Database Info

[Q] Rooting Galaxy Tab 10.1 Gone Wrong

I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.

kjsphoto said:
I have followed many tutorials to the T and I have flashed with philz_touch_6.55.0-p5110 and GT-P5110_ClockworkMod-Recovery_6.0.1.0 to absouetely no avail whatsoever.
My counter is up to 15 and when I go into the recovery mode I get the default. I cannot for the life of me get the tablet to launch the recovery screens.
I have been at this for 4hours. I cant even update the device as it says the device altered. It also show custom , yet I CANNOT load the recovery other than the default.
What am I missing?
Android 4.2.2
Table: GT-P5113
More details:
From ODIN:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> GT-P5110_CWM_6.0.5.0.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Odin both 3.5 and 1.85 I tried. Both say pass. I am completely and totally frustrated.
Click to expand...
Click to collapse
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989

jrc2 said:
Flash recovery in Odin again but this time with auto reboot UNCHECKED. After it flashes, wait 10 seconds, unplug tablet, and boot into recovery (hold in combo until you see recovery screen. It will exit download mode.) Wipe cache and Dalvik and reboot. I'd recommend flashing @Android-Andi's TWRP for a good touch based recovery.
Sent from my SGH-T989
Click to expand...
Click to collapse
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...

kjsphoto said:
Thank you very much! Once I unchceked the re-boot and then rebooted holding down the key it worked!
I am not sure what you mean by the TWRP flash?
Again, thank you very much for y our help..
Kindest Regards...
Click to expand...
Click to collapse
TWRP is another recovery. @Android-Andi has a recovery thread in the development section. If you go to his download page, there is a .zip and a .tar file. The .tar is for Odin and the .zip is if you want to flash it in your current recovery. You just choose one file and flash it accordingly.
Sent from my SGH-T989

[KK&LP]Some service firmwares for SM-T53X and SM-T33X

Hi folks .
Present some servise firmwares , including BL , AP , CP , CSC with PIT-file , for SM-T53X and SM-T33X .For KitKat and Lollipop .
Flash via Odin .
Link https://www.androidfilehost.com/?w=files&flid=35515
Don't forget press "Thanks" button

I added a few firmware

Added few firmwares for Tab 4 8.0 (5.1.1)

service firmwares will come as OTA updates?

patsio said:
service firmwares will come as OTA updates?
Click to expand...
Click to collapse
Flash via Odin .
Click to expand...
Click to collapse
Read OP

repey6 said:
Read OP
Click to expand...
Click to collapse
Yes, i only wondered if service firmwares will come later as OTA updates. I got Galaxy 335, i guess SM-T335XXU1BOF8_AUT_SERVICE_LP_5.1.1 is for me as i'm on LP T335XXU1BOF8_T335OXA1BOF8_T335XXU1BOF3_Home.

patsio said:
Yes, i only wondered if service firmwares will come later as OTA updates. I got Galaxy 335, i guess SM-T335XXU1BOF8_AUT_SERVICE_LP_5.1.1 is for me as i'm on LP T335XXU1BOF8_T335OXA1BOF8_T335XXU1BOF3_Home.
Click to expand...
Click to collapse
Yes it is . Why do you want Service firmware ?

repey6 said:
Yes it is . Why do you want Service firmware ?
Click to expand...
Click to collapse
Because ServiceFirmware updates offer the latest stability enchancements, security buf fixes etc, right? By the way, the zip contains 4 files, could you pls explain what each file initials stand for?
Thanks!

patsio said:
Because ServiceFirmware updates offer the latest stability enchancements, security buf fixes etc, right? By the way, the zip contains 4 files, could you pls explain what each file initials stand for?
Thanks!
Click to expand...
Click to collapse
The main difference between a service firmware from a usual stock - forced reset to factory settings and provided wipe system (command "csc = factory" in the file on the way cache.img/recovery/command; for regular firmware it looks like "csc = home"). CSC file contains PIT-file to force the file system layout verification.
Caution! Service firmware produces wipe user data:
- removes section USERDATA and recreate it with the factory settings;
- removes SD-CARD partition and recreate it with the factory settings (format Internal sd-card).
It makes:
- the system state official: in Downloading mode Current Binary: Official and System Status: Official;

@repey6, I read the complete thread, but I'm still not clear on which of these files I should flash. Do I only flash AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5, or all 3? And if all 3, in which order? (Asking here, since I don't want spam sub77's ROM thread)

SomeDuder said:
@repey6, I read the complete thread, but I'm still not clear on which of these files I should flash. Do I only flash AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5, or all 3? And if all 3, in which order? (Asking here, since I don't want spam sub77's ROM thread)
Click to expand...
Click to collapse
All three files simultaneously .

repey6 said:
All three files simultaneously .
Click to expand...
Click to collapse
What, like so?:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cuz I did that, and it seems to only flash the stock ROM. Anyway, the result is the same - it keeps stuck at the bootlogo and, after a while, becomes responsive to touch, but with no screen updates...

