[Completed] Cube U55GT Talk79 Stuck in Boot Loop :( - XDA Assist

Hi all,
This is my first post so be gentle! I will try and help others as my knowledge improves to keep the circle going!
My Cube U55GT Talk79 tablet has been stuck in bootloop for a long time now.
The cause was I attempted to install an update to it through "settings">"about tablet">"update" within Android. The update failed but I could still use the tablet just fine after this. A day or so later I decided to hit the "factory reset" button in Android to wipe the whole tablet clean.
Since then it has been stuck in its boot loop.
I was thinking of flashing the firmware by USB or by SD card but, to be honest, I am not sure of how to do this. I have tried to boot into a recovery mood but that doesn't seem to do anything at all.
I am really stuck and confused and would be so grateful if anyone on here could help me. I know many of you have no reason to help an utter stranger but if you could spare the time to I would really appreciate it.

Hi,
I'm sorry but I don't find anything related to your device, so you must start asking in one of this Q&A forum:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
or
> General discussion > Questions and Answers
Good luck

Related

[Completed] [Q] Am I Bricked/SoftBricked , lose my Rom? Help please.

Please be patient,& Gentle with me, I'm new here,,, (TY) Hi, I have a Pantech P9060 (old I know ) Android 2.3.4 , Gingerbread( Stock Rom). It's rooted. It will turn on, load in the boot screen- and stop there, and if I touch the power/menu keys, it will start the loop acting boot process, without re-starting the phone , just continuous boot screen. I have changed the boot screen probably 3/4 times from the original AT&T screen using Jimmy Rummel apps, Rom Installer . I've tried returning back from backup, Titanium Pro, I backed up to google drive as well, but regardless I can't seem to reset to factory( which I've done before), or even update, Nothing.. It's so frustrating. I've searched these forums inside out for a solution as to not bother you guys with my old phone issues, but I have to admit, I need help with this. I don't think it's hard bricked, I'm thinking I may have flashed the wrong Rom( im not sure though) trying to upgrade from 2.3.4 .. Not positive though. I sure hope there's someone to help me here, It wont connect to the PC syncing, Pantech PC Suite, yet my pc shows the phone in Device Manager and Computer. So I'm hoping I've done something simple, :/ stupid,,but simple. Anyone help me out ? Thanks in advance.......
Hi,
I can't find a relevant thread on XDA for your issue, so you'll need to ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.

[Completed] [Q] JXD S6600C Tablet not booting

Hello,
I currently have a JXD S6600C Tablet [Device model: S6600C-A13-01-20131100926] which is not booting up. It is switching on, but the screen is not going past the "JXD" logo. I left it switched on for several hours, but it stays stuck on that screen.
I also reset the tablet to its factory settings through the recovery mode, but it is still getting stuck on the "JXD" screen. :crying:
Also, before I encountered this particular problem, I rooted the tablet, and was installing several games and apps. I restarted the tablet after rooting it, and had no problems; it is only after I installed some games that I encountered this problem.
Now, I don't have the drivers of this particular tablet, and I don't really know what I am supposed to do.
I would be very grateful if someone would be so kind to help me with this dilemma.
Thank You.
Hi there,
I'm sorry but I can't find anything related to your question/device.
Please post that in the forum bellow for more answers from the experts.
> General discussion > Questions and Answers or > Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck
Thank you very much. I shall do so.

[Completed] [Q] Eken_MID7_W70_GSL1680_Z7Z67-030A Bricked

Hello everyone I'm new to XDA, and a total noobie when it comes to tablets and computers. I have a tablet which was purchased over 1 year ago from one of the shopping on the internet sites, it was supposed to be a Wondermedia WM8850. 7" tablet.
But it turns out to be a Eken Mid 7 W70 GSL.1680.Z7Z67 030A. It is showing just a blank screen you can see that the light is on in the back ground but it doesn't respond to anything. I have tried all the button pressing, run battery till empty, and then recharged, but it won't respond. I did get it to go into recovery mode once but it wouldn't go any further. I thought I would ask if anyone had had the same problem and was able to solve it. Thanks for any information, its much appreciated. pin62.:fingers-crossed:
Hi,
You likely need to try flashing the stock firmware again. But I can't find anything relevant on XDA for that. You can ask in the following section about it, or you can try contacting the manufacturer about firmware and flashing instructions.
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!

[Completed] [Q] Alcatel POP 7

So I've had this tablet for a while now, and normally I come here for any help, tips and guides for rooting or unbricking.
Never have I had a block in the road till now. Originally the settings kept saying "unfortunately settings and stop".
I cleared the cache first then.... didn't work. Then the date storage.... didn't work either.. and finally I went extreme.
I factory reset the thing. Major no no... Now the lock scene is gone as well as blue tooth and wifi are non accessible.
If I try opening it, it'll crash and or sometimes just reboot on its own.
I really do not want to bother anymore with fixing the error and just want to revert back to stock rom.
So does anyone have the original firm ware? It is currently running JB 4.2.2
The MODEL # is P310A
I did flash the recovery to Clockwork Recovery. Since the original recovery menu
did not have a clear 'dalvik cache' option.
Yes I understand I have royally destroyed this thing. But this thing is completely useless to me if I can't log on to the net.
-Thank you.
Hi there,
I'm sorry but I can't find anything relevant to your question/device except this thread: [ROOT][RECOVERY] UNOFFICIAL Alcatel OneTouch Pop 7 p310a Tablet Thread
Please post that in the forum bellow for more answers from the experts:
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck

[Completed] Android Tablet(noname) Bootloop, HELP

Hey Guys, I have a problem. I got an Chinese or something like that lol^^, Tablet and it stucks in a Bootloop or something like that, when I start it , it goes till the android logo and then it just stays there, I cant go into a recovery Mode I tryed a lot of combinations, Power and the sound+- buttons (it has no more buttons than this 3). Now my question is can I do Something ? Can I make a new fresh Android version on this Tablet using my PC ? Or is there another way to rescue the tablet, pls help me guys
XDA Visitor said:
Hey Guys, I have a problem. I got an Chinese or something like that lol^^, Tablet and it stucks in a Bootloop or something like that, when I start it , it goes till the android logo and then it just stays there, I cant go into a recovery Mode I tryed a lot of combinations, Power and the sound+- buttons (it has no more buttons than this 3). Now my question is can I do Something ? Can I make a new fresh Android version on this Tablet using my PC ? Or is there another way to rescue the tablet, pls help me guys
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Now you have me curious as to the name of the tablet!
Without knowing the device name (because there is a myriad of things one can do, but only a small handful for any particular device), all I can do is point you to the direction of the [Ask Any Question][Newbie Friendly] thread of the > Android Development and Hacking > Android Q&A, Help & Troubleshooting forum.
Just so you know, in order to get any useful help, they will need to know as much info about the tablet as you can dig up (make and model number are good starters).
Hope this helps, and good luck!

Categories

Resources