Database Info

[Q] Reset my Honor H60-L04 now no SD card

My H60-L04 was having so much trouble I factory reseted from CWM now my SD card is not detected some one please help.:crying:
How can I go back to the stock condition like out of the box condition.:crying:

To get back to stock condition, you must patient because there are quite a number of steps if you haven't already downloaded the files and prepared drivers before.
The steps:
In fast boot mode, flash stock recovery image.
Download and full stock ROM for you h6 model, uncompress it and copy dload folder to the root directory of a micro sdcard.
Insert the micro sdcard.
Apply three finger mode flash: power down phone, press and hold all vol up, vol down, and power buttons until it shows upgrading.
To flash in fast boot mode, you must prepare your PC with appropriate drivers. Fool proof installing huawei hisuite will install the necessary drivers.
You must also first download the stock recovery image and fast boot tools first and get to know the fastboot command to flash.
To boot into fast boot mode: power down, press and vol down and plug in usb cable.

dchsub said:
To get back to stock condition, you must patient because there are quite a number of steps if you haven't already downloaded the files and prepared drivers before.
The steps:
In fast boot mode, flash stock recovery image.
Download and full stock ROM for you h6 model, uncompress it and copy dload folder to the root directory of a micro sdcard.
Insert the micro sdcard.
Apply three finger mode flash: power down phone, press and hold all vol up, vol down, and power buttons until it shows upgrading.
To flash in fast boot mode, you must prepare your PC with appropriate drivers. Fool proof installing huawei hisuite will install the necessary drivers.
You must also first download the stock recovery image and fast boot tools first and get to know the fastboot command to flash.
To boot into fast boot mode: power down, press and vol down and plug in usb cable.
Click to expand...
Click to collapse
Thanks it worked :good:
But for some reason I can't use custom launchers like Nova,Apex .....
I'm not getting the option to choose between Hauwei home and custom launcher

L0GAN0 said:
Thanks it worked :good:
But for some reason I can't use custom launchers like Nova,Apex .....
I'm not getting the option to choose between Hauwei home and custom launcher
Click to expand...
Click to collapse
Definitely you can change the defaults. Only EMUI rom works a little differently.
Here it is: Settings > Manage apps > All > Look at the bottom the left icon "Default app settings" > Click in > Change default launcher

Tutorial -How to unbrick Lenovo Vibe Z K910 with 2 sim cards

This is how i unbricked my Lenovo K910 (chinese version with 2 sim cards)
I was acidentally wipe everything,
by everything i mean on dalvik cashe, system, internal storage, data and cashe.
and after that phone was empty and stuck on lenovo logo and blue light, bootloader was locked, recovery and twrp recovery was erased....
If i hit power power for 10 seconds and more, lenovo k910 turns off...again i hit power and lenovo logo is on screen , and blue light, and i cant acess recovery, because it is erased.
Whole one day I tried everything what i find on lenovo forum, xda devolepers...etc, but nothing didnt work for me.
Basically i did it with instruction from firts 3 pages on this theme, but with modified twrp recovery, every time i try with diferent recovery, mostly i was trying with cwm recovery and 2.7 twrp but i was unable to boot into recovery mode.
This is how i did it,
1.Download this:
minimal adb fastboot v1.3.1 http://www.mediafire.com/download/q77gkew59y1kbwk/minimal_adb_fastboot_v1.3.1_setup.rar
modified twrp recovery 2.8.1 i find it on somewhere on xda..i can't remember where http://www.mediafire.com/download/ul6751ndjc05ujl/recovery.rar
download custom rom that you wont to install, i use a baralajbi rom from needrom v13.
2. Install minimal adb fastboot v1.3.1
3.In directory where you install minimal adb fastboot v1.3.1, copy recovery from step 1 and custom rom that you downloaded from step 1.
4. Remove Usb data cable from phone and turn off your Lenovo K910 by pushing power button for 10 and more seconds, untill your screen is dark and without, blue, green , and red lights on.
5.Run minimal adb fastboot v1.3.1 as administrator, and write this fastboot boot recovery.img but dont hit enter.
6.Now push both volume keys (volume up + volume down) and connect the usb cable. After vibration hit enter in cmd.
7.After a few seconds your phone will boot in recovery.You will see 2.8.1 twrp recovery on yor phone, and on computer my is windows 7 it will open 12 gb partition from phone, wait if computer neds to download drivers for phone.
8.If you are erease everything like i did, in that 12 gb partition it will be only twrp folder and nothing else.
Copy rom that you downloaded from step 1 in that 12 gb partition.(not in that twrp folder)
9.In twrp recovery on your phone hit Install, and you will see a lot of folders , i cant rememeber where it was copied my custom rom from step 1.
but it is not so dificult, open every folder on twrp recovery untill you find your rom, chose it, and swipe to install
10.After install complete and reboot your system. You're done
11. dont use " adb sideload " command it will result in error: device not found
12. If you got some problem with windows while download drivers for you phone, you can manually download lenovo usb drivers, you will fin them on almost every custom rom for k910 on needrom.
I only register on this forum, to write this, a lot of things I have read here has helped me, so I have an obligation to help someone else.
I wish you good luck.
Branko
Serbia.

hi
i use this
but when i press enter ro boot in recovery
its say faild device is locked
and could not unlock boot loder becouse device is dead and no adb commands work !!

