Does anyone of you know the secret code to dial in the dialer to access the network settings. I remember using it once in my old android device and theres is an option for LTE only. In the setting the option is LTE/WCDMA/GSM therefore I can not force LTE only
Dial *#2263# and then click band selection then LTE then LTE all when you want to change back just click band selection then automatic
That did not work on my sm-g920f international version.
Must it be rooted?
ua549 said:
That did not work on my sm-g920f international version.
Must it be rooted?
Click to expand...
Click to collapse
No, it works without Root.
Go to the dialer and enter *#0011#.
Click on the menu icon on the top right and press Back.
Click on the menu icon on the top right again and press Key Input.
Type in Q and press okay
Then repeat step three, but enter 0000 this time. Wait until the Main Service Menu pops up (it can take up to 20 seconds).
Go to UE settings and Information -->Setting-->Protocol-->AS-->Frequency Lock-->LTE Cell Locking
Select the LTE band that you want your phone to lock into.
Reboot
LTE-X said:
No, it works without Root.
Go to the dialer and enter *#0011#.
Click on the menu icon on the top left and press Back.
Click on the menu icon on the top left again and press Key Input.
Type in Q and press okay
Then repeat step three, but enter 0000 this time. Wait until the Main Service Menu pops up (it can take up to 20 seconds).
Go to UE settings and Information -->Setting-->Protocol-->AS-->Frequency Lock-->LTE Cell Locking
Select the LTE band that you want your phone to lock into.
Reboot
Click to expand...
Click to collapse
It still doesn't work. Here is what I did:
Entered *#0011# in the dialer
Response Service Mode, Select STACK, STACK 1, STACK 2
Clicked on the more menu icon on the top right
Clicked Key Input
Entered Q and pressed OK
Clicked on the more menu icon on the top right
Clicked Key Input
Entered 0000 and pressed OK
The original menu did not change.
The device is an G920FXXU1AOE3 with Android 5.0.2
Without LTE it is going back to Amazon.
ua549 said:
It still doesn't work. Here is what I did:
Entered *#0011# in the dialer
Response Service Mode, Select STACK, STACK 1, STACK 2
Clicked on the more menu icon on the top right
Clicked Key Input
Entered Q and pressed OK
Clicked on the more menu icon on the top right
Clicked Key Input
Entered 0000 and pressed OK
The original menu did not change.
The device is an G920FXXU1AOE3 with Android 5.0.2
Without LTE it is going back to Amazon.
Click to expand...
Click to collapse
Sorry about the right and left confusion, that was unintentional. I did fixed that. Thanks!
Did you press "back" from the more icon before the Key Input?
LTE-X said:
Sorry about the right and left confusion, that was unintentional. I did fixed that. Thanks!
Did you press "back" from the more icon before the Key Input?
Click to expand...
Click to collapse
Just after my last post the S6 totally stopped connecting. I wonder if it is one of the counterfeits I've been reading so much about. Anyway, the phone is on its way back to Amazon.
Thanks for your help.
ua549 said:
Just after my last post the S6 totally stopped connecting. I wonder if it is one of the counterfeits I've been reading so much about. Anyway, the phone is on its way back to Amazon.
Thanks for your help.
Click to expand...
Click to collapse
Alright! Good luck to you!
Guys is there any way to force this silly phone to switch to lte? Menu 2263 doesn't work and tip above also doesn't work...
Wysłane z mojego SM-G920F przy użyciu Tapatalka
I have a feeling this may be my problem with my Galaxy s6 as well.
Doesn't anyone know how to force LTE then? Or just even how to switch between the options of LTE/GSM ect
I'm having the same issue with my international version of my S6 too, no possible way to force LTE only bands?
Same problem here. Only way for me is to to toggle WCDMA and Lte
Skickat från min Nexus 5 via Tapatalk
2 ways to do this.
1. Root your phone and install Advance Signal Status in playstore. Once installed, open the app > go to Additional Info > Device Information > and look for Set Preferred Network Type dropdownlist. You can choose LTE from there.
2. You need Root + Xposed Framework. After installing Xposed, Download Intelli3g module and from there, you can toggle Fast And Slow Network Mode. Just be sure one of them is set to LTE only.
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
FyI Stock Latest firmwares will not allow you to change or modify the radio settings on your phone using service dial codes.
