called reset, no data get's lost. It just forces your phone to shut down.) your phone. Hold them for about 5 seconds, the phone will vibrate and the HTC Splash Screen appears. Now release the Buttons, the Phone boots up normally.
THIS IS NOT THE CASE WHEN NORMALLY REBOOTING THE PHONE!
I hope you love the animation as much as I do, just download and watch it.
Hopefully, I managed to put a download Link down in the comments, XDA prevents me from putting a link in the post...
---Downloadlink---
https://www.dropbox.com/s/ynugj25oixr34p1/hTC_bootup_one.zip?dl=0
Where is the link?
There is the download Link, this post is just to notify you[emoji6]
2nd Install Option
@Rainer Zufahl...
FYI, I successfully installed your boot animation a different way (which I think you may wanna think about adding to the OP)
I'm running Candy5 (Lollipop/CM12). I don't have a System/Customize folder, so here's what I did.
1. Using a file explorer, navigate to system/media and place "hTC_bootup_one.zip" file in there.
2. Rename original "bootanimation.zip" file to "bootanimation.bak"
3. Rename "hTC_bootup_one.zip" to "bootanimation.zip"
4. In properties of the new "bootanimation.zip" file, change permissions from rwxrwx to rw/r/r...save. Reboot. Enjoy.
This should help a lot of users having trouble installing.
Is there any kind of preview or something for this? Or should I just hope I like it ?
calebcabob said:
@Rainer Zufahl...
I'm running Candy5 (Lollipop/CM12). I don't have a System/Customize folder, so here's what I did.
1. Using a file explorer, navigate to system/media and place "hTC_bootup_one.zip" file in there.
2. Rename original "bootanimation.zip" file to "bootanimation.bak"
3. Rename "hTC_bootup_one.zip" to "bootanimation.zip"
4. In properties of the new "bootanimation.zip" file, change permissions from rwxrwx to rw/r/r...save. Reboot. Enjoy.
Due to the fact I'm not on Lollipop yet, I did not know about this way, but if it works, it's fine[emoji4]
Click to expand...
Click to collapse
calebcabob said:
@Rainer Zufahl...
I'm running Candy5 (Lollipop/CM12). I don't have a System/Customize folder, so here's what I did.
1. Using a file explorer, navigate to system/media and place "hTC_bootup_one.zip" file in there.
2. Rename original "bootanimation.zip" file to "bootanimation.bak"
3. Rename "hTC_bootup_one.zip" to "bootanimation.zip"
4. In properties of the new "bootanimation.zip" file, change permissions from rwxrwx to rw/r/r...save. Reboot. Enjoy.
Due to the fact I'm not on Lollipop yet, I did not know about this way, but if it works, it's fine [emoji4]
Click to expand...
Click to collapse
Here is a link to a YOuTube of the animation. Looks very cool!
https://www.youtube.com/watch?v=SOUbnfWBrcU
Rainer Zufahl said:
Due to the fact I'm not on Lollipop yet, I did not know about this way, but if it works, it's fine [emoji4]
Click to expand...
Click to collapse
No problem! Anytime!
I figured it was not only fine, but also pretty damn helpful for half the community...
:good::good::good::good:
I like this bootanimation, it looks cool
this looks awesome. downloading now
Wow , this one will go in all my devices !!! And i think a quick downanimation would be nice to
permissions
If it doesn't show up as in the youtube link, then you will need to change the permissions of the file to rw/r/r
(it vworked for me...)
Anyone know how to slim down the size of the zip, at 21 meg root explorer won't let me paste it in the media folder ...it's for my n5
Is there a new download link, current one not working. Thanks in advance
Check the YouTube video on my channel, the link to it is in a previous post, to get the download link in the description. I still can't post any links in my posts, soo... Yeeah...
Gesendet von meinem HTC One_M8 mit Tapatalk
Thanks messaged you on YouTube and got link lol
---------- Post added at 06:26 PM ---------- Previous post was at 06:09 PM ----------
Installed and working perfectly thank you
b3nuk88 said:
Thanks messaged you on YouTube and got link lol
---------- Post added at 06:26 PM ---------- Previous post was at 06:09 PM ----------
Installed and working perfectly thank you
Click to expand...
Click to collapse
can you share the download link here?
kairanz said:
can you share the download link here?
Click to expand...
Click to collapse
Go to the YouTube link on the first page of this thread and the link is there

