DISCLAIMER:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* DO NOT LEECH MY DOWNLOADS, PLEASE RE-DIRECT YOUR FORUM /PAGE
* TO THIS THREAD, IF YOU LIKE MY WORK, YOU CAN SAY THANKS,
* AND MAYBE BUY ME SOME BEERS
*/
Hello Guys !
In this thread you will find my custom ROM And Recovery for the Wiko DarkMoon
Please be sure to read (and re-read) this carefully in order to avoid unnecessary questions.
Instructions and Frequently asked questions (FAQ):
For Instructions jump into post #2.
FAQ jump into post #3.
Wiko DarkMoon internal memory re-partition, jump into post #4.
How to Revert to the STOCK Rom / Recovery / Partition Layout, jump into post #4.
Recovery INFO
The salient features of Carliv Touch Recovery include:
Based on CWM 6.0.4.4
Full Touch Support
With features of Cannibal Open Touch
Aroma File Manager Support
Support for both Edify and Amend scripting allows flashing all ROMs
Touch screen button controls
Advanced Backup
Advanced Restore
Delete old backups
Persistent settings
User-defined backup locations
ADB Sideload
Update CTR v2.5 (30/07/2014)
Changelogs:
New Menu Layout
Tar + Gzip Backup Compression : ( "Backup/Restore" -> "Default Backup Format" )
Your Backups will be smaller now, just like on the old native CWM
Removed "wipe all" option from wipe menu ( if you need to wipe system, use "format system" from "mounts/storage")
Rearanged menu order in root menu to restore CWM order
There's now an "nvram backup/restore" menu in "carliv" section
The nvram partition will be backed up in clockworkmod/backup folder as nvram.img. This will help if you lose IMEI and other communication features. It will work only if you have the nvram partition of size 0x500000 (check your scatter) and if you have the nvram defined as /dev/nvram path in recovery.fstab. If the nvram partition is damaged (as in flashing an oversized recovery) this will not help you, and you need SPFlashTools to reflash with format your phone official firmware, and after that flash this recovery, boot in recovery and restore nvram.
some other small changes.
Changelogs
Android 4.2.2 (JB) Based custom ROM:
Changelog Build v1.0 (February 22 2014)
Based on official Android 4.2.2 ROM (WIKO DARKMOON Version 8)
Kernel 3.4.5
Custom Mods:
User customize-able installation based on AROMA installer
Pre-rooted with SuperSU (v1.93)
Debloated
Added BusyBox (v1.22.1 - Stericson)
Added Ad blocker (patched "host" file)
Ziplagned apks (better performance)
init.d support with performance scripts
Network, wifi, power saving, and several other tweeks
Updated APN's from CyanogenMOD repo
Added Performance Control (several CPU/System Mods)
Added in-built Xposed framework and Latest Gravity BOX module v2.9.7 (Several System Mods)
Acess To the Mediatek MTK Eng Mode
Added the following Android 4.4 KitKat Goodies:
Apps (Including Google Launcher - GEL, with Voice Search )
Bootanimation
QuickOffice
And other necessary system files
Kernel:
Insecure
Removed Mediatek debugger (mtk.aee.aed Daemon; etc)
USB Mass Storage as Default (instead of MTP)
GPL Compliance:Kernel 3.4.5
Github Kernel Repo
Downloads:Dev-Host
WIKO_DarkMoon_JB_4.2.2_Stable_v1.0.zip - 386.12 MB
Mod_extended_USRDATA_2.5GB.zip - 7.07 MB
MT65xx_USB_VCOM_drivers.zip - 403.65 KB
Wiko_Recovery_and_FlashTool.zip - 12.54 MB
Credits:
SuperDragonPT
Wiko
Carliv (Awesome CWM based Recovery)
iBotPeaches, brut.all (for apktool)
amarullz (for AROMA Installer)
Chainfire (for SuperSU)
rovo89 (for the AWESOME Xposed Framework), Learn More Here
C3C076 (For the AWESOME Xposed GravityBox module), Learn More Here
bgcngm(For Maintaining the Gbox JB Branch)
h0rn3t and educk (for Performance Control), Learn More Here