So Im going to bump this due to the fact i had ran into this problem exactly. I bought my s6 edge out right from the only store that would do that at the time which was wind mobile. wind your supposed to get 4g max is what the icon says but after using the Advance Signal Status apk with being rooted and all that showed to be working was 2g/3g everything else was n/a. **** you wind your a horrible company. Anyways after millions of dropped and echo filled calls that didnt drop or the turtle like so called high speed internet. i went to telus got a sim card and a plan and put in the sim card and i get a 3 g signal and the apk shows the same thing. i called tech support and this guy went above and beyond the usual script those idiots read over and over when they dont know what they actually do there. at the end of the call he says im sorry my coworker is saying if it was from wind you wont get lte on that phone with us. i had no way to choose lte through my phone settings and it was driving me crazy. so after a little research and a little playing around with the band selection by going *2263# first selection in the list. i tried going straight to lte only and it went over switched from 3g to 4g+ aka lte also verified by the advance signal status the only **** active was the lte section... so i thought yes i did it so i try a call and wtf immediately the phone would end the call every time and incoming went to voicmail every time. so i then started to try the different lte combos and to save someone time i ended up with the lte+cdma(prl) and after that it stayed with lte band and the phone calls work.
just because some tech support told you you cant run some sim cards on some phones unlocked or not because of frequency's of the carrier, but thats noy true and i proved that to my self today. have some patients and make sure you have a back up ready and waiting just in case at all times ive learned the hard way too many times saying this flash is a quickie im good lol nooope ...anyways i will also be getting a wind sim to work on the s4 wind says it cant be done but i say other wise i will post my findings on the appropriate pages.
i hope this helps some people
batuzai04123 said:
2 ways to do this.
1. Root your phone and install Advance Signal Status in playstore. Once installed, open the app > go to Additional Info > Device Information > and look for Set Preferred Network Type dropdownlist. You can choose LTE from there.
2. You need Root + Xposed Framework. After installing Xposed, Download Intelli3g module and from there, you can toggle Fast And Slow Network Mode. Just be sure one of them is set to LTE only.
---------- Post added at 10:45 PM ---------- Previous post was at 10:43 PM ----------
FyI Stock Latest firmwares will not allow you to change or modify the radio settings on your phone using service dial codes.
Click to expand...
Click to collapse
Guys no need to root to force LTE Only mode on INTERNATIONAL S6 just download this app from Playstore for free here and click 'Switch'
https://play.google.com/store/apps/details?id=mi.leyo.networkswitcher
Not found an app that allows you to select individual LTE radio bands though without ROOT.
My device is Samssung SM g531 f.(rooted.)
. can anyone help me how to switch it LTE only....
1. download and install MTK Engineer App from google play store
2. run it and choose LTE Switcher menu
3. set LTE only at set preferred netwok.
all have done !
for detail information please go to http://www.teknokia.com/2017/08/how-to-lock-4g-only-or-lte-only-on.html
It doesn't work on Galaxy S6 Dubai one
Both the code doesn't work on my Dubai Galaxy s6
you can going to this thread https://forum.xda-developers.com/showpost.php?p=83536505&postcount=5
Related
LTE is back online, please follow steps at the bottom of this post to get everything back in order.
*If you are in a 4G area it is advisable to make sure you switch to eHRPD to avoid bad hand offs between 4G and 3G as well as allowing simultaneous voice without hiccups. I noticed my GPS was not working last night so it is possible eHRPD settings will affect your gps or it could have just been due to the network issues.
As most are aware both the LTE network and eHPRD are down (a special version of 3G for the Thunderbolt only). To get 3G data back you just need to change your settings back to the normal 3G network. Here are the steps:
Dial ##778# and hit send
A pop-up window named EPST will show up giving you 2 choices: View Mode and Edit Mode. Pick: Edit Mode.
Enter the Password: 000000
Go down to Modem Settings and pick “Rev A“
You’ll want to choose enable and click OK, hit the menu button and then press “Commit Modifications.”
Restart your phone and you should see 3G is working
last step (may not be necessary)
dial *#*#4636#*#* go to phone info, then set preferred network type to CDMA auto (PRL)
I hope this helps anyone that is left in the dark by this outage.
If you are running a non-stock dialer or a rom that included a dialer it may prevent you from entering settings. Flash this zip to go back to stock dialer
http://www.mediafire.com/?9yf09ri4t2mip4z
For those that want instructions for after LTE is back on
These 2 steps will put you back on LTE and then put you back on the correct 3G for the Thunderbolt, when its back up.
dial *#*#4636#*#* to get LTE, go to phone info, set preferred network type to CDMA + LTE EvDo auto
Dial ##778# and hit send
A pop-up window named EPST will show up giving you 2 choices: View Mode and Edit Mode. Pick: Edit Mode.
Enter the Password: 000000
Go down to Modem Settings and pick “Rev A“
You’ll want to choose eHRPD and click OK, hit the menu button and then press “Commit Modifications.”
wakestrong said:
As most are aware both the LTE network and eHPRD are down (a special version of 3G for the Thunderbolt only). To get 3G data back you just need to change your settings back to the normal 3G network. Here are the steps:
Dial ##778# and hit send
A pop-up window named EPST will show up giving you 2 choices: View Mode and Edit Mode. Pick: Edit Mode.
