Related
Welcome to AmatROM series.
Information:
I cooked a Touchwizzed Rk30sdk ROM.
Simply the best ROM for Samsung lovers.
WizzRK stand for Touchwiz for Rockchip.
"WizzRK = Wiz + Rk"
The ROM was tested on a Moroccan Tablet: Yooz MyPad 750 HD. Google it to compare its specs to your tablet's ones. It similar to Prestigio PMP5870C_DUO at 100% but I can't guarantee it will work on this since anything for this tab didn't work on the Yooz.
Disclaimer:
This is ROM made by a Linux Amateur and NOT a High Level Developer.
So you may some bugs. However, I am using it since longtime with no issue.
KEEP IN MIND I AM NOT RESPONSIBLE IF YOU MAKE YOUR TAB UNUSABLE FOR A LIFE TIME !
Features:
The ROM is:
- Fully Samsungnized
- Rooted
- Zipaligned
- Init.d support
- GPU Touch Rendering
- More RAM available
- Samsung Galaxy S4 Bootanimation
- Samsung Galaxy Note 8.0 sound
- Samsung Galaxy Note 8.0 Wallpapers
- Latest Busybox
- SQLite3 Support
- More.....
Downloads:
Download there ROM here Mediafire (487MB)
Mirrors NOT allowed please.
Installation:
Instructions are included in the package.
- Download and Extract the package.
- Open RockDevelopTool folder and open up RkAndroidTool
- Put your Tablet in Flash Mode (Read instruction in package for more info)
- When your is detected, Click "EraseID"
- Finally Click, "Run"
- After the process is completed, the device should boot automatically.
Bugs:
- Touchwiz in landscape is a bit buggy
Q/A ~FAQs:
1) Your Tablet display a blackscreen and nothing more ?
- Replace "Boot.img" with your tablet's one.
2) Your tablet goes into a bootloop ?
- Replace "Boot.img", "kernel.img", "Loader.bin", "Misc.img" "Parameter" and "Recovery.img", with the ones from your TAB. Just be sure your tablet's kernel is a 3.0.36+ one.
3) Do you get a "Problem loading widget" error and Touchwiz force close ?
- Get root file explorer (Root Explorer for example) and go to /system/app then copy everything in ".temp" folder. Now paste them to "system/app", replace if prompted. Now reboot. If still not working, leave a comment below.
4) You found the process too complicated and you can't flash the ROM ?
- Sent me your tablet and I will flash it for you :silly:
5) Your Tablet is completly dead and you cannot succeed flash the ROM again and again ?
- Restore it with your backup or an official firmware for it.
Screenshots:
Contributors:
@Nonta72
@Aeyan Ashraf
Just in case
Note: For Marshmallow release and information please go HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
YOU MUST BE ON THE ASUS STOCK JB 4.2.1 BOOTLOADER VERSION 10.6.1.14.10 AND TWRP 2.7+ OR CWM 6.5.0.0+ BEFORE FLASHING THIS ROM. SEE UPGRADE INSTRUCTIONS BELOW IF YOU ARE UNSURE
You must do a full wipe in recovery if coming from another ROM. Do not do a full wipe from the bootloader. Don't forget to do a Nandroid Backup first and give the ROM 15 mins to stabilise! The first boot will take 15 minutes!
Features and Tweaks
This ROM is based from OMNI AOSP sources
Supports EXT4 and F2FS Data partitions
Based off omni-5.1.1-20150526-zombi_tf700t-KANG source by lj50036/hardslog
Full Aroma Installer for main rom including choice of 3 kernels and ROM2SD/DATA2SD/F2FS support
Remixed _thatv11 kernel with OMNI ramdisk - repacked by sbdags
Grimlock kernel with OMNI ramdisk and _that init - by hardslog
Omni Kernel with _that init - by hardslog/lj50036/sbdags
DPI Size: 213 (TF700 recommended small fonts), 240 (Stock fonts), 224 (Medium fonts) & 200 (Small fonts), 180 (Tiny fonts) & 160 (Specsavers fonts)
Launchers: Omni, Google Experience Launcher, Apex , Nova
Boot Animations: ZOMBi-POP, Android-L, Nexus Phase Beam
Gapps (updated by me to Google latest apks and libs)
Misc Apps: ESFile Explorer, Adobe Flash, AdAway, Titanium Backup, Keyboard Manager
Tweaks: File system and performance optimised, Init.d support, Zip Align, Force GPU Rendering, Browser2RAM
Continued Best Support of any ROM!
Warning - experimental tweaks
[*]Option disable data journaling on /data during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Option disable fsync during install - CAN CAN CAUSE DATA LOSS IF SUDDEN SHUTDOWN OR CRASH
[*]Tip 1: Go to Settings - About Tablet, Click build number 7 times
Now you will see Developer Settings & Performance menus
[*]Tip 2: In Developer Settings - Set Animation and Transitions to 0.25 or 0 for extra free speed!
[*]Tip 3: In Performance Settings - Set CPU max speed to at least 1.6GHz, I/O scheduler to noop and Governor to Performance or On Demand
Bug List
[*]No Floating windows yet
Change Log
20151210 ZOMBi-POP 5.1.1 RC2 changes
- Fixed RC1 missing ZOMBi Tweaks that bring performance back
- Added Lockscreen rotation - thanks lj50036
- Rebased off omni-5.1.1-20151206-tf700t-tf300-NIGHTLY by lj50036/hardslog/scanno
- Tweaked windows max events back to 60 (reduces CPU heat)
- Added Marshmallow boot animation
- Updated Browser with speed and touch tweaks
- Updated Google Play Store to version 6.0.5
- Updated Google Play Services to version 8.4.89
- Updated Google Search to version 5.6.24.19
- Updated Google Calendar to version 5.2.7
- Updated Google Mail to version 5.8
- Updated Google Hangouts to version 6.0
- Updated Google Maps to version 9.18.2
- Updated Google Street to version 2.0.0
- Updated Google Music to version 6.1.21116T
- Updated Google TTS to version 3.7.12
- Updated Google News and Weather to version 2.5.2
- Updated ES File Explorer to version 4.0.3.1
- Updated YouTube to version 10.43.60
- Updated Nova Launcher to version 4.2.0
- Removed Dock Battery as no longer compatible and causes stability issues
20150726 ZOMBi-POP 5.1.1 RC1 changes
- RELEASE CANDIDATE 1!
- Fixed the problem with ROM2SD and DATA2SD not working correctly on beta 4
- Added SuperUser and Secure Kernel as options to the installer (Turn these off for work wifi or watching sky go, etc)
- Added dock battery icon as an option to the installer under tweaks
- Fixed partitions not getting unmounted correctly for tuning during installation
- Fixed WiFi across the unified bases for TF700/TF300/TF201
- OmniSwitch now working - thanks hardslog
- Tidied up some installer messages
- Google play services updated to unified version for all devices
- Updated Google Maps to version 9.12.0
- Updated Google TTS to version 3.5.6
- Updated Google Calendar to version 5.2.2-98195638
- Updated YouTube to version 10.28.59
- Updated Apex Launcher to version 3.1.0
20150723 ZOMBi-POP 5.1.1 Beta 4 changes
- Unified Aroma installer for TF700/TF300/TF201
- Rebased from omni-5.1.1-20150718-zombi_tf700t-KANG maintained by lj50036, hardslog, sbdags
- Merged source from omni-5.1.1-20150718-zombi_tf300t/tf201t-KANG maintained by lj50036, hardslog
- Updated all kernels and modules to the unified versions - thanks lj50036
- Aroma re-written to allow multi device selection and detection
- Additional tweaks added from TF701 Zombi-pop
- Amended SuperSU installer script to give correct permissions and install locations
- Reverted to latest Banks Gapps - means another wipe - sorry!
- Updated Google Calendar, Google Mail, Google Hangouts, YouTube, Google Search & Google Maps to latest versions
- Updated ESFile Explorer and Nova Launcher to latest versions
- Added flashable zip to enable dock battery - NOTE - this means you can't change the battery icon
- Beta 3 unreleased
Older versions
20150531 ZOMBi-POP 5.1.1 Beta 2 changes
- Rebased from omni-5.1.1-20150526-zombi_tf700t-KANG maintained by lj50036, hardslog
- Merged Test Patch 1 in to main rom build
- Removed processor affinity queuing
- Dropped read ahead value to 256KB
- Cleaned up unnecessary init.d & addon.d scripts
- init.d scripts trigger 10 seconds earlier so wait time for response after a reboot is reduced
- Updated Gapps to latest Slim Gapps package - thanks Slim Team and raulx222
- Play Store updated to Multi DPI version
- Added Material Green theme to Aroma - thanks raulx222
- Updated SuperSU to version 2.49
- Removed Google Ears from package
- Updated ESFileExplorer to version 3.2.5.3
- Updated Nova Launcher to version 4.0.1
- Updated Apex Launcher to version 3.1.0
- Fixed Google Experience Launcher not appearing after first install
20150508 ZOMBi-POP 5.1.1 Beta 1 changes
- Rebased from omni-5.1.1-20150506-zombi_tf700t-KANG maintained by lj50036, hardslog
- Android 5.1.1!
- Retweaked some File System and Virtual Memory parameters - focus on smoothness and battery
- Switched sbdags recommended options back to _that kernel - it works really nice with this version
- Viper4Android sound enhancer updated to lollipop version + updated the audio_effect.conf file
- Updated Google Play Store to version 5.5.8
- Updated Google Play Services to version 7.3.29
- Updated Google Search to version 4.5.13.19
- Updated Google Maps to version 9.8.1
- Updated Google Hangouts to version 3.2.91698097
- Updated Google Play Music to version 5.9.1854R
- Updated Google Calendar to version 5.2-91668080
- Updated ESFileExplorer to version 3.2.5.1
- Fixed swipe gestures on google keyboard
- Fix for Battery Drain on Google Play Services
- Removed Titanium Backup from the zip file
20150422 ZOMBi-POP 5.1 Beta 6 changes
- Rebased from omni-5.1.0_r5-20150420-zombi_tf700t-KANG maintained by lj50036, hardslog
- New base is from OMNI 5.1.0_r5 merged by lj50036
- Browser History is back again! Thanks hardslog
- Updated Google Maps to version 9.7.1
- Updated Google Search to version 4.4.11.16
- Updated Google Mail to verison 5.1.90765967
- Updated Google Calendar to version 5.2-90091543
- Updated Google Hangouts to version 3.1.89134953
- Updated Google Text-to-Speech to version 3.4.6.1819666
- Updated YouTube to version 10.14.56
- Updated ESFileExplorer to version 3.2.5
- Updated Android Terminal to version 1.0.70
- Updated Banks Gapps:
- Google Play Services 7.3.28 (1863718-438)
- Google Play Store 5.4.12
20150415 ZOMBi-POP 5.1 Beta 5 UNRELEASED
- Rebased from omni-5.1-20150413-zombi_tf700t-KANG maintained by lj50036, hardslog
- Fixed the issues with no gapps option crashing the installer
20150406 ZOMBi-POP 5.1 Beta 4 changes
- Repacked _that's kernel with an attempt to solve heat issues - I think I know what it is
- Tweaked the cpu settings so it should try to go to all cores slightly quicker
- Fixed _that OC to 1800MHz on internal/data2sd installs
- Fixed GAPPS to /data partition not working correctly
- Removed GAPPS to /data option as GAPPS only work on /system
- Installer now removes redundant GAPPS folders on /data if you used the beta 3 installer
- Updated Google Play Store version 5.4.10
- Added Aroma code to remember previous selections as well as offer various installs
- sbdags best auto install, omni default auto install, previous options and previous auto install
- Getting closer to RC1!
