Related
XFAB Phablet(DAPENG A9230+,PICOPAD 5 GEA) - 5" Android Mobile - Root, CWM and ROMS
Dear Friends,
Good day.
I have own this device, which is from NXG electronics Ltd, India. It is good and I enjoy it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Device XFAB PHABLET (MODEL NO - E1808_V75_HJY1A6X_5647)
[*]Brand NXG Electronics Ltd, India
[*]CPU 1GHz Cortex A9 (ARM v7 processor rev 10)
[*]Hardware MT6575
[*]OS Android 4.0 Ice Cream Sandwich
[*]RAM : 512MB
[*]Internal Memory 4GB
[*]Expandable Memory MAX support upto 64GB Class 12 Micro SD Memory Card (TF-Card)
[*]Screen 5.2-inch Capacitive multi-touch screen (5 points), WVGA: 480 x 800, 16 Million Colors
[*]Network Dual SIM Dual Standby, supports WCDMA+EDGE or EDGE+EDGE
[*]2G： Yes (GSM:850/900/1800/1900 MHz)
[*]3G： Yes (2100 MHz)
[*]Built in Sim card Slot (Dual SIM)
[*] Supports GSM/GPRS/EDGE/WCDMA HSPA
[*]GPS Built In A-GPS, supports voice navigation
[*]Connection Bluetooth with EDR & A2DP
[*]Wi-Fi : IEEE 802.11 b/g/n, WiFi Hotspot functionality, Tethering & portable hotspot
[*][ Micro USB 2.0
[*]Camera Dual Camera
[*] Back 8MP with Auto focus and Flash LED
[*] Front 0.3 Mega pixel
[*]Sensor Gravity Sensor, Proximity Sensor, Light Sensor]
[*]Color Black
[*]Video Playback Video playback and recording, supported formats: 3GPP, MP4, 720P(1280 x 720)
[*]Video Formats AVI , MP4 , FLV , 3GP , MOV , ASF , MPEG , RMVB , etc.
[*]Audio MP3 , AAC , WAV , etc. / 3.5 mm Audio jack
[*]Size 147 × 86 × 9.7 mm
[*]Weight 165 g
Accessories
Battery : 2800mAh and 180 hours of standby time
(2*2800mAh) 1 Battery Free
Earphone / 3.5 mm Audio Jack
USB Cable
Charger
The following is the Company Website
http://www.nxgelectronics.in/xfab.html
I have attached the screenshots, which were taken from my Xfab.
Device is Very good.
I have used Some Roms from Russian Forum (forum.china-iphone.ru) and posted here.
Developers, Please help here for Custom ROMs
NXG ORIGINAL STOCK ROM here
http://www.nxglabs.in/nxgblog/?p=324
THE FOLLOWING, DO AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY FAILURE DUE TO MISTAKE. BUT WHILE DOING SAFELY, THERE WILL BE NO DEIVCE BRICK
ROOTING:
I rooted through Tpsparky Root. Thanks to Mr.SparkyM3 . I have attached the file for rooting to all friends.
First install the MTK 6575 driver in the system (PC).
Enable 'USB debugging' mode in mobile (settings - developer options)
connect mobile through USB cable to the PC
turn on file copy mode in mobile
Then simply click the bat file and proceed with instructions.
CLOCKWORK MOD RECOVERY
THANKS TO RUSSIAN developer - Mr.Arsenev.
I have attached the link to clockworkmod recovery. But, the file is complete Rom. So, you have to download complete Rom files.
Flash through Smartphone flash tool and Good guide is here - http://bm-smartphone-reviews.blogspot.in/2012/05/mt6575-flashing-tutorial.html
Remove the recovery file from the downloaded Rom files and replace the attached recovery file. I dont know to separetly to flash the recovery. If anybody know, Please help. So, while flashing only select 'Recovery' and follow the 'bm-smartphone' guide. Your downloaded Rom is not waste, because that is 23.07.2012 build. so you can use also that Rom. But anyway stock rom is best.
Link for 23.07.12 build - http://narod.ru/disk/60288821001.67...723_e1808_v75_hjy1a6x__Flashtool_4.0.zip.html
Lewa TWRP recovery - given by Mr.black_cappucino - http://forum.xda-developers.com/showpost.php?p=36880132&postcount=17
you can install as the same method as above (clockworkmod recovery).
or - through Mobileuncle tools.. but I didnt test through Mobileuncle tools. I have attached the mobile uncle tools apk
AXIOO TOUCH RECOVERY - V.2.3.2.3
Works well in Our mobile. It is designed for AXIOO Picopad 5 GEA (Same Our Mobile - Indonesian Brand name is that) by Mr. insane ranting
Thanks to the Expert. Tested by me. 100% working.
Link here - http://www.jfdesignnet.com/?p=2804
Flash through the flash tool, as same as previous methods.
CUSTOM ROM
CUSTOM ICS:
1. Ok.. ICS 4.0.6 (modified as 4.0.6) ,custom ROMs are here
http://forum.china-iphone.ru/viewtopic.php?p=659135#p659135
Use google translate in browser. Because page is in Russian.
It is made by Mr.Alexey arsenev, russian developer for Star N8000. He told that it will match exactly to Dapeng A9230+. So I tried, and it exactly matched.. All tweaks are good. Rom is Very fast. "Awesome Beats" in this Rom is Excellent.. No need to buy Beats headphones.. Medium quality earphones are enough.. So, if you want , try.
2. Mr. black_cappucino' s CUSTOM ICS ROM - http://forum.xda-developers.com/showpost.php?p=36899596&postcount=18
3. GIONEE GN868 ROM (Micromax A90) - Stock ROM works well. has little problems. but we can solve that.
Little problems - we can solve that.
a. no signal - copy 'modem.img' from your stock rom (\system\etc\firmware) into GN868's Rom - same folder and change permissions (rw-r--r--)
b. bluetooth, wifi crashing - copy 'mtk_stp_wmt.ko' from your stock rom (\system\lib\modules) into GN868's Rom - same folder and change permissions (rw-r--r--)
Use your's stock ICS boot.img in the downloaded ROM .
Flash through Recovery.
Done .. Rom will be perfect.
Specialities in this ROM - 1. ICS Onscreen keys. 2. stock launcher with themes..
Link - http://www.romzj.com/index.php?option=com_mobile&task=download&id=4144&from=rom
4. SAMSUNG STYLE ROM - LENOVO A750 - works good in our mobile.
Specialities - Samsung Style ROM, Sony Bravia Engine, Dual Sim dialer.. etc..
works well. wifi problem one thing. for this you copy 'mtk_stp_wmt.ko' from your stock rom (\system\lib\modules) into This Rom - same folder and change permissions (rw-r--r--)
link - http://dl.vmall.com/c0pyvnub9y
Use your stock ics 'boot.img' in the downloaded Rom and flash through recovery.
1. LEWA OS
Link - http://narod.ru/disk/63368595001.b7...2.10.26_v_i9220_mod3rus_orkyz(zp100).zip.html
Flash through Clockworkmod Recovery.
Actually this rom is for 'Haipai I9220' device and It is from Russian Developer.
Credits go to 'Mr.MrorkyZ' - Russian Developer.
1 bug - There is no analog tv.
1.a) - LEWA LATEST BUILD (I tested)
http://disk.yandex.com/public/?hash=iNuFH9XZGuKIDKQiB8/qA3mkmt/zZRlVlRU1jgZptfY=
CREDITS GOES TO MR. SASHAML (RUSSIAN DEVELOPER - forum.china-iphone.ru)
No bugs for me... But there is no analog tv.
I have attached new LEWA BOOT IMAGE (zip file- you have to unzip) made by Mr. Vetal-ok , Russian Developer through my Request. All credits go to him. So replace the lewa boot image in the downloaded Lewa ROM.. means.. you have to unzip the file and replace the boot image, then again you have to make a zip for flashing through recovery..
