I have a note 4 case. It's a nice thickness and protection.
but it's incompatible with the samsung qi charging.
Any recommendations for a note 4 case that is compatible with the samsung charging plate?
wait for reply~
There is an 11 page thread on this topic with several options.
http://forum.xda-developers.com/note-4/accessories/best-case-note-4-samsung-qi-charging-t2958395
I love my S view flip case.... Slips into a holster for another case perfectly... Does not offer as much protection as a full case.... But the Note 4 is so damn beautiful that I just bring myself to cover it up.
....love wireless charging! Been missing it since my old Palm Pre.
...sent from a phabulous HAL 9002, a Sprint Galaxy Note 4....
kevinw0312 said:
I have a note 4 case. It's a nice thickness and protection.
but it's incompatible with the samsung qi charging.
Any recommendations for a note 4 case that is compatible with the samsung charging plate?
wait for reply~
Click to expand...
Click to collapse
If you have not already purchased the Samsung wireless charging cover, go with this instead:
Qi-infinity™ Note 4 receiver with NFC Coil
This will fit under the original cover and allow you to use just about any case you want.
I have the Samsung wireless charging cover but switched to the Qi-infinity receiver and I can tell you that it works perfectly.
And now my case options are no longer limited.
I have the Spigen Slim Armor. works perfectly with my qi receiver
Sent from my SM-N910C using XDA Free mobile app
ozone777 said:
If you have not already purchased the Samsung wireless charging cover, go with this instead:
Qi-infinity™ Note 4 receiver with NFC Coil
This will fit under the original cover and allow you to use just about any case you want.
I have the Samsung wireless charging cover but switched to the Qi-infinity receiver and I can tell you that it works perfectly.
And now my case options are no longer limited.
Click to expand...
Click to collapse
may I know where is the thickest part of this receiver? The top near the contacts or the bottom part. I have the fonesalesman one and the thich part is the top and it pushes the back cover next to the heartbeat sensor... thanks
xdm9mm said:
may I know where is the thickest part of this receiver? The top near the contacts or the bottom part. I have the fonesalesman one and the thich part is the top and it pushes the back cover next to the heartbeat sensor... thanks
Click to expand...
Click to collapse
It's about the same as the Fonesalesman with a very slight bulge near the sensor.
Barely noticeable.
Related
I'm planning to buy the OEM S Charger Cover and I wanted to know if it increases the width of the phone and if yes, how much?. I ask this because I have a SPIGEN Neo Hybrid case and I want to know if I'll have any problems with it.
Thanks
arturox said:
I'm planning to buy the OEM S Charger Cover and I wanted to know if it increases the width of the phone and if yes, how much?. I ask this because I have a SPIGEN Neo Hybrid case and I want to know if I'll have any problems with it.
Thanks
Click to expand...
Click to collapse
Read for yourself by clicking HERE and http://www.amazon.com/dp/B00ITI24EK/ and looking for the measurements.
I see that it makes thicker and reading some other reviews I found that this case does no fit the Galaxy S5 with the Charging Cover
The wireless charging cover does add thickness to the phone, causing pretty much all S5 cases to not work with it. Here's an entire thread dedicated to the discussion of which cases fit with the wireless charging cover: Cases that are compatible with the wireless charging back
In short, the only case that's made specifically for use with the wireless charging cover at this point is this one from Diztronic. There are others that can be forced and/or modified to fit.
I bough this cases
http://www.aliexpress.com/snapshot/6101633608.html
http://www.amazon.com/gp/product/B00IJ1ON82/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
This fit very well on my S5+ http://www.amazon.com/gp/product/B00ITI24NG/ref=oh_aui_detailpage_o01_s01?ie=UTF8&psc=1
And Im wait for this case
http://www.amazon.com/gp/product/B00LLM9MQY/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
bsweetness said:
The wireless charging cover does add thickness to the phone, causing pretty much all S5 cases to not work with it. Here's an entire thread dedicated to the discussion of which cases fit with the wireless charging cover: Cases that are compatible with the wireless charging back
In short, the only case that's made specifically for use with the wireless charging cover at this point is this one from Diztronic. There are others that can be forced and/or modified to fit.
Click to expand...