XDA:DevDB Information
[RECOVERY] [ROM] Wiko DarkMoon (MT6582) [MULTILANG] , ROM for the Android General
Contributors
superdragonpt
Source Code: https://github.com/dragonpt/Kernel_Wiko_DarkMoon_Custom
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-02-22
Created 2014-02-22
Last Updated 2015-02-14
How to flash custom recovery:
Make Sure your Phone is fully Charged
Make an Full Backup of your files (Photos/Contacts, etc)
Download The MT65xx_USB_VCOM_drivers.zip
Install The Mediatek VCOM Drivers (For Detailed Drivers instalation Instructions, please check this thread)
Download The Wiko Recovery and FlashTool
Extract the .zip and you'll see two folders "Recovery" and "SP_Flash_Tool"
Open "SP_Flash_Tool" > Flash_tool.exe > Scatter-Loading> And select the "MT6582_Android_scatter.txt" from the "Recovery" Folder
Turn OFF your Phone
Press "Download" (don't worry with the pop-up "Download-Warning" Message), press YES
Connect Your Phone to PC (Turned OFF) , The Flash Progress should beginn, when its succesfully Finished A Green Ring will shown.
Congrats The Recovery is installed
How to enter into recovery mode:
With the Phone completely turned off...
Press and hold VOL. UP + VOL DOWN + POWER keys and turn on the phone.
Keep holding the keys, wait until you see on Phone:
Code:
"Recovery Mode: Volume UP"
"Factory Mode: Volume Down"
Then Press on VOL. UP key, and Recovery will load.
Navigation under recovery mode:
As soon as the splash logo disappears, Carliv Touch Recovery menu will appear. Navigation is Full Touch.
You can also use VOLUME keys (navigate up with VOL. UP and navigate down with VOL. DOWN) and POWER key to apply the action.
Scroll Pages under Recovery: To Scroll page down you have to swipe right, and for scroll page up to swipe left. Also swipe left for Go Back.
Aroma File Manager:
This Recovery Supports the Aroma File Manager
Whats this? Check here
Download the Aroma File Manager
Then just copy the aroma .*zip into the "Clockworkmod" folder on the root of your SD Card
Flashing The ROM:
Copy The ROM to The External SDCard
On Recovery:
Wipe Menu> Wipe All Data - PreFlash (Select YES - Wipe All)
Wipe Dalvik Cache (Select YES - Wipe Dalvik Cache)
Install zip > Choose zip SDCard (Select the location of the ROM.zip)
And Follow The On-Screen AROMA Installer Instructions
In the End the Phone will Reboot Itself
The first Boot will take some minutes (it's normal)
F.A.Q
Q: How Can i acess The MTK Eng Mode?
A: GravityBox >Engineering Mode
Q: What Mods can i do on the Eng.Mode?
A: There are alot of things you can do, the two most common are:
Increasing volume Level:
MTK Menu> Hardware Testing> Audio> On the "headset mode" and "LoundSpeaker Mode" set max values to 145 (The max is 160, but i dont advise it, stay safe and use the 145 value)
Speed up the GPS reception :
(Before Going to the MTK Menu)
Open the app "FasterGPS", and give it root permissions
Choose your Continent, your region (at this point, your gps is properly configured with your country *.ntp values)
(Now on MTK Menu ...)
MTK Menu> Location> Location Based Service> On the "AGPS" tab, tick the "Enable A-GPS", and on the "EPO" tab, tick "Enable EPO" and "Auto Download" , this last option will download the EPO files it requires an data connection.
Start the app "GPS Status", in the first Satts Lock, you need to wait a little bit (it can take up to 15m, be sure you are in an Open Area).
When you get an good lock, on Satts, your DONE.
A: I dont see the Development Options, how can i acess it?
Q: Unlocking the Development Options:
Go to "Settings" > "About Phone"
Then tap 7 times on the "Build Number"
Q: Where are the Development Options?