Enter the Password: 000000
Go down to Modem Settings and pick “Rev A“
You’ll want to choose eHRPD and click OK, hit the menu button and then press “Commit Modifications.”
I hope this helps anyone that is left in the dark by this outage.
Click to expand...
Click to collapse
Isn't this selected by default? I changed it to "enabled" let it reboot, and 3G is back on.
By default we are setup for the eHPRD 3G network on the Thunderbolt because it allows faster switching between 4G and 3G. Since both network features are down you have to switch your settings to the 3G network used by all other Verizon phones.
wakestrong said:
As most are aware both the LTE network and eHPRD are down (a special version of 3G for the Thunderbolt only). To get 3G data back you just need to change your settings back to the normal 3G network. Here are the steps:
Dial ##778# and hit send
A pop-up window named EPST will show up giving you 2 choices: View Mode and Edit Mode. Pick: Edit Mode.
Enter the Password: 000000
Go down to Modem Settings and pick “Rev A“
You’ll want to choose eHRPD and click OK, hit the menu button and then press “Commit Modifications.”
I hope this helps anyone that is left in the dark by this outage.
Click to expand...
Click to collapse
eHRPD is the new 3g in thunderbolt I believe you need to select enable.
wakestrong said:
By default we are setup for the eHPRD 3G network on the Thunderbolt because it allows faster switching between 4G and 3G. Since both network features are down you have to switch your settings to the 3G network used by all other Verizon phones.
Click to expand...
Click to collapse
so select enabled then correct?
wakestrong said:
By default we are setup for the eHPRD 3G network on the Thunderbolt because it allows faster switching between 4G and 3G. Since both network features are down you have to switch your settings to the 3G network used by all other Verizon phones.
Click to expand...
Click to collapse
yea but in your instructions you said select eHPRD, which is already selected.
Yes enable, sorry I was too fast in typing out my instructions and goofed
one more step guys, if you are on auto cdma/lte settings, you might have to go in to
*#*#4636#*#* and select phone info and then select EVDO only to get 3g under preffered network settings.
It would be nice if you could add this to OP wakestrong. I think people in 4g area have cdma/lte auto option enabled so in the phone settings the phone is still trying to pick up the older cdma.
So this has worked for everyone? I tried this earlier with no luck and just did it again with no luck either :/
Nate14 said:
So this has worked for everyone? I tried this earlier with no luck and just did it again with no luck either :/
Click to expand...
Click to collapse
No luck for me either. Im good tho. Im home and will be off and home tomorrow so I'll just use wifi until they fix it.
Nate14 said:
So this has worked for everyone? I tried this earlier with no luck and just did it again with no luck either :/
Click to expand...
Click to collapse
Look post above. You might have cdma/lte auto enabled under phone info menu so it is still searching for 4g and older 3g.
ITS NKD man Not NDK, lol.
nkd said:
Look post above. You might have cdma/lte auto enabled under phone info menu so it is still searching for 4g and older 3g.
Click to expand...
Click to collapse
Just saw, thanks for the tip.
Nate14 said:
Just saw, thanks for the tip.
Click to expand...
Click to collapse
technically if you would have waited it would have eventually gone to 3g but might have taken a while, but that option is just an easy way of doing it.
thanks for the tip
nkd said:
ITS NKD man Not NDK, lol.
Click to expand...
Click to collapse
lol, you gotta pick on the dyslexic guy huh?
JK
wakestrong said:
lol, you gotta pick on the dyslexic guy huh?
JK
Click to expand...
Click to collapse
I cry if someone messes up my screenname, lol.
wakestrong said:
As most are aware both the LTE network and eHPRD are down (a special version of 3G for the Thunderbolt only). To get 3G data back you just need to change your settings back to the normal 3G network. Here are the steps:
Dial ##778# and hit send
A pop-up window named EPST will show up giving you 2 choices: View Mode and Edit Mode. Pick: Edit Mode.
Enter the Password: 000000
Go down to Modem Settings and pick “Rev A“
You’ll want to choose enable and click OK, hit the menu button and then press “Commit Modifications.”
I hope this helps anyone that is left in the dark by this outage.
edit 2 suggested by NKD: one more step guys, if you are on auto cdma/lte settings, you might have to go in to
*#*#4636#*#* and select EVDO only to get 3g.
My thunderbolt worked on auto cdma/lte but this may cause less conflict.
Click to expand...
Click to collapse
Thanks a million! It worked. Good night, I was on 1x ever since I flashed the stock rom. I thought for a while it was an error on my part. Talk about bad timing.
I love all the nifty little tricks we find on the internet
Thanks OP.
First the PSN is down for a few days, and now Verizon's new network. Wth?
raider3bravo said:
Thanks a million! It worked. Good night, I was on 1x ever since I flashed the stock rom. I thought for a while it was an error on my part. Talk about bad timing.
Click to expand...