20150404 ZOMBi-POP 5.1 Beta 3 changes
- New Grimlock and Lite Kernel versions by hardslog for 5.1
- New Omni base kernel by lj50036/hardslog/sbdags - default is 1.4GHz
- Fixed issue with not being able to disable OC on _that kernel
- Fixed Setup Wizard crash
- Removed balanced CPU options from Aroma for _that kernel as we only have perf mode now
- Set F2FS user to default choice in Aroma - you should move if you haven't
- Added NEW Options to Aroma for GAPPS
- You can now choose to install GAPPS to /system or /data, no GAPPS or minimal GAPPS (just playstore and syncs)
- Brand new 5.1 GAPPS package from Banks used
- Google Play Store updated to version 5.3.6
- Google Play Services updated to version 7.0.99
- Updated Google Mail to version 5.1.89985675
- Updated Google News and Weather to version 2.3
- Updated Google Maps to version 9.6.1
- Updated Google Text To Speech to version 3.4.5
- Updated YouTube to version 10.11.55
- Updated Terminal Emulator to version 1.0.69
- Removed Keyboard Manager as it no longer works on Lollipop
20150322 ZOMBi-POP 5.1 Beta 2 changes
- Rebased from omni-5.1-20150320-zombi_tf700t-KANG maintained by lj50036, hardslog, ikkeT and sbdags
- Adaptive brigtness fixed and values changed
- Browser speed tweaks incorporated into source
- OmniSwitch updates
- Settings changes to alarms and notification interruptions
- Updated Google Music to version 5.8.1836R
- Removed Titanium Launcher - as it needs to be installed form the store now
20150315 ZOMBi-POP 5.1 Beta 1 changes
- Rebased from omni-5.1-20150313-zombi_tf700t-KANG maintained by lj50036 & harslog
- Testing Aroma 3.00 scripts from Amarullz
- Repacked omni / _that kernel with preinit init binary
- Updated YouTube, Hangouts, Google Search, Calendar, Maps to latest 5.1 versions
- Updated Google Play Store and Services to 5.1 versions
- Updated Apex Launcher to version 3.0.3
- Recompiled Browser.apk with speed tweaks
- Moved tibu to system to try and fix install issues
- Shrunk all gapps by removing duplicate lib files from binaries
20150217 ZOMBi-POP Beta 10 changes
- Rebased from omni-5.0.2-20150216-zombi_tf700t-KANG maintained by lj50036 & harslog :
- Show Optimizing app dialog on first boot
- Prevent copyNativeLib of package scanning to reduce booting time
- Keyguard: don't refresh ui when screen off which causes high power when screen off
- Prevent App Not Responding when broadcast receiver is killed
- lowmemorykiller: Fix high min-free values
- Removed my minfree init.d script to test new default values
- Changed the interactive governor tweaks to help battery life and heat
- min_sample_time from 40000 to 10000
- go_maxspeed_load from 90 to 98
- max_normal_freq from 1500000 to 1300000
- midrange_freq from 760000 to 1150000
- Updated SuperSU to version 2.46
- Updated Apex Launcher to 3.0.2
- Updated Google Maps to version 9.4.0
- Updated YouTube to version 10.05.6
20150212 ZOMBi-POP Beta 9 changes
- Rebased from omni-5.0.2-20150208-zombi_tf700t-KANG maintained by lj50036 & harslog
- Rebuilt _that/omni kernel with oom patches and repacked ramdisk
20150207 ZOMBi-POP Beta 8 changes - not released
- Reverted some vm and kernel tweaks which seems to have got performance back on track
- Reverted read_ahead_kb to 4096 as no benefit to 2048
- Fixed Tibu not installing correctly and updated to version 7.0.0.2
- Removed Chrome and Dolphin / Flash
- Rebuilt all GAPPS from latest PA GAPPS modular package Feb 2015
20150201 ZOMBi-POP Beta 7 changes
- Resized Nexus-Lollipop bootanimation
- Added the Unknown Pleasures bootanimation
- Testing read_ahead_kb set to 2048 not 4096 to see if it improves read/write stabilty
- Aroma theme updated - thanks Shonkin for the bg picture
- Fixed Overclocking not working on data2sd with _that's kernel. You now get 4x1800 cores on data2sd
- CPU will use all 4 cores at 90% max load instead of 85% on basic cpu tweaks
- Fixed missing sdcardi on grimlock kernel
- Fixed init.d on Grimlock 5 kernel by repacking init.zombi.rc
- Fixed zipalign script so it runs properly once after a dirty or clean install
- Set the lowmemorykiller to less aggressive 2048,4096,8192,16384,24576,32768 via init.d script
- Rewrote Aroma installer which gets us a step closer to it remembering previous installs (but not yet!)
- Split out the extra tweaks into two parts for further debugging - Basic and Extended
- Spilt out Disable Software Rendering and Force GPU rendering for further testing
- Added 1760x1100 & 1440x900 as additional resolution choices
- Fixed resolution changes not getting applied by changing delay from 30 secs to 45 secs after boot finishes
- Reordered init.d scripts to make more sense
- Updated Titanium Backup to version 7.0.0 and cleaned up installation script
- Force GPU Rendering is not getting applied correctly - do it manually for now
20150131 ZOMBi-POP Beta 6 changes
- Added sysctrl to /system/xbin as the file was missing. This means a lot more tweaks get applied. Doh!
- A suspect for OOM errors is B2RAM so dropped memory usage to 50MB as a test
- Fsync is enabled by default if you select ROM2SD or DATA2SD in the installation process
- Updated zipalign script to work with Lollipop apk folder conventions
- Updated the Android Lollipop bootanimation with latest official google one
- Updated YouTube to version 10.03.5
- Updated Android Terminal Emulator to version 1.0.65
20150125 ZOMBi-POP Beta 5 changes
- Rebased from omni-5.0.2-20150125-zombi_tf700t-KANG source maintained by lj50036/hardslog
- Fixed Auto-rotation - thanks hardslog/lj50036!
- NEW Material AOSP Broswer - very nice!
- Omni Switch but no windows mode yet
- Fixed missing sdcardi folder for data2sd and rom2sd users
- Fixed the Apex and Nova Launchers getting messed up on install
- CLEANTweaks init.d re-balanced to be less aggressive - hopefully stops so many reboots
- Recompiled latest framework-res.apk with zombi-pop default_wallpaper.jpg
- Updated Google Chrome to version 40.0.2214.89
- Updated Google Maps to version 9.3.0
- Updated YouTube to version 10.02.3
- Updated Android Terminal Emulator to version 1.0.64
20150119 ZOMBi-POP Beta 4 changes
- Recompiled framework-res.apk with new default_wallpaper.jpg
- First public release
20150119 ZOMBi-POP Beta 3 changes
- New name - new logo! ZOMBi-POP
- Rethemed Aroma to new ZOMBi-POP theme
- Added 2 optional beta tweaks for testing (screen and kernel)
- Fixed _thatv11 kernel option
- Added Grimlock v5.0 (not tested)
20150118 Lollipop Beta 2 changes
- Updated to latest OMNI Lollipop source omni-5.0.2-20150117-zombi_tf700t-KANG maintained by lj50036
- Fixed issue with AOSP Browser getting installed when not selected
- Fixed issue with Live Wallpapers getting installed when not selected
- Fixed issue with Launcher3 getting installed when not selected
- Fixed issue with Terminal not getting installed when selected
- Fixed issue with DSPManager still getting installed when Viper4fx is installed
- Removed stock calendar as google app one is far superior
- Fixed init.d scripts not running due to wrong permissions and wrong ramdisk init.rc call
20150117 Lollipop Beta 1 changes
- Updated system and data apps to use new lollipop structures
- Updated all apps to latest versions
- Removed xposed as not compaitble with lollipop
- Tweaked the force gpu options
20150111 Lollipop Alpha 1 changes
- Updated to latest OMNI Lollipop source maintained by lj50036
- New PA GApps Lollipop version 2015
- Initial Beta test build to see what works and what doesn't
Click to expand...
Click to collapse
The Team
@sbdags - Creative Mastermind (From CROMi-X/CROMBi-kk/ZOMBi-X ROMS)
@lj50036 - Source Guy (From CROMBi-kk/ZOMBI-X ROMS)
@hardslog - The Canadian (From Grimlock ROMS)
@ikkeT - The Fin
Credits
Google
Omni Team - Thanks!
@_that For all the great advice, watching over us and fixing everything we break!!!!!
All the beta testers for your patience and feedback : fatboyinlycra, berndblb, drewski_1, duckredbeard, keshavmot2, corb06, jmaybush, JoJoDaClown, kansasboy001, TrofeoSC
To Do
Fix loads of stuff!
XDA:DevDB Information
ZOMBi-POP, ROM for the Asus Transformer TF700
Contributors
sbdags, lj50036, hardslog, _that, ikkeT
Source Code: https://github.com/zombi-x
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.1.x
ROM Firmware Required: JB 10.6.1.14.8 - 10.6.1.14.10 bootloader
Based On: OMNI AOSP
Version Information
Status: Stable
Current Stable Version: 20151210 5.1.1 RC2
Stable Release Date: 2015-12-10
Current Beta Version: 20150723 5.1.1 Beta
Beta Release Date: 2015-07-23
Created 2015-01-19
Last Updated 2016-03-21
DOWNLOADS
UPGRADE INSTRUCTIONS
Steps
1. If you haven’t yet, unlock your TF700 by following these instructions.
2. Install the latest version of Team Win Recovery Project (TWRP) 2.8+ or ClockWorkMod Recovery 6.0.5.0+ Note this ROM will NOT install with older versions of recovery!
TWRP XDA Thread
CWM XDA Thread
Download the recovery file from above, put it into the same folder where you have adb and fastboot files. Please rename it to twrp.blob or cwm.img and follow the instructions below:
Connect your transformer to your PC, reboot to the bootloader to enable fastboot by either holding down [power] and [volume down] or opening a command prompt in your adb.exe folder in windows:
Code:
adb reboot bootloader
To flash the recovery:
Code:
fastboot -i 0x0B05 flash recovery cwm.img
or
Code:
fastboot -i 0x0B05 flash recovery twrp.blob
A blue bar will go accross the screen on the tab and the command prompt will indicate it was successful in about 10 seconds
Then reboot the tablet either back to the bootloader or to android to complete
Code:
fastboot -i 0x0B05 reboot-bootloader
fastboot -i 0x0B05 reboot
You can now access the recovery by pushing [volume up] on the RCK icon in the bootloader screen
Click to expand...