A: Settings> Developer Options
Q: What is the Performance Control?
A: Its an Control Panel, where you can Change / managed the CPU Governors/ IO Shedulers / among several other things.
Q: The Launcher sometimes seems an bit laggy
A: Go to Settings> Developer Options> on "Window animation scale" set it to .5x, and on "Transition animation scale" set it to .5x
Q: I really like your work, how can i thank you?
A: You can press the "THANKS" button, and if you want, you can donate some beers to me
Wiko DarkMoon internal memory re-partition
Mod Extended Userdata v1 ( 2GB ) --> Removed / Use the v2
This Mod will extend userdata partition to 2GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Mod Extended Userdata v2 (2.5 GB)
This Mod will extend userdata partition to 2.5GB (stock size is 1GB) and the rest of the space will remain for the internal sdcard
NOTE: Make an FULL backup of your Rom under Recovery, and don't forget to also backup your Internal SDCard since it will be full erased
Instructions:
Download the Mod extended USRDATA_2.5GB.zip
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt from the Internal_2.5GB_Mod Dir
Press Download
After flashing is complete, boot into recovery mode and format /data (under Mounts and Storage Menu)
Optionally, if you want to restore previously saved userdata, go to backup / restore > and restore data (advanced restore feature)
Profit
Reverting to the Stock ROM
This will revert back your phone to STOCK (including the stock recovery), in case you need to send your phone to the Service Center
Instructions:
Go to Wiko's website and download the latest Rom Version:
http://fr.wikomobile.com/maj.php?telephone=131
Follow the instructions given ...
Older instructions:
Download the DARKMOON_JB4.2.2._Stock Rom-wiko_rev8.zip
Use the SPFlashTool that i provided with the CWM Recovery .zip
Make sure phone is fully charged
Shutdown your phone
Extract the .zip
Open SP_Flash_Tool dir > Flash_tool.exe
In scatter-loading load the MT6582_Android_scatter.txt
Press Download
After flashing is complete,you'll see an green circle
Profit
Thanks. Can you add some screenshots?
h3lder said:
Thanks. Can you add some screenshots?
Click to expand...
Click to collapse
Was Uploading, check under the ScreenShots TAB
Regards
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
sapoide said:
I doubt:
on step "How to flash custom recovery" - before you can do this you need to have already rooted the device?
can you please add how to root the device? it will be nice to complete better all the info.. but is already great!
congrats and thanks you! as soon as i by my wiko darkmoon i will definitely try it!
Click to expand...
Click to collapse
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
superdragonpt said:
Hi
You can root with framaroot, but i dont think thats necessary.
Just flash The recovery, then The ROM.
Regards
Click to expand...
Click to collapse
Ok understood, thanks
Do this rom will work with my Xolo Q700S?
Sent from my Q700S using xda app-developers app
superdragonpt:
Where can you please downloaded the source code for kernel mt6582? Can you give me a link please?
Or: Your sources kernel what you gave to download are original (unchanged)?
Edit:
OK. I found where you can download the source. Sorry for the spam.
http://forum.xda-developers.com/showthread.php?t=2645756
http://forum.xda-developers.com/showthread.php?t=2650513
Hi
You guys are all crazy with the MTK leaked sources, but do you even have an clue what those sources are?
You cant just compile an source that's customize for other phone , thinking it will work on yours.
There's a lot of work to be done, and you need an huge amount of luck to have your phone drivers available in that source.
This said, I will appreciate that people avoid off-topic and other phones talk in this thread.
This ROM and recovery will only work on wiko darkmoon and Micromax a200 (clone).
If your using this ROM as a base for another MT6582 phone, please be an gentlemen and give proper credits.
Regards
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
superdragonpt said:
Added Internal USRDATA Mod to the OP
Check post #4
Enjoy
Click to expand...
Click to collapse
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
skydancer79 said:
Great work, thanks.
Do you know by any chance if there is any option to add languages to this rom? Wiko doesn't include many languages. I can use locale2 from google play, but that only translates some of the functions.
