Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my custom ROMs and Recoverys for the ASUS Memo PAD HD 7.
You'll also find how to Unlock the bootloader (mandatory to flash any custom Recovery and Rom)
Please be sure to read (and re-read) this carefully in order to avoid unnecessary questions.
My Custom ROMs / Recoverys and also the provided Stock Rom will work on both 8 GB / 16GB WW and US Models
(The RU Model is also supported, however with limited GPS support)
Code:
[COLOR="blue"]For Instructions:Check Posts #2 and #3
Downloads on Post #4
To Flash the Asus Stock Firmware: Check Post #5 [/COLOR]
AOSP Rom
AOSP JB4.2.2:
Changelog Build 01 - 20160929
Compiled from source (except Kernel - prebuilt ... only modifications on kernel's initramfs)
Everything working (as far as i tested)
Latest GAPPS included + some Google newest Goodies
Latest Stable SuperSU v2.78 included (rom is rooted ye)
Some special goodies added on rom's source (battery % , etc), not part of AOSP
Requires: Unlock Bootloader + Custom Recovery (the usual)
Full wipes recommended , so backup , backup...
Download: https://www.androidfilehost.com/?fid=529141701856462352
I'll upload Rom later into XDA DevDB , always good to have a mirror...
Changelogs Rom 4
Asus VibeUI JB4.2.2:
Changelog v2.0 (August 02 2015)
New Build
Both Cameras working (front and rear)
Added Custom (stock) Asus camera is also working (AOSP/ASUS cameras included)
New Modified working MTK Engineer Menu ( settings> Mod)
Multi-User support (settings> Mod)
Improved Dolby Sound
Gapps included (updated and working)
Some VibeUi Lenovo apps updated (including new Launcher/ theme Manager)
Ported more Asus apps (widgets)
There's several other fixs, this build was being worked out for some time ...
Changelog v1.0 (August 31 2014)
Based on Lenovo's VibeUI, ported to our tablet and with extra features:
--> Lenovo's VibeUI, it's still AOSP Based
Dolby Surround Sound (Only tested on 16GB Model)
Multi language
Theme Manager
Advance Power Manager features
Beutifull Lenovo's apps
Other features
Also Merged The following Asus apps:
AsusCalendar
AsusStory
ASUSStudio
AsusTask
Other features:
Front Camera works (Only tested on 16GB model)
Up to date GAPPS included
Rooted
busybox
Patched hosts file
GPS config improved
Not working:
Main camera (rear) --> Depending in your hardware revision; Most users will have working rear camera
Flash Instructions / Requirements:
Unlocked Bootloader
CWM / Carliv recovery
Instalation:
- Full wipes
DEPRICATED ROMs
Changelogs Rom 1
Android 4.2.2 (JB) Based custom ROM (Stock Based):
Changelog Build v1.1 R2 (November 13 2013)
Camera buttons layout fix
Calendar sync fix
Old Builds ChangeLogs:
Changelog Build v1.1 (November 10 2013)
Added the following Android 4.4 kitkat Goodies:
Apps
Bootanimation
QuickOffice
And other necessary system files
Added both USB connection modes:USB Storage and MTP Mode(internal storage now available via MTP)
Removed CPU Governor switcher
Added Performance Control (in System Settings) with several CPU/System Mods
Added in-built Xposed framework and Gravity BOX (Several System Modifications and tweeks)
Added AsusAppLocker (Requested by several Users)
Added pictures and video tweeks
Cleaned and modified some System Interface Code
Fixed some init.d perms
Changelogs Rom 2
AOSP Android 4.2.2 (JB) ROM:
Changelog BETA v2.0 (February 08 2014)
Fixed alot of issues on the core system
Internal Storage is now readable/writable
Emulated Storage is now readable/writable
App Instalation is Fixed
Update BusyBox
Update SuperSU
Update GravityBox; Xposed Framework (Fully Working since this is AOSP)
And several other Fixs
NOT Working:
Cameras (front and rear)
Needs further work:
External Storage, will be available once you take your SDCard off, and insert again.BUT can cause random reboots.
BT, will give you FC when you turn on, but it works OK
You tell me
In addition to the ROM changelog:
External SDCard: as I said it can cause random reboots, also if you reboot the TAB it can cause bootloops,in this case just remove the SDCard and the TAB will boot just fine. Last case scenario, remove the SDCard and wipe dalvik
Benchmarks: Well its noticeable the increase in speed and less RAM usage on the AOSP Betas.
Some guys are asking me why the Antutu scores are so similar with the stock Asus/And my custom ROM?
Well you should check the ram usage/FPS between the ROMs And since the Aosp doesn't fully support the external SDCard, this will give about less 2k on Antutu scores (Storage IO / database IO)
So... If you really want to compare Antutu scores, remove your External SDCard from the stock Asus/ V1.1r2 Roms.
Changelogs Rom 3
Android 4.2.2 (JB) Based custom ROM:
Based on the new official Android 4.2.2 ROM
WW OTA (ME173X_WW_user_4.2.4.04152_20140714)
From July 14 2014
Kernel 3.4.5
Stock Flashable ROM
Replace the new OTA kernel from the older one (November 28 release), since the last one is more stable
Rooted
Flash Instructions / Requirements
Unlocked Bootloader
CWM / Carliv recovery
Instalation:
- Full wipes
GPL Compliance:
Kernel 3.4.5
(My repo containing ASUS released Kernel Source, that are FAKE... )
All the ROMs, and Recoverys are using the Stock prebuilt Kernel
My Github Repo
Credits
SuperDragonPT laugh: )
Carliv (For the awesome Carliv Touch Recovery)
Koush (For the CWM Base)
Enriki (from the forum 4pda.ru),(For the "Service Firmware/Unlocked Bootloader")
shoxxy (for letting me know the Russian's work)
iBotPeaches, brut.all (for apktool)
amarullz (for AROMA Installer)
Chainfire (for SuperSU)
rovo89 (for the AWESOME Xposed Framework), Learn More Here
C3C076 (For the AWESOME Xposed GravityBox module), Learn More Here
h0rn3t and educk (for Performance Control), Learn More Here
ViPER520 and zhuhang (for ViPER4Android Audio Effects ), Learn More Here
XDA:DevDB Information
[RECOVERY] [ROMs] ASUS Memo Pad HD 7 (me173x) [MULTILANG], ROM for the Android General
Contributors
superdragonpt
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: 1.0
Created 2013-11-10
Last Updated 2016-09-28
Unlocking Bootloader and Flashing the Custom Recovery: PART #1
Unlocking Bootloader and Flashing the Custom Recovery: PART #1
Unlocking Bootloader and Flashing the Custom Recovery: PART #1
- Special TAB Format:
Make Sure your Tablet is fully Charged
Make Sure the Drivers are installed (For Detailed Drivers instalation Instructions, please check this thread)
Copy my Custom ROM (Asus_ME173X_v x.xx.zip), to the EXTERNAL SD Card, BEFORE you start the next steps...
Now in the "Download Section" get the Stock Asus Rom-and-bootloader.zip[/URL]
Included in the .zip are :
-The USB VCOM drivers and the SP_Drivers_v1.5 (Last Ones are Opcional), the VCOM Drivers alone should be enought.
- The Flash Tool
-The Asus Stock Firmware ME173X_WW_user_4.2.4.06716_20130918 (STOCK Rom; Locked Bootloader; Stock Recovery)
Open the Flash_tool.exe.
(1) Click on Scatter_Loading and choose the "MT6589_Android_scatter_emmc" from the "signed_bin" thats inside the Firmware Folder.
(2) At Flashtool Click Window and choose Write Memory
Next, Click Write Memory, Open Raw and choose the "sro-default-lock-sign.img" file from the "signed_bin" Folder.
Memory Settings must be "EMMC"
Before Flashing: Everytime when you Click on the button to Flash , the Memopad must be TURNED OFF and DISCONNECT from the PC.
After you Click on the write memory Button Connect the Pad to your PC.
The Flash Progress should beginn, when it succesfully Finished A Green Ring will shown.