[Port][Bootanimation][SM-T23xx] IOS 8 Glitch Bootanimation

Well... since emoboy had made and IOS 8 rom, I might as well port some sort of IOS 8 boot animation right? No? ok I couldnt find anything for the regular apple boot animation or I could get copyright strike for it. So this is the best I can do. I dont own any tab 4s as this is tested on my tab s and working fine.
Features
------------------
-Shutdown animation
-Bootup animation
- Should fit fine on the T23x as I built this specifically for it
Download
-----------------
https://www.androidfilehost.com/?fid=95916177934554370
Installation
------------------
Copy the qmgs from the zip to system/media and then set permissions to rw-r--r-- . Then reboot.
Developers
-------------------------
-Credit me if you want to use this
- To include this in your rom, simply just put it in system/media and replace those qmgs.
Credits
----------------
emoboy for IOS 8 Rom
Samsung theme designer
bootanimation website
many more I cant remember
Reserved. and sorry no video. Just search for Apple glitch or IOS glitch bootanimation for videoes
DUHAsianSKILLZ said:
Installation
------------------
Copy the qmgs from the zip to system/media and reboot.Not working? Then set permissions to rw-r--r-- (0664). Then reboot.
Click to expand...
Click to collapse
I would like to point out that rw-r--r-- is correct, however that is 0644 in permissions (just to avoid confusion). And I would strongly argue this step is necessary.
Nice work! You're the master of boot animations, huh? :good:
awesome
thanks :good:
thisisapoorusernamechoice said:
I would like to point out that rw-r--r-- is correct, however that is 0644 in permissions (just to avoid confusion). And I would strongly argue this step is necessary.
Nice work! You're the master of boot animations, huh? :good:
Click to expand...
Click to collapse
Lol I wish I was a master. I know them pretty well Anyway thanks for the permissions and I edited my post. I normally don't change permissions as after exporting it works fine on my Tab S. That's why I don't know much regarding perms ? Thanks a lot for pointing that out!
-DUHA
thisisapoorusernamechoice said:
I would like to point out that rw-r--r-- is correct, however that is 0644 in permissions (just to avoid confusion). And I would strongly argue this step is necessary.
Nice work! You're the master of boot animations, huh? :good:
Click to expand...
Click to collapse
working normal no need to change permissions
emoboy (Official Name!) said:
working normal no need to change permissions
Click to expand...
Click to collapse
Thanks! I was pretty sure it didn't need to be changed as it worked fine on my tab s. Should be good to go to include in your rom
-DUHA
Must read
note: if you are using custom boot animation from system/media/bootanimation.zip
then this will not work until you disable displaying bootanimation.zip
this mean you must enable displaying these files ( bootsamsung.qmg , bootsamsungloop.qmg , shutdown.qmg ) for the boot animation to work
---------- Post added at 01:36 PM ---------- Previous post was at 01:19 PM ----------
to disable bootanimation.zip you must replace system/bin/bootanimation with the stock one which can be found in your device official firmware!!
after replacing bootanimation file in system/bin with the stock one it will ignore bootanimation.zip DONE !
NOTE: this work only for samsung devices
Nvm

[SOLVED] bootanimation replacement results in a blank boot screen, fix?

