I was running an older version of fluent rom and decided to upgrade to 7.5. i downloaded it and checked the md5 sum and everything matched up. put it on my sd card and went into twrp. wiped everything and tried to flash and it failed. i tried once more and it failed and restarted. now im stuck at the white htc boot screen that says " this build is for development purposes only etc" in red.
I can hold vol up+ power and restart the phone but then im at the same screen.
ive also tired holding vol up+ power to restart and then vol down+ power to go to HBOOT but once im in hboot and let go of vol up+power its like it instantly selects something and it asks me if i want to update.
Parsing... [sd zip]
reset htc debug flag...
[1]adsp
[2]rpm
[3]sensor hub
[4]wcnss
apply update or not.
select yes it says ok next to 1-4. and then says press power to restart
if i say no it just says press power to restart.
im stuck and dont know what to do :[ any help would b greatly appreciated...
Did you ever flash firmware or some such thing by putting the file on your sdcard and then renaming it to 0P6BIMG.zip? Sounds like you have a file like that on your sdcard. Remove the sdcard and then boot to hboot. If you need the sdcard for a rom, you can mount the sdcard on a PC and delete the file from there. Then replace it in the phone and boot. If that's not an option, perhaps you can remove the card, boot to recovery and then put the card in and mount it in TWRP. Not sure about that but that's what I'd try. If it mounts, you should be able to delete the file from within TWRP.
There is hboot.zip on your ext sd card.That is why whenever you go to hboot,it ask to update.So power off the phone.Take out the sd card.Then boot up & go to hboot & select recovery.The flash the rom.But first check your current firmware verison.I think it is the problem to bootloop.If so update it from here http://forum.xda-developers.com/showthread.php?t=2723159
Related
Hi everyone,
Let's go straight to the point here's what took my phone down :
I had HTC Desire that I rooted with unrevoked. A several days ago I was notified that a new OTA update (the 2.29.405.2 version, the 28.89MB zip file) was available, so I downloaded it and tried to install it. The update wouldn't install as my phone was rooted. I found on some forum some guy that said he had the same problem and managed to install the update by renaming the zip file update.zip and moving it to the root of the SD card so this is what I did.
Now my phone is stuck at the HTC white boot screen, keeps rebooting. When I boot it in recovery mode it displays an error message (see attached file) like :
SD cheking....
Loading...[PB99DIAG.zip]
No image!
Loading...[PB99DIAG.nbh]
No image or wrong image!
Loading...[PB99IMG.zip]
No image!
Loading...[PB99IMG.nbh]
No image or wrong image!
I'm really new to all this and any help is more than welcome!
Well as far as I can see that's not an error message, since I get the same messages when booting into my Recovery mode on Nexus One (and mine is working).
Did you try wiping the phone and / or flashing your previous ROM again?
Thx for your reply.
Yeah I tried factory resetting it. To flash a ROM do I need to have a working phone, or just a working bootloader ? And how do I know my bootloader is still working ?
From what I understood the bootloader is the menu you get in when pressing [Volume down] while turning your phone on. If so, I do have a working bootloader, and the last (but not least) thing I need to be working is a recovery.
So I tried to re-install unrevoked while running Linux, but Linux doesn't recognize the device. I'll give it another try while running windows since it recognizes the phone if it's in recovery mode.
In case it doesn't work, is there anything else I can try besides sending the phone back to HTC ?
lahitsitely78 said:
Hi everyone,
Let's go straight to the point here's what took my phone down :
I had HTC Desire that I rooted with unrevoked. A several days ago I was notified that a new OTA update (the 2.29.405.2 version, the 28.89MB zip file) was available, so I downloaded it and tried to install it. The update wouldn't install as my phone was rooted. I found on some forum some guy that said he had the same problem and managed to install the update by renaming the zip file update.zip and moving it to the root of the SD card so this is what I did.
Now my phone is stuck at the HTC white boot screen, keeps rebooting. When I boot it in recovery mode it displays an error message (see attached file) like :
SD cheking....