Disconnect The Pad from PC
Click: Special Format #1 Settings just like in the Picture.
Click "OK" and Start the Flash Progress shown above !
After pressing "OK" connect your Tab to PC
Disconnect The Pad from PC
Next:
Click: Special Format #2 Settings just like in the Picture.
Click "OK" and Start the Flash Progress shown above !
After pressing "OK" connect your Tab to PC
Disconnect The Pad from PC
Your MemoPad is Sucessfully Formated Now lets Flash the Preloader :
Go to the Flashtool main Screen Click "Scatter_loading"
Now this Time choose the " MT6589_Android_scatter_emmc " from the root Folder.
(See next Pictures)
When you finnaly click on "Download" the following warning will appear, just press "YES"
After pressing "YES" connect your Tab to PC
Then, When The Green Ring appears Your MemoPad is Sucessfully Formated :fingers-crossed:
Disconnect The Pad from PC
(Tut from our Russian Friends and translated by our friend shoxxy)
Now You can jump to PART #2
Unlocking Bootloader and Flashing the Custom Recovery: PART #2
Unlocking Bootloader and Flashing the Custom Recovery: PART #2
Unlocking Bootloader and Flashing the CWM Based Recovery: PART #2
Download From the "Download Section" the Unlock_Bootloader install_Recovery.zip
Turn OFF the TAB
Do NOT Connect your TAB at the PC at this Stage
On the "Flasher" folder open the "Flash_tool.exe"
Then select "scatter loading" , go to the "Unlock_Bootloader install_Recovery" folder, and select the "MT6589_Android_scatter_emmc.txt"
Then press "Download"
This Message will pop-up, press "Yes"
Now Connect the TAB to PC (USB), DONT Turn it ON, keep the TAB OFF
You will hear an sound, and the flash will start
In the end, IF all is done correctly, you will see this Picture.
Congrats you now have your TAB with an CWM Based Recovery (the Carliv Touch Recovery), and the Bootloader is Unlocked
Now all you need is, is to flash my Custom Rom :laugh:
Navigation under recovery mode / Flashing the Rom:
Turn the TAB On, with the Power and Volume UP Keys (Keep The keys Pressed)
You will see the "Select Boot Mode" Menu (Check the picture)
Using the Volume UP Key, navigate to the "Recovery Mode", then Press the Volume Down Key to Select.
NOW, you will have acess to your Costum Recovery (The Recovery is Up side Down), this is NORMAL, and this happens on some new SoC's.
To Navigate on the Recovery you can use the Volume UP/Down Keys, OR You can use the Touch Buttons
Flashing The ROM:
Wipe Data / factory Reset
Wipe Cache
Advanced > Wipe Dalvik Cache
Install zip> Choose zip from sdcard
And just follow the on-screen instructions ...
System will reboot itself, when the instalation is completed
Don't worried, the first boot takes an little bit more time !
If you didnt copied the ROM to your SD Card:
Navigate on Recovery:
Mounts and storage>mount USB storage (now you can copy/paste the ROM to the SD card)
Or if you cant connect the phone to PC (Bad drivers, etc), use adb sideload:
This Recovery Supports the Aroma File Manager
Whats this? Check here
Download the Aroma File Manager
Then just copy the aroma .*zip into the "Clockworkmod" folder on the root of your SD Card
Download Aroma File Manager
MD5:19c8e9cb2e833cad74a09ad11af40445
DOWNLOADS
ROMS:
ROM VibeUI v1.0
https://www.androidfilehost.com/?fid=95916177934535008
ROM ME173X_v1.1_R2
https://www.androidfilehost.com/?fid=95916177934535951
ROM ME173X_WW_user_4.2._20140714 (Modified Official ASUS OTA)
https://www.androidfilehost.com/?fid=95916177934535953
CUSTOM RECOVERYS:
Carliv Touch Recovery (CWM) v2.1
https://www.androidfilehost.com/?fid=95916177934535012
Carliv Touch Recovery (CWM 6.0.4.4) v2.5
https://www.androidfilehost.com/?fid=95916177934535952
OTHERS:
Unlock_Bootloader+install_Recovery
https://www.androidfilehost.com/?fid=95916177934535013
Stock+Asus+Rom-and-bootloader
https://www.androidfilehost.com/?fid=95916177934535113
Asus_stock_camera
https://www.androidfilehost.com/?fid=95916177934535114
RETURNING to The Stock ASUS Rom, and Locked Bootloader
RETURNING to The Stock ASUS Rom, and Locked Bootloader Returning your Tablet Back to Stock
Download the "Stock Asus Rom-and-bootloader.zip" available in the "Download" Section.
It includes the Asus Vcom Drivers, Flash Tools and the Stock Firmware (Rom, Locked Bootloader, etc)
This will flash The STOCK ASUS Odex ROM/ Locked Bootloader / Stock Recovery
Your Tablet will be 100% Stock (This is good in case you need to return your Tablet/ Guarantee)
INFO:
Buid: ME173X_WW_user_4.2.4.06716_20130918
Android OS: JB 4.2.2
OTA Works (The Official ASUS Update) Recap Instructions:
Tablet MUST BE TURNED OFF, and with full battery
The VCOMM Drivers MUST be installed
Flashing:
Open the Flasher Folder:
Open the *.exe file "Flash_tool.exe"
Click on "Scatter-loading"
Open the "MT6589_Android_scatter_emmc.txt" That's inside the "signed_bin" Folder
Press "Download"
-- Now connect the Tablet to PC, the flash will start.
If all works OK, you will see an green circle in the End.
--Disconnect your Tablet from the PC
Now Click again on "Scatter-loading"
Open the "MT6589_Android_scatter_emmc.txt" BUT THIS TIME select the other scatter file from
the main firmware folder
You will see that this time ONLY the preloader is selected to be flashed...
Press "Download"
-- Now connect the Tablet to PC, the flash will start.
If all works OK, you will see an green circle in the End.
CONGRATS your Tablet is in STOCK Condition now !
Thank you very much, you add the last image rom too
awesome....
thank you verymuch
Wow. Any screenshots? I'm downloading the ROM now.
Thanks!
Awesome!!! I was a litter expecting 4.3 though. But the custom recovery is too good already.
Got this error, couldn't flash the custom recovery
Fixed that error, now I get this
BROM ERROR : S_SECURITY_SEC_CFG_IMAGE_CUST_NAME_MISMATCH (6074) , MSP ERROE CODE : 0x00.
Great work man. Only one question. How to lock bootloader again?
Sent from my GN
@superdragonpt thanks a lot man, finally we can backup our systems and install other roms. Great work.
tt2
ericmaxman said:
Got this error, couldn't flash the custom recovery
Fixed that error, now I get this
BROM ERROR : S_SECURITY_SEC_CFG_IMAGE_CUST_NAME_MISMATCH (6074) , MSP ERROE CODE : 0x00.
Click to expand...
Click to collapse
EDITED:
New Instructions in the OP
Please check Posts # 2 and 3
superdragonpt said:
Strange, did you tried downloading The file again and test?
last case scenario, it was an bad upload,.
if someone else is getting the same error, please Report .
Click to expand...
Click to collapse
Tried from 2 separate notebooks, same error..
Maybe you have to follow the first steps described here:
http://forum.xda-developers.com/showthread.php?t=2339895&page=30
Here the sro-default-lock-sign.img is preloaded
The preloader is included on The .zip
The flash tool wont load if The preloader isnt present.
i will look at it, on my launch break, dont worry.
but i still need to know if enyone else is getting this error
EDITED:
New Instructions in the OP
Please check Posts # 2 and 3
Is it possible to flash without loosing all user apps and data?
Do a TB backup first.
Powered by Galaxy Note
kanefan67 said:
Is it possible to flash without loosing all user apps and data?
Click to expand...
Click to collapse
First root with farmaroot (search in xda)
Than instal titanium backup and backup all user apps.
Than do all the things n the fiat poat of this thread.
And restore with titanium backup afterwards.
Sent from my GT-I9070 using xda app-developers app
DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my custom ROM And Recovery for the Wiko DarkMoon
Please be sure to read (and re-read) this carefully in order to avoid unnecessary questions.