2. MIUI
MIUI V4 works good in Our device.Only one problem (for me) - There is no analog TV. Firmware is from Haipai i9220 (Russian) forum.
Thanks to Mr.Cepexa and Mr.back37 , Russian Developers for their modified MIUI boot image for Our device.
Thanks to Mr.SashaML, Russian Developer for his MIUI firmware
Firmware Link - http://files.mail.ru/K0QEMD
1. Flash the firmware through clockworkmod Recovery.
2. Flash the 'attached 'dapeng A9230+ MIUI boot image' through clockworkmod recovery.
2.a) MIUI latest build here
http://files.china-iphone.ru/68rus_MIUI_10.12.12_i9220_e1809c_v75_gq1008_9p017.zip
CREDITS GOES TO ISTOMIN36 (RUSSIAN DEVELOPER - forum.china-iphone.ru)
Sorry friends.. the old attached MIUI boot image has camera shot problem.
So dont use. I have attached the new miui boot image .. Use that.
This New boot image also created by Mr.Vetal-ok, Russian developer (forum.china-iphone.ru)
After flashing the downloaded MIUI Rom file, flash the MIUI boot zip file through recovery.
Help please, Any Developer to port the original rom
Hellow Any Developer
Please help. I successfully rooted the device.
But I softbricked my device due to my simple mistake. While using ROM Toolbox lite, I tried to change the font.
I have no problem, while changing the fonts (downloaded through ROM toolbox}, I successfully changed the fonts.
But Yesterday night, I changed the font from local folder of device , Afterthat the device is not booting..Only Android logo.....
So I have to reflash the fimware... Any developer having firmware of this device..... please help..
In service center (chennai, India), also still Firmware not available...
I have seen the firmware topic in the following Russian website.
http://forum.china-iphone.ru/viewtopic.php?f=46&t=20476
But I cant understand clearly, because of unknown language (even using Google translator also)
So, please any Russian mates or Developers or Any Developer , please help.. Because I have no standby mobile..
Thanks.
Please send a mail to NXG - Pune (i am sure they will help you)
Dear Ramsuresh
Please send a mail to NXG-Pune and make a call to them, they will definetly send you firmware link & guide you
By the way
have tried factory reset from Recovery Mode...?
Regards
Arumugam
ramsuresh4 said:
Hellow Any Developer
Please help. I successfully rooted the device.
But I softbricked my device due to my simple mistake. While using ROM Toolbox lite, I tried to change the font.
I have no problem, while changing the fonts (downloaded through ROM toolbox}, I successfully changed the fonts.
But Yesterday night, I changed the font from local folder of device , Afterthat the device is not booting..Only Android logo.....
So I have to reflash the fimware... Any developer having firmware of this device..... please help..
In service center (chennai, India), also still Firmware not available...
I have seen the firmware topic in the following Russian website.
http://forum.china-iphone.ru/viewtopic.php?f=46&t=20476
But I cant understand clearly, because of unknown language (even using Google translator also)
So, please any Russian mates or Developers or Any Developer , please help.. Because I have no standby mobile..
Thanks.
Click to expand...
Click to collapse
I solved my problem myself
UParumugam said:
Dear Ramsuresh
Please send a mail to NXG-Pune and make a call to them, they will definetly send you firmware link & guide you
By the way
have tried factory reset from Recovery Mode...?
Regards
Arumugam
Click to expand...
Click to collapse
Dear friends,
I solved my problem myself. I got firmware from Russian friends and flashed successfully before 2 days. My only little issue is back camera gives inverted shots. I am searching for rear camera driver. Other than everything is well.
After sending mail to NXG , they sent firmware after 4 days. But that firmware gives error (flash scatter file is invalid) and I cant flash the NXG firmware.
hi.just wanna ask..can this recovery.img used in dapeng i9877?
thehaikal said:
hi.just wanna ask..can this recovery.img used in dapeng i9877?
Click to expand...
Click to collapse
hi，This is for Dapeng A9230 ±. I am not sure that this is for your device. Make a nandroid backup of your Rom , Then you can test this recovery.
Sent from my Dapeng A9230± using xda app-developers app
Hit Thanks
Rooting file - 26 downloads, recovery image - 21 downloads.
no one hitting thanks ?
there is an original factory firmware from russia forum come with flashtool, will upload link if anyone need it..
Send from my GT-N7000 using xda premium
e1808_v75_hjy1a6x (build -20120723) on my device with processor speed 1200Mhz..
e1808_v75_hjy1a6x_5647 (build -20120905) run 1001Mhz on my device..
Now using e1808_v75_jbl2_20120807 from N8000 on my device with 1200Mhz speed (kernel & driver remain e1808_v75_hjy1a6x_20120723)
ramsuresh brother, bout the miui rom. can this rom make a video call?
Sorry. There is no video call option presently in the Miui rom for this device. Maybe near future It may come.
Sent from my Dapeng A9230+ using xda app-developers app
Sorry for Very late reply. The above posted Roms are from Russian forum (forum.china-iphone.ru) only.
Sent from my Dapeng A9230+ using xda app-developers app
black_cappucino said:
ramsuresh brother, bout the miui rom. can this rom make a video call?
Click to expand...
Click to collapse
Sorry. There is no video call option presently in the Miui rom for this device. Maybe near future It may come.
Sent from my Dapeng A9230+ using xda app-developers app
alanccs said:
there is an original factory firmware from russia forum come with flashtool, will upload link if anyone need it..
Send from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sorry for Very late reply. The above posted Roms are from Russian forum (forum.china-iphone.ru) only.
Sent from my Dapeng A9230+ using xda app-developers app
People are simply downloading the files. No thanking mind. Only two persons have thanked me here. I am not a developer. But i have worked hard for this device..
thx for replying broth. maybe another trick for 3g video call? i think to add ics dialer or samsung dialer or something. not yet test, still wanna know your opinion broth.
Lewa TWRP Ported from stok fw
try this twrp broth. full touch. i use this twrp for 2 weeks, no problem, all function normal.
uma_DROID v1.0
uma_DROID v1.0
Custom ROM for Axioo PicoPad 5 (Indonesia)
[ Also Work for DAPENG A9230 - we have same machine]
HI guys, i made this custom rom just for fun. this is for Axioo PicoPad 5 GEA ( Indonesia). Actually have same machine with Dapeng a9230, so maybe you can install it to your device ( Im sure you can). Because i found the rusian stock rom for dapeng, and flash it to my GEA, and work like charm with no single problem on my GEA till now, thats why im sure you can install it to dapeng.
Thats it guys. Please read the information and the how to before you flash this rom. I have no responsibility if you brick your device because flash this rom to your device. Flash and Mod with your own RISK...!!!
- Lewa TWRP & Patch for 2GB System storage/500MB Internal sdcard included.
Code:
[CENTER]uma_DROID 1.0
ROM :
- 20120723_e1808_v75_hjy1a6x fw based
- Stock Axioo boot animation found inside axioo picopad 5 gea on facebook group
- 200dpi
- build.prob tweaked into Samsung galaxy tab 2, so you can install all apps inside market
- Moded Play store for density modifier, so you can change your lcd density to any value you want but you can install all apps inside market
- X-peria Launcher ported (my fav launcher ever)
- Jelly Bean Camera & Gallery found inside axioo picopad 5 gea on facebook group
- Keyboard : android keyboard (ics), X-peria keyboard & Samsung Keypad.
- No Live wallpaper, home screen tips
- No apps like facebook, ym, twitter, etc
- font changed to alex
- battery and wireless icon changed
- usb storage android logo changed to red devil android
- Sonny bravia engine tweak enabled
- better gps configuration for Indonesia
- init.d tweaks for : fast internet browsing, improved battery life, touchscreen more responsiv, little bit kernel tweak, zipalign all apks every boot, improve speed for x-peria launcher.
