cloud - General Topics

Tutorial download cusrom or download files through the cloud
Download cusrom or big files that stuck or fail in the end it is very draining menit2 quota, well to avoid similar incidents recurring, a few tips from ane that the file be safe and do not need was2 ...
Hehe personal experience as well,: XD
• Ok, immediately wrote cekidot
Terms:
• UC or UC Browser Mini
who have not got the download in the new version lets UCBROWSER v96.0.37 / updates can be monitored through playstore
link:
Steps:
1. Click the link file that will be downloaded, a popup will appear automatically download (manual) or unduh_cloud
• Then select the downloaded cloud, it will be brought to the cloud storage menu.
2. agan just select menu save to UDisk
3. The storage phase will run, wait until the process is complete 100%
(This Ditahap agan not to worry, because the storage process will not take bandwitch or internet quota)
4. Complete Storage √
5. The final step, open and click the file that has been saved, there will be a download menu, this menu now that we select to start the download process.
(Make checks quotas, because the process is certainly as the download process in general alias using quotas) # LoL / lol
6. Wait for the process is complete.
• the downloaded file is in the sdcard difolder UCDownload.
tutors picture:
•• May be useful
•• Enjoy to Download Next Come
• gan his coffee #LoL

Related

Restore your spectrum 2 back to clean factory stock

RESTORE YOUR SPECTRUM 2 BACK TO CLEAN FACTORY STOCK
AFTER SECURITY ERROR OR OTHER ISSUES​
WARNING
• I do not take any responsibility for what you do to your device. If you decide to do this, you do so at your own risk.
​ Read and understand the whole guide first before actually performing the instructions.
• This is how to fully return your phone back to stock. It will wipe all data on your device so >Back Up Anything You Want To Save.
​ This will take some time to do, not a 5 minute job.
REQUIREMENTS
• Downloaded the >KP500 Utility Tool and unzipp to your desktop.
• Download firmware >VS93010E_05.S10E_05.P58015.R5 wait for it to finish downloading (or the below firmware if this doesn't work)
See "This Post" Before Using this Latest JB Update (If the above firmware doesn't work or you want to try the Latest Jelly Bean Firmware Update >VS93021B_05.S21B_05.P58017.R5 be sure to to change the cab input path below to match).
• Next open and put the firmware in the "LG_Tools" folder on your desktop.
• Download >Driver Package and LG Support Tool and install onto your computer.
• Backup all personal data on your phone to make sure you have a copy of your personal data
​ e.g., Contacts, SMS, MMS, Internet Settings, Wi-Fi Passwords Apps, and the like.
​ For backup tips, check this guide on >How to backup your spectrum 2 device.
INSTRUCTIONS
• Make sure to charge your battery to 100%
• Install the driver package and LG Support Tool.
• Next go into your Windows "Device Manager" on your computer
​ Disable the device under Modems >LGE AndroidNet for VZW USB Modem.
• Remove your battery and remove your memory card.
• Reboot your phone into "Download Mode".
​ Re-insert your battery [not your memory card] and replace the back plate.
​ Hold down vol up + vol down and Plug in the USB cable while holding both buttons.
​ When the download screen come's up on your phone, you can let go of the vol controls.
​ Now open the "LG_Tools" file on your desktop and follow the directions bellow.
1. Run your "KP500-Utils-EN.exe" as administrator.
2. Choose: I "Flash with assistance (file .cab)" and press enter.
3. Next it will show: "Phone Model (KP500)" enter VS930, and press enter.
4. Input the full path to your cab file including .CAB at the end (i.e. C:\Users\YOUR COMPUTERS NAME\Desktop\LG_Tools\VS93010E_05.S10E_05.P58015.R5.cab) and press enter.
5. Now Input the full file name of your cab without the Cab (i.e. VS93010E_05.S10E_05.P58015.R5) and press enter.
• You will see the LG update tool pop up and a indicator bar will start
• Then it will stop and you will see a pop up that says "Restart" click on
• Now It will go threw extracting the cab file and then extracting a .bin file
• Wait for your phone to finish flashing and let it reboot on its own
• This will take some time for It to complete
ONCE THIS IS DONE
• You should see a normal boot process and now use your phone as if it was brand new.
COPY THE LINK BELOW FOR ALL THE DOWNLOADS AND MORE INFORMATION TO THIS POST
rootzwiki.com/topic/36201-so-bricked/page__st__10#entry1043166

[ROOT] [MOD] THL W9 - Rooting Guide - Official ROM customization, fixes, mods etc.

This is the first guide and the first rooting EVER for THL W9 based on MTK6589T chipset by MEDIATEK.
Also this will guide you to fully customize and apply fixes and mods to the official THL W9 ROM.
What you need:
a. PC or laptop in good working condition.
b. USB cable for THL W9 (micro usb) in perfect condition.
c. Some knowledge on ADB and Rom Customization.
d. Patience.
ATTENTION: THIS WILL VOID YOUR WARRANTY AND YOU PROCEED WITH YOUR OWN RISK.
THIS CAN PERMANENTLY DESTROY YOUR DEVICE. I'M NOT RESPONSIBLE FOR ANY DAMAGE OR LOSS OF DATA.
SECTION A - IF YOU HAVE THE INTERNATIONAL ROM AND WANT TO ROOT.
1. Turn W9 off , wait for the vibration. Take off the battery, wait 5 seconds and put it back.
Plug usb cable to pc and install usb drivers when asked. (You might need to plug-unplug multiple times to get the driver right) - Driver on MEDIATEK official site or elsewhere.
You might also need ADB working (not sure about this). follow this: http://forum.xda-developers.com/showthread.php?t=2272266
2. Download (from internet) and run eroot v1.3.4. Link: http://www.runamux.net/search/view/file/9fLmV0ty/ERoot-1014.html
Boot W9 to Android and enable USB Debugging. Run eroot (with admin privileges) and IF everything is ok you have to see Thl W9 recognized by eroot.
Click Root. You have to get 4 ticks. Unplug usb, close eroot.
3. Check root - install superuser - busybox.
You can follow this using adb commands: http://forum.xda-developers.com/showthread.php?t=2272266
OR
Enable usb storage mode and copy to SD card the following APK files:
BusyBoxPro v9.9.
SuperSU v1.32
Root Explorer v3.1.1
Root Checker Pro v.1.2.8
You can find those on internet or xda forums. Install everything and run everything.
On root check pro you have to see green text when you press verify Root and BusyBox.
On root explorer you can access root and make it ro->rw (read only, read write).
ROOT IS DONE!
SECTION B - IF YOU HAVE THE OFFICIAL CHINESE ROM WITH NO GOOGLE APPS OR ACCIDENTLY INSTALL THE official CHINESE ROM AND WANT TO GO BACK.
1. Be sure that your rom is in good working condition with no errors.
Otherwise maybe is better to flash official rom again. Language only CN,EN.
Official ROM with flash tool here: http://www.needrom.com/wp-content/uploads/2013/07/W9_20130702-FH16.rar
Source site: http://www.needrom.com/mobile/thl-w9/
If you have the international ROM and want to root, please go to section A.
2. PERFORM TASK 1 ON SECTION A.
3. DOWNLOAD SP FLASHTOOL OR BIRDA FLASH TOOL and official Rom THL W9. BirdA Flash tool included in rar file.
4. Select proper scatter file (specific for official chinese rom) and click download button on flash tool.
Turn Off and remove battery from W9. Wait 5 seconds and put back. Plug USB cable.
Flash tool should detect W9 and start to load... The process will end with a green circle small window. Unplug USB and turn W9 ON.
5. When boot go to settings and language & input. First option is language, switch to English. (Go with symbols because on first boot you got chinese)
6. Perform TASK 2 & 3 of Section A to ROOT W9.
7. Now you have to remove chinese apps. There is no specific way to do it, but the main idea is here:
a) uninstall everything you can from settings->apps.
b) disable everything you can from settings->apps->all. (Be careful to recognize what is chinese and not android's processes)
c) use Root app Delete application to remove unwanted chinese apps. (this is useful when attached to Android system) found on internet or xda forum.
8. Make it Google.
Extract apk files from gapps.zip. download here: http://goo.im/devs/UniqueDroid/gapps/gapps-4.2.1
I notice that google tts conflicting with existing. dont copy this.
Copy the files to your sd card,
Use Root Explorer installed on step 6, and move this apk files from sd card to root/system/app.
Restart. This will install all Google Files and you have to be able to google login, with google services etc.
9. Install extra apk files:
Playstore 4.3.11, maps7.0.0, googletts3.1, googlesearch 2.1.12.516912, youtube4.2.16 from APK files.
Download from internet or xda forums.
If you want to remove THL Stock lockscreen, you can use Holo Locker from play store.
If you ever had the error text to speech has stopped, then go to settings, language and input and under Text to speech select PICO TTS.
GPS FIX
------------
This is for anyone having GPS Issues. Recommended for everyone
Before you start the procedure you need:
1. You HAVE TO BE ROOTED on any ROM (section A)
2. Get Mobileuncle Tools from play store
3. Get GPS Test from play store
4. Get Root explorer from play store (you might have it from previous steps)
Procedure should be done outdoors:
1. Turn GPS off on your phone.
2. Open Root Explorer and find the mtkgps.dat file in /data or /data/misc
3. Delete mtkgps.dat
4. Reboot phone
5. Open Mobileuncle Tools
6. Tap on 'Engineer Mode'
7. Tap on 'Engineer Mode (MTK)'
8. Scroll across to 'Location'
9. Tap on 'Location Based Service'
10. Tap on 'AGPS' and then make sure 'A-GPS On/Off' is checked
11. Tap on 'EPO' and then make sure 'Enable EPO' is checked
12. Swipe down (notification bar) and turn GPS on
13. Hit back and then tap 'YGPS'
14. Wait until you get position lock (mine took about 5 seconds).
15. This process should create a new mtkgps.dat file.
16. Hit home button and open GPS Test.
17. You should get a position lock reasonably quickly.
Sound FiX (using Mobileuncle Tools)
Low volume etc... http://forum.xda-developers.com/showthread.php?p=40646178
mic fix: http://iists.it/saturs/how-fix-low-mic-volume-issue-cubot-gt99
Further customize:
Gravity Box from Xposed Module: http://forum.xda-developers.com/showthread.php?t=2316070
Credits to : C3C076
Exposed Framework master thread: http://forum.xda-developers.com/showthread.php?t=1574401
Good Luck!
Please post any questions or problems as replies here so we can help also other people and share the tips.