Instructions and Frequently asked questions (FAQ):
For Instructions jump into post #2.
FAQ jump into post #3.
Wiko DarkMoon internal memory re-partition, jump into post #4.
How to Revert to the STOCK Rom / Recovery / Partition Layout, jump into post #4.
Recovery INFO
The salient features of Carliv Touch Recovery include:
Based on CWM 6.0.4.4
Full Touch Support
With features of Cannibal Open Touch
Aroma File Manager Support
Support for both Edify and Amend scripting allows flashing all ROMs
Touch screen button controls
Advanced Backup
Advanced Restore
Delete old backups
Persistent settings
User-defined backup locations
ADB Sideload
Update CTR v2.5 (30/07/2014)
Changelogs:
New Menu Layout
Tar + Gzip Backup Compression : ( "Backup/Restore" -> "Default Backup Format" )
Your Backups will be smaller now, just like on the old native CWM
Removed "wipe all" option from wipe menu ( if you need to wipe system, use "format system" from "mounts/storage")
Rearanged menu order in root menu to restore CWM order
There's now an "nvram backup/restore" menu in "carliv" section
The nvram partition will be backed up in clockworkmod/backup folder as nvram.img. This will help if you lose IMEI and other communication features. It will work only if you have the nvram partition of size 0x500000 (check your scatter) and if you have the nvram defined as /dev/nvram path in recovery.fstab. If the nvram partition is damaged (as in flashing an oversized recovery) this will not help you, and you need SPFlashTools to reflash with format your phone official firmware, and after that flash this recovery, boot in recovery and restore nvram.
some other small changes.
Changelogs
Android 4.2.2 (JB) Based custom ROM:
Changelog Build v1.0 (February 22 2014)
Based on official Android 4.2.2 ROM (WIKO DARKMOON Version 8)
Kernel 3.4.5
Custom Mods:
User customize-able installation based on AROMA installer
Pre-rooted with SuperSU (v1.93)
Debloated
Added BusyBox (v1.22.1 - Stericson)
Added Ad blocker (patched "host" file)
Ziplagned apks (better performance)
init.d support with performance scripts
Network, wifi, power saving, and several other tweeks
Updated APN's from CyanogenMOD repo
Added Performance Control (several CPU/System Mods)
Added in-built Xposed framework and Latest Gravity BOX module v2.9.7 (Several System Mods)
Acess To the Mediatek MTK Eng Mode
Added the following Android 4.4 KitKat Goodies:
Apps (Including Google Launcher - GEL, with Voice Search )
Bootanimation
QuickOffice
And other necessary system files
Kernel:
Insecure
Removed Mediatek debugger (mtk.aee.aed Daemon; etc)
USB Mass Storage as Default (instead of MTP)
GPL Compliance:Kernel 3.4.5
Github Kernel Repo
Downloads:Dev-Host
WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip - 386.12 MB
Mod_extended_USRDATA_2.5GB.zip - 7.07 MB
MT65xx_USB_VCOM_drivers.zip - 403.65 KB
Wiko_Recovery_and_FlashTool.zip - 12.54 MB
Credits:
SuperDragonPT
Wiko
Carliv (Awesome CWM based Recovery)
iBotPeaches, brut.all (for apktool)
amarullz (for AROMA Installer)
Chainfire (for SuperSU)
rovo89 (for the AWESOME Xposed Framework), Learn More Here
C3C076 (For the AWESOME Xposed GravityBox module), Learn More Here
bgcngm(For Maintaining the Gbox JB Branch)
h0rn3t and educk (for Performance Control), Learn More Here
XDA:DevDB Information
[RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG] , ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_Wiko_DarkMoon_Custom
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-02-22
Created 2014-02-22
Last Updated 2015-02-14
How to flash custom recovery:
Make Sure your Phone is fully Charged
Make an Full Backup of your files (Photos/Contacts, etc)
Download The MT65xx_USB_VCOM_drivers.zip
Install The Mediatek VCOM Drivers (For Detailed Drivers instalation Instructions, please check this thread)
Download The Wiko Recovery and FlashTool
Extract the .zip and you'll see two folders "Recovery" and "SP_Flash_Tool"
Open "SP_Flash_Tool" > Flash_tool.exe > Scatter-Loading> And select the "MT6582_Android_scatter.txt" from the "Recovery" Folder
Turn OFF your Phone
Press "Download" (don't worry with the pop-up "Download-Warning" Message), press YES
Connect Your Phone to PC (Turned OFF) , The Flash Progress should beginn, when its succesfully Finished A Green Ring will shown.
Congrats The Recovery is installed
How to enter into recovery mode:
With the Phone completely turned off...
Press and hold VOL. UP + VOL DOWN + POWER keys and turn on the phone.
Keep holding the keys, wait until you see on Phone:
Code:
"Recovery Mode: Volume UP"
"Factory Mode: Volume Down"
Then Press on VOL. UP key, and Recovery will load.
Navigation under recovery mode:
As soon as the splash logo disappears, Carliv Touch Recovery menu will appear. Navigation is Full Touch.
You can also use VOLUME keys (navigate up with VOL. UP and navigate down with VOL. DOWN) and POWER key to apply the action.
Scroll Pages under Recovery: To Scroll page down you have to swipe right, and for scroll page up to swipe left. Also swipe left for Go Back.
Aroma File Manager:
This Recovery Supports the Aroma File Manager
Whats this? Check here
Download the Aroma File Manager
Then just copy the aroma .*zip into the "Clockworkmod" folder on the root of your SD Card
Flashing The ROM:
Copy The ROM to The External SDCard
On Recovery:
Wipe Menu> Wipe All Data - PreFlash (Select YES - Wipe All)
Wipe Dalvik Cache (Select YES - Wipe Dalvik Cache)
Install zip > Choose zip SDCard (Select the location of the ROM.zip)
And Follow The On-Screen AROMA Installer Instructions
In the End the Phone will Reboot Itself
The first Boot will take some minutes (it's normal)
F.A.Q
Q: How Can i acess The MTK Eng Mode?
A: GravityBox >Engineering Mode
Q: What Mods can i do on the Eng.Mode?
A: There are alot of things you can do, the two most common are:
Increasing volume Level:
MTK Menu> Hardware Testing> Audio> On the "headset mode" and "LoundSpeaker Mode" set max values to 145 (The max is 160, but i dont advise it, stay safe and use the 145 value)
Speed up the GPS reception :
(Before Going to the MTK Menu)
Open the app "FasterGPS", and give it root permissions
Choose your Continent, your region (at this point, your gps is properly configured with your country *.ntp values)
(Now on MTK Menu ...)
MTK Menu> Location> Location Based Service> On the "AGPS" tab, tick the "Enable A-GPS", and on the "EPO" tab, tick "Enable EPO" and "Auto Download" , this last option will download the EPO files it requires an data connection.
Start the app "GPS Status", in the first Satts Lock, you need to wait a little bit (it can take up to 15m, be sure you are in an Open Area).
When you get an good lock, on Satts, your DONE.
A: I dont see the Development Options, how can i acess it?
Q: Unlocking the Development Options:
Go to "Settings" > "About Phone"
Then tap 7 times on the "Build Number"
Q: Where are the Development Options?
A: Settings> Developer Options
Q: What is the Performance Control?
A: Its an Control Panel, where you can Change / managed the CPU Governors/ IO Shedulers / among several other things.
Q: The Launcher sometimes seems an bit laggy
A: Go to Settings> Developer Options> on "Window animation scale" set it to .5x, and on "Transition animation scale" set it to .5x
Q: I really like your work, how can i thank you?
A: You can press the "THANKS" button, and if you want, you can donate some beers to me
Wiko DarkMoon internal memory re-partition
Mod Extended Userdata v1 ( 2GB ) --> Removed / Use the v2
This Mod will extend userdata partition to 2GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Mod Extended Userdata v2 (2.5 GB)
This Mod will extend userdata partition to 2.5GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA_2.5GB.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2.5GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Reverting to the Stock ROM
This will revert back your phone to STOCK (including the stock recovery), in case you need to send your phone to the Service Center
Instructions:
Go to Wiko's website and download the latest Rom Version:
http://fr.wikomobile.com/maj.php?telephone=131
Follow the instructions given ...