Loading...[PB99DIAG.zip]
No image!
Loading...[PB99DIAG.nbh]
No image or wrong image!
Loading...[PB99IMG.zip]
No image!
Loading...[PB99IMG.nbh]
No image or wrong image!
I'm really new to all this and any help is more than welcome!
Click to expand...
Click to collapse
The same thing happened to me several weeks ago while working on some settings and updates. I freaked out a lot, but this is what worked for me. It may work for you:
1. Remove the battery from the handset
2. Press & hold the power button on the handset for 10 seconds
3. Re-insert the battery
4. Press your volume down/up button (depending on what device you have) and while holding it, press the Power button.
I would suggest making a Nand Backup once you're in the HBOOT screen, but before you do it, chose the USB-PC Toggle option so that you can go into your phone via Windows Explorer and remove any flashable zip file your SD may have other than the ROM you want to flash.
what happend when you enter the recovery menu by selecting it with volum button and then power button to enter ? does it reboot into a green menu called clockworkmod ?
did you ever download a custom rom, such as for example defrost.zip and copy the file without unzipping it to your sd card, then select wipe all stuff you have and install that rom (zip) file. did you do that ?
i am also new to it and i have the same phone as you, but all works great for me, just needed to read many posts and tutorials here, then i did it and i am happy with it.
RobertVanHagar said:
1. Remove the battery from the handset
2. Press & hold the power button on the handset for 10 seconds
3. Re-insert the battery
.
Click to expand...
Click to collapse
Can you explain what it's gonna do and what are the risks ?
kasalamite said:
what happend when you enter the recovery menu by selecting it with volum button and then power button to enter ? does it reboot into a green menu called clockworkmod ?
Click to expand...
Click to collapse
It enters a menu with 4 items :
FASTBOOT
RECOVERY
CLEAR STORAGE
SIM LOCK
Then when I select RECOVERY it enters the HTC boot screen endless loop...
I tried using unrevoked but it didn't work, then I tried using a RUU but it didn't work either.
I'm kinda loosing hope here any other idea what I can try?
SOLVED
It's alright I managed to run a RUU while the phone was in the fastboot submenu of the HBOOT
well I got the same problem.
Is there a real solution to it?
entering in nandroid just wont work.
As I said running a RUU worked, even though it wiped all the data off the phone.
i was using rom maneger, downloading roms ans stuff.. so the phone asked to be rebooted and i did.. and now im stock on the white screen with the htc logo in the middle.. plz help me!!
I'm assuming you can still boot into hboot? If so, you can copy a new ROM to your SD card and then install from there.
>Vol Down
>Power on while holding Vol Down
>Select Recovery and you should get CWM
>Install zip from SD card
>Choose zip from SD card
If CWM isn't working for you, then you can install this ROM as it autoloads through hboot:
http://forum.xda-developers.com/showthread.php?t=965634
If you can't get into hboot, then you probably have fastboot enabled. Pull the battery and then you should be able to >Vol Down and >Power to get there.
Thank you so much i couldnt go into recovery so i installed the rom that you said and its working fine!!
Dont worry this is not a problem. You probably have the wrong recovery image. Flash CM7 Cryangenmod 7 from the dev section. Once in there open rom Manager and flash recovery 2.1.3.5 at the bottom of the app.
steps
1 pull the battery, then put it back in
2 Hold the vol button down at the same time you are holding the power button.
3 Select recovery
4 Select CM7 from the sd card and flash it.
5 once it starts up flash the other recovery.
6 Now flash the rom you wanted from your sd card.
7 before you do Make sure you wipe everything. Card Partition, Dalvik, data factory reset.
I tried flashing chingy's gingervitis but its got all sorts of problems for me.
Can someone tell me how to get into CWR without Rom manager so I can flash my backup? I can't download it from the market because opening the market freezes and reboots my phone.
Turn phone off > Hold vol - (first) then hold the pwr button
Plug into pc...adb reboot recovery
g00s3y said:
Turn phone off > Hold vol - (first) then hold the pwr button
Click to expand...