- build.prob tweaks for : better picture quality, better recording quality, lock launcher to memory, battery life, kernel error check disabled, more more deeper sleep, 3g tweaks, no black screen after call, video streaming, hsupa enabled, android logger disabled, dns tweak from common linux use google dns, & many more.
- default 500mb system and 2gb internal sdcard (use 2gb system storage to get 2gb system storage & 500mb internal sdcard - *zip file included)
- Lewa TWRP included (if you want, flash recovery via spft first or you can install it via mobileuncle after flashing this rom)
how to :
PLEASE BACKUP FIRST. If you brick your gea, i have no responsibilty for that.
PLEASE BACKUP IMEI FIRST. unless you will traped on invalid imei problem.
- download the file, extract it.
if you want, you can flash "2gbsystorage.zip" via recovery to turn your system into 2gb and internal sdcard into 500mb before you flash the custom rom.
inside you will find an archive named "uma_DROID_v1.0.zip". copy it to your sdcard, boot into recovery, and please DONT FORGET TO WIPE DALVIK, CACHE, & WIPE your device unless you will traped inside bootloop.
done.
note : If you want your phone rooted, install the "2gbsystorage.zip" after you flash the ROM, or if you want to flash the "2gbsystorage.zip" before you flash the ROM, you can r00t your phone via rooting tools[/CENTER]
DOWNLOAD :
HERE...!!!
black_cappucino said:
uma_DROID v1.0
Custom ROM for Axioo PicoPad 5 (Indonesia)
[ Also Work for DAPENG A9230 - we have same machine]
HI guys, i make this custom rom just for fun. this is for Axioo PicoPad 5 GEA ( Indonesia). Actually have same machine with Dapeng a9230, so maybe you can install it to your device ( Im sure you can). Because i found the rusian stock rom for dapeng, and flash it to my GEA, and work like charm with no single problem on my GEA till now, thats why im sure you can install it to dapeng.
Thats it guys. Please read the information and the how to before you flash this rom. I have no responsibility if you brick your device because flash this rom to your device. Flash and Mod with your own RISK...!!!
- Lewa TWRP & Patch for 2GB System storage/500MB Internal sdcard included.
Code:
[CENTER]uma_DROID 1.0
ROM :
- 20120723_e1808_v75_hjy1a6x fw based
- Stock Axioo boot animation found inside axioo picopad 5 gea on facebook group
- 200dpi
- build.prob tweaked into Samsung galaxy tab 2, so you can install all apps inside market
- Moded Play store for density modifier, so you can change your lcd density to any value you want but you can install all apps inside market
- X-peria Launcher ported (my fav launcher ever)
- Jelly Bean Camera & Gallery found inside axioo picopad 5 gea on facebook group
- Keyboard : android keyboard (ics), X-peria keyboard & Samsung Keypad.
- No Live wallpaper, home screen tips
- No apps like facebook, ym, twitter, etc
- font changed to alex
- battery and wireless icon changed
- usb storage android logo changed to red devil android
- Sonny bravia engine tweak enabled
- better gps configuration for Indonesia
- init.d tweaks for : fast internet browsing, improved battery life, touchscreen more responsiv, little bit kernel tweak, zipalign all apks every boot, improve speed for x-peria launcher.
- build.prob tweaks for : better picture quality, better recording quality, lock launcher to memory, battery life, kernel error check disabled, more more deeper sleep, 3g tweaks, no black screen after call, video streaming, hsupa enabled, android logger disabled, dns tweak from common linux use google dns, & many more.
- default 500mb system and 2gb internal sdcard (use 2gb system storage to get 2gb system storage & 500mb internal sdcard - *zip file included)
- Lewa TWRP included (if you want, flash recovery via spft first or you can install it via mobileuncle after flashing this rom)
how to :
PLEASE BACKUP FIRST. If you brick your gea, i have no responsibilty for that.
PLEASE BACKUP IMEI FIRST. unless you will traped on invalid imei problem.
- download the file, extract it.
if you want, you can flash "2gbsystorage.zip" via recovery to turn your system into 2gb and internal sdcard into 500mb before you flash the custom rom.
inside you will find an archive named "uma_DROID_v1.0.zip". copy it to your sdcard, boot into recovery, and please DONT FORGET TO WIPE DALVIK, CACHE, & WIPE your device unless you will traped inside bootloop.
done.
note : If you want your phone rooted, install the "2gbsystorage.zip" after you flash the ROM, or if you want to flash the "2gbsystorage.zip" before you flash the ROM, you can r00t your phone via rooting tools[/CENTER]
DOWNLOAD :
HERE...!!!
Click to expand...
Click to collapse
wow,great rom dude,i want to try it..but can you tell me how to back up imei?just in case if i get imei invalid,and what is the lewa twrp??
sorry for my noob,i'm new on this thing..
@Galon123
dude, to back up your imei, your phone must be r00ted. open your root explorer or similiar, go to " /data/nvram/md/NVRAM/NVD_IMEI/ ". You will find a file named "MP0B_001", copy it to your sdcard or maybe pc/laptop for future use. So you can paste it into the same folder, and you get your imei back if in case you traped inside "Invalid Imei" problem.
---------- Post added at 10:44 AM ---------- Previous post was at 10:39 AM ----------
Galon123 said:
wow,great rom dude,i want to try it..but can you tell me how to back up imei?just in case if i get imei invalid,and what is the lewa twrp??
sorry for my noob,i'm new on this thing..
Click to expand...
Click to collapse
black_cappucino said:
@Galon123
dude, to back up your imei, your phone must be r00ted. open your root explorer or similiar, go to " /data/nvram/md/NVRAM/NVD_IMEI/ ". You will find a file named "MP0B_001", copy it to your sdcard or maybe pc/laptop for future use. So you can paste it into the same folder, and you get your imei back if in case you traped inside "Invalid Imei" problem.
Click to expand...
Click to collapse
double post sorry.
Lewa TWRP :
Lewa (TWRP) touch recovery is a custom recovery built with ease of use and customization in mind. It’s a fully touch driven user interface, no more volume rocker or power buttons to mash.
Features:
-Graphical touchscreen interface with buttons and drag-to-scroll!
-Compressed backups that can save you up to 50% disk space
-Ability to choose which partitions to back up and which to restore
-Custom names for backups, rename and delete backups inside recovery
-Install Zip from SD card or internal storage
-Integrated Terminal Emulator
-Install queues allow you to install multiple zips in one go (e.g. CM9 zip together with gapps zip)
-Easy one-button cache & dalvik cache clearing after an installation
-Recovery settings are saved to the sdcard and persist through reboots
-File Manager that allows you to move, copy, delete and rename files and change their permissions
-Battery percentage indicator and clock (set your timezone in settings!)
-Power Off option
-Ability to partition SD Card with EXT3 or EXT4
-ADB support
-Detailed logfile
note : copy/paste from here.
The IWT come back - RELOADED - and presents
THETRUEJELLY
CUSTOM JELLYBEAN ROM FOR STAR B92M - ALL MODELS!!!!!
CHOOSE FROM:
NEW FUSION 2 - BASED ON LEWA OS 5.0
NEW JELLYBEAN 4.2.2 NEXT
JELLYBEAN 4.1.2 CLASSIC OR FUSION 2 - NEW!