Older instructions:
Download the DARKMOON_JB4.2.2._Stock Rom-wiko_rev8.zip
Use the SPFlashTool that i provided with the CWM Recovery .zip
Make sure phone is fully charged
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt
Press Download
After flashing is complete,you'll see an green circle
Profit
Thanks. Can you add some screenshots?
h3lder said:
Thanks. Can you add some screenshots?
Click to expand...
Click to collapse
Was Uploading, check under the ScreenShots TAB
Regards
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
sapoide said:
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
Click to expand...
Click to collapse
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
superdragonpt said:
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
Click to expand...
Click to collapse
Ok understood, thanks
Do this rom will work with my Xolo Q700S?
Sent from my Q700S using xda app-developers app
superdragonpt:
Where can you please downloaded the source code for kernel mt6582? Can you give me a link please?
Or: Your sources kernel what you gave to download are original (unchanged)?
Edit:
OK. I found where you can download the source. Sorry for the spam.
http://forum.xda-developers.com/showthread.php?t=2645756
http://forum.xda-developers.com/showthread.php?t=2650513
Hi
You guys are all crazy with the MTK leaked sources, but do you even have an clue what those sources are?
You cant just compile an source that's customize for other phone , thinking it will work on yours.
There's a lot of work to be done, and you need an huge amount of luck to have your phone drivers available in that source.
This said, I will appreciate that people avoid off-topic and other phones talk in this thread.
This ROM and recovery will only work on wiko darkmoon and Micromax a200 (clone).
If your using this ROM as a base for another MT6582 phone, please be an gentlemen and give proper credits.
Regards
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
superdragonpt said:
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
Click to expand...
Click to collapse
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
skydancer79 said:
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
Click to expand...
Click to collapse
The ROM is multi language.
What language where you looking for?
Regards
superdragonpt said:
The ROM is multi language.
What language where you looking for?
Regards
Click to expand...
Click to collapse
Slovenian...most android phones have it. Moto G had the same "problem"
skydancer79 said:
Slovenian...most android phones have it. Moto G had the same "problem"
Click to expand...
Click to collapse
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
superdragonpt said:
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
Click to expand...
Click to collapse
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
skydancer79 said:
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
Click to expand...
Click to collapse
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
superdragonpt said:
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
Click to expand...
Click to collapse
So is this ROM fully functional? I mean no bugs? For English language.. I could test it on my Turbo mini
################################################## ##############################################
################################################## ############################################
If you having hard time to find a custom ROM for your GIONEE P2, I have found some custom ROM for this phone.
* I’M NOT A DEVELOPER. I ONLY SHARE THE WORK OF OTHER GUYS . THEY DID AN AMAZING WORK BY PORTING ROM FROM MANY OTHER BRANDS TO GIONEE P2. ALL CREDITS SHOULD BE ADDRESSED TO THE ORIGINAL AUTHOR
* I ASSUME THAT YOU ALREADY KNOW THE RISK OF DOING THIS AND I'M NOT RESPONSIBLE FOR THE DAMAGE OF YOUR PHONE.
* If you don’t have CWM recovery please flash this CWM using Mobile Uncle.
Install a Custom Recovery and backup your ROM onto your SD Card. There are 3 Custom Recoveries available:-
CWM Recovery(non-touch): https://www.dropbox.com/s/x3sml2uhib892o7/CWM_recovery.zip
COT Recovery (touch): http://d-h.st/IXg
Carliv Touch RecoveryRECOMMENDED) http://d-h.st/COE
* If you found that ROM on this list don’t have GAPPS, please flash this ZIP trough CWM.
GAPPS for Jelly Bean: http://goo.im/gapps/gapps-jb-20130812-signed.zip
* If you can't download apps from Google Play Store, please empty the Proxy number on APN (Access Point Names) Setting.
-------------------------------------------------------------------------------------------------------------------
TO ROOT YOUR GIONEE PIONEER P2 PHONE
-------------------------------------------------------------------------------------------------------------------
1. Download and install Framaroot tool from here: http://forum.xda-developers.com/showthread.php?t=2130276
2. Open Framaroot app and you will see InstallSuperSU, and Boromir at the last. Click Boromir. Restart. DONE!
3. Additionally download and install Busybox from the Play Store, and when you open the app do a Normal(Safer) or Smart Install of Busybox. This app is required bymany other root apps to work properly.
************************************************** ************************************************** ********************
THIS GUIDE IS A COMMON METHOD OF FLASHING CUSTOM ROM USING CWM RECOVERY (detailed explanation can be found on google)
-------------------------------------------------------------------------------------------------------------------
TO INSTALL A CUSTOM ROM (Need rooted phone with custom recovery)
-------------------------------------------------------------------------------------------------------------------
1. Charge battery to Full.
2. Backup user data using Titanium backup.
3. Download the ROM you want to install and pasteit in the root of your SD Card.
4. Boot into Custom Recovery using Vol– and Powerkey.
-------------------------------------------------------------------------------------------------------------------
A) PROCEDURE USING CARLIV TOUCH RECOVERY (RECOMMENDED METHOD) ## By Sarfuddin Haider
-------------------------------------------------------------------------------------------------------------------
5. Click wipe menu
6. Click wipe all data - Preflash
7. Click Factory Reset
8. Click Wipe Cache
9. Click Wipe Dalvic Cache
10. Press Back Soft Key
11. Click Install zip from SD card
12. Click Choose Zip, to browse SD card. Then Swipe on sky blue color place, which is on your bottom right hand corner, to see all your folders and zip files on SD card. NOW SELECT ROM.ZIP.
-----Then wait for installalation to finish---
9. Click on Reboot. | DONE |
-------------------------------------------------------------------------------------------------------------------
B) PROCEDURE USING CWM RECOVERY
-------------------------------------------------------------------------------------------------------------------
5. Wipe User data/ Factory Reset
6. Wipe Cache.
7. Go to Advance options and Wipe Dalvic Cache and then wipe Battery status.
8. Now return to the main menu of custom recovery,and Select Install zip from SD card.
9. Click on Install from SD card and then select the ROM you downloaded, and then select Install.
10. Wait till the ROM finishes Flashing then Reboot your phone. The first Reboot may take a longer time, so wait for it. Then Enjoy the new ROM!
************************************************** ************************************************** ********************
List will be updated once there is a new ROM available. Enjoy it
*please let me know if you have ROM to share here*
-------------------------------------------------------------------------------------------------------------------
LIST OF CUSTOM ROMS AVAILABLE FOR GIONEE P2
-------------------------------------------------------------------------------------------------------------------
>>Gionee P2 Stock Rom without root
Author: Somnath Sharma https://www.facebook.com/ss429842
Use this to get back your stock factory Gionee P2 ROM. (This one needs to be flashed with SP Tools using a PC)
http://www.4shared.com/folder/NXYysP6f/Gionee_P2.html
or
https://drive.google.com/folderview?id=0Bz2ListsuV2-cHhqSzdqTmEtYkU&usp=sharing
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
(BACKUP YOUR IMEI>> https://drive.google.com/file/d/0B_N7PgYjjaAhaXNWN3RjbGt6WUU/view
before Formatting data etc...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
>> Zeerow OS
Porter: Somnath Sharma
Author: mediamod
process: backup IMEI
factory reset
flash ZeeRow_Final.zip
reboot..
