Database Info

[Q] Celkon A119Q - Hard Bricked my Daughter's Phone :( Help

Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.

Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...

N'ayam Amarsh'e said:
Can't figure out, What you mean by a 'Preloader' but looks like you've bumped...
Click to expand...
Click to collapse
he was trying to install a custom ROM and flashed the PRELOADER first...the process stopped halfway through and the phone has been bricked ever since.. :crying:

rakave said:
Dear Sirs,
My daughter is using a Celkon A119Q HD (Stock Rom is available needrom ). The device uses a MTK6589.
Recently, my friend flashed the wrong preloader on my phone and hard bricked it. Currently it doesn turn on, no display nothing. Me being an idiot did not take a backup using MTK droid tools and I dont have CWM recovery on my phone. So I decided to flash my phone with the stock rom.
I have installed all the necessary drivers and When I connect my phone to SP Flash tools, it is able to identify it. It says "Mediatek DA USB VCOM (Android) (COM5)". However I am unabe to flash it at all. I have tried format, format without boot loader, firmware->upgrade, format all + download, download only and even ran a memory test.
Absolutely nothing seems to work. I have attached the various screenshots of the error messages I get.
I would deeply be in your dept if you could kindly help me and guide me as to what I should do next Sir, since my daughter has been giving me hell over her phone.
:crying:
Thank you very much for the help. I sincerely appreciate it.
Click to expand...
Click to collapse
did you try to restock it.. installing a stock rom is the last option if available.. if the phone is not even turning on, check battery.. make sure your battery is charged..
and at last.. you could just try taking it to the service center if it's in warrenty.. but make sure it doesn't turn on.. don't tell them you were flashing.. they will never know.. hope it help in any way..
btw check out my signature...

[Q] MTK preloader port is gone!!! Replaced by MTK USB Port.?

Hello there!
So here goes my problem: The thing I was trying to do> Flashing a random rom in my MTK6582 device. Why random? Because I was unable to find my official ROM on internet. I thought if I flash any random ROM having MTK6582 device, It would work, which resulted in my current despo situation. No boot, No Logo, Nothing. The thing that triggered this was none other than "FORMAT" button from SP FLash Tool. Yup. Beforehand, I could at least enter in Bootloop and Recovery Mode. So is there anything which could be done except changing motherboard or force booting with JIG. As I said, it still shows "MTK USB Port" when I connect my phone w/o battery, however, Preloader is no longer appears. One more thing, it's not disappearing after 2 seconds as it did with preloader. Please, save my bud!!!
Device Name: Qmobile Linq X70, MTK6582, ARMv7 Quad Core 1.3GHz, KitKat 4.4.2

deoryus said:
Hello there!
So here goes my problem: The thing I was trying to do> Flashing a random rom in my MTK6582 device. Why random? Because I was unable to find my official ROM on internet. I thought if I flash any random ROM having MTK6582 device, It would work, which resulted in my current despo situation. No boot, No Logo, Nothing. The thing that triggered this was none other than "FORMAT" button from SP FLash Tool. Yup. Beforehand, I could at least enter in Bootloop and Recovery Mode. So is there anything which could be done except changing motherboard or force booting with JIG. As I said, it still shows "MTK USB Port" when I connect my phone w/o battery, however, Preloader is no longer appears. One more thing, it's not disappearing after 2 seconds as it did with preloader. Please, save my bud!!!
Device Name: Qmobile Linq X70, MTK6582, ARMv7 Quad Core 1.3GHz, KitKat 4.4.2
Click to expand...
Click to collapse
Actually, your shouldn't have done it, since as far as I have searched, I didn't find any Flashable stock ROM for your phone.
Flashing some other device's ROM will never work, since the mount points will be completely different even if you flash ROM of same chipset.
The only solution for this is waiting for someone to post flashable stock ROM for your phone, or finding someone who has the same phone and asking them to dump the ROM completely and give it to you, or the best way: Go to Service Center

Try flashing any flashable custom/stock rom if available for your device, and if not then u can use it as paperweight. And service center might not able to help as ur preloader is corrupted.

GokulNC said:
Actually, your shouldn't have done it, since as far as I have searched, I didn't find any Flashable stock ROM for your phone.
Flashing some other device's ROM will never work, since the mount points will be completely different even if you flash ROM of same chipset.
The only solution for this is waiting for someone to post flashable stock ROM for your phone, or finding someone who has the same phone and asking them to dump the ROM completely and give it to you, or the best way: Go to Service Center
Click to expand...
Click to collapse
Well, my uncle have same phone. Is it possible to extract a flashable ROM from his device?

deoryus said:
Well, my uncle have same phone. Is it possible to extract a flashable ROM from his device?
Click to expand...
Click to collapse
Yes, you can.
This will help: http://www.theandroidhow.com/2014/05/how-to-backup-rom-dump-mtk-android.html
It's quite difficult for a beginner.
Going to Service Center is the best way as I said.
Don't brick your uncle's phone too trying to save yours.
The choice is yours now

My new tecno 7C android 5.0 is brocken! Help please...