[SOLVED] H60-L02 bricked beyond recovery? Plz help me!

edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)

mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.

With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!

mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.

Thx. I will give it a try when I'm back from work.
I let you know if it is working.

mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice

Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike

mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.

Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.

mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.

It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike

The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.

igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?

error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.

igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.

Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..

igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.

zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse

i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!

mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"

Honor 8 Can't Download Firmware, Can't Flash, Bricked? [Solved]

Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)

Download the 70mb package for firmware downgrade and the latest marshmallow firmware from your regional huawei's website.
Extract the small package and put the .app file in a folder called dload on the SD card and insert it in your phone.
Boot by holding volume + volume - and pressing power, holding all 3 buttons until the phone vibrates.
The package will flash and afterwards you repeat the process, this time using an .app file from the full marshmallow firmware.
The 70mb package installs not matter how messed up your file system is, and makes your phone ready for the MM firmware. This process brings any brick back to life. Good luck.

I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.

menriquez said:
I too was trying to root my FRD-L04 and apparently used the wrong TWRP because now I get...
Code:
Unable to open ' ' to wipe crypto key
Unable to wipe Data
Unable to format to remove encryption
Failed to mount /data (invalid argument)
and I cant get the keyboard loaded so I can log into my wifi when I do a factory reset. I really have no idea how best to attack this...my phone is bricked I can get into TWRP 3.0.2.0 recovery, sideload, and fastboot (i think). I am currently downloading the stock ROM for my device and will try to sideload it.
I feel I need to fix the data issues thought before trying to load the ROM as I dont think my data partition is working at all now. Does anyone have any suggestions or a step-by-step guide on how to fix my bricked phone?
I've tried all sort of things today but no matter what, I cant get a keyboard working so I guess that means I'm screwed....
EDIT - my phone doesnt have a insertable SD card so I cant fix things the way the above poster suggests.
Click to expand...
Click to collapse
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563

sysak said:
If you have nougat just flash the correct recovery from the twrp you already have. https://forum.xda-developers.com/honor-8/development/twrp-t3566563
Click to expand...
Click to collapse
This is truly one of the worse phones I have ever had when it comes to root and such. My frustration over what, for a unbranded unlocked phone that *should* probably SHIP with root, this phone has and is putting me through is super high.
That being said...so I flashed the new 3.1.0.0 recovery. Before doing that, I had just tried to Unbrick the phone with flashing B162 image with 3.0.3.0...so now the phone is totally frozen in the "Your device has been unlocked and can't be trusted..." screen. Nothing I seem to do can get it out of this mode.
I want to install the rooted b378 boot.img file I just downloaded, but am unable to find the button commands to get the bootloader loaded. Does anyone have any suggestions in somehow trying to save the day with this damned phone?
much thanks in advance.
EDIT: So I got the phone in bootloader mode by pressing vol up/vol down/power and inserting the usb cable...i flashed the rooted boot.img and twrp 3.1.0.1 to both recovery and recovery2 and now i can get into recovery. I feel like I may actually have a chance now to fix this damn thing...
So can anyone point me in a direction where, from this point with the new recovery loaded and the modded boot image installed, where i can get this phone working?? ill use ANY ROM it dont really matter at this point...

Don't worry. It's really easy, once you know what to do, just realy easy to screw up if you don't. If your phone is a mess just roll back to android 6 using the procedure i described above. Once your phone works, update to nougat and install twrp and root following this guide: https://forum.xda-developers.com/honor-8/development/twrp-t3566563