ScreenShots: Install And Feel it........
link: https://docs.google.com/uc?id=0B_N7PgYjjaAhNUtSaGl5MTRuX0k&export=download
>> Photon v1 Lite edition(gamers)
Author: Somnath sharma
Ss:
Link: http://www.4shared.com/zip/Ao48xHthba/Photon-v11_P2_ss429842.html
>>Baidu OS 53
Author :Somnath Sharma
Link http://www.4shared.com/zip/n4IRM9Goba/Baidu_OS-53_P2.html
Screenshots :
>>Pure AOSP ROM
Authorraveen Gite
Download from: http://forum.xda-developers.com/showthread.php?p=51279094
Get more info here: https://www.facebook.com/groups/gioneep2/1505212769706124/
>>Nexus V3
by Emrul
http://www.waltonforum.com/index.php/topic,4094.0.html
>>KARBON+ MUSIC EDITION ROM
https://drive.google.com/uc?id=0B0bjvC89CId9WldCZ09PVFBVc2s&export=download
Know more: http://www.waltonforum.com/index.php/topic,4008.0.html
https://www.facebook.com/groups/1447219922172076/permalink/1488444104716324/
>>Pure Jellybean 4.2.2 Custom rom
Author Eshanjahan
http://www.waltonforum.com/index.php/topic,4088.0.html
>> Karbon+ ROM
http://www.mediafire.com/download/da9o15y9jwanbuo/hct72_wet_jb3_signed_020714_012707.zip
For more info: https://www.facebook.com/notes/gion...imo-f2-and-gionee-pioneer-p2/1485763151651086
>> VIO_DROP V1
Author: Rumu & Eshan
Download from: http://www.waltonforum.com/index.php/topic,4070.0.html
Screenshots: https://www.facebook.com/photo.php?fbid=753957804628818&set=gm.223600324496730&type=1
>> SIUI V01 Custom ROM
Author: Shovik
http://www.waltonforum.com/index.php/topic,3945.0.html
To know more: https://www.facebook.com/groups/1447219922172076/permalink/1479915022235899/
Bug Fixes Patch: http://www.mediafire.com/download/ezj9by67ibfpmc9
>> XoloMix Custom ROM
http://www.waltonforum.com/index.php/topic,3825.0.html
https://drive.google.com/file/d/0B9M8faMoEdOZWnRTajdnSXFrd0k/edit?usp=sharing
Additional:
Sensor fix patch:- http://d-h.st/EkU ( DONT WIPE ANYTHING JUST FLASH IT LIKE PERFORMANCE PATCH.)
Better performance patch>>> http://d-h.st/wT2
>> Galaxy S5 Custom ROM
Authorany Dan
http://www.waltonforum.com/index.php/topic,4169.msg8944.html
>> Galaxy Note 3 Custom Rom
See link for details: http://www.waltonforum.com/index.php/topic,4011.0.html
Screenshots: https://www.facebook.com/photo.php?fbid=738569779500954&set=gm.1489102681317133&type=1
>> Nexus v2 4.2.2
Author: Drockk Xm
http://www.waltonforum.com/index.php/topic,4038.0.html
>> MiUi JellyBelly 4.3
Author:Wasik Jahan Eshan
http://www.waltonforum.com/index.php/topic,4025.0.html
>> Xperia Touch V1 ROM
Author: MH SOHAN
https://drive.google.com/file/d/0B1z_Fqh5jyitZ1ZUOThuYXotc0k/preview
To know more: http://www.waltonforum.com/index.php/topic,3972.0.html
https://www.facebook.com/groups/1447219922172076/permalink/1484552441772157/
>> Touchwiz Rom
Authorraveen Gite
https://drive.google.com/uc?id=0B_j-SpukmH_3NmNRVkExRS1oZzg&export=download
For more info: https://www.facebook.com/groups/1447219922172076/permalink/1477993332428068/
>> Lewa OS Custom ROM
http://www.mediafire.com/download/o8hbsci5o1198fd/LeWaOs+For+F2+(Deodex)+By+Drockk_Xm.zip
>> Lewa OS Custom ROM
Authorraveen Gite
https://docs.google.com/uc?id=0B_j-SpukmH_3V202N0cySHpIMm8&export=download
To know more: https://www.facebook.com/groups/1447219922172076/permalink/1462813260612742/
>> Nexus V1
Authorrocck Xm
http://billionuploads.com/wn95qs25eue8
>> Untouched Jelly Bean ROM 4.2.2
Author: Shovik
https://www.dropbox.com/sh/871axubt9l3m4s5/TGIf-poY7x
To know more:
https://www.facebook.com/groups/1447219922172076/permalink/1457307407829994/
>> MIUI 5 ROM
http://www.mediafire.com/download/rax3ng1824m7s7l/PRIMO+F2+MiUi.zip
>> Concept Kitkat 4.4.2 Custom Rom By Emrul
http://www.waltonforum.com/index.php/topic,4078.0.html
>>Nokia X custom Rom
Author somnath sharma
Download rom from here
4shared: http://www.4shared.com/zip/mPlS2Kxfba/P2-NokiaX-ss429842.html
Gdrive : https://docs.google.com/file/d/0Bz2ListsuV2-dDJuVkU4alkxQjA/edit?pli=
reboot to recovery and flash the patch
{{{ DONT WIPE ANYTHING AFTER FLASHING}}
http://www.4shared.com/zip/dI-Wbjhice/Nokia_X_fix_.html
https://drive.google.com/file/d/0Bz2ListsuV2-dTJNanFnSE9aelE/edit?usp=sharing
MORE INFO: https://www.facebook.com/notes/gionee-p2-development-discussion/nokia-x-custom-rom/1547076652186402
>>XPERIA TOUCH V1 DUAL 3.9G
Author: https://www.facebook.com/sarfuddin.haider2
DOWNLOAD https://drive.google.com/file/d/0B1z_Fqh5jyitZ1ZUOThuYXotc0k/edit?usp=sharing
INFO https://www.facebook.com/notes/gion...422-rom-by-mh-sohan-for-f2p2/1484772908416777
>>BAIDU 2.3 OS 4.2.2
Author: MH Sohan https://www.facebook.com/sohan.hasan.5667
Download: https://drive.google.com/file/d/0B1z_Fqh5jyitN3d5Z0RITE1EMDg/edit?usp=sharing
INFO: https://www.facebook.com/notes/gion...422-rom-for-f2p2-by-mh-sohan/1513901992170535
>>XOLOMIX
Author: Hossain Evan
DOWNLOAD: https://drive.google.com/file/d/0B9M8faMoEdOZWnRTajdnSXFrd0k/edit?usp=sharing
INFO: https://www.facebook.com/notes/gion...-rom-in-primo-f2-bugless-rom/1464950960398972
>> iOS CUSTOM ROM
Author Somnath Sharma
DOWNLOAD: http://www.4shared.com/zip/tTHDjdMQba/iOS_P2_test16_ss429842.htmluse
info ;https://www.facebook.com/media/set/?set=oa.1536395773254490&type=1
many more coming soon
Very Nice work !!!! waiting for the KITKAT.... :laugh::laugh::good::good::good::good::good:
ss429842 said:
################################################## ##############################################
################################################## ############################################
If you having hard time to find a custom ROM for your GIONEE P2, I have found some custom ROM for this phone.
* I’M NOT A DEVELOPER. I ONLY SHARE THE WORK OF OTHER GUYS . THEY DID AN AMAZING WORK BY PORTING ROM FROM MANY OTHER BRANDS TO GIONEE P2. ALL CREDITS SHOULD BE ADDRESSED TO THE ORIGINAL AUTHOR
* I ASSUME THAT YOU ALREADY KNOW THE RISK OF DOING THIS AND I'M NOT RESPONSIBLE FOR THE DAMAGE OF YOUR PHONE.
* If you don’t have CWM recovery please flash this CWM using Mobile Uncle.
Install a Custom Recovery and backup your ROM onto your SD Card. There are 3 Custom Recoveries available:-
CWM Recovery(non-touch): https://www.dropbox.com/s/x3sml2uhib892o7/CWM_recovery.zip
COT Recovery (touch): http://d-h.st/IXg
Carliv Touch RecoveryRECOMMENDED) http://d-h.st/COE
* If you found that ROM on this list don’t have GAPPS, please flash this ZIP trough CWM.
GAPPS for Jelly Bean: http://goo.im/gapps/gapps-jb-20130812-signed.zip
* If you can't download apps from Google Play Store, please empty the Proxy number on APN (Access Point Names) Setting.