Click to expand...
Click to collapse
The ROM is multi language.
What language where you looking for?
Regards
superdragonpt said:
The ROM is multi language.
What language where you looking for?
Regards
Click to expand...
Click to collapse
Slovenian...most android phones have it. Moto G had the same "problem"
skydancer79 said:
Slovenian...most android phones have it. Moto G had the same "problem"
Click to expand...
Click to collapse
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
superdragonpt said:
Hi
Yes i know, when i made a MIUI rom for my old ZTE v970, i had an hard time trying to find the proper strings for your language.
Even on stock roms from big brands, its very rare to find support for that language.
Im trying to merge and revise some strings from various sources, maybe in an future version.
Regards
Click to expand...
Click to collapse
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
skydancer79 said:
Great, that would be awsome.
As for rarity of my language, I find it quite well supported. Google Nexus has it, all Samsungs have it, so does HTC, Sony... I know Prestigio and Gsmart have it. CM also. It's not a big deal, but nevertheless - I wouldn't mind having it
Great ROM btw, very customizable.
Click to expand...
Click to collapse
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
superdragonpt said:
Hi
Well good news and bad news
The good:
I managed to Build an UNOFFICIAL Lewa Rom for our device, currently fixing the lastest issues and adding multi-language support.
So since im currently working on this language strings, might as well use that work for this rom also.
Preview pics:
http://i.imgur.com/VAGpQI3.png
Http://imgur.com/1IADxZx
Http://imgur.com/1C56EO6
The bad:
From what i gather until now, only about 100 slovenian strings are compatible (this is less than 5% of overall translation files), will keep looking
Regards
Click to expand...
Click to collapse
So is this ROM fully functional? I mean no bugs? For English language.. I could test it on my Turbo mini
This Is the first Rom for Walton Primo C2, Prime 350D, or lava 352e.
Intro:
This is a Stock based custom Rom. made from Walton primo C2 firmware. This is a bare-bone type rom. Meaning it has no GAPPs only the absolutely necessary applications, so anything you want to do, you have to install the app yourself. like for video playing install a video player :silly:
Features:
Code:
New animation added
Bravia Engine Added
xloud and as!d engine added
Improved audio and music quility
Fully optimized and tweaked
Root access
Unsecured boot.img
Newest BusyBox
RAM optimizations
Improved virtual memory management
Speed optimizations
Enabled GPU UI rendering
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All /system applications updated to latest available
All /data applications updated to latest available
Improved CPU governors performance
Most optimal system scheduler
Disabled kernel debugging for better performance
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
init.d scripts (BusyBox run-parts) support
Auto init.d permissions set on boot
Excellent battery life!
Most up-to-date system files permissions
[*]...and many more!!!!!!!!!!!!
Installation Instructions:
............................................................................................
1st : install the Driver.
2nd : Open the Flash tool (flash_tool.exe)
3rd : click Scatter loading. and select the scatter file in Crow rom folder.
4th : click "download",
remove the battery,
then put it back and plug the phone (turned off)
5th : Wait for Download to finish. after download finishes, remove the battery again.
put it back, and press vol+ and power button at same time.
6th : when you see CWM menu, go to wipe menu--> select wipe data fectory reset.
7th : reboot the phone.
8th : Enjoy.
{{{{{..........................................................................................................
For prime 350D users only
1. you have to select the scatter file on " For prime 350D users use this scatter file " folder.
2. then set the android path to crow roms "system.img"
3. then press download.
rest is the same.}}}}}}
if you get the problem "no network", try turn on and off airplane Mode. that fixes the problem 90% of the time.
Follow the instruction very carefully. i am no way responsible if you brick your device.
i made the instructions noob friendly.
try to follow it.
............................. Enjoy
.............. By : Ali Reza
Also instructions are added on the 7zip file.
I am No Way Responsible if you brick your Device
Click to expand...
Click to collapse
If you share my work at least have the decency to give credit. Do not copy and release it on your name.
Click to expand...
