I finally got my OTA lollipop update this week. All seemed fine untill I started getting and making calls and every call showed up as either private or unknown. I rebooted my phone hoping to fix the issue. It did, partially. Incomming calls now show the names or numbers of the caller in the log but outgoing still show either private or unknown. It appears that when the call didn't connect it shows as unknown and when it did, it shows as private. This occurs on either sim 1 or 2. I never had this issue before. Maybe resetting the phone will fix it but I'd rather not have to restore it so I'm asking here first. Any help would be greatly appreciated.
Related
Two or three times now its happened where if someone calls my phone and I miss the call, after they leave a voicemail I get notified of the voicemail, but then my phone starts ringing again instantly and the caller ID shows my own number. If I try to answer that "call" I get silence, then some random number dialing, then it disconnects. Any ideas?
The first time it happened I thought whoever had called just called right back but I missed that call as well. When I looked at my call log, it shows my own number as a missed call. It just happened now as I was sitting at my desk, I didnt answer because I was on my office phone, and just as I got the notification, I got another call from my own number. Seems odd to me...
Anyone else getting this ever?
~T.J.
EDIT: ARHD 3.6.7 and included kernel. Its happened on other versions of ARHD also however.
ive never had that issue due to my rom or hardware but i kno theres apps out there were someone can call you and itll show any # they want, including your own. If your rooted try a full wipe and fresh install otherwise someone can be messin with u
02CWRX said:
Two or three times now its happened where if someone calls my phone and I miss the call, after they leave a voicemail I get notified of the voicemail, but then my phone starts ringing again instantly and the caller ID shows my own number. If I try to answer that "call" I get silence, then some random number dialing, then it disconnects. Any ideas?
The first time it happened I thought whoever had called just called right back but I missed that call as well. When I looked at my call log, it shows my own number as a missed call. It just happened now as I was sitting at my desk, I didnt answer because I was on my office phone, and just as I got the notification, I got another call from my own number. Seems odd to me...
Anyone else getting this ever?
~T.J.
Click to expand...
Click to collapse
I could only think this is your phone's way of telling you to check your voicemail. usually, on t-mobile anyway, if you dial your own cell phone number it redirects you to your voicemail. It could be an error with your firmware or network though. Have you made any changes to your phone recently (i.e. ROM change/update)? Think of any possible conditions that may have changed with your phone since this started. Have you contacted your provider? Check your online call history through your carrier site and see if the same number appears at the time of call. If it does, the issue could be someone spoofing you. You can do this with spoofcard/spoofapp. It's hard to actually connect with a phone with the same number you're spoofing though, since it redirects to voicemail. As a precaution, i'd add a pin to my voicemail if I were you- in the event that this is the case. I found this out by spoofing one of my buddies once. In an attempt to boggle his mind, I tried using his number as the number of origin and found out that it directed to his voicemail, giving me access to that information.
It happens if I call my own phone from my house and leave a voicemail. I dont think its anyone spoofing my number. As you said, its almost like the phone gets a notification from a remote computer and a call from it at the same time.
I has done it at least once with every version of ARHD I have ran, but not all the time.
~T.J.
Call up your voicemail and go through the main menu to make sure voicemail paging notifications are turned off.
Ha! I bet that was it! Thanks go to you sir.
It was turned on for urgent messages (which explains why not all did it). When I turned it off and left myself a voice mail test it didn't do it. Weird, I wonder how it got turned on...
~T.J.
Hi I can't make or receive phone calls. when I press call it just says dialing and then the call ends after 10 seconds, it never connects. I have tried factory resetting, odin back to stock, resetting my service for my number, opening up the phone and removing/reconnecting the radio, reseating the sim, and the problem still exists. I can't get any number to connect, even voicemail and any * numbers. Any ideas? Please help.
anyone?
I'm rooted, running stock Lollipop Sense 6.0 software number 4.28.502.1
I can send and receive texts with no problem.
Whenever I try to dial a number the call immediately ends without even a dial tone. Whenever I get a call, I have no option to answer the phone, I receive no notification of an incoming call or of a missed call. In fact the only way I even know someone tried to call me at all is because YouMail sends me an email letting me know a voicemail was left.
Some background: I had been using the module/app "Blacklist" with the Xposed Framework for about 3 weeks. It had been working fine, without a hitch, in blocking 3 numbers from calling me. I don't know that this is the app that has caused the problem, but it has root permissions to end all calls prematurely and I had it in the settings to leave no notifications when it blocked a call from a number on my blacklist. So I figured that might be the best place to start.
First, I checked "Do Not Block Calls" w/in Blacklist, rebooted my phone, but nothing changed.
Then I unchecked the box next to its module in Xposed, rebooted, but nothing changed.
Then I uninstalled the module/app all together, rebooted, but nothing changed.
Then I did a system restore from 4 weeks ago but nothing changed.
So finally I did factory data reset...and still, nothing has changed.
SIM: Could it be the SIM card? I haven't physically done anything to it. And would it let me still send and receive texts but not calls? I've downloaded a basic SIM info app from the Play Store and everything seems to look normal. Regardless, I bought a cheap unlocked Blu phone from Amazon which should arrive May 30, 2015, so I'll pop my SIM into that and see if it lets me make calls.