-------------------------------------------------------------------------------------------------------------------
TO ROOT YOUR GIONEE PIONEER P2 PHONE
-------------------------------------------------------------------------------------------------------------------
1. Download and install Framaroot tool from here: http://forum.xda-developers.com/showthread.php?t=2130276
2. Open Framaroot app and you will see InstallSuperSU, and Boromir at the last. Click Boromir. Restart. DONE!
3. Additionally download and install Busybox from the Play Store, and when you open the app do a Normal(Safer) or Smart Install of Busybox. This app is required bymany other root apps to work properly.
************************************************** ************************************************** ********************
THIS GUIDE IS A COMMON METHOD OF FLASHING CUSTOM ROM USING CWM RECOVERY (detailed explanation can be found on google)
-------------------------------------------------------------------------------------------------------------------
TO INSTALL A CUSTOM ROM (Need rooted phone with custom recovery)
-------------------------------------------------------------------------------------------------------------------
1. Charge battery to Full.
2. Backup user data using Titanium backup.
3. Download the ROM you want to install and pasteit in the root of your SD Card.
4. Boot into Custom Recovery using Vol– and Powerkey.
-------------------------------------------------------------------------------------------------------------------
A) PROCEDURE USING CARLIV TOUCH RECOVERY (RECOMMENDED METHOD) ## By Sarfuddin Haider
-------------------------------------------------------------------------------------------------------------------
5. Click wipe menu
6. Click wipe all data - Preflash
7. Click Factory Reset
8. Click Wipe Cache
9. Click Wipe Dalvic Cache
10. Press Back Soft Key
11. Click Install zip from SD card
12. Click Choose Zip, to browse SD card. Then Swipe on sky blue color place, which is on your bottom right hand corner, to see all your folders and zip files on SD card. NOW SELECT ROM.ZIP.
-----Then wait for installalation to finish---
9. Click on Reboot. | DONE |
-------------------------------------------------------------------------------------------------------------------
B) PROCEDURE USING CWM RECOVERY
-------------------------------------------------------------------------------------------------------------------
5. Wipe User data/ Factory Reset
6. Wipe Cache.
7. Go to Advance options and Wipe Dalvic Cache and then wipe Battery status.
8. Now return to the main menu of custom recovery,and Select Install zip from SD card.
9. Click on Install from SD card and then select the ROM you downloaded, and then select Install.
10. Wait till the ROM finishes Flashing then Reboot your phone. The first Reboot may take a longer time, so wait for it. Then Enjoy the new ROM!
************************************************** ************************************************** ********************
List will be updated once there is a new ROM available. Enjoy it
*please let me know if you have ROM to share here*
-------------------------------------------------------------------------------------------------------------------
LIST OF CUSTOM ROMS AVAILABLE FOR GIONEE P2
-------------------------------------------------------------------------------------------------------------------
>>Gionee P2 Stock Rom without root
Author: Somnath Sharma https://www.facebook.com/ss429842
Use this to get back your stock factory Gionee P2 ROM. (This one needs to be flashed with SP Tools using a PC)
http://www.4shared.com/folder/NXYysP6f/Gionee_P2.html
or
https://drive.google.com/folderview?id=0Bz2ListsuV2-cHhqSzdqTmEtYkU&usp=sharing
>>Baidu OS 53
Author :Somnath Sharma
Link http://www.4shared.com/zip/n4IRM9Goba/Baidu_OS-53_P2.html
Screenshots :
>>Pure AOSP ROM
Authorraveen Gite
Download from: http://forum.xda-developers.com/showthread.php?p=51279094
Get more info here: https://www.facebook.com/groups/gioneep2/1505212769706124/
>>Nexus V3
by Emrul
http://www.waltonforum.com/index.php/topic,4094.0.html
>>KARBON+ MUSIC EDITION ROM
https://drive.google.com/uc?id=0B0bjvC89CId9WldCZ09PVFBVc2s&export=download
Know more: http://www.waltonforum.com/index.php/topic,4008.0.html
https://www.facebook.com/groups/1447219922172076/permalink/1488444104716324/
>>Pure Jellybean 4.2.2 Custom rom
Author Eshanjahan
http://www.waltonforum.com/index.php/topic,4088.0.html
>> Karbon+ ROM
http://www.mediafire.com/download/da9o15y9jwanbuo/hct72_wet_jb3_signed_020714_012707.zip
For more info: https://www.facebook.com/notes/gion...imo-f2-and-gionee-pioneer-p2/1485763151651086
>> VIO_DROP V1
Author: Rumu & Eshan
Download from: http://www.waltonforum.com/index.php/topic,4070.0.html
Screenshots: https://www.facebook.com/photo.php?fbid=753957804628818&set=gm.223600324496730&type=1
>> SIUI V01 Custom ROM
Author: Shovik
http://www.waltonforum.com/index.php/topic,3945.0.html
To know more: https://www.facebook.com/groups/1447219922172076/permalink/1479915022235899/
Bug Fixes Patch: http://www.mediafire.com/download/ezj9by67ibfpmc9
>> XoloMix Custom ROM
http://www.waltonforum.com/index.php/topic,3825.0.html
https://drive.google.com/file/d/0B9M8faMoEdOZWnRTajdnSXFrd0k/edit?usp=sharing
Additional:
Sensor fix patch:- http://d-h.st/EkU ( DONT WIPE ANYTHING JUST FLASH IT LIKE PERFORMANCE PATCH.)
Better performance patch>>> http://d-h.st/wT2
>> Galaxy S5 Custom ROM
Authorany Dan
http://www.waltonforum.com/index.php/topic,4169.msg8944.html
>> Galaxy Note 3 Custom Rom
See link for details: http://www.waltonforum.com/index.php/topic,4011.0.html
Screenshots: https://www.facebook.com/photo.php?fbid=738569779500954&set=gm.1489102681317133&type=1
>> Nexus v2 4.2.2
Author: Drockk Xm
http://www.waltonforum.com/index.php/topic,4038.0.html
>> MiUi JellyBelly 4.3
Author:Wasik Jahan Eshan
http://www.waltonforum.com/index.php/topic,4025.0.html
>> Xperia Touch V1 ROM
Author: MH SOHAN
https://drive.google.com/file/d/0B1z_Fqh5jyitZ1ZUOThuYXotc0k/preview
To know more: http://www.waltonforum.com/index.php/topic,3972.0.html
https://www.facebook.com/groups/1447219922172076/permalink/1484552441772157/
>> Touchwiz Rom
Authorraveen Gite
https://drive.google.com/uc?id=0B_j-SpukmH_3NmNRVkExRS1oZzg&export=download
For more info: https://www.facebook.com/groups/1447219922172076/permalink/1477993332428068/
>> Lewa OS Custom ROM
http://www.mediafire.com/download/o8hbsci5o1198fd/LeWaOs+For+F2+(Deodex)+By+Drockk_Xm.zip
>> Lewa OS Custom ROM
Authorraveen Gite
https://docs.google.com/uc?id=0B_j-SpukmH_3V202N0cySHpIMm8&export=download
To know more: https://www.facebook.com/groups/1447219922172076/permalink/1462813260612742/
>> Nexus V1
Authorrocck Xm
http://billionuploads.com/wn95qs25eue8
>> Untouched Jelly Bean ROM 4.2.2
Author: Shovik
https://www.dropbox.com/sh/871axubt9l3m4s5/TGIf-poY7x
To know more:
https://www.facebook.com/groups/1447219922172076/permalink/1457307407829994/
>> MIUI 5 ROM
http://www.mediafire.com/download/rax3ng1824m7s7l/PRIMO+F2+MiUi.zip
>> Concept Kitkat 4.4.2 Custom Rom By Emrul
http://www.waltonforum.com/index.php/topic,4078.0.html
>>Nokia X custom Rom
Author somnath sharma
Download rom from here
4shared: http://www.4shared.com/zip/mPlS2Kxfba/P2-NokiaX-ss429842.html
Gdrive : https://docs.google.com/file/d/0Bz2ListsuV2-dDJuVkU4alkxQjA/edit?pli=
reboot to recovery and flash the patch
{{{ DONT WIPE ANYTHING AFTER FLASHING}}
http://www.4shared.com/zip/dI-Wbjhice/Nokia_X_fix_.html
https://drive.google.com/file/d/0Bz2ListsuV2-dTJNanFnSE9aelE/edit?usp=sharing
MORE INFO: https://www.facebook.com/notes/gionee-p2-development-discussion/nokia-x-custom-rom/1547076652186402
>>XPERIA TOUCH V1 DUAL 3.9G
Author: https://www.facebook.com/sarfuddin.haider2
DOWNLOAD https://drive.google.com/file/d/0B1z_Fqh5jyitZ1ZUOThuYXotc0k/edit?usp=sharing
INFO https://www.facebook.com/notes/gion...422-rom-by-mh-sohan-for-f2p2/1484772908416777
>>BAIDU 2.3 OS 4.2.2
Author: MH Sohan https://www.facebook.com/sohan.hasan.5667
Download: https://drive.google.com/file/d/0B1z_Fqh5jyitN3d5Z0RITE1EMDg/edit?usp=sharing
INFO: https://www.facebook.com/notes/gion...422-rom-for-f2p2-by-mh-sohan/1513901992170535
>>XOLOMIX
Author: Hossain Evan
DOWNLOAD: https://drive.google.com/file/d/0B9M8faMoEdOZWnRTajdnSXFrd0k/edit?usp=sharing
INFO: https://www.facebook.com/notes/gion...-rom-in-primo-f2-bugless-rom/1464950960398972
>> iOS CUSTOM ROM
Author Somnath Sharma
DOWNLOAD: http://www.4shared.com/zip/tTHDjdMQba/iOS_P2_test16_ss429842.htmluse
info ;https://www.facebook.com/media/set/?set=oa.1536395773254490&type=1
many more coming soon
Click to expand...