Click to collapse
If you want to restore a CW backup choose the "recovery" option.
Sometimes it will start scanning the P05IMG.zip file if you have one on the SD so take it off with a card reader so HBOOT doesn't scan the file, unless you want to just restore one of the RUU's then you can leave it there and install it from HBOOT.
Hi, first post on here. I had Revolutionary 1.1.8 ROM on my Sensation 4g and I was preparing to flash 3.0. I flashed the new radio and proceeded to flash Super-Wipe in CWM recovery, after the wipe I got an error that was something like "Back Button Menu Disabled". Whenever I pressed the Power Button it acted the same as if it was the Back key. I could not flash the new ROM so I pulled the battery and tried to restart Recovery. When I get to the Bootloader it scans for and finds the radio i have on my SD card and will not let me advance past the update. When I try to boot my phone normally, it stays on the HTC splash screen and will not start, now I'm stuck and I need my phone...can ANYONE help? I need my phone!
Delete the radio zip file from the flash card then.
Whenever you get the power button back menu button disabled, i normally just keep pressing volume up and down together till it says enabled again.
What to do if u cant delete from the sd card
remove sd card, boot up in bootloader, select recovery, reinsert sd card, wait 10 seconds, go to install zip from sd card and proceed.
xl VipeR lx said:
Whenever you get the power button back menu button disabled, i normally just keep pressing volume up and down together till it says enabled again.
What to do if u cant delete from the sd card
remove sd card, boot up in bootloader, select recovery, reinsert sd card, wait 10 seconds, go to install zip from sd card and proceed.
Click to expand...
Click to collapse
Thanks man, I didn't even think of that...you've saved my day bro.
There are several threads and questions regarding soft brick of MT7 TL-10 after deleting of system in TWRP. Some people referring that installation stucks at 90 percent..i had the same problem..playing in TWRP and suddenly deleting/wiping system and all data..i was trying all possibilities mentioned in this forum..after many hours i succeeded to bring my phone back to business. Now i would like to share my knowledge gained during this process. I own an international version of MT7 TL-10..Before updating to Lollipop and wiping all data i was running B125SP02 firmware.
Here is step by step the procedure:
1. boot into bootloader( Vol Down + Power button with phone plugged to PC)
2. Download fastboot.zip from here: https://mega.co.nz/#!fZ4CCDJD!gSMMZGhfsEx23LqbPelCWFchMYhHtl3Ro6kv7Rpz-40
3. You need to flash Boot and Recovery image in fastboot..Click thru the folder till sub folder named Fastboot..Press Shift+Right Click - Open Command window here: type - fastboot flash boot boot.img, press Enter..next command - fastboot flash recovery recovery.img..with this you have flashed boot and recovery images..dont close the command window and dont unplug your phone..stay connected
4. prepare you SD card, i used San Disk 64GB, any card 4GB+ should do the trick..Card must be formated in FAT32 otherwise your phone wont recognize your card..this you can do very easy way..
This small utility will help you: http://download.cnet.com/EaseUS-Partition-Master-Home-Edition/3000-2248_4-10863346.html?tag=mncol%3bpop&cdlPid=10982635
5. download the rollback package for M7 TL-10 http://consumer.huawei.com/it/support/downloads/detail/index.htm?id=45463
copy dload folder to your formatted FAT32 SD Card....remember, you are still in bootload mode.
6.now go back to opened command window, and you type: fastboot reboot and press enter..the card is till not inserted.the phone will restart and now you can unplug your phone..you will get scree restart/wipe data/wipe cache
7.insert your SD card into your phone, press and hold Vol UP and Down at the same time and press Power button. phone will restart but you are still holding Vol Up and Down pressed for aprox. 10 seconds till Huawei logo disappears.
8.Update will start automatically , when update is done, phone will restart again till screen restart/wipe data/cache..you have successfully rolled back..stay there, do nothing, leave your phone how it is.