Hello elders. I hope that I'm in the right session for my ask. I have tried to update my tecno 7c android 5.0 based tablet (that I've bought, just a month ago) cause it proposed it to me in the settings, software update option. Everything went well till the end of the download. After that, my tablet rebooted correctly and came to the android home screen. But each time I put any SIM card inside, I always have this message: "com.phone stopped working". I've tried to perform a full reset of the phone through the stock recovery but I don't even have access to recovery now. The phone is MTK 6582 processor based tablet. I've tried to read on internet to see if there's a way to fix it but the one I've found explained that I need a same working tablet whose backup file I'll flash on the bricked one through SP FlashTool to revive it but I have nobody having such tablet. Help please if you have solutionq for me. Very urgent. My tablet, the only on I have! Thanks in advance.

Hello! Nobody to answer me?

[Completed] PLEASE HELP Hard Bricked Jiayu S3 Advanced

Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance

rudycroes said:
Hi All,
This is my first post, so take it easy on me pls..
I need help flashing a hard bricked phone.
The phone wont turn on and when i flash a rom, after
20-55 seconds with a 100% red bar i get a brom error 4032.
I have a Jiayu S3 Advanced mtk6752 shipped with kitkat
And i flashed a android 5.0 stock rom with sp flash tool.
After not using for a while and replacing a cracked screen. My phone restarts itself and it was soft bricked.
Then i flashed the wrong rom it was a rom for Jiayu S3+ mtk6753 and now its hard bricked. I did everything i can find on the internet except making a jumper on the motherboard. Please help.
Let me explain what exactly happended.
I bought the china phone and on the first day that i got it i flashed a android lollipop 5.0 stock rom with sp flash tool. After that i used it for a month or so. Then i cracked the screen and the screen wasnt responding. After 3 months not using the phone i ordered a new screen with lcd and i replaced it.
I used the phone for 2 days and suddenly the phone restarts itself when i was playing music. After restart i was stuck on the logo. After restarting the phone again it was again stuck at the logo.
I tried to flash my phone again, but used the wrong rom.
It was a Jiayu S3+ mtk 6753 android 5.1 lollipop stock rom. I tried everything reinstalling drivers with usbdeview and device manager. Tried flashing different. Stock roms. Tried different key combinations. Sp flash works and can see the phone when flashing a rom but stops after 20-55 seconds with a 100% red bar and a brom error 4032 pops up. I saw on the interwebs that i make a jumper on my motherboard but i cant find lcolo or something like that. Please help..
Thank you in advance
Click to expand...
Click to collapse
Hello,
Please try posting your query here Ask any Query Newbie friendly with all relevant details, the experts there maybe able to assist you.
-Vatsal

[Completed] delicious matter !help me! my bricked device keeps re/disconnect with my pc quickly

:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .

mohamed thebear said:
:silly: delicious matter for xda-developers [!!help me!! my bricked device keeps reconnect and disconnect quickly 3 sec with my pc ;so I can't restore stock rom on my device]
hi guys,since two day I've flashed my device with wrong rom :angel:{I'm not know about flashing wrong rom because I browsed a lot of porting roms subject in some forums then I've become able to flash my device and I've knowledge about this operating but I believed like this "now I owned the world " :laugh:after installing custom recovery cwm and backuping overall the device}.
however I flashed three rom adapted with my tablet before porting the wrong rom.
in abbreviately,after wrong rom the tablet is in boot loop 5 sec and restart,is it stuck in manufacture lego
which are mayhem picture after flashing the wrong rom then restart again .
I try and try again to booting into custom recovery
but is unuseful the tablet not reach custom recovery with pressing (vol.up button +pwr.button)
or reach factory mod with pressing (vol.down button+pwr buttton).
now,I try to fix the problem when connect the tablet with my pc via usb cord
,my bricked device reconnect & disconnect with pc quickly almost 3 sec ,usb cable otg is perfect functional though
is it occurring (I able to driving the tablet but I am not able to flashing with flashing tools such as : sp flash tool & mtkdroid tools)
the trouble is not fix when pressing (vol.up or vol.down or both these or both these with pwr or pwr alone ) before plug otg cable with my pc.
I searched and watched solved mtk problem on youtube but my trouble is not similar anything of this problems
and nothing about this on sites and forums.:crying:
in addition to :
I disassembly the case of my tablet and disconnect the battery connection with tablet motherboard
but same result.
!!!!please tell my how to fix this trouble!!! and able to flash stock rom
detail device
name :CCIT A799W (china tablet)
cpu :mediatek 6572
intsd: 8G
RAM : 1g
ANDRO: 4.2.2 (jellybean)
board: HX-M706-MB-V1.1.0
N.B: the wrong rom is Lollifox_MT6572_Kitkat_Ajit_mtkroms-com exactly. they say: for mt6572 only (not mt6572 running kitkat )
for more info tell me and good luck for every body .
Click to expand...
Click to collapse
Greetings,
Thanks for using XDA Assist.
There are no specific forums for your device so I ask that you post your questions here:
Android Q&A, Help and Troubleshooting
The experts you'll find there may be able to help you.
Good luck!