Hello there,
I am trying to get my Verizon Galaxy S3 to work in Germany. I have rooted my phone and flashed JellyBeans vs. 0.1.8.
I followed the steps in this guide:
http://forum.xda-developers.com/showthread.php?t=1809314
When I am in the Mobile networks settings, I have changed the access points name to Vodafone (the carrier I am trying to use ) I have already changed the Network mode with the Phone Info app. After I try to change the access points name, it asks me to select a network operator. My phone then begins searching and it lists Vodafone DE as one of the options to select. When I select that option, my phone tries to register this option, but eventually it says "Unable to Connect, Try again later"
Can anyone offer any advice as to how to get my phone working with Vodafone? I've read and reread the guide I listed above, as well as searched for other threads that talk about issues similar to what I am experiencing, but I haven't had any luck. I would appreciate it so much if anyone has any suggestions!
Thanks!:fingers-crossed:
here is known problem in my Galaxy S 4SHV-E330K . I faced this problem for many days and was unable to use some GSM services like balance checking etc. Normally in other phone, I can check it with just dial *123#, now since
when I try to run USSD Code for checking balance. it start calling the code
I am using 4.4.2 kitkat.
I tried this on India, UK & Estonian sim cards but having same problem.
I tried to check/uncheck roaming data option also but no solution.
There is no solution in call setting s also.
Any genius from xda please help me to get rid of that please please please.
Email- [email protected]
Thanks
**********
solved roming auto dial pop-up says calling korea or calling other countries
download anycut
open and scroll down till roming auto dial
open it creat shortcut for homescreen
go to shortcut open and click off
thanks
Hi everyone
I got LG G3 phone when i put sim card it saying (searching for service) doesn't pick the network signal
if it was lock it was supposed to ask for network unlock but it doesn't ask for unlock code
i also restored it with hard reset setting but nothing came useful .
anyone has any idea how to fix this issue then kindly help me with .
any help will be appreciated .
tulipkhan said:
Hi everyone
I got LG G3 phone when i put sim card it saying (searching for service) doesn't pick the network signal
if it was lock it was supposed to ask for network unlock but it doesn't ask for unlock code
i also restored it with hard reset setting but nothing came useful .
anyone has any idea how to fix this issue then kindly help me with .
any help will be appreciated .
Click to expand...
Click to collapse
It is because you have AT&T provider ROM. These bastards remove and disable many stuff. You just dont have your new mobile operator settings on phone. But unlock without these you can this way:
- Please insert an accepted simcard
-Enter the following sequence on dialpad: 2945#*850# or 2945#*855#. <- 850 or 855 is your phone model number
-A hidden menu should appear
- In the network part please input the NCK code provided by our website.
-The phone is unlocked
Now go to Settings -> (More ...) -> Mobile networks -> Access point names
On right top corner click to three dots and click New APN
Insert needed settings for your operator and again click to right top corner to three dots -> Save
Reboot and you online
This phone is from Verizon usa
Boss when I put the code you said to prompt me for unlock code tried alot but doesn't ask when I insert Verizon sim saying your phone is activating wait and after some time getting message we r sorry we r unable to activate your phone I brought it from usa lately I'm in uk
Does anyone of you know the secret code to dial in the dialer to access the network settings. I remember using it once in my old android device and theres is an option for LTE only. In the setting the option is LTE/WCDMA/GSM therefore I can not force LTE only
Dial *#2263# and then click band selection then LTE then LTE all when you want to change back just click band selection then automatic
That did not work on my sm-g920f international version.
Must it be rooted?
ua549 said:
That did not work on my sm-g920f international version.
Must it be rooted?
Click to expand...
Click to collapse
No, it works without Root.
Go to the dialer and enter *#0011#.
Click on the menu icon on the top right and press Back.
Click on the menu icon on the top right again and press Key Input.
Type in Q and press okay
Then repeat step three, but enter 0000 this time. Wait until the Main Service Menu pops up (it can take up to 20 seconds).
