Database Info

XT925 become a Brick! Without trying anything!

Hi everyone!
Sorry to bother you but my sister in lay has a big problem and her XT925…it become a brick over night!!
The phone wasn´t rooted o even had the bootloder unlock!
When we turn on the phone, it loads the Motorola logo and wont continue.
I tried to flash it but can’t make it throw.
We are from Argentina and use Personal as a carrier.
These were the thing I try (all in AP FASTBOOT… Device is LOCK. Status Code 0):
First:
I download a firmware (9.8.2Q-50-XT925_VQLM-20_Personal_AR_SIGNED_S12_USAVANQUPERARLA01F.0R_VANQJBPERARLA_P006_A007_CFC_fb.xml) and use the RSD 6.1.4 but fail. In the phone, had the following error:
“downgrade security version
Update gpt_main version faild
Prefash validation failed for GPT”
Second:
Using the same firmware and RSD, I erase the following line “<step operation="flash" MD5="68b23ea5ffaeb78ee66580697dd07cad" filename="partition_signed" partition="partition"/>” and had a different error:
“invalid image size for partition tz”
Third:
I download a new firmware (XT925_rcica-user-4.4.2-KDA20.117-3-4-release-keys-cid14-RCI-CA.xml”) and try the fastboot.
Got the following error:
“failed to hab check for boot 0x56 preflash validation failed for boot”
(same error using the RSD)
Fourth:
I try to use the motopocalypse but nothing happened…
Can anybody help me? I run out of option!
Thanks!!

Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Motorola Droid RAZR HD
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
RAZR HD Q&A, Help & Troubleshooting
Good luck!

Thanks for been so kind!!
Hope someone can help me.
Last night i try to get the unlock code from the motorola page but keep geting "your imput text was not recognized as a valid dataset. please try again" when entering the ID digits!
I´ll keep trying and let you know if a get a different result!
Thanks

Solve!!!!
I load again the page of motorola y was able to get the unlock code!
Once the phone was unlock, I loaded the firmware XT925_rcica-user-4.4.2-KDA20.117-3-4-release-keys-cid14-RCI-CA.xml using fastboot.
Thanks and hope i can help somebody with the same issue!!

[Completed] LG G2 Unbricked ( Model Information Check FAIL! )

So, I fudged up here. I installed a BUMPed KK bootloader thinking my kernel and recovery were BUMPed. Was using Render Kernel, turns out the Lollipop version is BUMPed, not KK. Good job, me! Got secure boot error loop and I still had TWRP, so I flashed the JB baseband. No boot. Tried to restore a backup I had (Mahdi + Render). No boot. Well, might as well use LG Flash Tools to go back to stock. Like I haven’t done it 80 times before….Failed! Failed! Failed! . . . Failed! (I can’t remember how many times I’ve tried).
I’ve tried every which way and LG Flash Tool gives me this:
PID: NULL
IMEI: NULL
Model :
DLL : D800
BIN : LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot
SWV :
SWOV :
Model Information Check FAIL!
00000000
So, am I royally screwed?
Si me lo puedieran explicar en español mejor:l

No there there any issue about it
drago10029 said:
You could possible be roayll screwed lol. i've recovered from potential bricks before but yu have to be willing to read a lot and learn stop trying things out unless you're sure they can help lol and since I'm not a G2 expert you can check here and get the best possible help ever! http://forum.xda-developers.com/lg-g2
hope that helps.
Click to expand...
Click to collapse
No there there any issue about it

Hi
Thanks for writing to us at XDA Assist. I can see you've also asked the same question here:
[Q] LG G2 Unbricked ( Model Information Check FAIL! )
Please refer to the XDA Forum Rules for information regarding the creation of duplicate posts/threads. Your other thread is in the best place for your question so this thread is closed.