Click to collapse
FLASHING THE ROM FROM RECOVERY
Steps
1. Download the ROM below and save to your internal or external SD Card. Do not unzip the file.
ZOMBi-POP ROM DOWNLOAD
Note: The first boot after install will take 20 mins whilst everything is built. Some people might think it is looping but it is not. The ROM also takes about 10 mins to stabilise after the first boot
ZOMBi-POP 5.1.1 RC2 20151210 Full Mirror 1
MD5 Sum: ee45e9bf273ed7fe59e7cd6b30087b7c
FILES ARE SIGNED. IF YOU ENABLE SIGNATURE VERIFICATION IN RECOVERY IT WILL VALIDATE THE FILE BEFORE FLASHING.
ROM2SD/DATA2SD USERS PLEASE READ!
ROM2SD only works if you have ZOMBI-POP, ZOMBi-X, CROMBi-kk, CROMi-X or miniC flashed on internal with a THATv10+ kernel. Just choose ROM2SD in the installer of ZOMBi-POP to flash it to ROM2SD and the installer will do the rest.
- Install ZOMBi-POP and choose ROM2SD or DATA2SD install
The ROM2SD1.zip below is only needed if you need to switch your recovery to between normal and rom2sd mode. For Example you want to backup or restore a rom2sd installation. Flash once to go rom2sd and flash again to go back to normal. A reboot always puts you back to normal. Thanks to _that!
ROM2SD1.zip Download Mirror 1
ROM2SD1.zip Download Mirror 2
MD5 Sum: 7b699136d59ea3d5538570ccaf422acf
The DATA2SD1.zip below is only needed if you need to switch your recovery to between normal and data2sd mode. For Example you want to backup or restore a data2sd installation. Flash once to go data2sd and flash again to go back to normal. A reboot always puts you back to normal.
DATA2SD1.zip Download Mirror 1
DATA2SD1.zip Download Mirror 2
MD5 Sum: 9d5e9e2fd32593f981624499b37924b2
2. Boot to recovery – Either choose Boot to Recovery from the Power Menu if available on your current ROM or from the tablet power off hold the [volume down] button and press the [power] button. Once your see the flashing RCK icon, press [volume up] to select. If another icon is flashing use [volume down] to move between icons.
3. Using your recovery make a Nandroid Backup of your current setup
4. Select install and navigate to where you saved your ROM zip file.
5. Choose the ZOMBi-POP zip file and follow the on screen prompts to customize your installation.
6. Reboot and enjoy.
Using GParted to setup a micro SD for ROM2SD or DATA2SD support
First and foremost - DO NOT USE MINI TOOL!
Formatting a micro sd card for ROM2SD
Note for DATA2SD just do one partition in stead of 2
We will be using a GParted Live boot USB and a FAST good quality micro sd like a Sandisk or Samsung Class 10 - SDHC/SDXC UHS-1 card with read speed of at least 20MB/S. If you have a cheap chinese eBay card don't bother - they are not good enough.
You will also need a USB Stick with at least 1GB size. Note this process formats the USB disk so don't keep any important files on it. It will also wipe your micro sd so make sure you are prepared.
1. Go to the link below and download the GParted Live CD/USB/HD/PXE Bootable Image and save it somewhere you remember
http://gparted.sourceforge.net/download.php
2. Download Linux Live USB Creator and install it
http://www.linuxliveusb.com/
3. Fire up LiLi USB Creator:
a. Choose your USB key - I,e, the drive letter for your USB (not sd card)
b. Choose your GParted iso image for the source
c. Choose the check box to Format Key in FAT32 and hide files
d. Click the lightning bolt to create
4. Now you have a bootable disk you need to boot from it. You may need to alter you BIOS Settings on your PC to boot from a USB Stick but mine did it without messing.
5. Insert your micro SD card into an SD Card adapter and insert into PC
6. Boot into GParted
7. Choose Gparted Live <Enter>
8. Don’t touch keymap <Enter>
9. Languge <Enter>
10. Start Gparted Automatically
11. Change device to your micro sd )it will default to you hard disk - hda– mine is /dev/sdc
12. Delete all existing partitions
For a 64GB card: (resize as needed but /system doesn't need to be bigger than 1GB)
13. Create new, always select primary: do this 3 times.
14. FAT 32 : Size 16GB – this will be /dev/sdc1 in gparted and will be your sdcard for storage in Android
15. EXT4 : Size 42GB – this will be /dev/sdc2 in gparted and will be your /data partition in Android
16. EXT4 : Size 1GB – this will be /dev/sdc3 in gparted and will be your /system partition in Android (not needed for data2sd)
Apply, wait until it finishes and then reboot. Remember to remove the usb stick
*Images stolen from elsewhere as I couldn’t get it to save mine
Now you are ready to install ROM2SD. Note if you want to use DATA2SD then only do 2 partitions 1x FAT32 and 1x larger EXT4
Then reinstall ZOMBi-POP but this time choose the ROM2SD / DATA2SD option
IRC FREENODE zombi-x
All,
The ROM is still in BETA and by flashing it you are helping the BETA Testing process
It may still have some bugs, spontaneously reboot, drain the battery faster or heat up a bit. The aim is to make it better and fix them.
If you find a bug and want to report it here please post a logcat (after it occurred) with a description of what you were doing at the time and the rough timing in the logcat to look at (these things get huge!).
You can also post a dmesg which is the kernel boot logs and can indicate issues with data corruption or hardware.
If you get a reboot then please post a last_kmsg from the /proc folder.
How to get a logcat
How to get useful logs
Thank you!!
Join us on IRC for a chat or if you have questions:
Freenode
zombi-x
There is no Q&A section for this rom as it is still in dev so you are ok to post your questions here!
Kernel Source as per GPL
[email protected]
FORKED FROM HERE
[email protected]
FOKED FROM HERE
[email protected]
FORKED FROM HERE
Liking it! Thanks @shonkin
Two Mirrors are up for uploads - enjoy!!
Off to bed
Thank you! Loving it
Sent from my One using XDA Free mobile app
sbdags said:
Two Mirrors are up for uploads - enjoy!!
Off to bed
Click to expand...
Click to collapse
Downloading now... getting ready for lift-off. By the way, I tweaked the zombi-pop dude's head I used to smooth its chin some -- I did a sloppy job in the one posted here above.
Blessings to you and the Zombi-Pop team for your hard work!
shonkin said:
Downloading now... getting ready for lift-off. By the way, I tweaked the zombi-pop dude's head I used to smooth its chin some -- I did a sloppy job in the one posted here above.
Blessings to you and the Zombi-Pop team for your hard work!
Click to expand...
Click to collapse
Check out the source link in the OP .....
Thx Josh
Thank you so much for releasing this! It's simply amazing!
Here's the result of my experience with this ROM so far:
- After formatting data, it installed ok, first boot was rather quick. While filling up my google account on the first boot, the tablet suddenly rebooted. Very weird, but after the reboot it worked just fine, just had to enter the initial wizard again. ('m using f2fs so hope everything is fine, it seems so as I didn't have to reinstall the rom).
- But then I noticed the camera didn't work. However, that got fixed after doing a reboot on my own.
- Overall, seems really fast and responsive, and I'm not even running on ROM2SD yet, just on internal and still feels quick.
- So, just missing the dock battery info on the dual battery widget :good:
Thank you so much guys! You're the best! Looking forward to further releases! :good:
PS: Altough the charging light comes up, it seems the dock is not charging the tabet for some reason.
EDIT: The dock is charging the tablet after all, just no information is available.
PS2: 1080p support on YouTube app! :good:
Firstly, I'd like to thank the developers for their outstanding work!
Now, I am curious if LP really runs better (in the TF700, specifically) or is it just our flash-aholic personalities? In this case I am a bit hesitant, due to the lack of XPosed. (In particular, I'd like to have XPrivacy... Greenify is also nice...)
So, is there a really noticeable difference from the previous Zombi? (I know it is, perhaps, subjective, but I'd like to hear opinions... I've heard not so great comments on the Galaxy S5 forums.)
Thanks,
Luis
The only thing I miss is portrait mode, anyone know a way to force it through?
Are there any ASUS Apps included or any of the Apps Packs by kansasboy001 compatible?
BULL3TPR00F said:
Are there any ASUS Apps included or any of the Apps Packs by kansasboy001 compatible?
Click to expand...
Click to collapse
I don't think there is a new ASUS app package yet, but remember we are the bleeding edge right now. Since this rom has opened the lollipop doorway, it's only a matter of time before someone follows @sbdags through.
yeah i figured it might be too early.
are there any asus devices out that have official lollipop rom? maybe we can port those apps over.
grayfoxmg1 said:
The only thing I miss is portrait mode, anyone know a way to force it through?
Click to expand...
Click to collapse
Indeed... Why is it missing?
anyone notice any other bugs yet? minor or major? so far ive noticed no portrait mode?
any functionality not working (ex. bluetooth, etc).
grayfoxmg1 said:
The only thing I miss is portrait mode, anyone know a way to force it through?
Click to expand...
Click to collapse
ntunix said:
Indeed... Why is it missing?
Click to expand...
Click to collapse
BULL3TPR00F said:
anyone notice any other bugs yet? minor or major? so far ive noticed no portrait mode?
any functionality not working (ex. bluetooth, etc).
Click to expand...
Click to collapse
It will be fixed in the next Beta ....
BT is working for me ... :good:
github commit
BULL3TPR00F said:
Are there any ASUS Apps included or any of the Apps Packs by kansasboy001 compatible?
Click to expand...
Click to collapse
Are you really posting this in my thread ?
Come on that has it own thread use it .....
Thx Josh
will manually editting the overlay/frameworks/base/core/res/res/values/config.xml file correct the issue?
remove the two lines and add the two new ones?
so far it looks like this rom is very stable with only a minor bug
BULL3TPR00F said:
will manually editting the overlay/frameworks/base/core/res/res/values/config.xml file correct the issue?
remove the two lines and add the two new ones?
so far it looks like this rom is very stable with only a minor bug
Click to expand...
Click to collapse
Do you not understand how github works and shows the commit changes ?
Maybe take some time to read up before posting ??
Thx Josh
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Samsung GT-S7562 CyanogenMod 11.0 Android 4.4.4
Unofficial Release
I proudly present my first Android related work.
The GT-S7560M has a similar hardware except the dual-SIM RIL, so the kylessopen firmware (thanks to jonypx09 and others) was a good initial source.
I reverse engineered the stock Java Radio Interface Layer, and based on that informations, I restructured the kylessopen’s sources.
Finally with my custom telephony-common, telephony-msim java layer, and with the stock rild, and libril*.so binaries, the GSM connection works.
Important: This is an unofficial release. If you find a bug, please send a feedback in this thread.
If you have a problem with the installation, write it down in the Q&A thread.
Compatibility:
S7562, S7562L supported.
S7562_C_, S7562_i_ are not supported. Don't flash on it, otherwise you will brick your phone.
Issues:
Video Encoding has bugs.
Camera is only 3Mpx.
FM radio not supported.
WiFi not works on L version, I need a tester.