Click to collapse
Yea I could see how that would be a stressful situation. Glad it worked out for you.
The thunderbolt had this and it was nice.
Basically when I'm at work I'm in a fringe 4g area. If I leave the phone in 3g/4g auto mode then it constantly switches between the two and it destroys my battery. Not only that but it makes 4g basically unusable for me as it never stays on long enough to do anything with it.
On the thunderbolt by going into the phone info settings you could select LTE only mode.
On the Charge you only have the options of going CDMA only or CDMA/LTE auto. There is no LTE only option.
Is this something that can be corrected by an app or rom or kernel or is it built into the radio software?
I used the phone info app that worked great on the thunderbolt and on the charge it just comes up with a bunch of options like WCDMA only, GSM only and such and as far as I can tell none of them actually do anything.
Hopefully someone knows the answer to this because I like tethering to my tablets at work but if I can't have consistent 4g then I'm gonna be forced to return to my tbolt which is a shame because I like this charge alot better.
I haven't pucked up a Charge yet, but most Sammy phones let you for some fine grain tuning if the radio and other system settings via a menu accessed by a dialer code.
You could try *#*#197328640#*#* (is debug mode) and dig in from there.
Sent from Thunderbolt
distortedloop said:
I haven't pucked up a Charge yet, but most Sammy phones let you for some fine grain tuning if the radio and other system settings via a menu accessed by a dialer code.
You could try *#*#197328640#*#* (is debug mode) and dig in from there.
Sent from Thunderbolt
Click to expand...
Click to collapse
Already tried that, it doesn't work on the charge. It just dials and you get the "Welcome to Verizon wireless, your call cannot be completed as dialed" message.
I believe if you go settings ->wireless and network->mobile networks->system selection change it to CDMA mode will disable LTE.
you can try dialing "*#*#4636#*#*" that takes me to a hidden menu on the thunderbolt. If it works, from that menu select "phone Information" then select LTE only. or if you want to disable 4g (Helps battery in non 4g areas) you can select "CDMA auto(prl)"
thetwiztidfreak said:
you can try dialing "*#*#4636#*#*" that takes me to a hidden menu on the thunderbolt. If it works, from that menu select "phone Information" then select LTE only. or if you want to disable 4g (Helps battery in non 4g areas) you can select "CDMA auto(prl)"
Click to expand...
Click to collapse
Beat me to it
Sent from my ADR6400L using XDA Premium App
Thanks but did you guys even read my original post?
For starters, I'm not trying to disable LTE... I'm trying to force LTE only.
Secondly, as I previously said, This phone does not have the same radio options that the thunderbolt does. There is no option for LTE only. I understand the difference between CDMA auto PRL, CDMA/LTE auto and LTE only. THE PROBLEM IS THIS PHONE DOES NOT HAVE AN LTE ONLY OPTION!
I tried the phone info app that works on the thunderbolt, the only options are all for WCDMA only, GSM only and CDMA only and various combinations of them. There is no LTE only. Besides, none of the options present in that menu actually change anything, only the 2 that are built into the wireless network settings do (CDMA only and CDMA/LTE Auto).
Not trying to be a **** but if you're gonna post something to try and answer a question or help someone at least make sure you read the question.
In the same boat as you. I actually get decent service on LTE at home, and virtually nothing on 3G... go figure, but it keeps trying.
navycow said:
In the same boat as you. I actually get decent service on LTE at home, and virtually nothing on 3G... go figure, but it keeps trying.
Click to expand...
Click to collapse
i have the same problem as both you guys and this is so frustrating. when its connected to 4g i get between 8-10mb down. i also have a samsung mifi hotspot for verizon and it shows a strong 4g signal and gets over 10mb down consistently in the very same location.
i have no idea why my droid charge keeps switching between 4g and 3g. the funny thing is the only reason i really mind is because the 3g signal is horrible. if i was getting 2mb down on the 3g like i have seen at other locations i wouldnt mind at all.
yeah i have the same issue as well, i'm really not even sure what it's testing to decide to switch from 4g to 3g, i live about 100 yards from the verizon tower i'm connecting to and have full reception on both 4g and 3g but yet it still switches randomly between the 2, we really need a way to disable 3g
Sent from my Xoom using XDA Premium App
Still nothing on this front? I'm afraid I'm gonna have to return my charge tomorrow then =(
No LTE only mode = no 4g for me.
I already did and canceled Verizon, I'll have to stick with sprint. I really loved the charge, and wanted to keep it and stay with Verizon , but my evo gets a full 4g signal both at home and work. Too bad, the charge was an awesome phone
Sent from my SPH-D700 using XDA App
It actually seems to be the way android handles 4G, either on purpose or just coincidentally.