[Completed] [Q] Error while flashing stock rom on my Moto x 2013

While I was in my Team Win recovery in the section Advanced wiping I deleted everything even the system. Now my Moto X 2013 bought in France doesn't turn on anymore, it just displays the warning page that informs me that my bootloader is unlocked, from there I can just go in the recovery. I tried to reflash the stock french room of Android 4.4 (that I have already flashed successfully a while ago) from AP Fastboot using RSD lite, but this time it didn't work, on my phone is displaying this error:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT.
:crying:
I have searched on google if someone had this problem too and I have found that it is due to when you want to pass from a newer version of android to an older one for exale from 4.4 to 4.2 . I think this is true because before I wiped everything I had android lollipop 5.1 and now I am trying to install android 4.4 . If you agree with me and think that it is the problem could you please tell me where I can get the zip file of Android 5.1 (the file of the firmware) that I will have to install using AP Fastboot?
PS: Sorry for my bad English
Thank yo very much.:fingers-crossed:

Hi, thank you for using XDA Assist. i see you've posted here also, http://forum.xda-developers.com/mot...x-question-t3032022/post61552796#post61552796 That is the best place to ask. Our mission at XDA Assist is to get you to the best place to get your question answered. We are not a technical support center. Since you've asked your question in the Moto X forum I'm going to close this thread.

[Completed] Invalid IMEI problem on Symphony Xplorer W69Q after installing Custom ROM. Help plz.

Hello,
I have ran into a problem. I am using Symphony Xplorer W69Q and I was looking for a custom ROM. I was liking mostly MIUI. So I have contacted them and asked if there has any Custom ROM for my device. They told me that there has not any ROM for my device. So I have searched on google for any other custom rom and get one of MIUI 7-
So I have decided to make a try.
One I have collected Philz touch recovery and flashed the ROM, I have lost my IMEI. I didn't take a backup of my current ROM too. Finally I have no way to get SIM card working as they are no longer being detected.
I think I made the mistake by wiping the cache and also dalvik cache as per their silly instruction. I have installed the ROM successfully and there have not any other bug except the SIM card/IMEI error.
When I press *#06#, I get-
IMEI1- Invalid
IMEI2- Invalid.
Then I flashed the following Stock ROM using SP Flash Tool
(Symphony_W69Q_1_FL_V03.0_V1.0)
But still I can't get RID of the Invalid IMEI problem.
I also tried to use the SN writer tool. But I couldn't find the database file listed here
androidmtk[dot]com/use-sn-write-tool
(I couldn't get any file of MDI_DB and AP_DB in my stock ROM)
Also tried this tutorial
on Youtube-
Android phone invalid imei repair
by Azeem Md
But it not also worked for me. I couldn't find the database file for my Phone.
So I am still stacked on Invalid IMEI problem. I also tried Chamelephon.apk and Engineering mode in MIUI 7. But there the CDC Information can't be selected because it is grey there.
So is my phone dead now????.
Please anyone help me by providing me a working solution with necessary file download link.

Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there will be able to help you.
Best regards & good luck
Trafalgar Square
XDA Assist

Help: FreeTel Samurai Kiwami FTU152D

Greetings for all xda members,
I need your generous support regarding my Freetel Kiwami FTU152D.
It was working well on android 5.1 but i made a blunder by flashing a custom android 6.0 rom from needrom.com made for FTJ152D. I supposed that the FTU152D is having same hardware as FTJ152D , and its just and american version of the Japanese model.
But unfortunately things went wrong and i phine lost the IMEI after flashing.
Steps done to restore/Write IMEI:
1: Engineering mode:
CDS information is not available in engineering mode, tired to install CDS but failed.
2:Maui Meta Mode:
Phone reboots and doesnt enter inter meta mode.
3: SN Writing tool:
Phone simply reboots and fails to write the IMEI.
4:Rooting
almost all android and PC rooting apps(Kingo,King,Farmaroot, Root Genious etc.) failed to root the device.
please guide me how to get the IMEI working on android 6 or how can i got back to stock android 5 rom, haven't find and stock rom yet.
looking forward to experts opinion.
thanks.