Fusion 2 main features (BETA - only for 2012 models 1GB now)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- Based on Lewa OS 5.1 (actually stable 2014-02-14)
- Deep sleep bugs fixed (2.0.1)
- Fast and stable
- Almost all app are traslated (translation maded by JDStar)
- 3G Data/Wifi/TCP/DNS improvements
- New lock/unlock sound
Included app list in progress
NEXT
Main features (version 1.1):
- Based on G3 4.2.2 port
- NEW Xperia Z launcher and widgets
- Gravity Box 2.6.9
- Deep sleep bugs fixed
- Networks improvements
- Audio improvements
- New lock/unlock sound
- Everything works, digital compass included
- Root permissions with SuperSU app
- Clean, fast and stable
Included apps:
- Mobile Uncle
- Radaee PDF Reader
- OTA Updater
- Audiko
- Compass
- Youtube
- Tethering Shortcut (One click enable/disable tethering wifi)
- Waze
- Audiko (download your ringtones for free!)
- XDA Taptalk
- News Republic
- Clock widgets from Xperia Z
Classic main features
- Based on G3 stock rom 4.1.2
- No chinese or russian app FOREVER
- New default launcher NovaLauncher (from 1.2)
- Deep sleep works!
- Tethering WIFI works! (tnx to ervius app)
- TeamWin recovery
- Engineering and factory mode shortcut directly into settings > developer menu
- Reboot/Power Off and Recovery reboot
- SKYPE WORKS! (from 1.1) (see thumb at the end)
- Gps configuration for europe
- Voice call clarity (1.1)
- Improved jpeg and video rec quality (1.1)
- Battery save tweaks (1.1)
- Low battery warning set to 3%, no more deepsleep problem if battery is under 15% (1.2)
- OTA Update! Now update are simple with the app included! (1.2)
- Improved camera quality (1.3)
- Improved gallery (1.3)
- Improved GSM signal and 3G Data speed (1.3)
- New recovery TWRP 2.4.4.0 (1.3)
- Fixed update loop (1.3.1)
- Deodexed all app and jar (1.3.1)
- Auto wiping of cache and dalvik on installation (1.3.1)
Included app
- Adaway (remove ads)
- News Republic (newsreader)
- Google Keep (notes synchronized with your google account)
- Youtube
- AutoClean (one touch remove background running apps)
- Holo torch (simply flash torch)
- Tethering Shortcut (One click enable/disable tethering wifi - 1.1)
- ES File Manager (1.1)
- Waze (social-navigation software - 1.2)
- Audiko (download your ringtones for free! - 1.2)
- XDA Taptalk (1.3)
- CameraMX (1.3)
- Removed touchpal keyboard (crash - 1.3.1)
- Fixed Youtube app (1.3.1)
and sorry for the gps but...IT WORKS! (see thumb at the end)
CHANGELOG 1.4.0 OTA UPDATE
- New Xperia lockscreen with Droid font
- HD screen resolution upgrade
- Battery icon changer
- 3G Data/Wifi/TCP/DNS improvements
- Bluetooth improvements and fix
- New lock/unlock sounds
- PDF reader app
IF YOU WANT TO RETURN TO STANDARD RESOLUTION INSTALL VIA RECOVERY THIS FOR 1GB ------- THIS FOR 512MB
IF YOU WANT 2.5GB OF INTERNAL STORAGE
WARNING: do this procedure AFTER flash a stock rom, NOT AFTER flash an IWT ROM!
IMPORTANT: after the flash you have to wipe ALL DATA
- Dowload THIS
- Load the scatter
- If you have the original recovery change the recovery in the package with TWRP (DOWNLOAD). If you already have the TWPR recovery deselect the checkpoint of recovery
- Flash and reboot in recovery mode
- In recovery mode do a wipe of data and cache (factory reset in TWRP)
- Reboot and enjoy
FIRST INSTALLATION FOR 2012 MODELS - CLASSIC ROMS
- Download the IWT UNIVERSAL BASIC ROM zip and the update zip rom for your phone (1.3.1 actually for both)
- If you came from another custom rom please return to 4.1.2 stock rom (see the tutorial) and AFTER install iwt rom
- Boot into recovery mode and flash the zip file
- Reboot system
- Make the initial welcome setup
- Reboot system into recovery mode and flash the update zip rom - WIPE CACHE AND DALVIK NOT NEEDED
- Reboot and enjoy
FIRST INSTALLATION FOR 2012 MODELS - FUSION ROMS
- Make a backup of your data first! Selective backup (eg. Titanium Backup) of apps/contacts/messages BUT NOT VARIOUS SETTINGS (system, network etc.)
- Download the IWT FUSION ROM zip
- If you came from another custom NON IWT rom please return to 4.1.2 stock rom (see the tutorial) and AFTER install iwt rom
- Boot into recovery mode and flash the zip file
- Wipe data/factory reset
- Reboot
IMPORTANT!
After initial setup:
- Open the app mtknoled and press read setting then press LED disable and close (this fix DS bugs)
- Enable root under developer menu
- Disable recommendation chinese app under home (home settings)
- Open power+ app and set low battery popup at 5%
- (Optional) disable lewa anonym stats under security settings
Then reboot and enjoy!
FIRST INSTALLATION FOR 2012-2013 MODELS - NEXT ROMS
- Make a backup of your data first! Selective backup (eg. Titanium Backup) of apps/contacts/messages BUT NOT VARIOUS SETTINGS (system, network etc.)
- Download the IWT NEXT ROM zip
- If you came from another custom NON IWT rom please return to 4.1.2 stock rom (see the tutorial) and AFTER install iwt rom
- Boot into recovery mode and flash the zip file
- Reboot, no wipe data/cache/dalvik needed
TETHERING WIFI
- At first boot just authorize super user permission to tether JB app (pop-up comes automatically)
RESET TO 4.1.2 STOCK ROM FOR 2012 MODELS
- Take a full stock rom - Stock 4.1.2 HERE
- Add the Uboot.img DOWNLOAD
- Change the original recovery with TWRP (DOWNLOAD)
- DOWNLOAD flashtool, return to stock rom using the function "FIRMWARE UPGRADE" instead of "DOWNLOAD"
RESET TO 4.1.2 STOCK ROM FOR 2013 MODELS
- Take a full stock rom - Stock 4.1.2 HERE
- Change the preloader and dsp_bl files with THIS
- Change the original recovery with TWRP (DOWNLOAD)
- Use flashtool inside the stock rom, return to stock rom using the function "FIRMWARE UPGRADE" instead of "DOWNLOAD" if possible
IF FLASHTOOL GIVE ERROR 4xxx or 3xxx or SOC verification failed
Try to use THIS version of flashtool
ROOT FOR ALL PHONE WITH STOCK ROM
Once you have restored stock rom as described you can obtain root user permission by installing THIS zip file in recovery mode
USE AT YOUR OWN RISK!
DOWNLOAD LINKS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FOR ALL 2012 PHONES (BOTH 512 and 1GB RAM)
IWT UNIVERSAL BASIC ROM FOR 2012 MODELS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MODEL YEAR 2012 PHONES - 1GB RAM
IWT NEXT VERSION 1.0 FINAL FOR 1GB 2012 MODELS -> VIA OTA UPDATER APP (INCLUDED) UPGRADED TO VERSION 1.1
IWT CLASSIC VERSION 1.3.1 FOR 1GB 2012 MODELS
IWT FUSION RC1 FOR ALL 2012 MODELS - NOT FOR 2013 FOR NOW!
IWT FUSION HOTFIX-1 - PLEASE APPLY!
IWT FUSION 2.0.1
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MODEL YEAR 2013 PHONES - 1GB RAM
IWT NEXT VERSION 1.0 FOR 1GB 2013 MODELS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MODEL YEAR 2012 PHONES - 512MB RAM
IWT CLASSIC VERSION 1.3.1 FOR 512MB MODELS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
TOOLS AND MISC-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DeepSleep FIXER! For Stock/Classic Rom (2012 models and 2013 models) PLEASE INSTALL ON STOCK/CLASSIC ROMS!!!!