I have the same issue at work with Sprint, 4G gives me 2-3 bars but there is NO 3G, but it turns 4G off when the screen is locked, so it sits there trying to get backups in 3G all day, spare parts lets you force wifi to stay on, surely there should be a similar switch for 4G a dev could find.
Any luck on this issue here? I have a feeling I'm in a fringe area where it could potentially switch me between networks quite often...
Is it safe to assume that an LTE-only option is impossible unless Samsung does something to enable this functionality out of their LTE chip (CMC220)?
Any updates on a LTE/4G only option?
I found out how to force LTE Only ...
Warning! If this bonks up your phone, don't blame me!
Use at your own risk!
Now that we got that out of the way, here is what I have found:
Enable the Hidden Menu option by entering the following code in your phone dialer: *#22745927
Enter an SPC of: 000000
Select: Hiddenmenu Enable
Select: OK (Your phone may reset after this)
To get to the "Force CMDA/LTE/Global" menu, enter the following code in your phone dialer: **583
If you press the LTE button, you will be fixed on the LTE network.
Reset your phone
Taaa-daa!
Note: You apparently need connectivity to the CDMA network to make phone calls & text messages (Thanks, chaoscentral!) Oh, well ...
To reset back to the normal LTE/CDMA automatic selection mode:
Go to the "Force CMDA/LTE/Global" menu by enter the following code in your phone dialer: **583
Press the CDMA button, which will re-enable your phone to default to the CDMA network.
Reset your phone
When your phone boots back up, go to: Settings >> Wireless & network >> Mobile networks >> System selection >> LTE automatic
Cheers!
just keep in mind LTE only mode means no phone calls or text messages. since those go over CDMA
Ah, I should've guessed they would make the phone code for this hidden menu option "LTE". Now I wish there was a way to only disable EV-DO 3G (leaving CDMA intact for phone calls/texts). Can't have it all I guess...
Thanks for this regardless!
PeterDLai said:
Ah, I should've guessed they would make the phone code for this hidden menu option "LTE". Now I wish there was a way to only disable EV-DO 3G (leaving CDMA intact for phone calls/texts). Can't have it all I guess...
Thanks for this regardless!
Click to expand...
Click to collapse
Yep. I tried goofing around with a few different options on the "LTE" theme, but nothing came up.
Then, I realized that I had loaded new ROMs since the last time I had enabled the Hidden Menus option, and figured out that my Hidden Menus were no longer enabled. Once I re-enabled the hidden menus, I tried *#LTE#* (which didn't work), and then **LTE, which did.
BTW, for anyone that has had problems making phone calls after following my original settings, I have updated the post on to how to get back to automatic LTE/CDMA.
Also, has anyone tried that **583 "Global" option yet? Verrrry Interesting!! (But, spooky!)**
Ain't messin' with your phone fun?
** Anyone who gets this reference wins one "Bippy".
I have had several instances where something I have done to my phone created a situation where I had no phone dialing capability. The error message when attempting to dial is "mobile network not available", and I'd get notice of "searching for network".
Restoring the com.android.phone app did not help with this. Neither did the suggestion seen elsewhere about entering ##72786# into the keypad to reprogram. The past solutions was to do a factory reset/wipe and then a restore of apps...pain in the a**.
Today I was able to work out another solution that has resolved this issue for me (at least this time)!.
1. Download Anycut app from http://www.freewarelovers.com/android/download/temp/1281882094_Any_Cut_1.0.apk, and open.
2. Make a new shortcut to activity named IOTHiddenMenu (the first one of three with the same name in the list)
3 Open this shortcut and select the following: TestMode Menu>UTMS>Debug Screen>Phone Control>Network Control>Band Selection>Automatic, then hit back twice to get to your main screen.
4. Download Phone Info ([email protected]) from Google Play, and open
5. Use Phone Info app to change preferred network type "“LTE/CDMA/EvDo" (click on Device Information and scroll down for first box to select and change).
If this works to solve your same issue, let me know in the thread.
And if it helps...give a thanks.
Lair12, now that I am back in the US, for the first time since using my S3 outside the US, I'm getting the no network error as you describe here...
I've tried the steps you describe here, but I still can't dial out (I do have 4g data).
I was wondering if you might have any other ideas before I start flashing? Any insights would be greatly Appreciated!
I had a similar issue recently where I could receive texts and utilize data but nothing else. Attempting to dial out would lead to the "Mobile Network Not Available."
This problem first occurred after putting a T-mobile sim in the phone. I tried numerous things such as playing with the phone settings in phoneinfo and I even restored the Verizon image which re-rooted my phone but nothing would help.
I decided to place my microsim into my thunderbolt (with an adapter of course). The thunderbolt worked just fine (phone calls, SMS and Data).
I then placed the microsim from the thunderbolt back into the S3 and everything went back to working as normal. Not sure if it will work for anyone else but I figured I would share since I went crazy trying to find a solution that did not require a full factory reset.