Click to collapse
Thanks for your help, it was very clear information :good:
I ordered a s-view flip cover, I've also wanted to start using wireless charging.
can the s-view flip cover and qi wireless receiver work in one phone.? I see the s-view flip has its own back cover with chip in it. Would this effect the wireless charging if i install third party qi receiver?
anyone recommend me a good combo kit for wireless charging... (receiver+pad) i.e no heat, faster charging..?
also is there extended battery (same size as stock battery) that fits phone .(3000/3200mah) i can't seem to find any.
any help will be much appreciated.
also can the non-oem batteries be charged wirelessly.?
ministerjee said:
I ordered a s-view flip cover, I've also wanted to start using wireless charging.
can the s-view flip cover and qi wireless receiver work in one phone.? I see the s-view flip has its own back cover with chip in it. Would this effect the wireless charging if i install third party qi receiver?
anyone recommend me a good combo kit for wireless charging... (receiver+pad) i.e no heat, faster charging..?
also is there extended battery (same size as stock battery) that fits phone .(3000/3200mah) i can't seem to find any.
any help will be much appreciated.
Click to expand...
Click to collapse
Return the flip cover and get the s-view cover that already has the built in QI receiver. That way everything will work perfectly and you'll retain your ip67 rating.
GoBears said:
Return the flip cover and get the s-view cover that already has the built in QI receiver. That way everything will work perfectly and you'll retain your ip67 rating.
Click to expand...
Click to collapse
well, this is the one i want, i do not want to buy the s-view flip cover with built in charging, also its more expensive.. what qi receiver will work with such a cover.?
http://www.amazon.com/Samsung-Wallet-Flip-Cover-Galaxy/dp/B00ITI23GO/ref=cm_cr_pr_product_top
Ah I see. As long as you're not concerned with losing the ip67 rating of the device, any QI receiver for the S5 should fit under that cover. I'm using a cheapo receiver from ebay with no issues and it even works through my Otterbox wallet case which is pretty thick. Mine was less than 8 dollars.
Guys,
Here is the quick review of the Samsung Note 4 S-View Wireless Charging Case and the Fake China S-View Case and some other cases ( Wallets and TPU)
Question?
Just wanted to put my opinion in also mate. Gotta say this is the worst case I have owned on any phone. I bought this case as I wanted to try the flip case. Firstly only get this case if you NEED a flip case. It covers the LED so only way to know if you have notifications is to turn the phone on. The edges of this case a hard and narrow, therefore holding the phone for periods becomes very uncomfortable. It also will not protect the phone if dropped, the front flip becomes slightly flexible so you will damage the corners of the phone if you drop it. Also the screen gets incredibly smudged by fingerprints unlike the actual screen. Very hard to keep clean as it has two sides to it.
Hate flip cases anyways
OnlinePredator said:
Just wanted to put my opinion in also mate. Gotta say this is the worst case I have owned on any phone. I bought this case as I wanted to try the flip case. Firstly only get this case if you NEED a flip case. It covers the LED so only way to know if you have notifications is to turn the phone on. The edges of this case a hard and narrow, therefore holding the phone for periods becomes very uncomfortable. It also will not protect the phone if dropped, the front flip becomes slightly flexible so you will damage the corners of the phone if you drop it. Also the screen gets incredibly smudged by fingerprints unlike the actual screen. Very hard to keep clean as it has two sides to it.
Click to expand...
Click to collapse
I know, I don't like flip case. It just looks classy compare to the TPU case LOL
sweetboy02125 said:
I know, I don't like flip case. It just looks classy compare to the TPU case LOL
Click to expand...
Click to collapse
Yea it looks so good, and the feel of the materials is top notch! Nice wallpaper btw
OnlinePredator said:
Yea it looks so good, and the feel of the materials is top notch! Nice wallpaper btw
Click to expand...
Click to collapse
Yeah, The looks. I actually bought another S view (Gold color) without wireless charging
Verizonwireless.com has the charging case for $39.99 and the standard S-view for $19.99! Damn good prices considering the retail prices of these cases. Just ordered the charcoal one that has built-in charging. And no, you do not have to have an account to order. :good:
shojus said:
Verizonwireless.com has the charging case for $39.99 and the standard S-view for $19.99! Damn good prices considering the retail prices of these cases. Just ordered the charcoal one that has built-in charging. And no, you do not have to have an account to order. :good:
Click to expand...
Click to collapse
Yup that's where I ordered. The gold one looks better than I thought
Thanks for the review.
I have a fake chinese flip S-view cover for my Galaxy S4, and for the price it was simply great. the S-view worked fine, and quality was really decent.
One I'm considering buying a similar one for my new Note 4, and I think that the original OEM cases (both wireless and non-wireless ones) are simple overpriced!
I made some searches, and noticed that there are no fake chinese ones with the IC chip which enables the native S-view windows. They all have those custom badly functioning apps you have to download from chinese websites, just like you mentioned in the video.
Is there any fake flip case with a working native S-view cover??