Same issue
Ramonator said:
Hi, after trying unlock my bootloader, I couldn't get into recovery mode without "Your phone cannot be trusted" getting stuck on my screen.
I re-locked the boot loader but now when I go into recovery it says "Data Partition is corrupted please format" then it asks me to connect to a wifi network which then just shows errors everytime the password comes up.
I tried to turn on USB Debugging to ADB sideload a firmware, but I can't because the phone has been resetted; if I try to enter a wifi password the keyboard doesnt show it's just the google voice (which doesn't work) with no options. If i skip the wifi option it just goes on the google login and gets stuck on "Checking Info".
Any solutions to the problem please?
EDIT: I just re-unlocked the bootloader and now its permanently stuck on "Your device cannot be trusted, booting now" regardless of what buttons I press during startup
EDIT 2: I fixed it, it was long and complicated but I got it to work, here's how.
1. When flashing TWRP, I realized I was flashing the TWRP for EMUI 4, so I flashed TWRP for EMUI 5. (Make sure Bootloader is unlocked)
First have all the adb/fastboot drivers, for windows shift + right click the folder and click "Open Command here"
Make sure the twrp img file is in the same folder as the adb folder.
On the honor 8 phone, if it is stuck like mine, turn the phone off and then hold Volume Down + Power Button until the download mode is on the screen
Type "fastboot flash recovery (twrpfilename).img"
Once it's done, turn it off and then hold power button + volume up AND volume down at once till TWRP comes on
(Continuously hold it, if the "Your Device cannot be trusted" screen comes on release)
2. (Make sure internal storage and data are backed up externally for this)
Reset system, data, cache/dalvik, and internal storage
3. Download Update.zip and the second .zip from a website on google, search Honor 8 Manual Nougat and click the link from smartstocknews (I can't post links) but do not follow the steps from that website, and also download GAPPS from open GAPPS. Make sure ARM64 is selected and not ARM as well as 7.0
4. After wiping, mount the Honor 8 by connecting it via USB to a computer, and press "Mount" on TWRP
Upload the both update.zip and update_data_full_hw_eu.zip and GAPPS ARM64 7.0 to internal or external storage
5. Exit mount and go to install, install the zips in this specific order and do not reboot in between
A) Update.zip
B) Update_data_full_hw_eu.zip
C) GAPPS.zip
6. Reboot after GAPPS is done (it might show already installed, if that's the case then it's alright, reboot anyways)
Click to expand...
Click to collapse
I pretty much have the same issue. No keyboard showing, just the stupid voice thing, and the Bootloader is Relocked. How did you get it fully unlocked. I can't get it. I guess let me get that resolved first (the bootloader) and I can try to go from there. Please help me.
UPDATE: Never mind I fixed it. I'm not really for sure how either but I think it mainly was just persistence.

Didn't work
Hello, so earlier today I tried to install RROS newest version in hope to get magisk/unrooting my phone because I'm addicted to snapchat and I rooted my phone with SuperSU earlier but didn't know u can't login to snapchat after that. It failed idk why, (I followed instructions very clearly and searched info from internet before doing that) causing me to brick my phone so when I booted it, it only showed black screen. After couple hours not finding way to get into twrp with my circumstances I managed to flash boot, recovery and system images, I tried to reboot and see what happens, (just in case, I kinda knew I didn't had ROM installed at the time, I also was hoping RROS to boot) nothing happened expect my phone got stuck in boot screen for booting EMUI, which was not installed obviously. Again after couple hours I stumbled to your post and managed to finally get myself into TWRP, I followed again ur instructions and everything was going fine, no erros, not anything. When Gapps was finished installing, I rebooted and again it just got stuck into booting screen. I did press and hold Power button, vol+, vol- and got myself into some kind of ROM installing screen, (hard to explain I don't exactly know what is name of it) and no it wasn't Huawei erecovery screen (Power button & Vol+ and no it didn't work me either saying that "getting package info failed") so in that ROM installing screen it just was stuck at 5% installing, and now I don't know what to do. My phone got locked again and I'm stuck at booting screen.
Note:
I don't have SD Card, should I get one and install stock rom?
Sorry for being kinda unclear but I'm tired it was 7 hours ago I got my phone bricked and have surfed on the web finding for answers ever since.
Also as you might notice, yes, I'm new to modding devices etc but still I'm not totally noob. Please help ASAP.
[SOLVED] So after hour of watching netflix as depressed teen I tried to reboot my phone again just in case, got stuck in booting screen. Then I held Power Button + Vol+ and got myself into EMUI stock recovery mode, I chose wipe cache partition and wipe data/factory reset, after that I rebooted my phone, it was stuck in booting screen for like 2 minutes but then it actually finished booting and now my phone is again functioning and god bless locked & unrooted.

[Bricked] BLN-L24 Can't boot nothing

I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.

I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...

XelaaleX1234 said:
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
Click to expand...
Click to collapse
What reboot problem? Is the usb cable in when your attempting to boot fastboot?
---------- Post added at 01:46 PM ---------- Previous post was at 01:45 PM ----------
shadowcliffs said:
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
Click to expand...
Click to collapse
Follow this guide https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985

Got the solution
After the battery was empty it booted into a little different screen wich i was able to boot from, then i downloaded the firmware and put it into dload folder on external sd. Next i force updated by holding [volume up] [Volume down] and [Power button]. Now i have a working recovery boot and Rom. Everything is stock and the bootloader is locked again.
I discovered this this morbign and didnt had time to answer earlyer sorry for that...
Someone asked because of the bootloader the only thing i got was this broken screen didnt react to my input, cable plugged in plugged out. Maby the warning screen comes before everything or there is not enough time for the timout or whatever... The important thing is that you can fix it that way!:laugh::victory: