has anybody tried tris combo? i got a 3rd part Qi receiver but wont charge with the charger when the UAG case on. without the thickness of the case it will charge. will the original samsung qi back case charge with the uag on?
thanks!
ans3288 said:
has anybody tried tris combo? i got a 3rd part Qi receiver but wont charge with the charger when the UAG case on. without the thickness of the case it will charge. will the original samsung qi back case charge with the uag on?
thanks!
Click to expand...
Click to collapse
Have not read the threads?
Yes the OEM Qi charging works fine as does NFC with UAG case.
NO.. the UAG case does not fit with the wireless Qi back. So either take off the back of the Qi wireless plate, or take the Qi wireless receiver out of the OEM note edge wireless back plate, and place it inside the OEM non-wireless back plate, and fit in the UAG, and it will both fit and work.
its interesting y my Qi receiver was nt working with UAG installed, will test furtherthanks for the reply! any idea wat are to extra pins for in the orig samsung back cover?,
drexd said:
Have not read the threads?
Yes the OEM Qi charging works fine as does NFC with UAG case.
NO.. the UAG case does not fit with the wireless Qi back. So either take off the back of the Qi wireless plate, or take the Qi wireless receiver out of the OEM note edge wireless back plate, and place it inside the OEM non-wireless back plate, and fit in the UAG, and it will both fit and work.
Click to expand...
Click to collapse
Thanks! I carefully popped the plastic piece off the QI Edge back. I then used a thin blade to cut the QI receiver from the plastic and lined it up and popped the original back on and it charges wirelessly and now with the UAG case.
Related
Just wondering if anyone has the wireless charging back and is using it with a case? I just wanted to know if cases still fit with the wireless charging back cover because I heard the cover makes the phone fatter. Also does the wireless charging work with a case on?
I'm currently using the Spiegen Neo Hybrid and considering getting the wireless charging back and plate so I don't have to open the stupid flap that's prone to break.
C2Q said:
Just wondering if anyone has the wireless charging back and is using it with a case? I just wanted to know if cases still fit with the wireless charging back cover because I heard the cover makes the phone fatter. Also does the wireless charging work with a case on?
I'm currently using the Spiegen Neo Hybrid and considering getting the wireless charging back and plate so I don't have to open the stupid flap that's prone to break.
Click to expand...
Click to collapse
Search is your friend...
Check out this thread: Cases that are compatible with the wireless charging back
As mentioned, a thread already exists on this subject
Thread closed
I ordered a s-view flip cover, I've also wanted to start using wireless charging.
can the s-view flip cover and qi wireless receiver work in one phone.? I see the s-view flip has its own back cover with chip in it. Would this effect the wireless charging if i install third party qi receiver?
anyone recommend me a good combo kit for wireless charging... (receiver+pad) i.e no heat, faster charging..?
also is there extended battery (same size as stock battery) that fits phone .(3000/3200mah) i can't seem to find any.
any help will be much appreciated.
also can the non-oem batteries be charged wirelessly.?
ministerjee said:
I ordered a s-view flip cover, I've also wanted to start using wireless charging.
can the s-view flip cover and qi wireless receiver work in one phone.? I see the s-view flip has its own back cover with chip in it. Would this effect the wireless charging if i install third party qi receiver?
anyone recommend me a good combo kit for wireless charging... (receiver+pad) i.e no heat, faster charging..?
also is there extended battery (same size as stock battery) that fits phone .(3000/3200mah) i can't seem to find any.
any help will be much appreciated.
Click to expand...
Click to collapse
Return the flip cover and get the s-view cover that already has the built in QI receiver. That way everything will work perfectly and you'll retain your ip67 rating.
GoBears said:
Return the flip cover and get the s-view cover that already has the built in QI receiver. That way everything will work perfectly and you'll retain your ip67 rating.
Click to expand...