Click to collapse
CHECK OUT GUYZZZ
WORLD FIRST CUSTOM ROM BASED ON MT6589
PORTED AND DEVELOPED
BY ME Abhinandan Trilokia
TO WORK ON MT6572 BASED DEVICES
INTRODUCTION:
Project Pure Xperiaui is custom rom made for
MT6572 Based device .This rom is based on
SONY XPERIA C AND PUREXPERIA ROM (MT6589
BASED ROM) ported AND developed by me to
work on MT6572 based devices.This rom is stable
for daily use and BEST FOR INTERNET SURFERING
AND MUSIC LOVER . This rom have 10000% SONY
XPERIA EXPERIANCE WITH AROMA INSTALLER
FEATURES:
1. PURE SONY XPERIA UI EXPERIANCE AND DUAL
3G
2. SONY BRAVIA ENGINE 3
3. SONY XLOUD, CLEARPHRASE, CLEARBASS,
CLEAR AUDIO+ AND S-FORCE FONT SURROUND
3D
4.SONY PLAYSTATION MOBILE COMPIATIABLE
5. SONY WALKMAN (FULLY WORKING)
6.SONY ALBUM
7. SONY MOVIE
8.SONY SOCIALIFE
9.SONY SELECT
10. SONY CAR
11. SONY SMALL APP
12. XPERIA MOTIONSNAP
13. SONY STAMINA MODE FOR BATTERY
14. SONY SKETCH
15. SONY PHONE, CONTACT
16.SONY MESSAGE
17.SONY SETTING
18. SONY XPERIA THEMES
19. SONY TRACKID
20.SONY VIDEO UNLIMITED
21, SONY XPERIALINK , THROW, SMART
CONNECT ETC..
22. MANY BUILD.PROP TWEAKS FOR 3G , IMAGE
AND VIDEO, SMOOTH UI , 16 BIT SUPPORT .3D
PERFORMANCE IMPROVEMENT ETC
23. MANY INIT.D TWEAKS LIKE MALI400 BOOST ,
UNLOCK FPSE , TOUCH AND GPU RENDERING ,
SWAP ENABLED ETC.
24. AND MANY MORE SEE SCREENSHORTS ON
OFFICIAL THREAD AT XDA DEVELOPER.COM
FOR DOWNLOADING LINK AND OTHER INFO GO
HERE
https://forum.xda-developers.com/a...project-pure-xperiaui-t2904195/
post55996387
(OFFICIAL THREAD)
Witch one is the best is your experience
Abhinandan Trilokia said:
CHECK OUT GUYZZZ
WORLD FIRST CUSTOM ROM BASED ON MT6589
PORTED AND DEVELOPED
BY ME Abhinandan Trilokia
TO WORK ON MT6572 BASED DEVICES
INTRODUCTION:
Project Pure Xperiaui is custom rom made for
MT6572 Based device .This rom is based on
SONY XPERIA C AND PUREXPERIA ROM (MT6589
BASED ROM) ported AND developed by me to
work on MT6572 based devices.This rom is stable
for daily use and BEST FOR INTERNET SURFERING
AND MUSIC LOVER . This rom have 10000% SONY
XPERIA EXPERIANCE WITH AROMA INSTALLER
FEATURES:
1. PURE SONY XPERIA UI EXPERIANCE AND DUAL
3G
2. SONY BRAVIA ENGINE 3
3. SONY XLOUD, CLEARPHRASE, CLEARBASS,
CLEAR AUDIO+ AND S-FORCE FONT SURROUND
3D
4.SONY PLAYSTATION MOBILE COMPIATIABLE
5. SONY WALKMAN (FULLY WORKING)
6.SONY ALBUM
7. SONY MOVIE
8.SONY SOCIALIFE
9.SONY SELECT
10. SONY CAR
11. SONY SMALL APP
12. XPERIA MOTIONSNAP
13. SONY STAMINA MODE FOR BATTERY
14. SONY SKETCH
15. SONY PHONE, CONTACT
16.SONY MESSAGE
17.SONY SETTING
18. SONY XPERIA THEMES
19. SONY TRACKID
20.SONY VIDEO UNLIMITED
21, SONY XPERIALINK , THROW, SMART
CONNECT ETC..
22. MANY BUILD.PROP TWEAKS FOR 3G , IMAGE
AND VIDEO, SMOOTH UI , 16 BIT SUPPORT .3D
PERFORMANCE IMPROVEMENT ETC
23. MANY INIT.D TWEAKS LIKE MALI400 BOOST ,
UNLOCK FPSE , TOUCH AND GPU RENDERING ,
SWAP ENABLED ETC.
24. AND MANY MORE SEE SCREENSHORTS ON
OFFICIAL THREAD AT XDA DEVELOPER.COM
FOR DOWNLOADING LINK AND OTHER INFO GO
HERE
https://forum.xda-developers.com/a...project-pure-xperiaui-t2904195/
post55996387
(OFFICIAL THREAD)
Click to expand...
Click to collapse
Quoting the whole thread is against the rules of XDA,kindly remove it from your post.Thanks
Does there any development going on or not?
Hey friend you can also download marshmallow rom for gionee p2 it is very good rom
I'm stuck
I'm stuck on gionee logo!
I flashed the CWM Recovery and now I'm stuck
SYSTEM PARTITION NEEDED
Features of MiUi rom on MicroMaX Canvas 2+ A110Q
Here is a fully miui V5 4.11.7 ported from Star n7589 device.
- MiUi 4.2.2
- Good Battery Backup
- Playing Games Smoothly
- Buttery Smooth
- 3G SIM Switch
- Sim Toolkit
- Init.d Scripts
- Full dual sim support
- Fast, smooth, stable
- Extended power menu
- 3G active sim card switch
- Some layouts fixes
- Deleted all useless chinese apps
- MIUI camera WORKING inc front camera videorecording!
- 2G/3G toggle fixed
- EngineerMode built-in
- VIPER4ANDROID built-in
And Many More.........
UPDATE 4.11.7
Bugs :
Tell if you see any more....
How To Flash :
use CWM Recovery AND system partition needed.