Click to collapse
Click Download For Download :laugh:
Password for Flash tool is "qwas"
Download
For prime 350D users download this files too. and follow the instruction inside
350D Download
XDA:DevDB Information
Crow Rom, ROM for all devices (see above for details)
Contributors
Ali Reza
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Created 2014-05-10
Last Updated 2014-05-12
Reserved
You can follow this tutorial for flashing this rom.
https://www.youtube.com/watch?v=ztI8sc8MUNo
350D users
here is a example how it should look
Ali Reza said:
This Is the first Rom for Walton Primo C2, Prime 350D, or lava 352e.
Intro:
This is a Stock based custom Rom. made from Walton primo C2 firmware. This is a bare-bone type rom. Meaning it has no GAPPs only the absolutely necessary applications, so anything you want to do, you have to install the app yourself. like for video playing install a video player :silly:
Features:
Code:
New animation added
Bravia Engine Added
xloud and as!d engine added
Improved audio and music quility
Fully optimized and tweaked
Root access
Unsecured boot.img
Newest BusyBox
RAM optimizations
Improved virtual memory management
Speed optimizations
Enabled GPU UI rendering
Data, cache and system partitions mounting tweaks
Bloatware applications removed
All /system applications updated to latest available
All /data applications updated to latest available
Improved CPU governors performance
Most optimal system scheduler
Disabled kernel debugging for better performance
Zipaligned (Improved RAM management)
Zipalign on boot (for user applications on data partition)
init.d scripts (BusyBox run-parts) support
Auto init.d permissions set on boot
Excellent battery life!
Most up-to-date system files permissions
[*]...and many more!!!!!!!!!!!!
Installation Instructions:
............................................................................................
1st : install the Driver.
2nd : Open the Flash tool (flash_tool.exe)
3rd : click Scatter loading. and select the scatter file in Crow rom folder.
4th : click "download",
remove the battery,
then put it back and plug the phone (turned off)
5th : Wait for Download to finish. after download finishes, remove the battery again.
put it back, and press vol+ and power button at same time.
6th : when you see CWM menu, go to wipe menu--> select wipe data fectory reset.
7th : reboot the phone.
8th : Enjoy.
{{{{{..........................................................................................................
For prime 350D users only
1. you have to select the scatter file on " For prime 350D users use this scatter file " folder.
2. then set the android path to crow roms "system.img"
3. then press download.
rest is the same.}}}}}}
if you get the problem "no network", try turn on and off airplane Mode. that fixes the problem 90% of the time.
Follow the instruction very carefully. i am no way responsible if you brick your device.
i made the instructions noob friendly.
try to follow it.
............................. Enjoy
.............. By : Ali Reza
Also instructions are added on the 7zip file.
Click Download For Download :laugh:
Password for Flash tool is "qwas"
Download
For prime 350D users download this files too. and follow the instruction inside
350D Download
XDA:DevDB Information
Crow Rom, ROM for all devices (see above for details)
Contributors
Ali Reza
ROM OS Version: 4.2.x Jelly Bean
ROM Kernel: Linux 3.4.x
Based On: Stock
Version Information
Status: Stable
Created 2014-05-10
Last Updated 2014-05-12
Click to expand...
Click to collapse
Hats off to u!!!
Let me ask u some important Question:
How can i customize stock rom
and make it againg flashable so that
flashtool can flash it like stock rom.
Thanks in advance!!! :good::good::good:
I am a Primo C2 user.
Sound good but after installation I have stuck on boot screen
Welcome to Plasma ROM!
The most frequently updated ROM for this phone!
Note: It is HIGHLY recommended to, after installing this ROM (or any ROM) to use a Battery Calibration app! This almost doubled my battery life, and will likely do the same for you!
Features:
- Based off the newest OC4 firmware for Verizon Wireless
- Debloated
- One of the few ROMs with working SHealth!
- Easy install
- Cool boot animation
- Dark themed using @AL_IRAQI's layers themes
- Android 5.0 Lollipop
- Working SBrowser - much faster than Chrome (and uses less battery power)
- Download booster working out of the box
- Updates every weekend!
