So, I fudged up here. I installed a BUMPed KK bootloader thinking my kernel and recovery were BUMPed. Was using Render Kernel, turns out the Lollipop version is BUMPed, not KK. Good job, me! Got secure boot error loop and I still had TWRP, so I flashed the JB baseband. No boot. Tried to restore a backup I had (Mahdi + Render). No boot. Well, might as well use LG Flash Tools to go back to stock. Like I haven’t done it 80 times before….Failed! Failed! Failed! . . . Failed! (I can’t remember how many times I’ve tried).
I’ve tried every which way and LG Flash Tool gives me this:
PID: NULL
IMEI: NULL
Model :
DLL : D800
BIN : LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot
SWV :
SWOV :
Model Information Check FAIL!
00000000
So, am I royally screwed?
Si me lo puedieran explicar en español mejor:l
No there there any issue about it
drago10029 said:
You could possible be roayll screwed lol. i've recovered from potential bricks before but yu have to be willing to read a lot and learn stop trying things out unless you're sure they can help lol and since I'm not a G2 expert you can check here and get the best possible help ever! http://forum.xda-developers.com/lg-g2
hope that helps.
Click to expand...
Click to collapse
No there there any issue about it
Hi
Thanks for writing to us at XDA Assist. I can see you've also asked the same question here:
[Q] LG G2 Unbricked ( Model Information Check FAIL! )
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. Your other thread is in the best place for your question so this thread is closed.
Related
Please Help me.....................
I have IM-A890K, with kitkat 4.4.2 installed, but i flash it with Rom A890VN_VEGA_OS_RC2.zip with TWRP recovery, Rom installed sucessfully but after that I could not boot in recovery, just fastboot comes everytime when i try to flash it again i get the message
downloading boot.img.......
ok
booting....................
failed <remote: dtb not found>
finished
fastboot also failed
FAILED <remote: it is not support in user builed.>
i also tried by PDL Download but failed
MOdel name is also changed like this
Model Name - IM-A890S (but my actual model is IM-A890K)
Firm Ver - S0222208
eMMC revision - 0.3 (0x3)
Please Help me how can I solve this problem?????
Hi,
I appears to me that you may have flashed something not made for your specific model. Seeing as your model number is different now. Flashing anything not made for your specific model and device can often cause issues, some very serious ones.
Unfortunately I can't find any relevant threads on your device, so asking for help here would be best,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
hi guys i wanna flash my moto g from 4.4.4 on 5.0.2 but while i did it get these errors
hab check failed boot and recovery
and I can't flash it.
so how can solve this prablem?
i search all thread but i dont found how to solve it
excuse me for start new typic
Some more infos?
Hi mrhamid,
don't know if your thread is still alive....in case it is:
What model do you use (3G or 4G ) Xt1032 etc. ? How did you do flashing (procedure!)?
This title appears already here:
http://forum.xda-developers.com/moto-g/help/help-hab-check-failed-recovery-boot-t3043572
(solution included).
Does this help?
I also had this message serveral times without preventing me from successful flashing....
cheers
While I was in my Team Win recovery in the section Advanced wiping I deleted everything even the system. Now my Moto X 2013 bought in France doesn't turn on anymore, it just displays the warning page that informs me that my bootloader is unlocked, from there I can just go in the recovery. I tried to reflash the stock french room of Android 4.4 (that I have already flashed successfully a while ago) from AP Fastboot using RSD lite, but this time it didn't work, on my phone is displaying this error:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT.
:crying:
I have searched on google if someone had this problem too and I have found that it is due to when you want to pass from a newer version of android to an older one for exale from 4.4 to 4.2 . I think this is true because before I wiped everything I had android lollipop 5.1 and now I am trying to install android 4.4 . If you agree with me and think that it is the problem could you please tell me where I can get the zip file of Android 5.1 (the file of the firmware) that I will have to install using AP Fastboot?