Thanks!!
I grabbed one from Verizon for $19.99 (as mentioned above). I found the price acceptable, but wouldn't pay the full price for it. It's a nice case, but the window smudges are annoying (as others have mentioned).
Sent from my SM-N910V using XDA Premium HD app
KamaL said:
Thanks for the review.
I have a fake chinese flip S-view cover for my Galaxy S4, and for the price it was simply great. the S-view worked fine, and quality was really decent.
One I'm considering buying a similar one for my new Note 4, and I think that the original OEM cases (both wireless and non-wireless ones) are simple overpriced!
I made some searches, and noticed that there are no fake chinese ones with the IC chip which enables the native S-view windows. They all have those custom badly functioning apps you have to download from chinese websites, just like you mentioned in the video.
Is there any fake flip case with a working native S-view cover??
Thanks!!
Click to expand...
Click to collapse
$20 is not that bad for a real S view case from Verizon. I don't think any fake one works same as real Sview because of the small magnet/chip insert cost more.
Nice review ... This is mine..
http://gavinsgadgets.com/2015/03/30/samsung-galaxy-note-4-official-s-charger-qi-wireless-kit-review/
Besides those cases above in my review, I bought 4 more cases
1- a 2 layer wallet case
2 - Gold Samsung S view case (real)
3 - a case with stand in the back (Garrco case)
4 - another simple backup case (using now ) and love it
Sent from my SAMSUNG-SM-N910A using Tapatalk
Love my S view case.
I find it very useful I have qi wireless chargers on the desk, nightstand and car... So convenient.
And the Note 4 is so damn good looking, I just can't cover it all up with a big, bulky (ugly) case.
To each their own...
...sent from a phabulous HAL 9002, a Sprint Galaxy Note 4....
todd.kennelly said:
Love my S view case.
I find it very useful I have qi wireless chargers on the desk, nightstand and car... So convenient.
And the Note 4 is so damn good looking, I just can't cover it all up with a big, bulky (ugly) case.
To each their own...
...sent from a phabulous HAL 9002, a Sprint Galaxy Note 4....
Click to expand...
Click to collapse
I don't like flip and wallet cases no matter how many I bought ( use for max 2 days). Always come back to TPU case for the convenience
Sent from the Galaxy Note 4 - Have a nice day.
i got that unicorn beetle case (i think that's the name). it "fits" with the glass screen protector and the wireless charging back (i still have to order a qi charger for my nightstand, office desk, and car, but im still looking for a case that will fit it perfectly. i really wish samsung shipped the phones with the wireless back, or at least make it the same size. is this a mythological case that i'm looking for? will any manufacturers step up to the plate? was this an issue with the note 3? i hope i can find the perfect case with a holster!
Samsung Galaxy Note 4 wireless QI Charging Modifi…: http://youtu.be/2-FEBpDieOg
Sent from my SM-N910T using Tapatalk 2
I use a Tech21 Classic Tactical case. It stretches around to fit the qi back. Tight fit but seems to hold up well.
has anybody tried tris combo? i got a 3rd part Qi receiver but wont charge with the charger when the UAG case on. without the thickness of the case it will charge. will the original samsung qi back case charge with the uag on?
thanks!
ans3288 said:
has anybody tried tris combo? i got a 3rd part Qi receiver but wont charge with the charger when the UAG case on. without the thickness of the case it will charge. will the original samsung qi back case charge with the uag on?
thanks!
Click to expand...
Click to collapse
Have not read the threads?
Yes the OEM Qi charging works fine as does NFC with UAG case.
NO.. the UAG case does not fit with the wireless Qi back. So either take off the back of the Qi wireless plate, or take the Qi wireless receiver out of the OEM note edge wireless back plate, and place it inside the OEM non-wireless back plate, and fit in the UAG, and it will both fit and work.
its interesting y my Qi receiver was nt working with UAG installed, will test furtherthanks for the reply! any idea wat are to extra pins for in the orig samsung back cover?,
drexd said:
Have not read the threads?
Yes the OEM Qi charging works fine as does NFC with UAG case.
NO.. the UAG case does not fit with the wireless Qi back. So either take off the back of the Qi wireless plate, or take the Qi wireless receiver out of the OEM note edge wireless back plate, and place it inside the OEM non-wireless back plate, and fit in the UAG, and it will both fit and work.
Click to expand...
Click to collapse
Thanks! I carefully popped the plastic piece off the QI Edge back. I then used a thin blade to cut the QI receiver from the plastic and lined it up and popped the original back on and it charges wirelessly and now with the UAG case.