- Battery life seems to be amazing
- UPSM works flawlessly
Install instructions:
Prerequisites:
Must have SafeStrap installed
Must have a windows computer on hand with Odin
Must have an external SD card (SafeStrap also requires this)
Must have about 20-30 minutes
1) Download the ROM.
2) Boot into SafeStrap, click "Wipe," click "Advanced Wipe," then select all the boxes except for your external SD card!!!!
3) Click "Install" and select the ROM. Install it. Do not flash the UPDATE-SuperSU.zip! The ROM already has root!
4) Once the ROM is installed, reboot into Download mode.
5) Use Odin to flash the OC4 firmware only tar (link in the Downloads section)
6) Reboot and enjoy!
Please note that the first boot will take anywhere from 5-20 minutes, so be patient!
Known bugs:
- Settings app is slightly laggy. It's still perfectly usable though. I need to zipalign that APK in the next update.
Credits:
- Thanks to jrkruse, I used his OC4 ROM as a base. I also used his themes Settings and Messages apps.
- Thanks to AL_IRAQI, I used his layers themes. (This is the themed notification dropdown and keyboard.)
- Thanks to elliwigy, for answering many questions and for a list of debloatable things.
- Thanks to geohot for root, ChainFire for SuperSU (and FlashFire), and Hashcode for SafeStrap. Without these 3 people, none of these ROMs would be possible.
I would also like to give a HUGE shoutout to Verizon, for locking the bootloaders and doing everything in their power to prevent any of this good stuff from happening.
Downloads:
Plasma ROM v1.0
OC4 Firmware only tar
Questions? Comments? Concerns? Use either the Q&A section of this fourm, or post it in the discussion. You could also PM me if you need to ask me anything that only I can answer. Some required details in problem reports:
The exact steps you took to install the ROM
How many times you reproduced the problem
How I can reproduce the problem
What you want me to do about the problem
Enjoy, and I could use some feedback/suggestions!
XDA:DevDB Information
[ROM] [5.0] Plasma ROM, ROM for the Verizon Samsung Galaxy S 5
Contributors
Nandr0idC0nsumer, Nandr0idC0nsumer, jrkruse, Thanks to elliwigy for a list of apps that are safe to debloat, I used jrkruse's OC4 ROM as a base, and AL_IRAQI, who made the layers themes
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Must be on OC4 Firmware - install guide shows how to do this
Based On: TouchWiz based
Version Information
Status: Beta
Created 2015-05-10
Last Updated 2015-05-10
Nandr0idC0nsumer said:
Welcome to Plasma ROM!
The most frequently updated ROM for this phone!
Note: It is HIGHLY recommended to, after installing this ROM (or any ROM) to use a Battery Calibration app! This almost doubled my battery life, and will likely do the same for you!
Features:
- Based off the newest OC4 firmware for Verizon Wireless
- Debloated
- One of the few ROMs with working SHealth!
- Easy install
- Cool boot animation
- Dark themed using @AL_IRAQI's layers themes
- Android 5.0 Lollipop
- Working SBrowser - much faster than Chrome (and uses less battery power)
- Download booster working out of the box
- Updates every weekend!
- Battery life seems to be amazing
- UPSM works flawlessly
Install instructions:
Prerequisites:
Must have SafeStrap installed
Must have a windows computer on hand with Odin
Must have an external SD card (SafeStrap also requires this)
Must have about 20-30 minutes
1) Download the ROM.
2) Boot into SafeStrap, click "Wipe," click "Advanced Wipe," then select all the boxes except for your external SD card!!!!
3) Click "Install" and select the ROM. Install it. Do not flash the UPDATE-SuperSU.zip! The ROM already has root!
4) Once the ROM is installed, reboot into Download mode.
5) Use Odin to flash the OC4 firmware only tar (link in the Downloads section)
6) Reboot and enjoy!
Please note that the first boot will take anywhere from 5-20 minutes, so be patient!