PS: Sorry for my bad English
Thank yo very much.:fingers-crossed:
Hi, thank you for using XDA Assist. i see you've posted here also, http://forum.xda-developers.com/mot...x-question-t3032022/post61552796#post61552796 That is the best place to ask. Our mission at XDA Assist is to get you to the best place to get your question answered. We are not a technical support center. Since you've asked your question in the Moto X forum I'm going to close this thread.
Hi, good day and thank you for reading.
I'm stressed out. I need any help I can get, what's happening is that I bought two phones in attempt to refurbish it and it came with errors. Whenever I try to update it I get " Status 7 ; installation aborted ) along with many other stuff. Additionally, the device I bought was supposed to be unlocked but guess what. It isn't . ( also not sure if rooted but i assume its not )Please help in anyway possible.
I'm not a phone tech but I know my way around. It's two devices, both from sprint.
Device 1: SPRINT sph l720 )- this is unlocked. Only need to probably flash my device and put lollipop on it. It's currently 4.4.2 kit kat but when I download and go through with the update, status 7 installation aborted. This brings me to my next issue. My baseband number is different from the lollipop rom that I'm finding online. Should this be an issu? baseband number- L720VPUAMDC.(will flashing make the phone locked to sprint again?)
Device 2: SPRINT sph l720T.(Baseband : l720TVPUBOA3)- This is locked and won't update. Same error as mentioned above. (Sprint spark)
It would be nice if someone could carry me through the steps I'd need to fix this (flashing to lollipop and unlock or any other method to be honest. I'd just like to overcome this issue as soon as possible to sell these devices)
And thank you thank you thank you in advance for the assistance. I really needed it.
XDA Visitor said:
Hi, good day and thank you for reading.
I'm stressed out. I need any help I can get, what's happening is that I bought two phones in attempt to refurbish it and it came with errors. Whenever I try to update it I get " Status 7 ; installation aborted ) along with many other stuff. Additionally, the device I bought was supposed to be unlocked but guess what. It isn't . ( also not sure if rooted but i assume its not )Please help in anyway possible.
I'm not a phone tech but I know my way around. It's two devices, both from sprint.
Device 1: SPRINT sph l720 )- this is unlocked. Only need to probably flash my device and put lollipop on it. It's currently 4.4.2 kit kat but when I download and go through with the update, status 7 installation aborted. This brings me to my next issue. My baseband number is different from the lollipop rom that I'm finding online. Should this be an issu? baseband number- L720VPUAMDC.(will flashing make the phone locked to sprint again?)
Device 2: SPRINT sph l720T.(Baseband : l720TVPUBOA3)- This is locked and won't update. Same error as mentioned above. (Sprint spark)
It would be nice if someone could carry me through the steps I'd need to fix this (flashing to lollipop and unlock or any other method to be honest. I'd just like to overcome this issue as soon as possible to sell these devices)
And thank you thank you thank you in advance for the assistance. I really needed it.
Click to expand...
Click to collapse
Hi, thanks for using XDA assist! First, please create an account, then ask your question here:
http://forum.xda-developers.com/showthread.php?t=2192886
Your device experts are located there and will be able to help.
Hello all. I have an LG G3 d851 that came with Android 5. Recently I acquired the d85130e official ROM (.zip) and flashed it with our loyal and trusted friend TWRP recovery. Sadly I lost root and TWRP in the process but everything else was smooth. After some research I learned from an XDA post that the only of re-rooting was was downgrading. So I got me a new friend, LGUP tool, I downloaded D85130d_00_0404.kdz to flash with LGUP. While flashing, in the middle of the process (about 51% of overall progress) the "friend" shows me an error: "Incorrect Porotocol: LAF version 0x100004 // DLL version 0x100001" and voilá! I am now phone-less. The phone only enters "Firmware Update" screen and ignores any Hard Reset requests (probably due to non-existing or corrupt system partition). I've downloaded a variety of DLL's supposedly for d851 but none have helped. Please Save My Soul!!
Hello and welcome to Assist
Sorry but I could not find any info/solution on the problem youre facing so please post in your device help section linked below
Hopefully someone may have a solution
https://forum.xda-developers.com/tmobile-lg-g3/help
Good luck