Requirements:
TWRP Recovery latest (3.0.2) recommended
Installing TWRP method when no custom recovery is installed at all:
1. Download Odin flashable TWRP .tar to your PC
2. Reboot to download mode and flash TWRP with Odin
3. Reboot to TWRP recovery using VolUP+VolDN+Home+Power keycombo
4. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
5. proceed with cm Installation
Installing TWRP method when custom recovery cwm or twrp is already installed:
1. Download the latest Recovery flashable TWRP .zip package to your device
2. Reboot to custom recovery and flash TWRP .zip
3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important
4. proceed with cm Installation
CM11 Installation method:
1. Download the latest cm11 package to your device
2. Reboot to TWRP recovery.
3. TAKE FULL BACKUP of your system in order to be able to restore if something fails. This is important.
4. Make a factory-reset / Wipe your phone (everythig except SDCARD) important to prevent bootloops
5. Install Unofficial CM11 with TWRP (Uncheck zip file verification before install).
6. Reboot and configure your system
optional. If you are going to use gapps, reboot to TWRP recovery, flash gapps.
optional. If your mobile Connections are not working Flash the hungarian modem using TWRP recovery
Download links:
Hungarian Modem: Modem_S7562XXLJ3.zip Recovery flashable
Odin v3 for Windows: Odin3_GT-S7562.zip
Recovery - TWRP 3.0.2: recoveryTWRP302 Recovery flashable
Recovery - TWRP 3.0.2: recoveryTWRP302 Odin flashable
Latest version of gapps - opengapps.org. Select ARM as platform, select 4.4 as Android. As variant "pico" is recomended.
Stock Hun Firmware: S7562XXALJ4_S7562OXXALJ3_S7562XXLJ3_HOME.tar.7z
S7562 Cyanogenmod 4.4.4 RC3+
RC3 Maintenance updates + additional improvements built by klinkone and kengnatural
cm-11-20161028-UNOFFICIAL-kylessopen
The changelog of the latest build:
Latest security updates
Fixed OMX bug which did not allow the latest version of Viber app to work.
ART compile timeout increased to allow large program to be installed.
For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:
cm-11-20161029-UNOFFICIAL-kylessopen-physical-primary.zip
Previous build:
cm-11-20160305-UNOFFICIAL-kylessopen
default cpu governor set to ondemand and min. cpu freq. set to 245 MHz by default
default minfree settings changed to avoid hanging of the phone when zram is full;
ART fix for gcc-4.8 (thank to JustArchi)
BLN support without external app (button backlights are used as notification leds)
fixed front camera preview hanging after taking a picture
initial fix of facebook app video codec issue (still buggy)
For primary-physical configuration, where there is no emulated external memory, only physical sdcard is used as an external memory, please see below:
cm-11-20160305-UNOFFICIAL-kylessopen-physical-primary
This build is the same as cm-11-20160305-UNOFFICIAL-kylessopen ROM with the following differences:
physical-primary configuration
experimental high vm.dirty_ratio setting for improving i/o speed
Old changelogs
20160207 changelog:
-mounting the "hidden" partition disabled
-obsolete start() and startvm() returned back to support xposed again
-fixed soft reboot issue when bluetooth is switched off and user sends some file using it
20160205 changelog:
-bluetooth soft reboot fixed by kengnatural
-theme uninstall soft reboot fixed by kengnatural
-available ram is 645mb (~20mb more which is as stock)
20160105 changelog:
-zram and zcache updated + fixed
-zram reduced to 128mb
-added missing things for low ram config according to: https://source.android.com/devices/tech/config/low-ram.html
-user friendly f2fs support
-ramdisk ext4/f2fs double entries for /data and /cache
-initial BLN (capacitive keys act as notification LED)
-some cleanup in device tree
-removed cm-updater (obvious why)
20151230 changelog:
-applied "JustArchi's ArchiDroid Optimizations V3 for CyanogenMod (11)" optimization level -O3
-using google's GCC4.8 for rom and kernel
-bluez updated to V5.36 thanks @Codename13 for sending the pull request
20151207 changelog:
-changed kernel repo to my fork of majonez BA2X-2.0
-xposed patch
-fstab updated
-unused 50mb hidden partition is mounted to /hidden on boot do whatever you want with it
-dalvik-cache devided system apps go to /cache/dalvik-cache user apps go to /data/dalvik-cache (saves some space in /data)
-256mb zram enabled by default
20151127 changelog:
-initial basic rc3 configuration for updated RC3+ builds
-some repos changed to up to date ones (legacymod)
-latest cm-11.0 sources of 27.11.2015 including android security-patches of 01.11.2015
-wifi reconnect working
-no systemupdateservice wakelock aka google play services wakelock battery drain etc.
S7562 Cyanogenmod 4.4.4 RC3
Changelog:
1. Improved Bluetooth support
2. Most kernel debug flags disabled
3. Added some missing libraries
4. Merged all CyanogenMod source changes
5. Bugfixes
Comments:
I think it's a little faster than previous versions. - What do you think?
You can update system from RC2 without wipe your phone.
You can enable "Force high-end graphics". Mostly, animations are smooth.
I ask everyone, who have bluetooth accessories to test the bluetooth layer, and provide feedback what is working or not (just with log cats).
ROM: cm-11-20150323-UNOFFICIAL-kylessopen-RC3.zip
Old Releases
S7562 Cyanogenmod 4.4.4 RC2 - download count close to 1k
Changelog:
1. Backported Bluetooth driver and Management Interface from Linux Kernel v.3.13
2. Newest Bluez 5.28 Bluetooth stack
3. Few bugfixes to wireless driver
4. All RC1 updates included
You must wipe your phone before upgrade to RC2!
ROM: cm-11-20150309-UNOFFICIAL-kylessopen-RC2.zip
kernel_kylessopen_RC2_v2.zip This update solves bluetooth wakelock issue, so the phone can go to deep sleep.
bluetooth_startup_fix.zip This update solves the system crash at startup.
KlinkOnE's kernel based on RC2_v2 with F2FS support: ==>
S7562 Cyanogenmod 4.4.4 RC1 - downloaded more than 1k times
Changelog:
ROM: http://uploaded.net/file/pionx3a0 mirror: cm-11-20150205-UNOFFICIAL-kylessopen-RC1.zip
Updates for RC1 (flash with TWRP):
browser_fix.zip
signal_strength_fix.zip
torch_fix.zip
CameraFIX_v2.zip This will fix the front and back videocamera. Before install this, disable Viber's videoConverterService with DisableService app (Play Store).
If your battery quickly discharges on RC1, disable all bluetooth service (org.codeaurora.bluetooth, Bluetooth Share) with DisableService (Play Store).
Comments:
Working Radio Interface Layer for both SIM card
WiFi direct is not supported, so you can't enable. Use Bluetooth, Dropbox, email etc...
If you want to install Viber, before the first start, disable Viber's videoConverterService with DisableService app (Play Store).
The "OneL+ Lollipop" theme with "IdeaL Theme Dark"'s icons is beautiful.
To prevent sound disruption, enable the equalizer.
About Google Apps, and GService Bug
Fixed with all releases after rc3. For reference see below
Latest gapps (ver. 7.x) has issues, and eat our baterry, so I recommend to install the package that I linked, disable autoupdate in Gapps, and disable GPlay's CheckWifiAndAutoUpdate service with DisableService (from Play Store).
If your Gservices app updated to the version 7.x, you can easily downgrade to 6.x
(you can do this, if you installed my linked package or earlier):
Settings-->Security-->Device Administrators-->Uncheck "Android Device Manager"
Settings-->Apps-->Google Services-->Disable-->Yes, you want to remove updated version
Recommended gapps: pa_gapps-modular-pico-4.4.4-20150117-signed.zip
Future:
bugfixes
XDA:DevDB Information
[CM11][GT-S7562] Samsung Galaxy S Duos Kitkat 4.4.4, ROM for the Android General
Contributors
m4jonez, KlinkOnE, kengnatural
Source Code: https://github.com/majonez
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
Version Information
Status: Beta
Created 2015-03-27
Last Updated 2016-12-06
m4jonez said:
Samsung GT-S7562 CyanogenMod Kitkat Unoffical release
Click to expand...
Click to collapse
huntercity said:
doesn't works
Click to expand...
Click to collapse
What's wrong with links?
I can download files. It is a bit slow, but works for me.
m4jonez said:
What's wrong with links?
I can download files. It is a bit slow, but works for me.
Click to expand...
Click to collapse
both link response ... "ERR_CONNECTION_REFUSED"
the link about the sammobile firmware works
huntercity said:
both link response ... "ERR_CONNECTION_REFUSED"
the link about the sammobile firmware works
Click to expand...
Click to collapse
Maybe this site is blocked for you by your ISP or your DNS server is not serving this domain.
Try to set DNS servers for your computer to 8.8.8.8 and 8.8.4.4 (Google DNS).
Or use TOR browser.
m4jonez said:
Maybe this site is blocked for you by your ISP or your DNS server is not serving this domain.
Try to set DNS servers for your computer to 8.8.8.8 and 8.8.4.4 (Google DNS).
Click to expand...
Click to collapse
i tried different proxy and different connection but the results it's always the same
Link Please GAPPS for this rom
http://d-h.st/U30 tested by me works on stock hungary + cm11
deleted
I try the rom with EUR XXBML1 firmware and the ril doesn't work. If I have time i will try the rom again with the Hungary firmware. And something more, we will have update for those that don't work??
Your first job! The great one hats off brother gave another life to the device
Sent from my Micromax A106 using XDA Premium 4 mobile app
Hey
Hi, Thanks. just wanted to know if one sim card works or 2 are required??
You Nailed it bro! @m4jonez
YES! 100% Verified that we get network on both (you can insert single as well) .
However that the rom is a bit laggy (much better than one would expect from a first build).
Yes there are bugs ! but yeah! there is network too..
Where should we report the bugs bro @m4jones? I found some.
1 network on indian modem is super duper unstable.. so change op and recomended people to flash your modem file.
With your modem , i found the sim networks to be quite stable.
2 torch app is useless as neither app nor widget works. So fix it or remove it
( CAMERA WORKING FINE FOR ME)
COngrats and all the best ! continue your good work
The built-in browser fixed.
Where should we report the bugs bro @m4jones? I found some.
Click to expand...
Click to collapse
Post it here.
minor problem here:
Signal strength is reported wrong for both sims.
Always shows full strength.
Recognition seems to be working as values are changing but they are much too high. Around 2000dBm.
Phone calls in/out SMS and data rock stable on both sims for me.
Performance is good(better than expected).
Zram is not working init.rc entries(or script) are missing. Maybe a kernel problem too idk ATM.
Thanks @m4jonez you're great!!!!!
Gesendet von meinem GT-S7562
Perhaps it will help you to fix the flashlight in this time and the future.
http://forum.xda-developers.com/xposed/modules/xposed-flashlight-fixer-fix-devices-t2867267
KlinkOnE said:
minor problem here:
Signal strength is reported wrong for both sims.
Always shows full strength.
Recognition seems to be working as values are changing but they are much too high. Around 2000dBm.
Click to expand...
Click to collapse
fixed.
Vergilliy said:
Perhaps it will help you to fix the flashlight in this time and the future.
http://forum.xda-developers.com/xposed/modules/xposed-flashlight-fixer-fix-devices-t2867267
Click to expand...
Click to collapse
It was just a path issue with Torch. Fixed.
m4jonez said:
fixed.