9.download stock Rom, i chose this one: http://consumer.huawei.com/it/support/downloads/detail/index.htm?id=45462
10.remove your SD card, and on PC/Laptop delete the previous rollback update.app, but dont format the SD card..now copy dload folder from downloaded firmware, in this case B125SP02..
insert you card back into your phone
11.Now press again Vol Up+Down, keep pressing for aprox. 10 seconds and restart the phone with one Power button press..wait until the Huawei logo disappears..update will start automatically...wait till its finish, phone will restart and boot your system. And you are back again.
I guess, this quide should help also for TL-09 model, but with with Rom for your model.
Hope i could help you. If you have any questions, just PM me.
Hello!
Do you know where can i take the corect boot.img and recovery img for L09?
Thank you!
Its the same..
Hello !
You sad this:
".Update will start automatically , when update is done, phone will restart again till screen restart/wipe data/cache..you have successfully rolled back..stay there, do nothing, leave your phone how it is."
I installed the update, my phone restarted, it started again, but it freeze at huawei logo. That wipe/delete menu is not appear.
You phone did the same?
I continued with the installation, i pressed vol up + vol down, the huawei logo disappear, but the screen become black, and it is staying black.
Update: I fixed the black screen but the installation of the kitkat freeze at 90%
Thank you!
Did you unplug your phone? if yes, try to flash lollipop recovery http://forum.xda-developers.com/mate-7/orig-development/recovery-twrp-2-8-7-0-mate7-android-5-1-t3156779
There delete/wipe everything what you can..flash back the original recovery and try it one more time
Thank you for your help!
It is working now!
I unpacked the B137 rom, and from this rom i forced flash from adb "system.img".
After that i did you guide again!
But, after the installation of the transition pack, the phone didn't want to install the kitkat update.app.
But i forced the installation of the software (3 button method) with the card ejected, and when the installation screen appeared i inserted the card.
And now everything is ok.
Thank you!
Have a nice week-end!
thank you
thank you
thank you
10 days suffering --- till your post
its working now -- thank to you cata88pl
---------- Post added at 09:35 AM ---------- Previous post was at 09:29 AM ----------
Of course the credit and all the credit toyou ( alworth )
realy thank you very much for you thread
However, after fast boot manually and automatically wipes did not do it.
I still have problems
After installation, I can not roll back the recovery mode with 3 function buttons
After I installed the original ROM and hand wipes but remained at 90 percent.
THANK YOU!
after hours of flashing roms in all different ways I finally managed to boot this piece of crap.
Props for alworth and cata88pl for helping me out
help please
However, after fast boot manually and automatically wipes did not do it.
I still have problems
After installation, I can not roll back the recovery mode with 3 function buttons
After I installed the original ROM and hand wipes but remained at 90 percent.
i have the exact same problem
my soloution thanks to cata88pl & alworth
first of all you must never push 3 function key (vol + vol - power) while you connectet to pc ( cause 90 % stuck problem)
1. unpack kitkat using huwai update extrator and flash system. img through adb by command: fastboot flash system system.img
2.Download fastboot.zip from here: https://mega.co.nz/#!fZ4CCDJD!gSMMZG...l3Ro6kv7Rpz-40
3.You need to flash Boot and Recovery image in fastboot..Click thru the folder till sub folder named Fastboot..Press Shift+Right Click - Open Command window here: type - fastboot flash boot boot.img, press Enter..next command - fastboot flash recovery recovery.img..with this you have flashed boot and recovery images..dont close the command window and dont unplug your phone..stay connected
4.download the rollback package for M7 TL-10 http://consumer.huawei.com/it/suppor...x.htm?id=45463
copy dload folder to your formatted FAT32 SD Card....remember, you are still in bootload mode.
5.now go back to opened command window, and you type: fastboot reboot and press enter..the card is till not inserted.the phone will restart and now you can unplug your phone..you will get scree restart/wipe data/wipe cache
6.dont insert your sd card yet
7.push 3 functional key and when screen going black insert your card rapidly, wola roll back is done and follow other percidure by the way use this metoud for kitkat dload
rollback package and stock ROM link error anyone can replay new links