Well, just to close the loop, I was never able to restore my voice connection... I ended up having to reset the phone back to stock to get it back...
Oh well, it gave me a reason to try out CM10!
Beemer533 said:
Well, just to close the loop, I was never able to restore my voice connection... I ended up having to reset the phone back to stock to get it back...
Oh well, it gave me a reason to try out CM10!
Click to expand...
Click to collapse
I'm necro-ing this thread since it just happened to me and I found a fix on CM10.1 given the root cause. Also, Anycut no longer exists in the store -- try using "QuickShortcutMaker" instead.
This seems to happen when the radio gets switched off the correct frequency. To get it back (in CM10.1), you have to dial *#*#4636#*#* . As soon as you hit the last *, you will be taken to a "Testing" menu.
Click "Phone information" then make sure your phone number and IMEI look roughly correct. Then press the "Menu" softkey and then "Select radio band". For Verizon CDMA/LTE, this should be set on "Cellular (800-MHz)". Tap it, and the signal indicator in the menu bar should go back to normal. Also make sure the "Preferred network type" is set to "LTE/CDMA auto (PRL)". (This is also where you enable "GSM auto (PRL)" if you want to make it a WorldPhone.)
The other option in here is USA band (GSM-850/PCS-1900/WCDMA-850/WCDMA-PCS-1900), which I presume is for GSM compatibility since "Global" isn't an option in the "Mobile Networks" menu in CM10.1 (without a certain cherrypick).
HMkX2 said:
I'm necro-ing this thread since it just happened to me and I found a fix on CM10.1 given the root cause. Also, Anycut no longer exists in the store -- try using "QuickShortcutMaker" instead.
This seems to happen when the radio gets switched off the correct frequency. To get it back (in CM10.1), you have to dial *#*#4636#*#* . As soon as you hit the last *, you will be taken to a "Testing" menu.
Click "Phone information" then make sure your phone number and IMEI look roughly correct. Then press the "Menu" softkey and then "Select radio band". For Verizon CDMA/LTE, this should be set on "Cellular (800-MHz)". Tap it, and the signal indicator in the menu bar should go back to normal. Also make sure the "Preferred network type" is set to "LTE/CDMA auto (PRL)". (This is also where you enable "GSM auto (PRL)" if you want to make it a WorldPhone.)
The other option in here is USA band (GSM-850/PCS-1900/WCDMA-850/WCDMA-PCS-1900), which I presume is for GSM compatibility since "Global" isn't an option in the "Mobile Networks" menu in CM10.1 (without a certain cherrypick).
Click to expand...
Click to collapse
Interesting, thanks for the follow up!
I'm currently running Paranoid Android, but this my work for that as well. The next time I leave the US for work, (if I see this issue) I'll give it a try..
Doesnt Work for me, BUT EFS Pro Does!
HMkX2 said:
I'm necro-ing this thread since it just happened to me and I found a fix on CM10.1 given the root cause. Also, Anycut no longer exists in the store -- try using "QuickShortcutMaker" instead.
This seems to happen when the radio gets switched off the correct frequency. To get it back (in CM10.1), you have to dial *#*#4636#*#* . As soon as you hit the last *, you will be taken to a "Testing" menu.
Click "Phone information" then make sure your phone number and IMEI look roughly correct. Then press the "Menu" softkey and then "Select radio band". For Verizon CDMA/LTE, this should be set on "Cellular (800-MHz)". Tap it, and the signal indicator in the menu bar should go back to normal. Also make sure the "Preferred network type" is set to "LTE/CDMA auto (PRL)". (This is also where you enable "GSM auto (PRL)" if you want to make it a WorldPhone.)
The other option in here is USA band (GSM-850/PCS-1900/WCDMA-850/WCDMA-PCS-1900), which I presume is for GSM compatibility since "Global" isn't an option in the "Mobile Networks" menu in CM10.1 (without a certain cherrypick).
Click to expand...
Click to collapse
Re-Necromancing Again....
Doesnt work for me. I had to push "call" after entering last star same error- no mobile network... Thought I would give it a try since I hit the wrong option on the screen. I was looking at the LTE options and got distracted... I did however get EFS Pro to Open IOTHiddenMenu. It is like the 2nd or 3rd tab, you will know it when you see it. Now to find out where (IOTHiddenMenu) is hiding on the actual phone. I did find
*#22745927
This shows an option to hide or show the "hidden menu".
I tried enable and a reboot, but no luck. Looks like EFS Pro is My Solution currently.
lair12 said:
I have had several instances where something I have done to my phone created a situation where I had no phone dialing capability. The error message when attempting to dial is "mobile network not available", and I'd get notice of "searching for network".
Restoring the com.android.phone app did not help with this. Neither did the suggestion seen elsewhere about entering ##72786# into the keypad to reprogram. The past solutions was to do a factory reset/wipe and then a restore of apps...pain in the a**.