Click to collapse
well, this is the one i want, i do not want to buy the s-view flip cover with built in charging, also its more expensive.. what qi receiver will work with such a cover.?
http://www.amazon.com/Samsung-Wallet-Flip-Cover-Galaxy/dp/B00ITI23GO/ref=cm_cr_pr_product_top
Ah I see. As long as you're not concerned with losing the ip67 rating of the device, any QI receiver for the S5 should fit under that cover. I'm using a cheapo receiver from ebay with no issues and it even works through my Otterbox wallet case which is pretty thick. Mine was less than 8 dollars.
The official wireless Qi charging door adds a few millimeters to the thickness. I had a Body Glove case over the phone but now it's a little tight and the case bows down the edge site.
Does anyone else have the wireless Qi door and case? If so, what case are you using and how well does it fit?
I found a partial answer here: http://forum.xda-developers.com/note-edge/accessories/note-edge-flip-wallet-qi-wireless-t2950494
Following the instructions in that thread I was able to crack open the Samsung OEM Qi Charging Door, pull out the Qi charging pad, and "transplant" it into the original plastic battery door. It created some raised spots on the back but the door clips shut all the way around and you can barely tell there are any raised spots once you put a case around the phone.
My current case is a Body Glove Satin Series. With this modification the case fits pretty good with just a slight wobble when laying it flat.
Did anyone find an answer to this without doing the mod?
i got that unicorn beetle case (i think that's the name). it "fits" with the glass screen protector and the wireless charging back (i still have to order a qi charger for my nightstand, office desk, and car, but im still looking for a case that will fit it perfectly. i really wish samsung shipped the phones with the wireless back, or at least make it the same size. is this a mythological case that i'm looking for? will any manufacturers step up to the plate? was this an issue with the note 3? i hope i can find the perfect case with a holster!
Samsung Galaxy Note 4 wireless QI Charging Modifi…: http://youtu.be/2-FEBpDieOg
Sent from my SM-N910T using Tapatalk 2
I use a Tech21 Classic Tactical case. It stretches around to fit the qi back. Tight fit but seems to hold up well.
I have a note 4 case. It's a nice thickness and protection.
but it's incompatible with the samsung qi charging.
Any recommendations for a note 4 case that is compatible with the samsung charging plate?
wait for reply~
There is an 11 page thread on this topic with several options.
http://forum.xda-developers.com/note-4/accessories/best-case-note-4-samsung-qi-charging-t2958395
I love my S view flip case.... Slips into a holster for another case perfectly... Does not offer as much protection as a full case.... But the Note 4 is so damn beautiful that I just bring myself to cover it up.
....love wireless charging! Been missing it since my old Palm Pre.
...sent from a phabulous HAL 9002, a Sprint Galaxy Note 4....
kevinw0312 said:
I have a note 4 case. It's a nice thickness and protection.
but it's incompatible with the samsung qi charging.
Any recommendations for a note 4 case that is compatible with the samsung charging plate?
wait for reply~
Click to expand...
Click to collapse
If you have not already purchased the Samsung wireless charging cover, go with this instead:
Qi-infinity™ Note 4 receiver with NFC Coil
This will fit under the original cover and allow you to use just about any case you want.
I have the Samsung wireless charging cover but switched to the Qi-infinity receiver and I can tell you that it works perfectly.
And now my case options are no longer limited.
I have the Spigen Slim Armor. works perfectly with my qi receiver
Sent from my SM-N910C using XDA Free mobile app
ozone777 said:
If you have not already purchased the Samsung wireless charging cover, go with this instead:
Qi-infinity™ Note 4 receiver with NFC Coil
This will fit under the original cover and allow you to use just about any case you want.
I have the Samsung wireless charging cover but switched to the Qi-infinity receiver and I can tell you that it works perfectly.
And now my case options are no longer limited.
Click to expand...
Click to collapse
may I know where is the thickest part of this receiver? The top near the contacts or the bottom part. I have the fonesalesman one and the thich part is the top and it pushes the back cover next to the heartbeat sensor... thanks
xdm9mm said:
may I know where is the thickest part of this receiver? The top near the contacts or the bottom part. I have the fonesalesman one and the thich part is the top and it pushes the back cover next to the heartbeat sensor... thanks
Click to expand...
Click to collapse
It's about the same as the Fonesalesman with a very slight bulge near the sensor.
Barely noticeable.