Hi,
in the old (and current I believe as well) Nokia phone - and most other pure mobile phones for that matter - you can dial a "p", typically by holding down the "*" for a while. The "p" makes the phone wait a little while before continuing to dial the rest of the number.
I need this feature!!!
I am using some prepaid phone cards for which this feature is really necessary.
So, anyone have a clue how to get a similar functionality on WM5? The "p" certainly does not work ...
Thanks in advance - Andy
if you're dialing live, you can dial only the connection number then open the keypad to dial the rest of the keycode manually. If you want to automate it, create a contact with the full number and you can enter in "p" there.
I have a contact for my voicemail which dials the voicemail and waits and the pin + #. this works great with voicecommand cause all I have to do is say "call voicemail" and it'll dial, enter in the password automatically and I don't have to touch the phone at all...
Interesting ... I did migrate all my number from my previous phone, where i had the "p" included in the number. The numbers also seemingly came up correctly on the PPC phone. However, when I tried to dial the number, it would not take the complete number with the "p" - I cannot remember exactly what it did, but it did not dial the whole thing. Thats why I thought/ hoped that there is another way. I guess, after what you are saying, I should give it another try ...
And yes, the application that you are describing is very similar to what I want to use. There is a prepaid international call provider, which has a local dial-in number and lets me call abroad for very little money. I call the local number - the service provider recognizes my account by the incoming phone number of my mobile - and then I dial the destination number. For the recognising part however, it is needed that the phone waits a little before it continues to dial the destination number.
Alright, alright .... works! Thx for the assurance! Tried it again and it just takes a lot longer - the pause is longer - than it used to be on my Nokia. Also, I do not hear the dialing tones after the "p" anymore, which probably put me off before.
Thanks! Thread closed
Try replacing the "p" with a "," . It will pause for a few seconds once the other side picks up the phone.
Hi all!
I've a Touch Cruise. When in phone I used to continue press number 1 and it dials to my voicemail service.
But one day this didn't work anymore. I continue press 1 and nothing, but it works with direct dials 2 to 9... any clues?
I've seted the voicemail number...
Best,
Juan
Go into the phone application -
choose menu/options...
select services tab at the bottom
select Voice Mail and Text Messages and press the Get Settings button
make sure the Voice Mail: box has the correct number for your network's voice mail access.
thanks gadgetgaz,
I've already done it, and also deleted the number and re entered it, but it still do not work... any other clue?
best,
Juan
Hello,
Just wondering if there was an easier way to do a 1-off internet call using the stock dialer and its Internet Calling features.
My options so far are to:
- Before trying to dial a number through my VOIP provider, work through the settings and turn on the Ask For Every Call option under Internet Dialing, dial the number, then turn it off after my call. Its important yo turn this off after as the internet/regular call dialogue comes up for calls through Bluetooth (!).
- Dial the number as usual, then pull up the keyboard with 'long press menu' and append @myvoipprovidersserver.com. Although this works, its a bit of a pain as the keyboard's auto-complete prevents the text from showing up in the dialer in real-time. Typos are really difficult to fix in this mode.
- For every number I want to dial through the internet, make a contact ahead of time with the email address formatted number as described above.
Is there some non obvious option closer to the actual dialer that lets me turn on/off internet dialing more quickly?
Please let me know,
- chris
I have a note edge from Verizon running on metro pcs, full mms, 4g lte and everything working (other than hotspot). When I press and hold 1, or dial *86 it says "call cannot be completed as dialed". But when I call my actual phone number it goes right to my new voicemail. But my password isn't being accepted. Metro has been helping me through it and they cannot figure out what the deal is. Anyways, is there a way to fix so I can dial 1 or *86??
Also unrelated, if you know anything about the hotspot i'd like to fix that as well.
Ok I resolved half the problem, for future reference I'll explain what to do
It turned out my dialer was not registering when I pressed the numbers during calls.
To fix just go to your dialer > settings > call > dtmf tones > and click long tones.
I still have an issue where pressing and holding 1 or dialing *86 still can't complete the call.
Sent from my SM-N915V using Tapatalk
In phone settings, under voicemail provider, the only option I have is Voice Mail, there's no Google Voice option like they're used to be. I uninstalled and reinstalled Google Voice, went through setup, still no option under voicemail provider. All voicemails open with the standard phone app and it dials into voicemail...
Does anyone know what is wrong? Thanks.
The stock Samsung dialer will never show Google Voice voicemails. You still have to either use the Google Voice app for that, or the Google Dialer. Set it up with conditional call forwarding with your carrier and you'll be set.
entropism said:
The stock Samsung dialer will never show Google Voice voicemails. You still have to either use the Google Voice app for that, or the Google Dialer. Set it up with conditional call forwarding with your carrier and you'll be set.
Click to expand...
Click to collapse
It has shown in the stock dialer in the past. I think maybe the new Google Voice update broke something? Because after going through proper setup after reinstalling Voice, I can't get it to work at all. Stock phone app notifies me of voicemails, clicking that takes me to my dialer where I have to call in to check voicemails, and that sucks... How do you set up conditional call forwarding, within the Voice app? I've never had to do that before, and I've been using Voice since the beginning.