Update: I found the bootanimation.zip file, and replaced it with a custom animation file. However, that resulted in a blank screen with the Android logo, not the new boot animation.
Then, I tried changing the "desc" text file, the number of frames in the new animation, and the file names to match the old boot animation file, but nothing's working. (Now its just a blank screen on boot, the Android logo is now gone.)
Does anyone have a solution to this?
_________________________________
(Please bear with the long post.)
I'm using the Honor 6x (BLN-L24) running Android 7.0.
So, I'm trying to replace the default bootanimation.zip file with a custom one so that I can have a custom animation on boot.
The problem is, I can't locate where the original bootanimation file is located.
I tried looking where the posts I read about told me to look: "/system/media" but it wasn't there. The only files present in that folder were audio files.
Obviously, moving the custom bootanimation.zip file there (in "/system/media") didn't work.
Then, I tried moving the custom animation file into "/data/local" but that didn't work either.
Finally, I just searched the entire system using root explorer and the only file I found was a "bootanimation" file in "/system/bin" that didn't have any label after it, (ie, ".zip, .png, etc.)
Replacing that file with the custom zip file caused my device to not have a boot animation at all, just a blank screen. It probably wasn't the right file. (I "replaced" that file by renaming it to "bootanimation.bak")
Btw, when I tried opening that file, all I got were a bunch of scrambled symbols and letters.
Does anyone have a solution on how I could possibly change my boot animation/ find the original boot animation file? I think I'm missing something here.
(My phone is rooted.)
It's inside /cust folder.
Sent from my Honor 8 using XDA Labs
adriansticoid said:
It's inside /cust folder.
Click to expand...
Click to collapse
It wasn't there either for some reason
Update: I found it in the cust_spec and the product/etc/media folder. Now it's just a matter of getting it to work. (Right now, only the text "Android" shows up on a black screen.)
snowdragyn said:
It wasn't there either for some reason
Update: I found it in the cust_spec and the product/etc/media folder. Now it's just a matter of getting it to work. (Right now, only the text "Android" shows up on a black screen.)
Click to expand...
Click to collapse
Sory man. I already forgot the location. I got the bootanimation to change before in my Honor 8 in EMUI 5. @gopinaidu77 do you remember?
adriansticoid said:
Sory man. I already forgot the location. I got the bootanimation to change before in my Honor 8 in EMUI 5. @gopinaidu77 do you remember?
Click to expand...
Click to collapse
I don't remember anymore.
snowdragyn said:
It wasn't there either for some reason
Update: I found it in the cust_spec and the product/etc/media folder. Now it's just a matter of getting it to work. (Right now, only the text "Android" shows up on a black screen.)
Click to expand...
Click to collapse
I guess it's due to incorrect permissions. You can change the permissions for the zip by long pressing and selecting permissions. Sorry i don't really remember the correct permissions but you can look it up on Google. If that doesn't work either you can use jrummy's bootanimation app from the playstore.
Anas Rahman said:
I guess it's due to incorrect permissions. You can change the permissions for the zip by long pressing and selecting permissions. Sorry i don't really remember the correct permissions but you can look it up on Google. If that doesn't work either you can use jrummy's bootanimation app from the playstore.
Click to expand...
Click to collapse
It's r-w-rr.
gopinaidu77 said:
It's r-w-rr.
Click to expand...
Click to collapse
Nevermind, I think I found the error: apparently, I had to delete the folder called "part 1" to get it to work.
Thank you everyone for your time!
snowdragyn said:
Nevermind, I think I found the error: apparently, I had to delete the folder called "part 1" to get it to work.
Thank you everyone for your time!
Click to expand...
Click to collapse
Enjoy.
gopinaidu77 said:
Enjoy.
Click to expand...
Click to collapse
I will, thx for your help
snowdragyn said:
I will, thx for your help
Click to expand...
Click to collapse
You are welcome.
snowdragyn said:
Update: I found the bootanimation.zip file, and replaced it with a custom animation file. However, that resulted in a blank screen with the Android logo, not the new boot animation.
Then, I tried changing the "desc" text file, the number of frames in the new animation, and the file names to match the old boot animation file, but nothing's working. (Now its just a blank screen on boot, the Android logo is now gone.)
Does anyone have a solution to this?
_________________________________
(Please bear with the long post.)
I'm using the Honor 6x (BLN-L24) running Android 7.0.
So, I'm trying to replace the default bootanimation.zip file with a custom one so that I can have a custom animation on boot.
The problem is, I can't locate where the original bootanimation file is located.
I tried looking where the posts I read about told me to look: "/system/media" but it wasn't there. The only files present in that folder were audio files.
Obviously, moving the custom bootanimation.zip file there (in "/system/media") didn't work.
Then, I tried moving the custom animation file into "/data/local" but that didn't work either.
Finally, I just searched the entire system using root explorer and the only file I found was a "bootanimation" file in "/system/bin" that didn't have any label after it, (ie, ".zip, .png, etc.)
Replacing that file with the custom zip file caused my device to not have a boot animation at all, just a blank screen. It probably wasn't the right file. (I "replaced" that file by renaming it to "bootanimation.bak")
Btw, when I tried opening that file, all I got were a bunch of scrambled symbols and letters.
Does anyone have a solution on how I could possibly change my boot animation/ find the original boot animation file? I think I'm missing something here.
(My phone is rooted.)
Click to expand...
Click to collapse
do u happen to still have the stock bootanimation file? I accidentally deleted it trying to change it... now I'd just be happy to have the original. I've tried the ones for other Huawei versions to no avail.
jflow36 said:
do u happen to still have the stock bootanimation file? I accidentally deleted it trying to change it... now I'd just be happy to have the original. I've tried the ones for other Huawei versions to no avail.
Click to expand...
Click to collapse
Yep, I still have it! Hope this is the file you're looking for.
(Just remember to change the name of the file in order for it to work)
snowdragyn said:
Yep, I still have it! Hope this is the file you're looking for.
(Just remember to change the name of the file in order for it to work)
Click to expand...
Click to collapse
thanks!
jflow36 said:
thanks!
Click to expand...
Click to collapse
you're welcome!
I'm not able to paste the custom boot animation in the folder. It says not enough storage! Root browser by jrummy pastes it halfway till 11MB and rest is not pasted there! And if i try to open that zip file, it just doesn't open up!
One more thing, if a boot animation is around 5 to 6 mb in size, it works without any problem!
Plz help me! I want to use watch dogs boot animation but its bigger in size!
Neeleshjindal said:
I'm not able to paste the custom boot animation in the folder. It says not enough storage! Root browser by jrummy pastes it halfway till 11MB and rest is not pasted there! And if i try to open that zip file, it just doesn't open up!
One more thing, if a boot animation is around 5 to 6 mb in size, it works without any problem!
Plz help me! I want to use watch dogs boot animation but its bigger in size!
Click to expand...
Click to collapse
Is there enough space in you root directory?
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
Neeleshjindal said:
I'm not able to paste the custom boot animation in the folder. It says not enough storage! Root browser by jrummy pastes it halfway till 11MB and rest is not pasted there! And if i try to open that zip file, it just doesn't open up!
One more thing, if a boot animation is around 5 to 6 mb in size, it works without any problem!
Plz help me! I want to use watch dogs boot animation but its bigger in size!
Click to expand...
Click to collapse
Is there enough space in you root directory?
Anas Rahman said:
Is there enough space in you root directory?
---------- Post added at 02:47 PM ---------- Previous post was at 02:36 PM ----------
Is there enough space in you root directory?
Click to expand...
Click to collapse
That's strange!
I recently rooted my device, and haven't done much! Just installed Dolby Atmos port.. but still it says 0.2GB free out of 2.8GB!
But still the boot animation is just 30MB! And free space is around 200MB available...
I'm sorry man, I'm new for rooting stuff, so kindly plz help me! Thanks
Neeleshjindal said:
That's strange!
I recently rooted my device, and haven't done much! Just installed Dolby Atmos port.. but still it says 0.2GB free out of 2.8GB!
But still the boot animation is just 30MB! And free space is around 200MB available...
I'm sorry man, I'm new for rooting stuff, so kindly plz help me! Thanks
Click to expand...
Click to collapse
Idk what's exactly causing the error but try other root explorers like mixplorer
https://forum.xda-developers.com/showthread.php?t=1523691
[solved] new boot animation fix
If you encounter the error of having a blank bootscreen and Android logo then you must verify the file that you put in /system/media.
The file should contain different folder starting from part0,part,...
The boot animation file should also contain desc.txt file that contains proper display configuration of your device hardware and name of all part folders followed by c and 2 digit 0s and 1s
After all,
One and last thing every part folder should contain many jpg images of same name followed by sequential numbers.
At last change file permission to rw- r-- r-- using any kind of root explorer.
Permission should look like this
https://ibb.co/nj7gkFB
I use es file explorer