Click to expand...
Click to collapse
working that was fast
Thanks
Gesendet von meinem GT-S7562
Step by Step Guide
Please provide step by step installation guide & few more after installation photos.
Review !!
Great Work !!:laugh::good: @m4jonez . Love to have a Cm Rom for our device
My thougts :
1) Battery drainage is an issue..
2) Interface Performance is good but can be better ( can't expect more from Rc1 )
3) Need a good overclocked Kernel !!
THANKS A TON
One Question ........Is lollipop next :fingers-crossed: ( kidding )
Can I flash Stock kernel in this??
xXx No Limits ☆ S5 ROM for G900F/W8
☆Fast☆Snappy☆Smooth☆Stable ☆
[FONT="][FONT="][FONT="]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/FONT]
[/FONT][/FONT]
About the ROM
GALAXY S5 Model ☆ SM-G900F/W8
Android 6.0.1 ☆ G900FXXS1CQAV
Changelist: 9493471
Security Updates: Januar 1, 2017
Rooted: SuperSU v2.77 Stable
Major flash options
SuperSU + suhide
Odexed
Deodexed
xXx Tweaks
Keyboards
Kernel selections
Xposed
Xposed Material Design Installer
Viper4Android|Beats|Atmos
Good Lock
Modded Camera
The base of this rom is very close to the original Samsung Touchwiz build and I’m flashing the original stock system image as I believe that this provides the most stable rom base for the S5. This method ensures totally correct permissions and symlinks which makes the rom most stable and compatible. You can choose if you want to install the rom either odexed or deodexed.
xXx System Tweaks
Based on that I added several useful CSC, build.prop and init.d tweaks for more and consistent system and network speed and improved Ram management. These tweaks also improve multitasking and keeps the system constantly fast.
A modified hosts file take care of the annoying ads and I added a fix which solves some issues which was introduced with the new security handling of Marshmallow.
Debloating
The rom is light debloated already and removes only apps which could be downloaded anytime later from Google Playstore
You could use my BareBone Cleaner to selectively remove much more apps and services which you don’t need to further improve available Ram and Speed and come down to a Barebone level and a very light Rom. The advantage to do this with the stock based TouchWiz rom is that the Camera, Bluetooth, NFC, Fingerprint etc. keep 100% working as expected.
SystemUI variations
Also I’m offering some extra flashable SystemUI options to add Good Lock or 3minit battery, the S7 white taskbar theme, and some more little tweaks.
Xposed
To round up everything you can install the Xposed framework which is totally ready to go. You just need to add the modules you want to use.
Sound enhancements
This is a combo of Viper4Android, Sony Beats, eXtremeBeats Aural Maximizer and Dolby ATMOS for a class’s better sound experience than you know it from the stock rom thanks to xda members guitardedhero, Ben Feutrill and worstenbrood.
[FONT="]Kernels[FONT="]
Currently you can choose between 3 different kernels. [/FONT] [FONT="]The default kernel is obviously the stock kernel for highest compatibility and stability. [/FONT] [FONT="]If you are interested in true SELinux permissive kernels with plenty of additional features you are able to choose between the [/FONT]Phoenix Kernel[FONT="], [/FONT]CrazySuperKernel and Boeffla-Kernel. Just visit their threads to see which kernel fits best your requirements.
[FONT="]Keyboards[/FONT][FONT="]
Currently you can choose between 3 different keyboards. [/FONT] [FONT="]The S5 stock keyboard, the S6 keyboard, the Sony Xperia Keyboard and the C5 Keyboard.[/FONT] [FONT="]The S6 keyboard unfortunately do not support key vibration while this and much more options are available with the Sony and very similar C5 Keyboard.[/FONT]
[/FONT]
Instructions
Flash Options
In the root of the rom installer package you find the file “xXx.options.prop”.
To change any installation options you will need to edit this file with Notepad++.
You may also copy this file onto your internal or external sdcard. In this case the installer will read the options from the sdcard instead of the file inside the installer.
xXx.options.prop editing
The easiest way is probably to download the xXx.options.prop using the download link in the op or second post to your PC and install Notepad++.
Never edit this file with any other editor on your PC. But you could also edit the prop file on with your phone. In this case you can use any given editor.
Then you change all desired values. You will always get explanation line and after that the option to be changed.
Then save your changes and place the modified xXx.options.prop to the root of your internal sdcard.
This way also future rom updates will use this settings instead the default settings in the rom zip.
xXx.options.prop options
root.supersu=
0 = no root
1 = enable root access (default)
2 = Experiental might bootloop - SuperSU + suhide 0.55 by @chainfire to get Safety Net & Pokemon Go working
deodexed.rom=
0 = odex (default)
1 = deodex
Difference between Odexed and De-Odexed Roms
kernel=
0 = Stock Kernel (default)
1 = Phoenix Kernel Reborn v1 powered by @tamirda
2 = CrazySuperKernel v4 powered by @CrazyGamerGR
3 = Boeffla-Kernel new Anykernel v2.4 Final powered by @Lord Boeffla
keyboard.mod=
0 = Stock S5 keyboard (default)
1 = S6 Keyboard (key vibration not working!)
2 = Stock S5 + Sony Xperia Keyboard
(Sony keyboard needs to be enabled in android settings)
3 = C5 Keyboard (like S6 Keyboard but newer and key vibration works!)
systemui.mod=
0 = pure stock SystemUI (default)
1 - White theme, 3minit battery, rounded notifications and recents, Sdcard notifications fix
2 = Good Lock v24.0.16
Here you find an introduction and demo as a Youtube video.
Good Lock is a SystemUI enhancement developed by Samsung which provides many new options for the notification area, recent apps screen and lock screen. I added that as a third “battery.mod” option in the xXx.options.prop. Default is 0 which will install the stock SystemUI. If you set it to 2. Just flash the separate SystemUI options to get Good Lock or one of the other SystemUI options. If you flashed Good Lock you will get a new app in the drawer which provides you with configurations and tons of options.
Please Note: Good Lock is replacing the complete SystemUI. This means when you want to have one of the other SystemUI options with the mods like 3minit or rounded notifications etc. it will totally replace Good Lock again.
3 - White theme, rounded notifications and recents, Sdcard notifications fix
Like option 1 but without 3minit battery
xXx.tweaks=
0 = no Tweaks
1 = Tweaks enabled (default)
A collection of system tweaks which optimizes overall speeds and RAM management
5-Way Reboot menu
Privat Mode fixed
Changed default Window Animation Scales to 0.5 for faster animations
Updated hosts file for Adblock
Screen Overlay Fix
SystemUpdateService Disabler
2 = xXx Tweaks + Qualcomm Adreno 330 Beta Drivers with Stability Fix by @DAS82 based the on @airidosas252 framework
Detailed information about this you will find here
Camera Mod=
0 = stock camera (default)
1 = camera mod thanks to @amk1
Detailed information about all mod features you will find here
Screen.overlay.fix=
0 = stock camera (default)
1 = camera mod thanks to @amk1
Detailed information about all mod features you will find here
xposed=
0 = no xposed
1 = Xposed + original Rovo Xposed Installer (default)
2 = Xposed + Material Design Xposed Installer thanks to @dvdandroid
sdcard.fix=
sdcard Fix Permissions script
fix ownership and permissions of files and directories on the sdcard to what they would be
if Android OS had put them there itself, since some apps can't access pushed files that have root.root as owner/group
Sometimes Apps FC when trying to access/write files on sdcard even with correct r/w permissions.
This might fix this issues.
Please Note: Depending on how much files you have stored on your sdcard it can take
up to several minutes to scan and fix it!!
Don't become nervous when Rom flashing process will stuck here for a while,
it will continue - Promised !!
Allowed values:
0 - disabled
1 - enabled (default)
sound.mod=
0 = Stock sound system
1 = OLD - V4A Combo - Viper4Android + Sony Beats + eXtremeBeats Aural Maximizer by @guitardedhero and Ben Feutrill
2 = OLD - Like Option 1 + Dolby ATMOS thanks to worstenbrood
3 = NEW - Viper4Arise/eXtremeBeats Combo by @A.R.I.S.E. Sound Systems and @Ben Feutrill (default)
security.files=
Take care of security-related system files if there are any like SuperSU PIN, Avast Anti-Thelf in root mode etc.
0 - skip backup
1= (default) - makes a backup and then restore at the end of installation
stock.recovery=
Flashing Marshmallow and installing SuperSU will trip Knox to 0x1 anyway. So just keep the default setting here to stay with your custom recovery.
0 – (Default) - check KNOX status and overwrite if 0x0
1= force overwrite current recovery with stock recovery
CSC=
This will provide you with two major options
KCSC – (default)
Keep current CSC, recommended in most cases.
This will save your current CSC before the system partition will be overwritten and after the new system is in place your current CSC will be restored.
Choose one of the following CSC’s and force this CSC to be installed during rom flash.
It should look like this sample CSC=BTU
Make sure everything is UPPERCASE
ALB, ALE, ARO, ATL, ATO, AUT, BGL, BMC, BTU, BVO, CHO, CMF, COO, CYO, DBT, DTM, EON, ETL, EUR, H3G, ILO, ITV, KSA, LUX, MEO, MET, MOB, MOT, MSR, MWD, NEE, NZC, OMD, OMN, ORX, PCI, PCW, PEO, PHE, PHN, PRO, ROM, SEB, SEE, SER, SIO, SWC, TDR, TEB, TEM, TEN, TMB, TMZ, TNZ, TOP, TPA, TPH, TSI, TSR, TTT, TUR, TWO, UPO, VD2, VDH, VDS, VIA, VIM, VNO, XEF, XEH, XEO, XME, XSG, XTC, ZTO
Click to expand...
Click to collapse
Space
CSC Options
This is a multi CSC rom which currently provides with the following sales codes
ALB, ALE, ARO, ATL, ATO, AUT, BGL, BMC, BTU, BVO, CHO, CMF, COO, CYO, DBT, DTM, EON, ETL, EUR, H3G, ILO, ITV, KSA, LUX, MEO, MET, MOB, MOT, MSR, MWD, NEE, NZC, OMD, OMN, ORX, PCI, PCW, PEO, PHE, PHN, PRO, ROM, SEB, SEE, SER, SIO, SWC, TDR, TEB, TEM, TEN, TMB, TMZ, TNZ, TOP, TPA, TPH, TSI, TSR, TTT, TUR, TWO, UPO, VD2, VDH, VDS, VIA, VIM, VNO, XEF, XEH, XEO, XME, XSG, XTC, ZTO
By default the “CSC” option in “xXx.options.prop” is set to CSC=KCSC.
This means "Keep current CSC". As long as you don’t wipe your system partition before you flash this rom this will keep the CSC of your current rom in place.
If you are typically using one of the above listed CSC’s just replace KCSC with the desired code of your mobile provider.
Click to expand...
Click to collapse
Space
Modem and Bootloader
It’s recommended to flash the corresponding Modem and Bootloader before you flash this rom.
As in most cases Modem and Bootloader will be flashed at the same time I combined them in one tar.md5 which have to be flashed with Odin. Just open the file AP…….tar.md5 in the “AP” section in Odin and flash it.