Guide for DS Fixer:
- Install the apk
- Open and press READ SETTING then press LED DISABLE
- Exit and reboot (permanent fix)
Original JB Launcher - To set as default launcher: copy and overwrite the file inside system/app with root explorer or another file manager. Set permission RW-R--R--
TWRP Recovery
OFFICIAL IWT WALLPAPER (see preview below)
OTHER GPS.CONF FILES
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FAQ
Q: I have 2012 or 2013 model?
A:
Download root explorer
Go to system/lib/modules
See if the properties of wlan.ko file, after the date and permissions, are -> wlan_mt6628.ko
If yes you have the 2013 version, if is -> wlan_mt6620 you have the 2012 version
HOW TO
Improve GPS antenna - Difficulty: MEDIUM - guide by Robsup79 - ideas from Frandroid Forum
Scratch tint to the left of the flash of about 8x3 mm
Cut 2mm of copper with a cutter as show, this operation unwire the original antenna from the connector
Isolate with electrical tape to avoid interference, leaving 3x3mm copper contact
Put the new antenna, secure it with a small piece of tape on the bottom to ensure the contact
If you have curved smoothly, the installation of the cover will press to ensure good contact
Good work...but my wi-fi and bluetooth no work ?!
dingila said:
Good work...but my wi-fi and bluetooth no work ?!
Click to expand...
Click to collapse
Probably you have the b92m 2013 version, i think it's a baseband or a kernel problem. I need a full stock ROM dump for the 2013 version then i can try to solve this problem
Sent from my B92M using xda
Rom for 2013 READY!!!! SEE LINKS!!!!
Hi!
Can you please give a bit more details about the 2.5GB internal memory option?
Does all B92m can have that 2.5GB?
Mine does with the ROM that I am using actually. So what should I do if I wan't to keep it when moving on your ROM?
Some help would be useful since I don'T understand much about the other post.
Thanks!!!
jy_P said:
Hi!
Can you please give a bit more details about the 2.5GB internal memory option?
Does all B92m can have that 2.5GB?
Mine does with the ROM that I am using actually. So what should I do if I wan't to keep it when moving on your ROM?
Some help would be useful since I don'T understand much about the other post.
Thanks!!!
Click to expand...
Click to collapse
The 2.5gb option expand the internal memory storage to 2.5gb, that's all You can install the rom and and after apply the option if you want, remember that if you do this you have to wipe data, that means factory reset.
Hi,
I have tested to install your rom (2012) but I have B92M with 512Mb ram and the phone don't boot.
I view all animation started but I have also a "Low Memory" and the phone reboot at this moment.
zuan35 said:
Hi,
I have tested to install your rom (2012) but I have B92M with 512Mb ram and the phone don't boot.
I view all animation started but I have also a "Low Memory" and the phone reboot at this moment.
Click to expand...
Click to collapse
In this morning i post a rom for 512mb version with stock launcher, i think this is the problem. Sorry for the inconvenience!
Simonkjam said:
In this morning i post a rom for 512mb version with stock launcher, i think this is the problem. Sorry for the inconvenience!
Click to expand...
Click to collapse
No pb I will test after you have post rom for 512.
Thx
zuan35 said:
No pb I will test after you have post rom for 512.
Thx
Click to expand...
Click to collapse
Rom for 512mb upgrading some staff but coming soon!
how can I check that I have version (2012 or 2013). after checking the first replace the recovery.img file in the zip file, copy the IWT JB Final.zip to your phone. fire up recovery mode and do the upgrade.
asking for a little help, because I do not want to mess up the phone.
permanent27 said:
how can I check that I have version (2012 or 2013). after checking the first replace the recovery.img file in the zip file, copy the IWT JB Final.zip to your phone. fire up recovery mode and do the upgrade.
asking for a little help, because I do not want to mess up the phone.
Click to expand...
Click to collapse
Buy year? 2012 or 2013? And the phone was presented as "NEW B92M" or "B92M" ?
Yes first you have to flash the TWRP recovery in your phone, after reboot in recovery and do the upgrade (wipe data/cache/dalvik first)
Hello,for me this rom it's to be the best,and i want to say thank you to Simonkjam :fingers-crossed: !!!
I've resolved all the problems about the software and,finally,all the problems about the gps (all settings are perfect without having to change nothing) together with this guide:
1/scratch tint to the left of the flash of about 8x3 mm
3/isolate with electrical tape to avoid interference, leaving 3x3mm copper contact
4/put the new antenna, secure it with a small piece of tape on the bottom to ensure the contact
If you have curved smoothly, the installation of the cover will press to ensure good contact
P.S. Sorry for my "English"
Simonkjam said:
Buy year? 2012 or 2013? And the phone was presented as "NEW B92M" or "B92M" ?
Yes first you have to flash the TWRP recovery in your phone, after reboot in recovery and do the upgrade (wipe data/cache/dalvik first)
Click to expand...
Click to collapse
somehow I bought the phone in mid-January, has 1GB RAM, 2.5 rom. that is, unless it's the new.
in the description it said "* NEU * EZIO S92 4.7-inch 1GB-RAM ANDROID 4.0 GPS 12.0MP HD ..." .....
I downloaded the recovery.img file from the link TWRP Recovery.
swapped it with the original file contained in the ROM.
'll copy the rom to your phone
Now you only need to start the recovery mode and do the upgrade?
permanent27 said:
somehow I bought the phone in mid-January, has 1GB RAM, 2.5 rom. that is, unless it's the new.
in the description it said "* NEU * EZIO S92 4.7-inch 1GB-RAM ANDROID 4.0 GPS 12.0MP HD ..." .....
I downloaded the recovery.img file from the link TWRP Recovery.
swapped it with the original file contained in the ROM.
'll copy the rom to your phone
Now you only need to start the recovery mode and do the upgrade?
Click to expand...
Click to collapse
Yes but i've a test to see if you have 2012 or 2013
- Download root explorer
- Go to system/lib/modules
- See if the properties of wlan.ko file, after the date and permission, are -> wlan_mt6628.ko
- If yes you have the 2013 version, if is -> wlan_mt6620 you have the 2012 version
For 2013 version probably tomorrow we post the upgraded and (hope) working rom, for 2012 you can use the actually rom
Simonkjam said:
Yes but i've a test to see if you have 2012 or 2013
- Download root explorer
- Go to system/lib/modules
- See if the properties of wlan.ko file, after the date and permission, are -> wlan_mt6628.ko
- If yes you have the 2013 version, if is -> wlan_mt6620 you have the 2012 version
For 2013 version probably tomorrow we post the upgraded and (hope) working rom, for 2012 you can use the actually rom
Click to expand...
Click to collapse
is write on wlan.ko file --wlan_mt6620.ko
permanent27 said:
is write on wlan.ko file --wlan_mt6620.ko
Click to expand...
Click to collapse
Ok, 2012 version, you can use the 2012 rom 1gb
Simonkjam said:
Ok, 2012 version, you can use the 2012 rom 1gb
Click to expand...
Click to collapse
sorry for that. but I have to be sure:
1 replace the file recovery.img in the original ROM
2 lose rom zip file to your phone
3 fire recovery mode
4 do first wipe all or after installation
5 Reboot your phone and it should work all right?
I have installed it on my 2012 and so far so good. Good performance. No bug in the display as I have experiment with other ROMs. I think you should give your reference about the Antena though... This comes from Frandroid right?
I would like to get the 2.5 GB internal space. So, How could I do that? Could you please give a short list of the steps?
Thanks a lot! I'll get back in a few days when I would have tested it a bit more!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my custom ROMs and Recoverys for the ASUS Memo PAD HD 7.
You'll also find how to Unlock the bootloader (mandatory to flash any custom Recovery and Rom)
Please be sure to read (and re-read) this carefully in order to avoid unnecessary questions.