For New Installation :
( You Can Take CMW Backup for Revert back to your old system )
1) Download ROM zip File below link
2) Put into External/Internal SD Card
3) Go To CMW Recovery
4) Wipe Data/Factory Reset
5) Wipe Cache
6) From Advance Menu Do Delvik Cache Clear
7) Go in Mount And Storage select FORMAT SYSTEM
8) Select Install From SD and Select file And Click YES
9) Select ROM zip And Select YES
10) Reboot
11) Congrats You have Rom now....Report if you find bugs
Note For Updaters: Users on Miui 4.10.31 ROM Please Do Not 'Wipe Data/Factory Reset' or do nothing JUST FLASH the .zip You will update to Miui 4.11.7.
(It will take around 5 Min. for first boot)
** feature updates **
1) Go to Cwm recovery
2) Select install from zip
3) select .zip and yes
4) Reboot.
Screen Shots
If flashing CUSTOM BASED ROM destruction in whatsoever in your world, neither me, nor any of my dev brothers and not even WEB OR FORUM SITE is responsible for that.
You are the one who has choosen to modify your phone and so all risk and durability is your only, no one
(credit : 4pda, xda developers. If I forgot a any developer name please suggest me I will add
& Swapnil Bunjkar )
DOWNLOADS
Mirror1
Mirror2
Super Clear & Loud Sound Patch
XDA:DevDB Information
MiUi V6 looks like 4.11.7 ROM (update) For MicroMaX Canvas 2+ A110Q, ROM for the Micromax Canvas 2 Plus A110Q
Contributors
theswapnil
Source Code: http://4pda.ru/forum/index.php?showtopic=458600&st=3620#entry34614140
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Created 2014-11-12
Last Updated 2014-11-12
hey i am using miui rom v4.3.24 how to install this rom ?
Hi guys,
I've built a new, simple rom for the Samsung Galaxy Trend Plus.
Check out the details below:
About the rom:
Custom Stock Rom (GT-S7580)
This rom is made for all S7580 devices and is based on pure stock touchwiz by Samsung.
The differences are big though.
You’re allowed to theme the rom yourself, because we have deodexed this rom.
You can also use it to unbrick your phone, without a pc or making use of the program: Odin.
Other than that, you can feel its smoothness and see that it is lite, because
lots of useless apps and files are removed from the system.
Download:
Click here to download!
Main Features:
*Malware removed
*Removed useless system apps
*Optimized RAM usage
*Deodexed
*Zipaligned
*Added ability to flash the rom without wiping data/cache partitions
*Added some small performance tweaks
We have kept the rom tweaks minimalistic, because this rom was created with the goal to make it as lite and smooth as possible.
Changelog:
What is new in version 1.4?
*Fixed dialer and contacts bug
*Fixed Systemui FC's
*Zipaligned and recompiled seccontacts.apk and secsettings.apk succesfully
*Fixed Setup Wizard FC's
*Decreased /system partition size
These bugfixes made the rom stable!
Please do NOT use or republish my work to some other site, without asking for permission! Non of the files may be used in an inappropriate way! When you have our permission, don’t forget to add credits to the post!
Click to expand...
Click to collapse
I’m NOT going to be held responsible for any damage YOU cause on your device! If your device somehow got bricked or any other problem occured, I won’t give support in such case at all! Don’t try this if you don’t know how to flash a custom recovery and rom!
Click to expand...
Click to collapse
Installation Instructions:
All roms we make are different, but the installation procedure is the same:
(Requirements)
*Make sure you’re rooted!
*Make sure you have Sandpox’s CWM or TWRP recovery installed!
(Other recoveries are not recommended!)
(Steps)
1. Download a rom and put it in the root directory of the sd card or main storage.
2. Power off your device.
3. Boot your device into recovery mode by pressing (power button), (menu button) and (volume up button) at the same time.
When the Samsung logo shows up, you can release the buttons.
4. When you’re device is booted in to recovery mode, move the volume buttons to select.
5. Format /system, /data and /cache! This must be done, otherwise the rom won’t load everything correctly!
5. Select ‘update from sd card’ or ‘update from internal storage’.
It depends on where your rom file is located.
6. Select the rom and press the power button.
7. Select yes.
8. The rom will be flashed, this can take a while.
9. Reboot the device and you’re good to go!
Make sure you wipe system, data and cache, before or afterwards.
This will make the installation clean and can prevent eventual bugs.
If you have problems with flashing, comment below.
This is not our only project, we're working on more roms.
Check them out on our website here!
You'll find all roms with their details. You can also check out the rom logs and updates sections to read all news regarding the progress of the development.
Have a nice day
Marvin
XDA:DevDB Information
Custock Lite v1.4 (GT-S7580), ROM for all devices (see above for details)
Contributors
mrmarvin_16, Marvin (me), Kostas, Andrea and Petr (Team 4DMP)
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: v1.4
Stable Release Date: 2015-05-06
Created 2015-05-24
Last Updated 2015-05-24
Which Roms on Download Page ?
4DMP XtremePLUS 5: Download Cyanogenmod 11 by Sandpox (stable): Download
4DMP XtremePLUS 6: Download Cyanogenmod 12.1 by Sandpox (stable): Download
4DMP CustockTP Rom: Download -
MIUI 6 [WIP] ?
mrmarvin_16 said:
Hi guys,
I've built a new, simple rom for the Samsung Galaxy Trend Plus.
Check out the details below:
About the rom:
Custom Stock Rom (GT-S7580)
This rom is made for all S7580 devices and is based on pure stock touchwiz by Samsung.
The differences are big though.
You’re allowed to theme the rom yourself, because we have deodexed this rom.
You can also use it to unbrick your phone, without a pc or making use of the program: Odin.
Other than that, you can feel its smoothness and see that it is lite, because
lots of useless apps and files are removed from the system.
Download:
Click here to download!
Main Features:
*Malware removed
*Removed useless system apps
*Optimized RAM usage
*Deodexed
*Zipaligned
*Added ability to flash the rom without wiping data/cache partitions
*Added some small performance tweaks
We have kept the rom tweaks minimalistic, because this rom was created with the goal to make it as lite and smooth as possible.
Changelog:
What is new in version 1.4?
*Fixed dialer and contacts bug
*Fixed Systemui FC's
*Zipaligned and recompiled seccontacts.apk and secsettings.apk succesfully
*Fixed Setup Wizard FC's
*Decreased /system partition size
These bugfixes made the rom stable!
Installation Instructions:
All roms we make are different, but the installation procedure is the same:
(Requirements)
*Make sure you’re rooted!
*Make sure you have Sandpox’s CWM or TWRP recovery installed!
(Other recoveries are not recommended!)
(Steps)
1. Download a rom and put it in the root directory of the sd card or main storage.
2. Power off your device.
3. Boot your device into recovery mode by pressing (power button), (menu button) and (volume up button) at the same time.
When the Samsung logo shows up, you can release the buttons.
4. When you’re device is booted in to recovery mode, move the volume buttons to select.
5. Format /system, /data and /cache! This must be done, otherwise the rom won’t load everything correctly!
5. Select ‘update from sd card’ or ‘update from internal storage’.
It depends on where your rom file is located.
6. Select the rom and press the power button.
7. Select yes.
8. The rom will be flashed, this can take a while.
9. Reboot the device and you’re good to go!
Make sure you wipe system, data and cache, before or afterwards.
This will make the installation clean and can prevent eventual bugs.
If you have problems with flashing, comment below.
This is not our only project, we're working on more roms.
Check them out on our website here!
You'll find all roms with their details. You can also check out the rom logs and updates sections to read all news regarding the progress of the development.
Have a nice day
Marvin
XDA:DevDB Information
Custock Lite v1.4 (GT-S7580), ROM for all devices (see above for details)
Contributors
mrmarvin_16, Marvin (me), Kostas, Andrea and Petr (Team 4DMP)
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: v1.4
Stable Release Date: 2015-05-06
Created 2015-05-24
Last Updated 2015-05-24
Click to expand...
Click to collapse
Perfect ROM, I like it more than TurboTrend rom and CM11
Thanks a lot!!!
Help
i followed the instructions and the instaation failed?!
I can not use the busybox commands in Terminal when flashing this ROM, this is a serious error hoping you will fix it!