Bootloader & Modems for G900F
https://www.androidfilehost.com/?w=files&flid=39275
Click to expand...
Click to collapse
Space
Debloating
This rom is only very light debloated. If you want to debloat further you could use my BareBone Cleaner.
The BareBone Cleaner is an Aroma Installer based tool which will debloat your TouchWiz Lollipop rom up to a core minimum in order to increase available ram and get rid of performance wasting apps and services which are not mandatory.
You get rid of all the Samsung crap, bloatware, the annoying “check cover” warning or other apps which you could easily add again to your personal liking from the Google Playstore.
http://forum.xda-developers.com/galaxy-s5/development/mod-urwsoft-barebone-cleaner-t3043479
Click to expand...
Click to collapse
How to Flash everything
Create a Nandroid Backup in custom recovery of everything first
Shutdown the phone and pull the battery for about 10 sec.
Disconnect your phone from your PC
Then restart the phone straight to the download mode.
Now open Odin as Administrator on your PC and load the bootloader md5.
Now connect the phone to the PC and make sure Odin reports the phone connected.
Now hit ?Start? in Odin to flash it.
To be on the save side, shut down the phone and pull the battery again for about 10 sec.
Boot the phone into custom recovery (TWRP 3.0.0.0)
Hit ?Wipe? and then ?Advanced Wipe?
Go to Install Section, select Rom zip, flash the rom and reboot.
Wipe Dalvik / Art Cache, System, Data and Cache.
Optional you could now debloat your rom with the BareBone Cleaner. Could be done later as well.
Takes about 8-10 min until setup screen will show up.
Enjoy the rom.
Click to expand...
Click to collapse
xXx.options.prop editing
The easiest way is probably to download the xXx.options.prop using the download link in the op or second post to your PC and install Notepad++.
Never edit this file with any other editor on your PC. But you could also edit the prop file on with your phone. In this case you can use any given editor.
Then you change all desired values. You will always get explanation line and after that the option to be changed.
Then save your changes and place the modified xXx.options.prop to the root of your internal sdcard.
This way also future rom updates will use this settings instead the default settings in the rom zip.
Click to expand...
Click to collapse
Download folders
The following download links are fixed folder links which will provide you with a list of all available versions. Just choose your preferred version.
xXx No Limits Roms for G900F/W8
https://www.androidfilehost.com/?w=files&flid=48391
Bootloader & Modems for G900F/W8
https://www.androidfilehost.com/?w=files&flid=39274
Download "xXx.options.prop" only
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
URWsoft Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?w=files&flid=27003
Please Note: FlashFire 0.30+ users need to deselect the reboot option on the very last Cleaner Screen. Otherwise you would need to pull the battery.
Credits
:good::good::good:
@_alexndr - @airidosas252 - @amarullz - @amk19 - @arter97- @bejunk - @Ben Feutrill - @Chainfire - [FONT="]@[FONT="]CrazyGamerGR[/FONT] - [/FONT][FONT="]@DAS82 - [/FONT][FONT="]@dvdandroid - @edgarf28 - @gharrington - @guitardedhero - @klenamenis [/FONT]- [FONT="]@[FONT="]Lord Boeffla - [/FONT][/FONT][FONT="]@loserskater - @mcdachpappe [/FONT]- @mike1986. - [FONT="]@or1m - @osm0sis - [/FONT]@rufus.wilson - @tamirda - [FONT="]@topjohnwu - @wanam[/FONT]
XDA:DevDB Information
S5 Rom, ROM for the Samsung Galaxy S 5
Contributors
xXx
ROM OS Version: 6.0.x Marshmallow
Version Information
Status: Stable
Current Stable Version: 6.1
Stable Release Date: 2017-2-02
Created 2016-01-31
Last Updated 2017-2-02
Instructions and Features of the latest available Rom version
Version 6.1 based on CQAV is available for Download Many of you who are using TWRP 3.0.0-0 or PhilZ Recovery experienced issues after flashing v6.0 with write access of apps to the internal sdcard. This was caused by the sdcard fix script from osm0sis which obviously only works with TWRP 3.0.2 or higher.
Version 6.1 solves this issue and is compatible again with TWRP 3.0.0-0 or PhilZ Recovery.
If you are already successfully using v6.0 you can stay with it as this is the only difference between v6.0 and v6.1. If you need to flash the rom again to use other options etc. you should use v6.1.
Downloads
G900F specific downloadsxXx_NoLimits_6.1_ G900FXXS1 CQAV.zip
https://www.androidfilehost.com/?fid=745425885120704156
G900F - Lastest CQAV bootloader & CQAW modem combination
https://www.androidfilehost.com/?fid=529152257862691417
G900W8 specific downloadsxXx_NoLimits_6.1_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=529152257862700164
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=24591000424953408
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 6.0 based on CQAV is available for DownloadMany of you was looking for an update of the sound mods. Thanks to all beta testers I was able to implement a new combo of the latest ARISE + eXtremeBeats.
Big thanks again to all beta testers who helped me to keep the rom alive as I don’t have my S5 anymore.
What’s new in 6.0 vs. 5.9:
New G900F Rom base CQAV
Change list 9493471
New Android Security Patch Level – Jan. 1, 2017
New Bootloader & Modem Combi
CQAV Bootloader
CQAW Modem
Updated several build.prop settings to improve smoothness, multitasking and lag free operation thanks to @airidosas252
More details here
Sound mods
NEW Viper4Arise/eXtremeBeats xXx Combo thanks to @A.R.I.S.E. Sound Systems and @Ben Feutrill
Set sound.mod=3 in xXx.options.prop to get it. (new default)
To get my favorite headset sound profile for perfect bass and clarity open Viper4Arise app, go to the menu and “Load Effect Profile” called “Deep Bass+Clarity” thanks to @mantakos
After applying the profile, don’t forget to switch on the Master Power” switch in Viper4Arise
Please Note: This new sound mod combo is not compatible with the previous one. It will completely replace any old sound mod and I didn’t add Dolby ATMOS as an option for this as this new combo itself is more than awesome especially in combination with the Effect Profile from mantakos.
Known Issue: After each phone restart you will see the green apps updating screen for about 1 sec. Don’t worry, but we couldn’t get rid of this so far.
OLD V4A Combo is still available with the following settings:
Set sound.mod=1 in xXx.options.prop to get Viper4Android + eXtremeBeats
Set sound.mod=2 in xXx.options.prop to get Viper4Android + eXtremeBeats + Dolby ATMOS
SDcard Fix Permissions script thanks to @osm0sis
Added this script as a new option.
It’s NOT solving the known r/w access permission issues in Marshmallow but fix ownership and permissions of files and directories on the sdcard to what they would be if Android OS had put them there itself, since some apps can't access pushed files that have root.root as owner/group.
Sometimes Apps FC when trying to access/write files on sdcard even they seem to have correct r/w permissions. This might fix this issues.
Set sdcard.fix=1 in xXx.options.prop to get it. (new default)
Please Note: Depending on how much files you have stored on your sdcard it can take up to several minutes to scan and fix it!! Therefore don't become nervous when Rom flashing process will stuck here for a while. It will continue. Promised J
Also this sdcard.fix option is triggered whenever you choose the new sound mod to be installed.
Updated xXx.options.prop to v14
New defaults
sdcard.fix=1
xposed=2
sound.mod=3
SuperSU 2.7.7 Stable for best compatibility
Updated Boeffla Config App to 2.4.28
Requires a system restart after a clean install and the very first initial Boeffla Settings App execution
Special Notes:
Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
Please make sure to provide root permission to the SystemUpdateService Disabler when asked
sdcard.fix option is triggered no matter what if you choose the new sound.mod=3 to be installed
Known issue: There seem to be an issue that the stock music player fc after it was updated to the latest version via Play store. We will look into that and hopefully find a fix.
Suhide is still on v0.55 and most probably don’t work since Nov. security updates anymore.
root.supersu=2 in xXx.options.prop was not tested anymore and I suppose that it would not work anymore and end up in a bootloop.
So better use root.supersu=1 only.
Downloads
G900F specific downloadsxXx_NoLimits_6.0_ G900FXXS1 CQAV.zip
https://www.androidfilehost.com/?fid=745425885120704155
G900F - Lastest CQAV bootloader & CQAW modem combination
https://www.androidfilehost.com/?fid=817550096634741921
G900W8 specific downloadsxXx_NoLimits_6.0_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=457095661767133248
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=817550096634742364
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 5.9 based on CPLV is available for Download
Even I always said that I would like to stay on the G900FXXU1 type firmware I decided now to switch to G900FXXS1. The reason is that for 2 or 3 month now the monthly Android Security updates was always provided as “S1” about 2 weeks before “U1”. Also as @TheHiman reported earlier, it looks like the S1 type firmware supports VoLTE which the “U1” firmware don’t. http://forum.xda-developers.com/gala...7#post70012597
The main reason why I wanted to keep staying with the U1 type was that switching back and forth may not allow dirty flashes without experiencing errors from Google Partner Setup etc. I had some beta testers who tested several configurations and confirmed that even dirty flashing works fine. So shouldn’t be an issue.
There was several users complaining about slow boot up times and it was reported that SuperSU 2.7.7 stable didn’t have this issue. For beta testing I used latest v2.7.9 SR1 and this failed in combination with PhoeniX Reborn kernel. Therefore I decided to go for SuperSU 2.7.7 stable. If you still want to go for the latest SuperSU just flash it after the rom in sequence or any time later.
I saw several requests to update the sound mods like V4A and eXtremeBeats to the latest version. I didn’t find the time yet to do so.
Big thanks again to all beta testers who helped me to keep the rom alive as I don’t have my S5 anymore.
What’s new in 5.9 vs. 5.8:
New G900F Rom base CPLV
Change list 9493471
New Android Security Patch Level – Dec. 1, 2016
New Bootloader & Modem Combi
CPLV Bootloader
CPJ1 Modem
Updated SuperSU 2.7.7 Stable
Updated PhoeniX Kernel to new PhoeniX Reborn Kernel V1.0 MM
Set kernel=1 in xXx.options.prop to get it
Updated Good Lock to v24.0.16
Set battery.mod=2 in xXx.options.prop to get it
Please Note: Fingerprint don’t work with Good Lock. Workaround here
Changelog
Updated Boeffla Config App to v2.4.22
Requires a system restart after a clean install and the very first initial Boeffla Settings App execution
Special Notes:
Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
Please make sure to provide root permission to the SystemUpdateService Disabler when asked
Known issue: There seem to be an issue that the stock music player fc after it was updated to the latest version via Play store. We will look into that and hopefully find a fix soon.
Suhide is still on v0.55 and most probably don’t work with latest Nov. security updates anymore. root.supersu=2 in xXx.options.prop was not tested anymore and I suppose that it would not work anymore and end up in a bootloop. So better use root.supersu=1 only.
Downloads
G900F specific downloadsxXx_NoLimits_5.9_G900FXXS1CPLV.zip
https://www.androidfilehost.com/?fid=673368273298919727
G900F - Lastest CPLV bootloader & CPJ1 modem combination
https://www.androidfilehost.com/?fid=529152257862691417
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devd...3659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 5.8 based on CPK3 is available for Download
Yes, I said I will stop the development for the S5. That’s still true. What I did is just created a new 5.8 version based on CPK3 and updated several components like supersu, kernel, xposed etc. As long as this method is working without the need to update any of the mods it’s an faily easy task for me.