My Custom ROMs / Recoverys and also the provided Stock Rom will work on both 8 GB / 16GB WW and US Models
(The RU Model is also supported, however with limited GPS support)
Code:
[COLOR="blue"]For Instructions:Check Posts #2 and #3
Downloads on Post #4
To Flash the Asus Stock Firmware: Check Post #5 [/COLOR]
AOSP Rom
AOSP JB4.2.2:
Changelog Build 01 - 20160929
Compiled from source (except Kernel - prebuilt ... only modifications on kernel's initramfs)
Everything working (as far as i tested)
Latest GAPPS included + some Google newest Goodies
Latest Stable SuperSU v2.78 included (rom is rooted ye)
Some special goodies added on rom's source (battery % , etc), not part of AOSP
Requires: Unlock Bootloader + Custom Recovery (the usual)
Full wipes recommended , so backup , backup...
Download: https://www.androidfilehost.com/?fid=529141701856462352
I'll upload Rom later into XDA DevDB , always good to have a mirror...
Changelogs Rom 4
Asus VibeUI JB4.2.2:
Changelog v2.0 (August 02 2015)
New Build
Both Cameras working (front and rear)
Added Custom (stock) Asus camera is also working (AOSP/ASUS cameras included)
New Modified working MTK Engineer Menu ( settings> Mod)
Multi-User support (settings> Mod)
Improved Dolby Sound
Gapps included (updated and working)
Some VibeUi Lenovo apps updated (including new Launcher/ theme Manager)
Ported more Asus apps (widgets)
There's several other fixs, this build was being worked out for some time ...
Changelog v1.0 (August 31 2014)
Based on Lenovo's VibeUI, ported to our tablet and with extra features:
--> Lenovo's VibeUI, it's still AOSP Based
Dolby Surround Sound (Only tested on 16GB Model)
Multi language
Theme Manager
Advance Power Manager features
Beutifull Lenovo's apps
Other features
Also Merged The following Asus apps:
AsusCalendar
AsusStory
ASUSStudio
AsusTask
Other features:
Front Camera works (Only tested on 16GB model)
Up to date GAPPS included
Rooted
busybox
Patched hosts file
GPS config improved
Not working:
Main camera (rear) --> Depending in your hardware revision; Most users will have working rear camera
Flash Instructions / Requirements:
Unlocked Bootloader
CWM / Carliv recovery
Instalation:
- Full wipes
DEPRICATED ROMs
Changelogs Rom 1
Android 4.2.2 (JB) Based custom ROM (Stock Based):
Changelog Build v1.1 R2 (November 13 2013)
Camera buttons layout fix
Calendar sync fix
Old Builds ChangeLogs:
Changelog Build v1.1 (November 10 2013)
Added the following Android 4.4 kitkat Goodies:
Apps
Bootanimation
QuickOffice
And other necessary system files
Added both USB connection modes:USB Storage and MTP Mode(internal storage now available via MTP)
Removed CPU Governor switcher
Added Performance Control (in System Settings) with several CPU/System Mods
Added in-built Xposed framework and Gravity BOX (Several System Modifications and tweeks)
Added AsusAppLocker (Requested by several Users)
Added pictures and video tweeks
Cleaned and modified some System Interface Code
Fixed some init.d perms
Changelogs Rom 2
AOSP Android 4.2.2 (JB) ROM:
Changelog BETA v2.0 (February 08 2014)
Fixed alot of issues on the core system
Internal Storage is now readable/writable
Emulated Storage is now readable/writable
App Instalation is Fixed
Update BusyBox
Update SuperSU
Update GravityBox; Xposed Framework (Fully Working since this is AOSP)
And several other Fixs
NOT Working:
Cameras (front and rear)
Needs further work:
External Storage, will be available once you take your SDCard off, and insert again.BUT can cause random reboots.
BT, will give you FC when you turn on, but it works OK
You tell me
In addition to the ROM changelog:
External SDCard: as I said it can cause random reboots, also if you reboot the TAB it can cause bootloops,in this case just remove the SDCard and the TAB will boot just fine. Last case scenario, remove the SDCard and wipe dalvik
Benchmarks: Well its noticeable the increase in speed and less RAM usage on the AOSP Betas.
Some guys are asking me why the Antutu scores are so similar with the stock Asus/And my custom ROM?
Well you should check the ram usage/FPS between the ROMs And since the Aosp doesn't fully support the external SDCard, this will give about less 2k on Antutu scores (Storage IO / database IO)
So... If you really want to compare Antutu scores, remove your External SDCard from the stock Asus/ V1.1r2 Roms.
Changelogs Rom 3
Android 4.2.2 (JB) Based custom ROM:
Based on the new official Android 4.2.2 ROM
WW OTA (ME173X_WW_user_4.2.4.04152_20140714)
From July 14 2014
Kernel 3.4.5
Stock Flashable ROM
Replace the new OTA kernel from the older one (November 28 release), since the last one is more stable
Rooted
Flash Instructions / Requirements
Unlocked Bootloader
CWM / Carliv recovery
Instalation:
- Full wipes
GPL Compliance:
Kernel 3.4.5
(My repo containing ASUS released Kernel Source, that are FAKE... )
All the ROMs, and Recoverys are using the Stock prebuilt Kernel
My Github Repo
Credits
SuperDragonPT laugh: )
Carliv (For the awesome Carliv Touch Recovery)
Koush (For the CWM Base)
Enriki (from the forum 4pda.ru),(For the "Service Firmware/Unlocked Bootloader")
shoxxy (for letting me know the Russian's work)
iBotPeaches, brut.all (for apktool)
amarullz (for AROMA Installer)
Chainfire (for SuperSU)
rovo89 (for the AWESOME Xposed Framework), Learn More Here
C3C076 (For the AWESOME Xposed GravityBox module), Learn More Here
h0rn3t and educk (for Performance Control), Learn More Here
ViPER520 and zhuhang (for ViPER4Android Audio Effects ), Learn More Here
XDA:DevDB Information
[RECOVERY] [ROMs] ASUS Memo Pad HD 7 (me173x) [MULTILANG], ROM for the Android General
Contributors
superdragonpt
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2013-11-10
Last Updated 2016-09-28
Unlocking Bootloader and Flashing the Custom Recovery: PART #1
Unlocking Bootloader and Flashing the Custom Recovery: PART #1
Unlocking Bootloader and Flashing the Custom Recovery: PART #1
- Special TAB Format:
Make Sure your Tablet is fully Charged
Make Sure the Drivers are installed (For Detailed Drivers instalation Instructions, please check this thread)
Copy my Custom ROM (Asus_ME173X_v x.xx.zip), to the EXTERNAL SD Card, BEFORE you start the next steps...
Now in the "Download Section" get the Stock Asus Rom-and-bootloader.zip[/URL]
Included in the .zip are :
-The USB VCOM drivers and the SP_Drivers_v1.5 (Last Ones are Opcional), the VCOM Drivers alone should be enought.
- The Flash Tool
-The Asus Stock Firmware ME173X_WW_user_4.2.4.06716_20130918 (STOCK Rom; Locked Bootloader; Stock Recovery)
Open the Flash_tool.exe.
(1) Click on Scatter_Loading and choose the "MT6589_Android_scatter_emmc" from the "signed_bin" thats inside the Firmware Folder.
(2) At Flashtool Click Window and choose Write Memory
Next, Click Write Memory, Open Raw and choose the "sro-default-lock-sign.img" file from the "signed_bin" Folder.
Memory Settings must be "EMMC"
Before Flashing: Everytime when you Click on the button to Flash , the Memopad must be TURNED OFF and DISCONNECT from the PC.
After you Click on the write memory Button Connect the Pad to your PC.
The Flash Progress should beginn, when it succesfully Finished A Green Ring will shown.
Disconnect The Pad from PC
Click: Special Format #1 Settings just like in the Picture.
Click "OK" and Start the Flash Progress shown above !