[MOD][GUIDE] Lock/Unlock sounds (root only)

So I was thinking how much I missed being able to change the sounds of my device (lock/unlock, touch etc... And remembered we can change them if we are rooted. Sadly I am not. Only because for me the loss of 20 percent of battery life is a big deal in my day to day activities. But for those of you who went for root heres a little something extra I've been doing since the S4 days. I STRONGLY RECOMMEND YOU COPY AND SAVE THE EXISTING .OGG FILES YOU PLAN TO REPLACE SO THAT LATER IF YOU WISH YOU CAN GO BACK TO STOCK.. With that being said. THESE ARE NOT MY FILES AND TAKE NO CREDIT FOR THE WORK YOU WILL FIND ON THE THREAD LINK BELOW. A fella here that goes by the name of dav3wash put this thread together to bring us a collection of cool Lock/Unlock sounds which I believe will still work here. So if you find yourself over on his page hit that like button to show your appreciation .NOTE: I HAVE NOT TESTED for I am not rooted. I just download the desired file.
From your downloads folder navigate in the zip file and copy the .ogg file
Then go into your device and follow this path.
The path is as followed in your rooted system. From any file explorer go to: System(Root)/System/media/audio/ui.
And paste the new files after removing the old one to a safe location.
Then reboot and your good.
Redirect thread here for files https://forum.xda-developers.com/showthread.php?t=2304198
Hope you enjoy. And just so we know ...if anyone tries this can you leave a comment letting others know if it works or not. Thank you!
Will give it a try
---------- Post added at 12:44 PM ---------- Previous post was at 11:58 AM ----------
Mr nerd said:
Will give it a try
Click to expand...
Click to collapse
it does work
dont forge to set the permissions
read for all 3 write for owner

Categories

Resources