Nevertheless, an experienced user tested it for me and everything seems to work fine. Therefore, herewith I make the G900F version available to all of you.
What’s new in 5.8 vs. 5.7:
New G900F Rom base CPK3
Change list 9493471
New Android Security Patch Level – Nov. 1, 2016
New Bootloader & Modem Combi
CPK3 Bootloader
CPJ1 Modem
Updated SuperSU 2.7.8 SR5
Updated Xposed framework by wanam to v87.1
· Updated Material Design Xposed Installer to latest Nov. 2016 Version
Set xposed=2 in xXx.options.prop to get it
Set xposed=1 for original Rovo Xposed Installer v3.1 (default)
Updated Boeffla-Kernel and App to v2.4 Final
Set kernel=3 in xXx.options.prop to get it
Requires a system restart after the very first initial Boeffla Settings App execution
Special Notes:
· Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
· Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
· Version 5.8 can be dirty flashed over at least all 4.x versions. All earlier Versions especially Lollipop version like v1.6 or older should definitely be clean installed.
o Although it helps to make a clean install from time to time to get rid of some weird issues. Read user experience here
· Please make sure to provide root permission to the SystemUpdateService Disabler when asked
· Suhide is still on v0.55 and most probably don’t work with latest Nov. security updates anymore. root.supersu=2 in xXx.options.prop was not tested anymore and I suppose that it would not work anymore and end up in a bootloop. So better use root.supersu=1 only.
Downloads
G900F specific downloadsxXx_NoLimits_5.8a_G900FXXU1CPK3.zip
https://www.androidfilehost.com/?fid=385035244224402767
G900F - Lastest CPK3 bootloader & CPJ1 modem combination
https://www.androidfilehost.com/?fid=385035244224402568
G900W8 specific downloadsxXx_NoLimits_5.7_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=457095661767103996
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=24591000424953408
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
New Version 5.7 based on CPJ6 is available for Download
What’s new in 5.7 vs. 5.6:
New G900F Rom base CPJ6
Change list 9493471
New Android Security Patch Level – October 1, 2016
New Bootloader & Modem Combi
CPJ6 Bootloader
CPJ1 Modem
Hopefully finally fixed DCMprovider error message
G900W8 stock firmware was not updated yet but got the xXx 5.7 rom update which this time is the DCMprovider error message fix only. If you don’t experience that, no need to update.
Special Notes:
· Rooting option is enabled by default but flashing this Rom with root enabled will trip Knox so you will end up with in Knox 0x1.
· Some Tweaks are requiring the rom to be deodexed. Therefore installing xXx Tweaks will also trigger rom deodexing no matter what.
· Version 5.7 can be dirty flashed over at least all 4.x versions. All earlier Versions especially Lollipop version like v1.6 or older should definitely be clean installed.
o Although it helps to make a clean install from time to time to get rid of some weird issues. Read user experience here
o Important Note for G900W8 users: v5.7 is based on latest G900W8VLS1DPF3. If you are coming from v5.0 (or lower) G900W8VLU1DPD3 you most probably will experience errors from Google Partner Setup etc. You could try to wipe data of the respective app to fix this but best you can do is a clean install.
· Please make sure to provide root permission to the SystemUpdateService Disabler when asked
· Suhide is still on v0.55. Chainfire recently posted that he will update it but it might take some more time as he is planning to release a new SuperSU version first.
· If anybody is missing his desired CSC please provide me with information which specific stock rom includes that.
Downloads
G900F specific downloadsxXx_NoLimits_5.7_G900FXXU1CPJ6.zip
https://www.androidfilehost.com/?fid=457095661767103997
G900F - Lastest CPJ6 bootloader & CPJ1 modem combination
https://www.androidfilehost.com/?fid=457095661767103992
G900W8 specific downloadsxXx_NoLimits_5.7_G900W8VLS1DPF3.zip
https://www.androidfilehost.com/?fid=457095661767103996
G900W8 - Lastest DPF3 bootloader & DPF3 modem combination
https://www.androidfilehost.com/?fid=24591000424953408
All devices downloads
xXx.options.prop
http://forum.xda-developers.com/devdb/project/?id=13659#downloads
Aroma based Barebone Cleaner
(Latest TWRP versions have issues. TWRP 3.0.0.0 or FlashFire works for sure)
https://www.androidfilehost.com/?fid=24591000424945878
reserved for further resources
Downloading,thanx.
My baseband now is BOJ3,must i change in BOL3 or just flash your rom.Iam on 5.1.1 lolipop
Isn't their an option for tweaks and odex? Are there any tweaks like build prop added for odex? Cheers
Congratulations @xXx ! This is an amazing ROM! It is super fast and smooth and yet friendly on the battery under normal usage/sleep. Everything I tried works without a hitch so far. Thank you very much for sharing!
Two questions bro, it works on 900M? And your rom has system control? Like hct or phoenix?
Again i say that your work is very good and i rated it 5 stars ...i flashed the rom deodexed + tweaks, smooth as butter here. Because i posted in your cleaner thread i also repeat this:
!WARNING!: Deleting 3minit app from system makes the system ui crashing;
FIX: Dirty re-flash the rom and all goes well. For who wants the stock battery, simple open 3minit and navigate to "user", then choose the 15th one (even if it's not the 15th you should see the stock icon in users section) for having the stock battery icon back
Probably a stupid question, but do you think this will work on a G900i variant? This rom sounds really good and there are not many options for rom based on G900i.
I just get 50k on antutu
Thanks for this rom , i will test today and i will report !
mladenovic73 said:
Downloading,thanx.
My baseband now is BOJ3,must i change in BOL3 or just flash your rom.Iam on 5.1.1 lolipop
Click to expand...
Click to collapse
this depends on the rom you are using right now. If this is very close to stock without any tweaks and mods you should be fine if you just flash over. Otherwise I would recommend to wipe system first to make a clean install.
Thanx man.
What about xposed?
Sent from my SM-G928F using Tapatalk
luigy-cer7 said:
Two questions bro, it works on 900M? And your rom has system control? Like hct or phoenix?
Click to expand...
Click to collapse
john-au said:
Probably a stupid question, but do you think this will work on a G900i variant? This rom sounds really good and there are not many options for rom based on G900i.
Click to expand...
Click to collapse
this rom is basically for G900F and includes the respective stock kernel. You might be lucky to get it working if your G900 variant is snapdragon based and if you flash a custom kernel right after you flashed the rom. Rom content for G900M, G900T or G900W8 is similar to G900F. So should work fine with custom kernel while G900i, G900L are a bit different and might show some NFC, Wifi issues etc. Exynos based models like G900H are not working at all with this rom.
tobs3596 said:
I just get 50k on antutu
Click to expand...
Click to collapse
Debloated? Are you using stock kernel?
lovewisher said:
What about xposed?
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
works fine. Use arter97 http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463. Latest stable release only works on deodexed roms. Latest beta also work on odexed.
xXx said:
works fine. Use arter97 http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463. Latest stable release only works on deodexed roms. Latest beta also work on odexed.
Click to expand...
Click to collapse
thnx for reply dear can u tell me name which file should i download lots of file showing i have no idea
marko11071989 said:
Debloated? Are you using stock kernel?
Click to expand...
Click to collapse
which kernel is recommended?
lovewisher said:
What about xposed?
Click to expand...
Click to collapse
xXx said:
works fine. Use arter97 http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463. Latest stable release only works on deodexed roms. Latest beta also work on odexed.
Click to expand...
Click to collapse
lovewisher said:
thnx for reply dear can u tell me name which file should i download lots of file showing i have no idea
Click to expand...
Click to collapse
This Xposed Framework installation description is for deodexed rom only!
Create a backup first
Install XposedInstaller app from from rovo89 XposedInstaller_3.0_alpha4.apk
Important! Install the apk first before you flash the following xposed framework zip, otherwise you will end up in a bootloop.
Download the xposed framework zip xposed-v75-sdk21-arm-arter97-snapdragon.zip and place it on your internal/external SDcard
Flash the xposed framework zip
Reboot your system and you are ready to add your desired xposed modules
nAOSProm-6.0 for Google Nexus 7 2012
The purpose of this rom is to provide a rom not so far of the AOSP with some cool features (nAOSP means "near AOSP").
It is fork of nAOSProm for Xperia S.
nAOSProm is stable, works very smoothly, works well with layers, xposed...
It has integrated Superuser app so superSU is not necessary, but it works well also if you flash it.
There are no FCs with Setup Wizard and Google Play services, when clean flashed together with gapps.
Change log
nAOSProm-6.0 b11
AOSP android-6.0.1_r79 - February security patch
Previous releases
nAOSProm-6.0 b10
AOSP android-6.0.1_r74 - November security patch
f2fs: added f2fs check to fstab
nAOSProm-6.0 b09
AOSP android-6.0.1_r70 - October security patch
Fixed sound on system start
nAOSProm-6.0 b08
AOSP android-6.0.1_r66 - September security patch
nAOSProm-6.0 b07
AOSP android-6.0.1_r61 - August security patch
Superuser replaced with new Superuser with AppOps
su: Support for multiuser and the new Superuser
Ui: Battery styles (see Settings/nAOSProm/More)
Ui: Optimizing application displays the application name
Ui: Correct handling of NavBar menu button in old apps
Settings: Display safe entries into nAOSP section (depends on current user, root access ...)
Boot: check f2fs not run anymore - faster boot in the case of f2fs data and cache
Geolocation: fixed location provider
PerformanceControl: changed to drawer view ui
nAOSProm-6.0 b06
AOSP android-6.0.1_r52 - July security patch
Themes: Full support of Layers 4.0
SystemUI: Added battery percentage text to status bar
You can configure it from Settings/nAOSProm/More.../Battery Percentage
nAOSProm-6.0 b05
AOSP android-6.0.1_r46 - June security patch
Added Immersive Mode Quick Settings tile (hide NavBar and/or Status bar)
You can add/remove tile from Settings/System UI Tuner/Quick Settings
nAOSProm-6.0 b04
AOSP android-6.0.1_r43 - May security patches
Added nAOSP "More" settings:
Memory settings
Signature spoofing
Others: Quick Settings Expand and Status Bar DT2S switches
Animations speed up
nAOSProm-6.0 b03
AOSP android-6.0.1_r24
Switched to daniel_hk kernel
Performance improvements
Added PerformanceControl app
Added Caffeine Quick Settings tile
nAOSProm-6.0 b02
AOSP android-6.0.1_r22
Added ViPER4Android
Added adb over wifi quick tile
nAOSProm-6.0 b01
AOSP android-6.0.1_r16
OTA: support with ROM Updater (see Settings/About phone/Updates)
OTA: Layers: OTA will preserve theme files when flashing a new ROM version (updating)
F2FS support
Superuser integration
Browser, Music and Gallery2: AOSP version replaced by CyanogenMod version
Power Key: Include Reboot menu (Normal, Soft, Recovery and Bootloader)
Quick Setting: Can be pull down directly with one finger on the 1/3 right of the Status bar
Recent Applications : Close all applications button on the right bottom
Double Tap to Sleep on the status bar
Settings: nAOSProm section that permit you to configure the ROM, to start Layers Manager, Superuser and SuperSU if available.