SomeDuder said:
What, like so?:
Cuz I did that, and it seems to only flash the stock ROM. Anyway, the result is the same - it keeps stuck at the bootlogo and, after a while, becomes responsive to touch, but with no screen updates...
Click to expand...
Click to collapse
Try to reflash again and tick re-partition checkbox

I did:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_BTU_T530BTU1BOE1_CL4973560_QB5048859_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_T530XXU1BOD8_CL4741109_QB4756762_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> persist.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> hidden.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Le proof (Click for image).
It says I've got firmware/bootloader (I don't think there's a way to tell which version of the BL you have) version T530XXU1BOD8, so that seems to be the same as the Lollipop stock ROM (T530XXU1BOD8_T530OXA1BOD8_HOME.tar.md5).
It still won't boot into anything resembling an OS, but I'm gonna go through the whole TWRP and CM installation again. Who knows, maybe it'll do the trick.
I'm afraid this is a different problem tho, like it's not loading the correct display drivers or something...

After flashing you must hear Samsung music normal and wait 8-10 min

repey6 said:
After flashing you must hear Samsung music normal and wait 8-10 min
Click to expand...
Click to collapse
Yup, heard the startup tune, Kies recognized my device again:
(And I let it update the firmware to the latest official whatever)
But it still will not show anything else than the bootlogo as I'm writing this (+10 minutes). I'll keep it plugged in for the rest of the afternoon, maybe something will happen. If not, I'll try again in a few months, maybe it's just some weird bug with the device, idk.
Anyway, thank you for your assistance @repey6!

SomeDuder said:
Yup, heard the startup tune, Kies recognized my device again:
(And I let it update the firmware to the latest official whatever)
But it still will not show anything else than the bootlogo as I'm writing this (+10 minutes). I'll keep it plugged in for the rest of the afternoon, maybe something will happen. If not, I'll try again in a few months, maybe it's just some weird bug with the device, idk.
Anyway, thank you for your assistance @repey6!
Click to expand...
Click to collapse
Strange all . Try to go to stock recovery and do factory reset . May be this help ?

Galaxy S6 ( SM-G920F) 5.1.1: Softbricked After Flashing Kernel

[Q] Soft brick S6 ( SM-G920F) 5.1.1.
Tried to flash it with S6_UniKernel_v8-0002-ODIN, cf-autoroot, and it did only say pass and the phone started to reboot but it didnt get pass the logo part. So I tried to go back to stock firmware, and it only got fail so I tried with 5.0.2 instead and that didnt work either. Both case gave me this kind of error.
The firmware was from sammobile.
I didnt saw OEM in "Developer options" hope that I didnt miss it, but some post did say some phone have bootloader unlocked at start, so it should be noproblem to flash the phone. But it didnt work out for me so well.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

KFelix said:
.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920FXXU1AOCV_G920FTEF1AOC1_G920FXXU1AOCW_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Install Smart Switch (Kies for newer models) on a computer, and use the option Emergency software recovery and initialization.

cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.

Calnyx said:
cf-autoroot is outdated, and you can't downgrade to 5.0.2 after you've had 5.1.1
Try to flash the kernel again and see if it boots. Otherwise do what the previous post says.
Also, flashing unikernel would have rooted it with no other steps needed.
Click to expand...
Click to collapse
I tried to connect phone with Kies, nothing happend, just "connecting.." what can I do?
Tried flashing kernel alot of times, same problem .
Just re-read his post, one small problem, the box i have is a bit damage and i can't find the S/N , is there any chance I can get the S/N , I have the ART code and some numbers under a bar but wasn't the S/N with numbers and chars?
Thanks for the help

Can't find the S/N on my box due to damage , is there other way? Do they still have the S/N inprinted under the battery? And when I'am in Odin "Binary : Custom , System : Official , Knox : 1" So it did someone "half-rooted" it or something but I have tried to reflash unikernel v8 still the same problem, is there any way to fix it without going back to the latest stable firmware with the S/N in Kies?

first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider

Ghostrider said:
first you should flash TWRP recovery in Odin from here https://dl.twrp.me/zeroflte/
for Odin you need the file with .tar at the end.
Then you can try Adam Kernel by Wanam from here http://forum.xda-developers.com/galaxy-s6/orig-development/kernel-adam-kernel-t3093569
and you can try Wanam Rom from here http://forum.xda-developers.com/galaxy-s6/development/mod-wanamlite-1-0-t3095155
in this is the Kernel included.
I use his ROM my self without any problems.
Ghostrider
Click to expand...
Click to collapse
Wow, dont know what to say but this did WORK , didn't know that I could open TWRP, because I tried to go to recovery mode but the phone didn't react so I just thought it was messed up. Thanks friend.

you're Welcome
good to hear it Worked
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Galaxy S6 - New firmware update crashed, emergency recovery not working