If you have any ideas or can help me at all, I'd greatly appreciate it.
Hi, thank you for using XDA Assist. The best place to get information on your device is in it's specific forum here, http://forum.xda-developers.com/htc-one-m8 For your specific question try asking here, http://forum.xda-developers.com/htc-one-m8/help/help-thread-htc-one-m8-questions-t2897783
Hey guys!
I’m using Samsung SM-G920FD already 2 years abt. running updated Android 7.0.
Got a following problem, Whenever I’m intended to make an outgoing call trying to call a friend of mine, my phone refuses to do so. It starts the process of call but freeze on stage of dialing picture mode and no beep tone or nothing is going on afterwards, as If I or the subscriber is offline. Although, the network signal level is at high and no any indications of malfunctions by phone are being shown.
Thus, the only fix solution I found I immediately restart my phone and only then can make/receive calls.
What could be the reason of such behavior and how to fix this annoying problem.
Thanking in you advance and looking forward to hear your solutions soonest.
Regards,
kozav100
I am looking for some information regarding a problem I am experiencing with my phone, I have 3 questions regarding it. I have stated them at the end of this lengthy post.
My phone is zte grand x2 model z850 and android build is 5.1, carrier is pcmobile in Canada.
The problem is that my android phone seems to work OK and receives calls correctly, but my doctor office, hospial booking office, and phones belonging to my workplace receive a tone followed by some type of reaching a disconnected number. My phone calling log shows no record of calls being received to phone.
The troubleshooting steps are sent email to pcmobile and received response to do a battery reset, pull out battery and sim card for at least one minute and reinstall. If it doesn't work call their customer support and get put through to tech support.
That did not work. Call to the tech support says that all 0:00 second calls end in response to some type of code (mentioned a specific code but I forget) and that it means my phone is responsible. She said android phones allow for rejecting calls based on various categories like toll free originating and such. And that the phones calls not getting through likely belong to a category I have blocked. She mentions just goto phone menu, settings, and something like call block, call reject and I will most likely find something there. If that doesn't work to do a backup and factory reset. To do that she says I need to call zte for help as she isn't allowed to help with it.
My zte phone interface only shows call barring settings with a few things like all incoming or incoming roaming, outgoing or outgoing roaming and that is it.
However it is possible that I came across via a web search a USSD code to ban telemarketers and used it. I just don't no what code it was or even if I did such a thing.
Anyway I called back their customer service to maybe get further help and had specific phone numbers and times of calls that were rejected by disconnected number messages from my workplace. To see if the problem could be isolated at my phone as a reason or maybe in the network somewhere. And was also wanting to know how I can unset the call reject if I have no interface to do it or undo it. Maybe even get confirmation that the noted calls are actually making it to my phone or getting dropped in the network. The new customer support first asked if it was a ported number and since it was, he checked with someone to see if it was a problem. The porting people said all calls were routed correctly through to my phone, but the customer support guy said there was no way to verify if my specific noted calls were included.
He mentions their tech support did not help with actual phone troubles, but he suggested I get another sim card and phone and use them in varios combinations with my phone and sim to get the working/ not working situations and isolate the problem. This I have not done yet as it seems like a lot of expense and jumping through hoops trying to fix a problem that seems like it should be able to be verified in a phone setting log somehow. He refused to put me through to tech support when I said I wanted him to anyway.
My emails with zte have them requesting I do a backup and factory reset, if that doesn't work then try a new sim card, if that doesn't work then book my phone for a repair with them.
So my question number 1 is:
Is there a USSD code that allows me to see settings or logs of such a call reject being used. I have tried *35**# which is supposed to show "incoming call barring" and it responds "Call barring Service has been disabled." My phone user interface doesn't provide for this as best as I can tell.
My question number 2 is:
What is the USSD code that I might have used to try and reject telemarketers which might issue tones that might indicate a disconnected number. I'm thinking this is the most likely reason for my troubles. I have been unsuccessful google searching for what I may have done. I find info on various USSD codes at this forum and elsewhere. But I'm not finding anything specific to help. I thought the *35**# would have helped but it doesn't. It is very possible I did do something like this with a USSD code which is causing my trouble.
.
Part 2 of this question is what would be the USSD codes to see the status or to unset such a thing.
My question number 3:
If there is no way to set status or see the status of call barring and rejecting logs or settings of the phone. If I do a phone reset, how is it possible that it could be the sim card instead. Does the sim card actually store call rejecting and barring settings as well.
Part of troubleshooting this involves me contacting third parties such as work, doctor, or hospital and asking them to try and call me and if not successful contact me someway else and tell me it was unsuccessful. I really doubt any of them want to do this for me more than once or twice. So I'm trying to gather info and limit my number of attempts. It would be real useful to be able to look up logs or settings somehow.
Would anyone know if the effect of *77 being used is that the caller experiences reaching a disconnected number. Or what do they usually experience.
In web searching possible codes I may have used, I came across the *77 code to reject anonymous callers. The *87 would be to unreject such a setting. Is there a method to check the current setting of either on or off somehow.
I am unable to test the specific phones getting the message of reaching a disconnected number. I will however have better access to one of the phones in three weeks time to see if *87 fixes my troubles.