After pressing "OK" connect your Tab to PC
Disconnect The Pad from PC
Next:
Click: Special Format #2 Settings just like in the Picture.
Click "OK" and Start the Flash Progress shown above !
After pressing "OK" connect your Tab to PC
Disconnect The Pad from PC
Your MemoPad is Sucessfully Formated Now lets Flash the Preloader :
Go to the Flashtool main Screen Click "Scatter_loading"
Now this Time choose the " MT6589_Android_scatter_emmc " from the root Folder.
(See next Pictures)
When you finnaly click on "Download" the following warning will appear, just press "YES"
After pressing "YES" connect your Tab to PC
Then, When The Green Ring appears Your MemoPad is Sucessfully Formated :fingers-crossed:
Disconnect The Pad from PC
(Tut from our Russian Friends and translated by our friend shoxxy)
Now You can jump to PART #2
Unlocking Bootloader and Flashing the Custom Recovery: PART #2
Unlocking Bootloader and Flashing the Custom Recovery: PART #2
Unlocking Bootloader and Flashing the CWM Based Recovery: PART #2
Download From the "Download Section" the Unlock_Bootloader install_Recovery.zip
Turn OFF the TAB
Do NOT Connect your TAB at the PC at this Stage
On the "Flasher" folder open the "Flash_tool.exe"
Then select "scatter loading" , go to the "Unlock_Bootloader install_Recovery" folder, and select the "MT6589_Android_scatter_emmc.txt"
Then press "Download"
This Message will pop-up, press "Yes"
Now Connect the TAB to PC (USB), DONT Turn it ON, keep the TAB OFF
You will hear an sound, and the flash will start
In the end, IF all is done correctly, you will see this Picture.
Congrats you now have your TAB with an CWM Based Recovery (the Carliv Touch Recovery), and the Bootloader is Unlocked
Now all you need is, is to flash my Custom Rom :laugh:
Navigation under recovery mode / Flashing the Rom:
Turn the TAB On, with the Power and Volume UP Keys (Keep The keys Pressed)
You will see the "Select Boot Mode" Menu (Check the picture)
Using the Volume UP Key, navigate to the "Recovery Mode", then Press the Volume Down Key to Select.
NOW, you will have acess to your Costum Recovery (The Recovery is Up side Down), this is NORMAL, and this happens on some new SoC's.
To Navigate on the Recovery you can use the Volume UP/Down Keys, OR You can use the Touch Buttons
Flashing The ROM:
Wipe Data / factory Reset
Wipe Cache
Advanced > Wipe Dalvik Cache
Install zip> Choose zip from sdcard
And just follow the on-screen instructions ...
System will reboot itself, when the instalation is completed
Don't worried, the first boot takes an little bit more time !
If you didnt copied the ROM to your SD Card:
Navigate on Recovery:
Mounts and storage>mount USB storage (now you can copy/paste the ROM to the SD card)
Or if you cant connect the phone to PC (Bad drivers, etc), use adb sideload:
This Recovery Supports the Aroma File Manager
Whats this? Check here
Download the Aroma File Manager
Then just copy the aroma .*zip into the "Clockworkmod" folder on the root of your SD Card
Download Aroma File Manager
MD5:19c8e9cb2e833cad74a09ad11af40445
DOWNLOADS
ROMS:
ROM VibeUI v1.0
https://www.androidfilehost.com/?fid=95916177934535008
ROM ME173X_v1.1_R2
https://www.androidfilehost.com/?fid=95916177934535951
ROM ME173X_WW_user_4.2._20140714 (Modified Official ASUS OTA)
https://www.androidfilehost.com/?fid=95916177934535953
CUSTOM RECOVERYS:
Carliv Touch Recovery (CWM) v2.1
https://www.androidfilehost.com/?fid=95916177934535012
Carliv Touch Recovery (CWM 6.0.4.4) v2.5
https://www.androidfilehost.com/?fid=95916177934535952
OTHERS:
Unlock_Bootloader+install_Recovery
https://www.androidfilehost.com/?fid=95916177934535013
Stock+Asus+Rom-and-bootloader
https://www.androidfilehost.com/?fid=95916177934535113
Asus_stock_camera
https://www.androidfilehost.com/?fid=95916177934535114
RETURNING to The Stock ASUS Rom, and Locked Bootloader
RETURNING to The Stock ASUS Rom, and Locked Bootloader Returning your Tablet Back to Stock
Download the "Stock Asus Rom-and-bootloader.zip" available in the "Download" Section.
It includes the Asus Vcom Drivers, Flash Tools and the Stock Firmware (Rom, Locked Bootloader, etc)
This will flash The STOCK ASUS Odex ROM/ Locked Bootloader / Stock Recovery
Your Tablet will be 100% Stock (This is good in case you need to return your Tablet/ Guarantee)
INFO:
Buid: ME173X_WW_user_4.2.4.06716_20130918
Android OS: JB 4.2.2
OTA Works (The Official ASUS Update) Recap Instructions:
Tablet MUST BE TURNED OFF, and with full battery
The VCOMM Drivers MUST be installed
Flashing:
Open the Flasher Folder:
Open the *.exe file "Flash_tool.exe"
Click on "Scatter-loading"
Open the "MT6589_Android_scatter_emmc.txt" That's inside the "signed_bin" Folder
Press "Download"
-- Now connect the Tablet to PC, the flash will start.
If all works OK, you will see an green circle in the End.
--Disconnect your Tablet from the PC
Now Click again on "Scatter-loading"
Open the "MT6589_Android_scatter_emmc.txt" BUT THIS TIME select the other scatter file from
the main firmware folder
You will see that this time ONLY the preloader is selected to be flashed...
Press "Download"
-- Now connect the Tablet to PC, the flash will start.
If all works OK, you will see an green circle in the End.
CONGRATS your Tablet is in STOCK Condition now !
Thank you very much, you add the last image rom too
awesome....
thank you verymuch
Wow. Any screenshots? I'm downloading the ROM now.
Thanks!
Awesome!!! I was a litter expecting 4.3 though. But the custom recovery is too good already.
Got this error, couldn't flash the custom recovery
Fixed that error, now I get this
BROM ERROR : S_SECURITY_SEC_CFG_IMAGE_CUST_NAME_MISMATCH (6074) , MSP ERROE CODE : 0x00.
Great work man. Only one question. How to lock bootloader again?
Sent from my GN
@superdragonpt thanks a lot man, finally we can backup our systems and install other roms. Great work.
tt2
ericmaxman said:
Got this error, couldn't flash the custom recovery
Fixed that error, now I get this
BROM ERROR : S_SECURITY_SEC_CFG_IMAGE_CUST_NAME_MISMATCH (6074) , MSP ERROE CODE : 0x00.
Click to expand...
Click to collapse
EDITED:
New Instructions in the OP
Please check Posts # 2 and 3
superdragonpt said:
Strange, did you tried downloading The file again and test?
last case scenario, it was an bad upload,.
if someone else is getting the same error, please Report .
Click to expand...
Click to collapse
Tried from 2 separate notebooks, same error..
Maybe you have to follow the first steps described here:
http://forum.xda-developers.com/showthread.php?t=2339895&page=30
Here the sro-default-lock-sign.img is preloaded
The preloader is included on The .zip
The flash tool wont load if The preloader isnt present.
i will look at it, on my launch break, dont worry.
but i still need to know if enyone else is getting this error
EDITED:
New Instructions in the OP
Please check Posts # 2 and 3
Is it possible to flash without loosing all user apps and data?
Do a TB backup first.
Powered by Galaxy Note
kanefan67 said:
Is it possible to flash without loosing all user apps and data?
Click to expand...
Click to collapse
First root with farmaroot (search in xda)
Than instal titanium backup and backup all user apps.
Than do all the things n the fiat poat of this thread.
And restore with titanium backup afterwards.