Hi everyone,
I've been trying the whole afternoon to fix my cellphone with my limited knowledge on Android. My cellphone tried to update his firmware yesterday but it showed an error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Than I plugged my cellphone with SmartSwitch but it bricked the cellphone and suggested to use the Emergency Recovery, which didn't work (stop at 83% and show an error message). I downloaded the ROM to be installed with Odin (G920W8VLU5DQI2_G920W8OYA5DQI2_G920W8VLU5DQI2_HOME.tar.md5) but still not working.
Then I tried to install a previous ROM but I keep getting fail on Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On phone:
Odin mode
PRODUCT NAME: SM-6920W8
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0X0500)
APSWREV: B:4 K:2 S:2
SECURE CHECK FAIL: (PIT)
I was able to reach once the boot recovery menu on the phone but by trying to reinstall the ROM, I came back to the start point. Since, I no more reached that menu again.
That galaxy S6 was provided by Koodo here in Canada.
Can someone help me to go through this process please.
Thanks so so much for your support

dragonwood said:
Hi everyone,
I've been trying the whole afternoon to fix my cellphone with my limited knowledge on Android. My cellphone tried to update his firmware yesterday but it showed an error
Than I plugged my cellphone with SmartSwitch but it bricked the cellphone and suggested to use the Emergency Recovery, which didn't work (stop at 83% and show an error message). I downloaded the ROM to be installed with Odin (G920W8VLU5DQI2_G920W8OYA5DQI2_G920W8VLU5DQI2_HOME.tar.md5) but still not working.
Then I tried to install a previous ROM but I keep getting fail on Odin:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On phone:
Odin mode
PRODUCT NAME: SM-6920W8
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
Secure Download: Enabled
KNOX WARRANTY VOID: 1 (0X0500)
APSWREV: B:4 K:2 S:2
SECURE CHECK FAIL: (PIT)
I was able to reach once the boot recovery menu on the phone but by trying to reinstall the ROM, I came back to the start point. Since, I no more reached that menu again.
That galaxy S6 was provided by Koodo here in Canada.
Can someone help me to go through this process please.
Thanks so so much for your support
Click to expand...
Click to collapse
Actually I downloaded the original PIT file of my cellphone and went around the security and it worked.!!

SOLVED - Bricked/stuck on Smart Switch error screen

Samsung S7 (unlocked) (UK) SM-G930F
Hi
I don't know really where to start but I can tell you where I've ended up.
I tried to install Resurrection and after I went through it all it has just ended up with Odin failing.
I then thought I would try to reinstall the stock from Sam's mobile and following that I'm ending up with still a fail and also smart switch software message remaining on the screen.
These are the files from Sam's mobile
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The message left on my screen after Odin's flash
Code:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 8, BINARY: 2
and odins error log
Code:
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4262 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

TokyoElbow said:
Hi
I don't know really where to start but I can tell you where I've ended up.
I tried to install Resurrection and after I went through it all it has just ended up with Odin failing.
I then thought I would try to reinstall the stock from Sam's mobile and following that I'm ending up with still a fail and also smart switch software message remaining on the screen.
These are the files from Sam's mobile
The message left on my screen after Odin's flash
and odins error log
Click to expand...
Click to collapse
The firmware you are trying to flash is older then what is already on the device. You need the correct version 8 firmware to flash with Odin.

cooltt said:
The firmware you are trying to flash is older then what is already on the device. You need the correct version 8 firmware to flash with Odin.
Click to expand...
Click to collapse
Thanks for the reply,
I searched for the youngest firmware for a UK phone and now its working, so thanks for the heads up.

TokyoElbow said:
Thanks for the reply,
is there anyway I can find out what firmware should go on this device?
Click to expand...
Click to collapse
The firmware you've posted is an old unbranded France yes?
This is the latest version of that firmware https://www.sammobile.com/samsung/galaxy-s7/firmware/SM-G930F/XEF/download/G930FXXS8ETC2/327936
If you know how to use Samfirm tool you can download it faster. The firmware code is XEF.

The firmware you've posted is an old unbranded France yes?
Click to expand...
Click to collapse
No, it was a UK firmware for the Three Network (H3G)
If you know how to use Samfirm tool you can download it faster. The firmware code is XEF.
Click to expand...
Click to collapse
Thanks, I'm not familiar with it, I'll check it out. I paid for a 30 day subscription so the download speed was ok.

TokyoElbow said:
No, it was a UK firmware for the Three Network (H3G)
Thanks, I'm not familiar with it, I'll check it out. I paid for a 30 day subscription so the download speed was ok.
Click to expand...
Click to collapse
Hey I posted the message before I saw you'd already found the right firmware so shouldn't have to do anything else now. Unbranded UK has the code BTU.
The S7 is getting on abit now so I don't think there will be any further release from veriosn 8.

cooltt said:
Hey I posted the message before I saw you'd already found the right firmware so shouldn't have to do anything else now. Unbranded UK has the code BTU.
The S7 is getting on abit now so I don't think there will be any further release from veriosn 8.
Click to expand...
Click to collapse
I think I'll grab the unbranded firmware as this one has Virgin crap all over it....(that didn't sound right at all HA HA) :laugh:
Nice one for the heads up on Samfirm, the speeds are just as quick as the paid subscription on Sam's mobile.
cheers