Today I was able to work out another solution that has resolved this issue for me (at least this time)!.
1. Download Anycut app from http://www.freewarelovers.com/android/download/temp/1281882094_Any_Cut_1.0.apk, and open.
2. Make a new shortcut to activity named IOTHiddenMenu (the first one of three with the same name in the list)
3 Open this shortcut and select the following: TestMode Menu>UTMS>Debug Screen>Phone Control>Network Control>Band Selection>Automatic, then hit back twice to get to your main screen.
4. Download Phone Info ([email protected]) from Google Play, and open
5. Use Phone Info app to change preferred network type "“LTE/CDMA/EvDo" (click on Device Information and scroll down for first box to select and change).
If this works to solve your same issue, let me know in the thread.
And if it helps...give a thanks.
Click to expand...
Click to collapse
I'm going to give this a try. I've been having the same issue.
HMkX2 said:
I'm necro-ing this thread since it just happened to me and I found a fix on CM10.1 given the root cause. Also, Anycut no longer exists in the store -- try using "QuickShortcutMaker" instead.
This seems to happen when the radio gets switched off the correct frequency. To get it back (in CM10.1), you have to dial *#*#4636#*#* . As soon as you hit the last *, you will be taken to a "Testing" menu.
Click "Phone information" then make sure your phone number and IMEI look roughly correct. Then press the "Menu" softkey and then "Select radio band". For Verizon CDMA/LTE, this should be set on "Cellular (800-MHz)". Tap it, and the signal indicator in the menu bar should go back to normal. Also make sure the "Preferred network type" is set to "LTE/CDMA auto (PRL)". (This is also where you enable "GSM auto (PRL)" if you want to make it a WorldPhone.)
The other option in here is USA band (GSM-850/PCS-1900/WCDMA-850/WCDMA-PCS-1900), which I presume is for GSM compatibility since "Global" isn't an option in the "Mobile Networks" menu in CM10.1 (without a certain cherrypick).
Click to expand...
Click to collapse
THANK YOU!!!
this just saved my butt.
I found the solution
I have received Mobile Network Not Available Error on samsung galaxy s5. Below solution worked for me.
wiknix.com/how-to-fix-mobile-network-not-available-error
Jason383 said:
I found the solution
I have received Mobile Network Not Available Error on samsung galaxy s5. Below solution worked for me.
wiknix.com/how-to-fix-mobile-network-not-available-error
Click to expand...
Click to collapse
can u tell the steps the link isn't working anymore
Using this post as a guide
http://forum.xda-developers.com/showthread.php?p=41136607
I found a way to turn off LTE in the samsung modem software (dialer code *#0011#)
Steps:
Open dialer
Type *#0011#
Menu
Back
Menu
Key input
Type 1 in box
Ok
Menu
Back
1 UMTS
1 Debug
6 Phone Control
6 Network Lock
4 RAT_FREE_SUPPORTING_ON
menu
Back
Menu
Back
7 Network Control
2 Band Selection
From here choose your band. I recommend WCDMA/GSM Mode Only
I dont have LTE here so I cant confirm it works, but I know it does not stick on reboot.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
_Dennis_ said:
Using this post as a guide
http://forum.xda-developers.com/showthread.php?p=41136607
I found a way to turn off LTE in the samsung modem software (dialer code *#0011#)
Steps:
Open dialer
Type *#0011#
Menu
Back
Menu
Key input
Type 1 in box
Ok
Menu
Back
1 UMTS
1 Debug
6 Phone Control
6 Network Lock
4 RAT_FREE_SUPPORTING_ON
menu
Back
Menu
Back
7 Network Control
2 Band Selection
From here choose your band. I recommend WCDMA/GSM Mode Only
I dont have LTE here so I cant confirm it works, but I know it does not stick on reboot.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, this has already been discussed. All you have to do is dial *#*#4636*#*# and then choose device information and select your preferred network mode. They didn't rat lock this modem which is surprising.
MattMJB0188 said:
Yeah, this has already been discussed. All you have to do is dial *#*#4636*#*# and then choose device information and select your preferred network mode. They didn't rat lock this modem which is surprising.
Click to expand...
Click to collapse
They did as is evidence by dialing *#2263#
Also I have found *#*#4636*#*# not to stick after exiting the screen (could have been just me or a mistake I made)
Edit: seems my *#*#4636*#*# stuck until reboot. Nevermind then. I am still looking to see if I can get this crap to stick on reboot
The method I outlined sticks until reboot. And rat is unlocked until reboot. (Im looking at other options to write the modem so it sticks on reboot, but im blindly playing with it mostly)
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
I bought an Unlocked Canadian S6 recently, and it just won't let me connect to the LTE network.