Go to UE settings and Information -->Setting-->Protocol-->AS-->Frequency Lock-->LTE Cell Locking
Select the LTE band that you want your phone to lock into.
Reboot
LTE-X said:
No, it works without Root.
Go to the dialer and enter *#0011#.
Click on the menu icon on the top left and press Back.
Click on the menu icon on the top left again and press Key Input.
Type in Q and press okay
Then repeat step three, but enter 0000 this time. Wait until the Main Service Menu pops up (it can take up to 20 seconds).
Go to UE settings and Information -->Setting-->Protocol-->AS-->Frequency Lock-->LTE Cell Locking
Select the LTE band that you want your phone to lock into.
Reboot
Click to expand...
Click to collapse
It still doesn't work. Here is what I did:
Entered *#0011# in the dialer
Response Service Mode, Select STACK, STACK 1, STACK 2
Clicked on the more menu icon on the top right
Clicked Key Input
Entered Q and pressed OK
Clicked on the more menu icon on the top right
Clicked Key Input
Entered 0000 and pressed OK
The original menu did not change.
The device is an G920FXXU1AOE3 with Android 5.0.2
Without LTE it is going back to Amazon.
ua549 said:
It still doesn't work. Here is what I did:
Entered *#0011# in the dialer
Response Service Mode, Select STACK, STACK 1, STACK 2
Clicked on the more menu icon on the top right
Clicked Key Input
Entered Q and pressed OK
Clicked on the more menu icon on the top right
Clicked Key Input
Entered 0000 and pressed OK
The original menu did not change.
The device is an G920FXXU1AOE3 with Android 5.0.2
Without LTE it is going back to Amazon.
Click to expand...
Click to collapse
Sorry about the right and left confusion, that was unintentional. I did fixed that. Thanks!
Did you press "back" from the more icon before the Key Input?
LTE-X said:
Sorry about the right and left confusion, that was unintentional. I did fixed that. Thanks!
Did you press "back" from the more icon before the Key Input?
Click to expand...
Click to collapse
Just after my last post the S6 totally stopped connecting. I wonder if it is one of the counterfeits I've been reading so much about. Anyway, the phone is on its way back to Amazon.
Thanks for your help.
ua549 said:
Just after my last post the S6 totally stopped connecting. I wonder if it is one of the counterfeits I've been reading so much about. Anyway, the phone is on its way back to Amazon.
Thanks for your help.
Click to expand...
Click to collapse
Alright! Good luck to you!
Guys is there any way to force this silly phone to switch to lte? Menu 2263 doesn't work and tip above also doesn't work...
Wysłane z mojego SM-G920F przy użyciu Tapatalka
I have a feeling this may be my problem with my Galaxy s6 as well.
Doesn't anyone know how to force LTE then? Or just even how to switch between the options of LTE/GSM ect
I'm having the same issue with my international version of my S6 too, no possible way to force LTE only bands?
Same problem here. Only way for me is to to toggle WCDMA and Lte
Skickat från min Nexus 5 via Tapatalk
2 ways to do this.
1. Root your phone and install Advance Signal Status in playstore. Once installed, open the app > go to Additional Info > Device Information > and look for Set Preferred Network Type dropdownlist. You can choose LTE from there.
2. You need Root + Xposed Framework. After installing Xposed, Download Intelli3g module and from there, you can toggle Fast And Slow Network Mode. Just be sure one of them is set to LTE only.
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
FyI Stock Latest firmwares will not allow you to change or modify the radio settings on your phone using service dial codes.