Known bugs:
- Settings app is slightly laggy. It's still perfectly usable though. I need to zipalign that APK in the next update.
Credits:
- Thanks to jrkruse, I used his OC4 ROM as a base. I also used his themes Settings and Messages apps.
- Thanks to AL_IRAQI, I used his layers themes. (This is the themed notification dropdown and keyboard.)
- Thanks to elliwigy, for answering many questions and for a list of debloatable things.
- Thanks to geohot for root, ChainFire for SuperSU (and FlashFire), and Hashcode for SafeStrap. Without these 3 people, none of these ROMs would be possible.
I would also like to give a HUGE shoutout to Verizon, for locking the bootloaders and doing everything in their power to prevent any of this good stuff from happening.
Downloads:
Plasma ROM v1.0
OC4 Firmware only tar
Questions? Comments? Concerns? Use either the Q&A section of this fourm, or post it in the discussion. You could also PM me if you need to ask me anything that only I can answer. Some required details in problem reports:
The exact steps you took to install the ROM
How many times you reproduced the problem
How I can reproduce the problem
What you want me to do about the problem
Enjoy, and I could use some feedback/suggestions!
XDA:DevDB Information
[ROM] [5.0] Plasma ROM, ROM for the Verizon Samsung Galaxy S 5
Contributors
Nandr0idC0nsumer, Nandr0idC0nsumer, jrkruse, Thanks to elliwigy for a list of apps that are safe to debloat, I used jrkruse's OC4 ROM as a base, and AL_IRAQI, who made the layers themes
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Must be on OC4 Firmware - install guide shows how to do this
Based On: TouchWiz based
Version Information
Status: Beta
Created 2015-05-10
Last Updated 2015-05-10
Click to expand...
Click to collapse
Whatever moderator moved this ROM to the fourms... did not realize they created FOUR DUPLICATES!
Welcome to Plasma ROM!
The most frequently updated ROM for this phone!
Note: It is HIGHLY recommended to, after installing this ROM (or any ROM) to use a Battery Calibration app! This almost doubled my battery life, and will likely do the same for you!
Features:
- Based off the newest OC4 firmware for Verizon Wireless
- Debloated
- One of the few ROMs with working SHealth!
- Easy install
- Cool boot animation
- Dark themed using @AL_IRAQI's layers themes
- Android 5.0 Lollipop
- Working SBrowser - much faster than Chrome (and uses less battery power)
- Download booster working out of the box
- Updates every weekend!
- Battery life seems to be amazing
- UPSM works flawlessly
Install instructions:
Prerequisites:
Must have SafeStrap installed
Must have a windows computer on hand with Odin
Must have an external SD card (SafeStrap also requires this)
Must have about 20-30 minutes
1) Download the ROM.
2) Boot into SafeStrap, click "Wipe," click "Advanced Wipe," then select all the boxes except for your external SD card!!!!
3) Click "Install" and select the ROM. Install it. Do not flash the UPDATE-SuperSU.zip! The ROM already has root!
4) Once the ROM is installed, reboot into Download mode.
5) Use Odin to flash the OC4 firmware only tar (link in the Downloads section)
6) Reboot and enjoy!
Please note that the first boot will take anywhere from 5-20 minutes, so be patient!
Known bugs:
- Settings app is slightly laggy. It's still perfectly usable though. I need to zipalign that APK in the next update.
Credits:
- Thanks to jrkruse, I used his OC4 ROM as a base. I also used his themes Settings and Messages apps.
- Thanks to AL_IRAQI, I used his layers themes. (This is the themed notification dropdown and keyboard.)
- Thanks to elliwigy, for answering many questions and for a list of debloatable things.
- Thanks to geohot for root, ChainFire for SuperSU (and FlashFire), and Hashcode for SafeStrap. Without these 3 people, none of these ROMs would be possible.
I would also like to give a HUGE shoutout to Verizon, for locking the bootloaders and doing everything in their power to prevent any of this good stuff from happening.