Again, to be clear, I'm not looking for Google voicemails in the stock dialer, like in hangouts. Open phone app, more, settings, scroll down to Voicemail - Service Provider. Normally, Google Voice is listed there as an option (instead of using your stock voicemail, you can select to use Google Voice for voicemail). This is what's missing. So every time I get a voicemail, it goes to the one where you have to DIAL into your voicemail! No voicemails go to Google Voice.
OK, I will repeat, because I must not have explained it properly:
You must set up conditional call forwarding. This is step #1, and it absolutely must be done.
Your carrier: T-Mobile Change carrier
Note: This feature does not work with T-Mobile prepaid phone plans.
Follow these steps to have your mobile phone use Google Voice for voicemail instead of your carrier's voicemail. You can always go back to using your carrier's voicemail later if you want, by entering another code. Learn more here.
Enter the following exactly as written, as if you are dialing someone:
**004*1(your area code & number here)#
Press "Send" or "Call" on your phone to dial that number. When you see the confirmation message on your phone, you are done!
Got an error? Learn more
Click to expand...
Click to collapse
So if your number was (123) 456-7890, you would dial **004*11234567890#
Step 2 - Go into your dialer settings and look for your call forwarding settings. You should see options there.
For always forward, select off. For the other three, put in your Google voice number.
There. Done. Should work perfectly now. You can view your voicemails in the Google voice app.
entropism said:
OK, I will repeat, because I must not have explained it properly:
You must set up conditional call forwarding. This is step #1, and it absolutely must be done.
So if your number was (123) 456-7890, you would dial **004*11234567890#
Step 2 - Go into your dialer settings and look for your call forwarding settings. You should see options there.
For always forward, select off. For the other three, put in your Google voice number.
There. Done. Should work perfectly now. You can view your voicemails in the Google voice app.
Click to expand...
Click to collapse
I appreciate the help, I'll do this later today when I have a chance. I will say, though, that these steps are ABSOLUTELY not necessary for my T-Mobile Galaxy S7 Edge. For some reason, my fiance's regular S7 won't use Google Voice. So again, I'll try these steps later for her, thanks!
Hi,
I am having the same problem. I followed the instructions of dialing **004*1 (area code plus number) into my new T-Mobile Galaxy S7 phone and got: "the number you have dialed is not in service.
Have I followed the instructions incorrectly?
thanks for your help.
eJessica said:
Hi,
I am having the same problem. I followed the instructions of dialing **004*1 (area code plus number) into my new T-Mobile Galaxy S7 phone and got: "the number you have dialed is not in service.
Have I followed the instructions incorrectly?
thanks for your help.
Click to expand...
Click to collapse
Don't forget the pound sign after your phone number. This method did work for my fiance's S7. I never had to go through all this with my S7 Edge, though.
I have the same problem. I tried the code above and get this error:
Call forwarding
Connection Problem or invalid MMI code.
I had the same issue. Noticed recently I wasn't getting my Google Voice voicemails when my phone started telling me to install Verizon's visual voicemail to view my voicemails. Setting Google Voice also wasn't an option all of a sudden in the phone app, as it had been for years. I also noticed when I opened the new Voice app on my phone, it promoted me to pick a new Voice number, so the recent updates must have broken something.
Anyways, this is how I fixed it.
1) On a PC, go to voice.google.com (log in, if you aren't already)
2) Hit the menu button, scroll down, and select 'Legacy Google Voice' (should open in a new window)
3) In the new window, you should see your Voice number and then your cell number below that
4) You should see a link that says 'Activate Google voicemail on this phone'. Click that.
5) A box will open telling you to dial and call *71(Your Google Voice number)
6) You should be good to go, I placed a test call and it worked like it always had before except for an a couple extra rings before voicemail kicked in.
I also did the following to get it to go straight to voicemail after the normal number of rings...
Under your cell number, hit 'Edit' > 'Show Advanced Settings' > 'Forwarding Options' > Select 'Go straight to voicemail' > 'Save'
YMMV but I hope this helps someone. It certainly had me stumped for a couple days lol.
Call forwarding
I have a new SM j32 7T1 and it won't let me set call forwarding to anything but the pre-programmed MetroPCS voicemail everytime I put in my other phone number which I have two phones it says there's a network error which I don't think is an error I think it's the software will not allow me to put in a different number
Yeah, I got that "Connection Problem or invalid MMI code" code too after typing in the **004... code. However, I was able to successfully set up forwarding to my Google Voice by following the second step of instructions given. (Note: I recently bought this Galaxy S7 unlocked, previously T-Mobile carrier and need to set Google Voice as my voicemail - it was all set up on my previous phone, so I've done everything in Google Voice to set it up, and I had to of course install Google Voice on my new phone). Anyway, here's the instructions for setting up Google Voice as my voicemail on Galaxy S7:
(1) Tap phone icon to open phone app
(2) Tap 3-dot menu upper right corner
(3) Select: Settings
(4) Under CALL SETTINGS section select: More Settings
(5) Select: Call forwarding
(6) As the other person's instructions stated: leave the "Always forward" setting turned off, but tap the other 3 settings ("Forward when busy", etc.) and enter your Google number. Voila, all calls that you don't answer, for whatever reason, will go to your Google Voice where the caller will record a message, and you'll receive it via your Google Voice app.