Model Numer : SM-G920W8
Android Version : 5.0.2
Baseband : G920W8VLU1AOCG
Connecting to the LTE is not even an option. When I go in the Network Options, I get the choice between :
-WDCMA/GSM (auto connect)
- WDCMA only
- GSM only
I know for a fact that I am in the coverage zone, so no need to ask that silly question
I've tried different SIM cards, played in the options a bit, and factory reset the phone about 5 times now, yet nothing seems to work.
Also, when I try to do the update, it just reboots and gives me an Android logo and a failed Icon
I've only seen one other post like this from a carrier's support website, but no solutions were found.
**Update : For a reason, after a recovery, it will connect to the LTE for a bit or until next boot, then go back to what it is now.
First question, who did you buy the phone from? Second, Is it second hand? By default, Wind mobile does not allow the LTE option to be displayed in system settings as they as a carrier don't have LTE. It is blocked by the CSC setting for the carrier. As for other carriers It should leave you the option to connect in settings where you say it is not. If it is a Wind phone, You would need to change the CSC to enable the LTE selection. There is a method to force LTE even without option in settings, but I think it is removed in the latest firmware. Try dialing *#2263# in the dialer. It may bring you to menu that will allow you to select LTE. This is not a permanent method though as it will need to be done every boot. The other way, (If you are in fact a Wind/Mobilicity phone) is to enter dialer and enter *#272*IMEI# with IMEI being your devices unique code. If at all possible, take a full nand and Titanium Backup before doing this and be sure to transfer everything off the phone to a PC. This method wipes everything and I mean everything off the phone buy is a surefire way to enable LTE.
Yes, it was second hand. I didn't ask who was his carrier simply because it was unlocked.
I'll try it tomorrow, thanks for the information
Here is the menu you will see when you type the *#272*imei# code into your dialer. The codes are the carrier names. Mine which is GLW is Wind, BMC is Bell, RWC is Rogers, etc.
Maybe there is no LTE in your area...
roydok said:
Maybe there is no LTE in your area...
Click to expand...
Click to collapse
It would still be visible in the Settings/Mobile Networks/Network Mode menu which it is not. His problem is more than that.
BCSC said:
First question, who did you buy the phone from? Second, Is it second hand? By default, Wind mobile does not allow the LTE option to be displayed in system settings as they as a carrier don't have LTE. It is blocked by the CSC setting for the carrier. As for other carriers It should leave you the option to connect in settings where you say it is not. If it is a Wind phone, You would need to change the CSC to enable the LTE selection. There is a method to force LTE even without option in settings, but I think it is removed in the latest firmware. Try dialing *#2263# in the dialer. It may bring you to menu that will allow you to select LTE. This is not a permanent method though as it will need to be done every boot. The other way, (If you are in fact a Wind/Mobilicity phone) is to enter dialer and enter *#272*IMEI# with IMEI being your devices unique code. If at all possible, take a full nand and Titanium Backup before doing this and be sure to transfer everything off the phone to a PC. This method wipes everything and I mean everything off the phone buy is a surefire way to enable LTE.
Click to expand...
Click to collapse
Sweet! It works :good: Thanks man
Now, would you have any ideas on why the update won't work? I didn't get much into it yet, but I will soon.
I'm not sure why it wouldn't update, but now that you have changed the CSC you can download the update and flash with Odin. Pick your carrier and go to town. The guy running the following thread runs his own firmware host. He's got amazing DL speeds. Usually takes me 6 or so minutes to do the 1.6gb file. http://forum.xda-developers.com/showthread.php?t=3086387
I'm having the same issue.
Scurbs said:
Sweet! It works :good: Thanks man
Now, would you have any ideas on why the update won't work? I didn't get much into it yet, but I will soon.
Click to expand...
Click to collapse
Connected with someone selling a G920W8 version. LTE is disabled and the codes aren't working. Can you reaffirm which unlock code worked for you? I'm on Fido, what LTE network are you using?
hi BCSC
Thanks for the details. I searched complete net and read all articles but nothing set me up with the proper thing. i read your solution i dialled *#2263# and all i got is service mode and in that i went to band selection , LTE and the all ....... Yes and its showing LTE in mobile data. THanks so much.
But now another issue, network is showing perfect but no outgoing and incoming calls.
in incoming its showing busy and on outgoing its not connecting to another phone.
And, Lte is not showing in mobile networks, There only 3 options still are showing.
Mine is same Wind S6 but i had to use in India.
Let Me know
Thanks once again
Cheeerzzzzz
Varun
Picking LTE from the service mode will note make it visible from the settings menu. Its more of a workarpund instead of a way of permanently enabling it. As for the issue of no out/in calls, my best guess is that it could be due to which LTE bands are being used or are available in India. Unfortunatly I have no way to test that option. I only was successful in getting the Wind LTE option on Canadian carriers.
Sent from my SM-G935W8 using XDA-Developers mobile app