No FCs for Setup Wizard and Google Play Services on initial boot
Requirements
Rooted Nexus 7, TWRP 2.8.7.0 - 3.0+
Flashing
nAOSProm can be dirty flashed over other AOSP-6.0 based roms (not from CM based). I recommend clean flash if you come from other roms.
Flashing Procedure
Clean flash
Backup everything
Reboot into recovery
Convert data / cache to F2FS
Backup /sdcard - adb pull /sdcard/ sdcard/
Change data to F2FS - in twrp go to Wipe, advanced wipe, select Data,
Repair or Change File System, Change File System, F2FS
Change cache to F2FS - same as for data
restore sdcard data - adb push sdcard /sdcard/
Wipe everything except sdcard
Unmount /system
Flash nAOSProm
Flash gapps - I recommend open gapps
Reboot
Dirty flash
Reboot into recovery
Flash nAOSProm
Flash gapps - I recommend open gapps - nano
Wipe cash & dalvik
Reboot
Upgrading from previous nAOSP versions
This ROM has OTA update feature - it periodically (once a week by default) checks for new versions and offers to download and install them. You can check for new version manually in Settings/About phone/Updates.
Before doing update you should set post update settings - other zip files (gapps, xposed) that should be flashed after rom update. Once you set post update you can use it for future updates, or you can set updated zips before every update. You can also add custom open recovery script commands. If you want to automatically reboot after upgrade you can enter reboot command into Post Update / Aditional script.
When flashing nAOSProm layers are preserved, so you don't need to worry about that upgrading.
You can also manually upgrade nAOSProm in twrp by dirty flashing.
Download
b11 - 2017/03/12
Nexus 7 (2012) WIFI: nAOSProm-6.0-grouper-b11.zip
md5: d4eacd73204b8349edf1a4f546056679
Nexus 7 (2012) WIFI+3G: nAOSProm-6.0-tilapia-b11.zip
md5: f435fe788c51a0c2e1126ba63ec6bffa
Previous releases
b10 - 2016/11/14
Nexus 7 (2012) WIFI: nAOSProm-6.0-grouper-b10.zip
md5: 36603efdc8c975dc11d904b86420ad1d
Nexus 7 (2012) WIFI+3G: nAOSProm-6.0-tilapia-b10.zip
md5: 82f9cfcc9fc7a52fc60ebbaacabff71d
b09 - 2016/10/06
Nexus 7 (2012) WIFI: nAOSProm-6.0-grouper-b09.zip
md5: d51e2acfea135e1570d71bb993809e8f
Nexus 7 (2012) WIFI+3G: nAOSProm-6.0-tilapia-b09.zip
md5: 0233af777850b6f22dcf34b07d088404
b08 - 2016/09/08
Nexus 7 (2012) WIFI: nAOSProm-6.0-grouper-b08.zip
md5: abd3e21b2bfaf9a841707c41578d7c73
sha1: a7d2d4dfb0fcc64ff11f3067ae981694203495e8
Nexus 7 (2012) WIFI+3G: nAOSProm-6.0-tilapia-b08.zip
md5: 632811a641a3aafb610a9cc3219bd468
sha1: 827608fc8f2ad3331653cabcb0e235772c2a4f19
Thanks
@mickybart - for creating original nAOSP rom
@dmitrygr - for porting android 6 to Nexus 7 2012
@daniel_hk - for stable kernel with f2fs support and Performance Control app
AOSP/Google
Cyanogenmod Team
ViPER4Android Team
Android Community
Source
https://github.com/millosr/naosp_manifest/tree/nAOSP-6.0-grouper
First! This ROM is stable or in beta?
It is unofficial?
pickmod said:
First! This ROM is stable or in beta?
It is unofficial?
Click to expand...
Click to collapse
Rom is pretty stable. There are occasional cpu hogs in chrome, but that is happening also in other aosp 6 based roms on nexus 7 and even in stock lolipop.
I didn't experience any random reboot, there are no Google Play Services and Setup Wizard FCs.
Xposed is working fine on it. Layers are working.
This is first release for Nexus 7.
It's unofficial.
nAOSProm b02 released
I have released nAOSProm b02.
This is list of changes:
AOSP android-6.0.1_r22
Added ViPER4Android
Added adb over wifi quick tile
Download
Nexus 7 (2012) WIFI: nAOSProm-6.0-grouper-b02.zip
Nexus 7 (2012) WIFI+3G: nAOSProm-6.0-tilapia-b02.zip
Important
If you are upgrading from Settings/About/Updates, please make sure ROMUpdater application has Storage permissions. You can set storage permissions by:
Go to Settings/Apps
Press menu button [three dots] and Show System
Open ROMUpdater app settings
Enable Storage permissions
Press FORCE STOP button
Go to Settings/About/Update and update the rom
Hi,
on my device encrypting the tablet doesn't work. The dialog opens and after confirming the tablet reboots but doesn't start to encrpyt.
I tried with F2FS and also EXT4 as file system.
rainh said:
Hi,
on my device encrypting the tablet doesn't work. The dialog opens and after confirming the tablet reboots but doesn't start to encrpyt.
I tried with F2FS and also EXT4 as file system.
Click to expand...
Click to collapse
Can you give me adb logs?
I didn't test encryption, since this is an old tablet and not very fast, so I believe that encryption will add additional overhead.
EDIT: Misread the above 2 posts, my reply was not relevant to that issue.
@millosr Thanks for the new b03 release, has some cool added features.
Mike T
nAOSProm b03 released
Changes:
AOSP android-6.0.1_r24
Switched to daniel_hk kernel
Performance improvements
Added PerformanceControl app
Added Caffeine Quick Settings tile
New kernel with PerformanceControl has overclocking support and Double Tap To Wake feature (which can consume battery).
Performance improvements are done by tuning memory parameters in device/asus/grouper.
Additional tuning can be done through PerformanceControl.
Download:
Nexus 7 (2012) WIFI: nAOSProm-6.0-grouper-b03.zip
Nexus 7 (2012) WIFI+3G: nAOSProm-6.0-tilapia-b03.zip
Very Stable ROM!
I use the nAOSProm-6.0-tilapia-b03 and my single problem is that mobile internet doesn't work when it's in standby mode for a longer time. i can see the triangle on the top but it's empty so there is no internet. After restarting the Nexus 7 mobile internet works fine again. Is it possible to solve this bug?
EDIT: I forgot to say that when it's in standby mode for a longer time i always active flight mode before to save battery. after wake up the nexus 7 and deactivate flight mode there's the internet problem described above.
How to disable Double Tap to Sleep on the status bar?
nilsxvx said:
Very Stable ROM!
I use the nAOSProm-6.0-tilapia-b03 and my single problem is that mobile internet doesn't work when it's in standby mode for a longer time. i can see the triangle on the top but it's empty so there is no internet. After restarting the Nexus 7 mobile internet works fine again. Is it possible to solve this bug?
How to disable Double Tap to Sleep on the status bar?
Click to expand...
Click to collapse
I will check mobile internet problem.
There is no option to disable Double Tap to Sleep for now. I will maybe add it in the next build.
where can i get open gapps, please?
tilapia
I become everytime "Insufficient storage space available in System partition." when trying to install open gapps with TWRP
So, i found that i forgot to mount "system", thats why i got "insufficient space" message
I downloaded OpenGapps arm 6.0 mini, but now i get something like "this gapps version is incompatible with your Android Rom"
RL_ka said:
So, i found that i forgot to mount "system", thats why i got "insufficient space" message
I downloaded OpenGapps arm 6.0 mini, but now i get something like "this gapps version is incompatible with your Android Rom"
Click to expand...
Click to collapse
I'm using OpenGapps micro 6.0 arm, never had problems with it. Mini is too big for N7, since it has small system partition.
System doesn't need to be mounted, open gapps installation does the mounting.
nilsxvx said:
Very Stable ROM!
I use the nAOSProm-6.0-tilapia-b03 and my single problem is that mobile internet doesn't work when it's in standby mode for a longer time. i can see the triangle on the top but it's empty so there is no internet. After restarting the Nexus 7 mobile internet works fine again. Is it possible to solve this bug?
EDIT: I forgot to say that when it's in standby mode for a longer time i always active flight mode before to save battery. after wake up the nexus 7 and deactivate flight mode there's the internet problem described above.
Click to expand...
Click to collapse
I have tried this, and I'm getting gsm connection after turning off airplane mode. It just needs 30 seconds to reconnect.
Try to turn off mobile data, instead of going to airplane mode.
millosr said:
I'm using OpenGapps micro 6.0 arm, never had problems with it. Mini is too big for N7, since it has small system partition.
System doesn't need to be mounted, open gapps installation does the mounting.
Click to expand...
Click to collapse
It doesnt work "Insufficient storage space"
RL_ka said:
It doesnt work "Insufficient storage space"
Click to expand...
Click to collapse
Are you doing clean flash, with micro open gapps?
Are you flashing anything else except rom and gapps?
Are you using TWRP 3.0.2 ?
You can also try nano or pico open gapps.
Nexus 7 system partition has only 640 MB. After flashing rom and gapps (micro) I have only 22 MB free. So supersu, exposed and layers can use additional space so that you cant install micro open gapps.
millosr said:
Are you doing clean flash, with micro open gapps?
Are you flashing anything else except rom and gapps?
Are you using TWRP 3.0.2 ?
You can also try nano or pico open gapps.
Nexus 7 system partition has only 640 MB. After flashing rom and gapps (micro) I have only 22 MB free. So supersu, exposed and layers can use additional space so that you cant install micro open gapps.
Click to expand...
Click to collapse
I wiped everything, formatted cache and data to f2fs, system still ext4. Flashed rom and directly after that trying to flash gapps.
Already tried to flash rom and boot it, before flashing gapps. No Luck
Yes, twrp 3.0.2
RL_ka said:
I wiped everything, formatted cache and data to f2fs, system still ext4. Flashed rom and directly after that trying to flash gapps.
Already tried to flash rom and boot it, before flashing gapps. No Luck
Yes, twrp 3.0.2
Click to expand...
Click to collapse
Have you tried nano or pico open gapps?
Can you send me twrp log - advanced, copy log, then transfer it to pc and send?
Can you also check partitions with "df" from adb shell, or from twrp terminal, but you need to mount system first?
I just installed this on my forgotten tilapia, so thanks!
Quick question: I see that on the Cyanogen's discussion they propose some performance tricks (journaling off, auto trim everyday and something called ParrotMod): should we take those suggestion or ignore them?
Thanks, will report back in a few days!
dvdbos said:
I just installed this on my forgotten tilapia, so thanks!
Quick question: I see that on the Cyanogen's discussion they propose some performance tricks (journaling off, auto trim everyday and something called ParrotMod): should we take those suggestion or ignore them?
Thanks, will report back in a few days!
Click to expand...
Click to collapse
I'm not sure those things work with F2FS. You can try them if you want.
Can you paste links with the discussion?