Sent from my GT-I9070 using xda app-developers app
This Is the first Rom for Walton Primo C2, Prime 350D, or lava 352e.
Intro:
This is a Stock based custom Rom. made from Walton primo C2 firmware. This is a bare-bone type rom. Meaning it has no GAPPs only the absolutely necessary applications, so anything you want to do, you have to install the app yourself. like for video playing install a video player :silly:
Features:
Code:
New animation added
Bravia Engine Added
xloud and as!d engine added
Improved audio and music quility
Fully optimized and tweaked
Root access
Unsecured boot.img
Newest BusyBox
RAM optimizations
Improved virtual memory management
Speed optimizations
Enabled GPU UI rendering
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All /system applications updated to latest available
All /data applications updated to latest available
Improved CPU governors performance
Most optimal system scheduler
Disabled kernel debugging for better performance
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
init.d scripts (BusyBox run-parts) support
Auto init.d permissions set on boot
Excellent battery life!
Most up-to-date system files permissions
[*]...and many more!!!!!!!!!!!!
Installation Instructions:
............................................................................................
1st : install the Driver.
2nd : Open the Flash tool (flash_tool.exe)
3rd : click Scatter loading. and select the scatter file in Crow rom folder.
4th : click "download",
remove the battery,
then put it back and plug the phone (turned off)
5th : Wait for Download to finish. after download finishes, remove the battery again.
put it back, and press vol+ and power button at same time.
6th : when you see CWM menu, go to wipe menu--> select wipe data fectory reset.
7th : reboot the phone.
8th : Enjoy.
{{{{{..........................................................................................................
For prime 350D users only
1. you have to select the scatter file on " For prime 350D users use this scatter file " folder.
2. then set the android path to crow roms "system.img"
3. then press download.
rest is the same.}}}}}}
if you get the problem "no network", try turn on and off airplane Mode. that fixes the problem 90% of the time.
Follow the instruction very carefully. i am no way responsible if you brick your device.
i made the instructions noob friendly.
try to follow it.
............................. Enjoy
.............. By : Ali Reza
Also instructions are added on the 7zip file.
I am No Way Responsible if you brick your Device
Click to expand...
Click to collapse
If you share my work at least have the decency to give credit. Do not copy and release it on your name.
Click to expand...
Click to collapse
Click Download For Download :laugh:
Password for Flash tool is "qwas"
Download
For prime 350D users download this files too. and follow the instruction inside
350D Download
XDA:DevDB Information
Crow Rom, ROM for all devices (see above for details)
Contributors
Ali Reza
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Created 2014-05-10
Last Updated 2014-05-12
Reserved
You can follow this tutorial for flashing this rom.
https://www.youtube.com/watch?v=ztI8sc8MUNo
350D users
here is a example how it should look
Ali Reza said:
This Is the first Rom for Walton Primo C2, Prime 350D, or lava 352e.
Intro:
This is a Stock based custom Rom. made from Walton primo C2 firmware. This is a bare-bone type rom. Meaning it has no GAPPs only the absolutely necessary applications, so anything you want to do, you have to install the app yourself. like for video playing install a video player :silly:
Features:
Code:
New animation added
Bravia Engine Added
xloud and as!d engine added
Improved audio and music quility
Fully optimized and tweaked
Root access
Unsecured boot.img
Newest BusyBox
RAM optimizations
Improved virtual memory management
Speed optimizations
Enabled GPU UI rendering
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All /system applications updated to latest available
All /data applications updated to latest available
Improved CPU governors performance
Most optimal system scheduler
Disabled kernel debugging for better performance
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
init.d scripts (BusyBox run-parts) support
Auto init.d permissions set on boot
Excellent battery life!
Most up-to-date system files permissions
[*]...and many more!!!!!!!!!!!!
Installation Instructions:
............................................................................................
1st : install the Driver.
2nd : Open the Flash tool (flash_tool.exe)
3rd : click Scatter loading. and select the scatter file in Crow rom folder.
4th : click "download",
remove the battery,
then put it back and plug the phone (turned off)
5th : Wait for Download to finish. after download finishes, remove the battery again.
put it back, and press vol+ and power button at same time.
6th : when you see CWM menu, go to wipe menu--> select wipe data fectory reset.
7th : reboot the phone.
8th : Enjoy.
{{{{{..........................................................................................................
For prime 350D users only
1. you have to select the scatter file on " For prime 350D users use this scatter file " folder.
2. then set the android path to crow roms "system.img"
3. then press download.
rest is the same.}}}}}}
if you get the problem "no network", try turn on and off airplane Mode. that fixes the problem 90% of the time.
Follow the instruction very carefully. i am no way responsible if you brick your device.
i made the instructions noob friendly.
try to follow it.
............................. Enjoy
.............. By : Ali Reza
Also instructions are added on the 7zip file.
Click Download For Download :laugh:
Password for Flash tool is "qwas"
Download
For prime 350D users download this files too. and follow the instruction inside
350D Download
XDA:DevDB Information
Crow Rom, ROM for all devices (see above for details)
Contributors
Ali Reza
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Created 2014-05-10
Last Updated 2014-05-12
Click to expand...
Click to collapse
Hats off to u!!!
Let me ask u some important Question:
How can i customize stock rom
and make it againg flashable so that
flashtool can flash it like stock rom.
Thanks in advance!!! :good::good::good:
I am a Primo C2 user.
Sound good but after installation I have stuck on boot screen
Disclaimer
Your warranty is now void;
I am not responsible for bricked devices, dead SD cards ;
Please do some research if you have any concerns about Custom Build Roms before flashing it;
#FAQ
Q : Which recovery should I use?
A : Latest TWRP available for your device.
Q : How to flash ?
A : do a Full wipe Then flash the rom.
CREDITS
@NeoHBz (J210F Radical OLD & Revamp port)
@kwshl (Radical Reloaded fix.zip)
@milon87 ( In call ui, lock screen fix)
@asarre (wifi and app fixes)
@moluntic
@deepanshu
#Rom Information
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Based On: Stock Firmware (Enforcing)
Bugs till found 1. Clock Ringtone Bug
2. Prebuild bluelight filter
Install Process
1. Unzip the file that you will get on download link. (For J2 (6), download ....J210f.zip & for J2 PRO, download ....J2 PRO.zip)
You will get 4 folders when the unzip was done.
2. Go to TWRP and wipe all. (Make sure that you have backup your all data)
3. Go back and click install
go to the folder Radical Experience OLD (J210f) or Revamp (J2 PRO) and select the zip and install normally.
4. Go back and install the following zip in order i said below...
1st - wifi fix zip 2nd - in call ui fix 3rd - lock screen fix
5. Go back and install GApps arm6.0 pico
6. then reboot.. (i will take much time. so you have to wait for it)
N.B: when you will setup your device after reboot, set pattern lock.. (MUST)
DOWNLOAD
J2 (6) - J210f
J2 PRO
What is that blue light filter
Manish sorout said:
What is that blue light filter
Click to expand...
Click to collapse
It's a filter which save your eye from bluelight. you will get many 3rd party app on playstore. but samsung j7 has this prebuild and as radical is j7 based and radical has this.
Can u make miui roms for Samsung j201f
Direction lock is not working
can't use WiFi and no internet access through Bluetooth please help..
WIFI cant turn on wifi and unable to use bluetooth internet my phone is completely offline please give solution for wifi
Downloading confused
Hello ,
I am having a Galaxy J2 Pro ( J210F ) . Which file should I download?
used for J2 pro ( 2018) J250F ?
camera
camera is not working after sometimes
Download link is invalid. How can I download the ROM?
greatcomuser said:
Download link is invalid. How can I download the ROM?
Click to expand...
Click to collapse
try viper os for j210f which has anroid 7.0.1
I waited for more than half and hour after reboot but it is still showing logo only