So Im going to bump this due to the fact i had ran into this problem exactly. I bought my s6 edge out right from the only store that would do that at the time which was wind mobile. wind your supposed to get 4g max is what the icon says but after using the Advance Signal Status apk with being rooted and all that showed to be working was 2g/3g everything else was n/a. **** you wind your a horrible company. Anyways after millions of dropped and echo filled calls that didnt drop or the turtle like so called high speed internet. i went to telus got a sim card and a plan and put in the sim card and i get a 3 g signal and the apk shows the same thing. i called tech support and this guy went above and beyond the usual script those idiots read over and over when they dont know what they actually do there. at the end of the call he says im sorry my coworker is saying if it was from wind you wont get lte on that phone with us. i had no way to choose lte through my phone settings and it was driving me crazy. so after a little research and a little playing around with the band selection by going *2263# first selection in the list. i tried going straight to lte only and it went over switched from 3g to 4g+ aka lte also verified by the advance signal status the only **** active was the lte section... so i thought yes i did it so i try a call and wtf immediately the phone would end the call every time and incoming went to voicmail every time. so i then started to try the different lte combos and to save someone time i ended up with the lte+cdma(prl) and after that it stayed with lte band and the phone calls work.
just because some tech support told you you cant run some sim cards on some phones unlocked or not because of frequency's of the carrier, but thats noy true and i proved that to my self today. have some patients and make sure you have a back up ready and waiting just in case at all times ive learned the hard way too many times saying this flash is a quickie im good lol nooope ...anyways i will also be getting a wind sim to work on the s4 wind says it cant be done but i say other wise i will post my findings on the appropriate pages.
i hope this helps some people
batuzai04123 said:
2 ways to do this.
1. Root your phone and install Advance Signal Status in playstore. Once installed, open the app > go to Additional Info > Device Information > and look for Set Preferred Network Type dropdownlist. You can choose LTE from there.
2. You need Root + Xposed Framework. After installing Xposed, Download Intelli3g module and from there, you can toggle Fast And Slow Network Mode. Just be sure one of them is set to LTE only.
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
FyI Stock Latest firmwares will not allow you to change or modify the radio settings on your phone using service dial codes.
Click to expand...
Click to collapse
Guys no need to root to force LTE Only mode on INTERNATIONAL S6 just download this app from Playstore for free here and click 'Switch'
https://play.google.com/store/apps/details?id=mi.leyo.networkswitcher
Not found an app that allows you to select individual LTE radio bands though without ROOT.
My device is Samssung SM g531 f.(rooted.)
. can anyone help me how to switch it LTE only....
1. download and install MTK Engineer App from google play store
2. run it and choose LTE Switcher menu
3. set LTE only at set preferred netwok.
all have done !
for detail information please go to http://www.teknokia.com/2017/08/how-to-lock-4g-only-or-lte-only-on.html
It doesn't work on Galaxy S6 Dubai one
Both the code doesn't work on my Dubai Galaxy s6
you can going to this thread https://forum.xda-developers.com/showpost.php?p=83536505&postcount=5
Hello and Good time to everybody,
I buyed a Huawei G6-L22 (4G) and there is a problem at this.
when I unpack the box and turn-on the device and started it, I cann't see any notification in above the phone screen.
also I put in Sim card for calling but nobody can call me and if he/she calling me I cann't see his name or phone number on the screen while I open Dialpad App!!!!,
In next I should to explain about notification. the problem is I cann't see operator name or 2g/3g/4g band and anything above the screen. It seems same as Full screen window in Windows Desktops!!
the build number is: L22V100R001C64B138
anyone can assist me at this case?
I Appreciate.
Thanks.
try factory reset?
If this problem is from the moment you bought it then maybe you have a phone for another region?
maybe use your warranty?
I could only find this firmware for L22:
http://consumer.huawei.com/detest/m...upport/downloads/detail/e5373-de.htm?id=63883
Gamexland said:
Hello and Good time to everybody,
I buyed a Huawei G6-L22 (4G) and there is a problem at this.
when I unpack the box and turn-on the device and started it, I cann't see any notification in above the phone screen.
also I put in Sim card for calling but nobody can call me and if he/she calling me I cann't see his name or phone number on the screen while I open Dialpad App!!!!,
In next I should to explain about notification. the problem is I cann't see operator name or 2g/3g/4g band and anything above the screen. It seems same as Full screen window in Windows Desktops!!
the build number is: L22V100R001C64B138
anyone can assist me at this case?
I Appreciate.
Thanks.
Click to expand...
Click to collapse
Use warranty ... is a new phone, right?