Downloads:
Plasma ROM v1.0
OC4 Firmware only tar
Questions? Comments? Concerns? Use either the Q&A section of this fourm, or post it in the discussion. You could also PM me if you need to ask me anything that only I can answer. Some required details in problem reports:
The exact steps you took to install the ROM
How many times you reproduced the problem
How I can reproduce the problem
What you want me to do about the problem
Enjoy, and I could use some feedback/suggestions!
XDA:DevDB Information
[ROM] [5.0] Plasma ROM, ROM for the Verizon Samsung Galaxy S 5
Contributors
Nandr0idC0nsumer, Nandr0idC0nsumer, jrkruse, Thanks to elliwigy for a list of apps that are safe to debloat, I used jrkruse's OC4 ROM as a base, and AL_IRAQI, who made the layers themes
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Must be on OC4 Firmware - install guide shows how to do this
Based On: TouchWiz based
Version Information
Status: Beta
Created 2015-05-10
Last Updated 2015-05-10
NOTES
*Keep Your IMEI Backup Ready If you lost your IMEI and Blame us, We are Not Responsible
*If you Altered System Files in any way then dont report bugs
*Dont Report Bugs Which Are Caused Due to Third Party Apps, Only Report if there is any problem in this rom
*Battery life will get better over the time, at first few days it may be awful
*Feel Free To Post Fixes if you have a Solution to it
WHATS REQUIRED
*Micromax Unite 2 Device
*CTR v3 Recovery [recommended]
Disclaimer
HTML:
Your warranty is now void (or not?). I am not responsible if your phone turns out into a high-tampered mutant or a brick to play lego with. Do some research if you don't have any experience in flashing ROMs as you will be needing it,apparently. You are choosing to flash my build yourself, I have not compelled you toflash it. If you ever say I am responsible for anything happening to your phone, I will just sit back and watch FRIENDS.
Features
-Stock KK Based (so no bugs)
-Pre-Rooted With KingRoot
-Pre-Xposed Added
-Nova Launcher Pro as Default Home
-Viper4Android
-Fully Themed
-3Minit Battery
-3Minit Clock Mod
-Dynamatic Status Bar
-Font Chooser
-Floating Navigation Bar
-MultiWindow Option
-Xtreme Booster
-N more Explore u r Self
Whats Working?
Everything
Bugs
You Tell Me
Installation Instruction
1.Goto Recovery (CTR v3 Recommended)
2.click on Mounts/Storage , Then click on Format /system
3.Then Yes, then Format /cache n Format /data
4.go back on home , click on Install Zip,Then choose u r Sdcard (Sdcard0 is u r sdcard)
5.goto Fade_os zip n click on it , then yes
It will start installing rom
CWM/PhilZ Touch Recovery Users.
First Choose ‘Wipe Cache’.
Then Navigate to ‘advance’ and choose ‘Devlik Wipe Cache’ so you won’t get in any bootloop.
Then Finally Choose Wipe Data/Factory Reset.
Navigate to ‘Install zip from sd card’ another windows will open in front of you.
Select ‘choose zip from sd card’ from the Options.
Select the Fade_Os.zip file and confirm the installation on next screen.
Once the Installation is Over, Select +++++Go Back+++++.
Select Reboot Now to Reboot the System.
TWRP Users.
Tap on Wipe Button and Select Cache, System, Data.
Swipe the Confirmation Slider.
Go back to Main Menu and Tap Install Button.
Locate the Fade_Os.zip , Swipe the Slider To install it.
Once the Installation is Over, you will promoted to Reboot System Now
Select Reboot Now to Reboot the System.
Download
Link:- Fade OS v3
Credits
-Faud Mahmud Abir - For Devloping this ROM @Kingxteam -For Kingroot @Xposed -for this great tool @Viper4Android
sry if i didnt metioned anyone
XDA:DevDB Information
Fade OS v1 , ROM for the Micromax A106 Unite 2
Contributors
karbaz224
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2016-10-28
Created 2016-10-28
Last Updated 2016-10-28