[ROM][KITKAT 4.4.2][unlocked BL only][CAYONOGENMOD11] by:Mr.Stenly

Hi guys i want to share my own version of CM11 and i post this here becouse i cant post to android deveopment page!
[Bugs]
Only bluetooth doesnt workig
[Description]
This is my own version of CM11 work smoothly and its light rom its small when you install it size is 500mb.
I fix many bugs like a:
Storage [Now shows 4gb] but you must to be with my kernel thunderzap dont work
Multitouch
GPS
Graphicx when you rotate screen
and many more
i make build.prop modyfications and now
You can download ALL apps on Google play store
I tryed many game like a Modern Combat [3,4], GTA Vice City, GTA San Andreas, Fifa 14 and all thease games run smoothly and phone dont goes hot or games not crashed
[instructions]
PRO:
1) THE USER INTERFACE IS VERY FAST,AND IT LOOKS VERY GOOD,IT HAS NICE ANIMATIONS AND EVERYTHING RELATED TO THIS.
2)THE CAMERA IS IMPOROVED.YOU NEED TO REDUCE THE EXPOSURE A BIT IN ORDER TO GET FULL SMOOTHNESS BUT THAT'S IT.IT JUST HAS MORE DETAIL THAN 4.2.2.
3)NO BLOATWARES,NOTHING.YOU CHOOSE WHAT TO INSTALL,HOW TO PERSONALIZE YOUR PHONE.
4)ALL THE CM11 FEATURES AND CUSTOMIZATIONS.
5)IT'S JUST KITAT,YOU WILL SIMPLY LOVE IT.
CONS:
1) INTERNAL STORAGE DOESN'T FULLY WORK.WHAT DOES IT MEAN?
- IF YOU INSTALL AN APP,A GAME,ANYTHING FROM PLAYSTORE,YOU CAN'T MOVE IT TO INTERNAL STORAGE.THIS OPTIONS JUST ISN'T THERE.
-THE INTERNAL STORAGE ISN'T SHOWN IN SETTINGS->STORAGE
-YOU CAN ACCESS THE INTERNAL STORAGE WITH A FILES BROWSER(STOCK ONE FROM CM11 IS GOOD).
-IF YOU WANT A BIG GAME,YOU CAN PUT IT'S CACHE IN INTERNAL STORAGE(BY CONNECTING THE PHONE TO PC) AND THEN INSTALL THE APK.IT WILL WORK.THIS WON'T WORK IF YOU PUT THE GAME'S CACHE ON SD CARD.
-ABOUT 300 MB WILL BE TAKEN BY SYSTEM(I DON'T KNOW WHY,HOW,BUT THIS HAPPENED TO ME).ANYWAY,IT'S NOT AN ISSUE
2)BLUETOOTH DOESN'T WORK.THAT'S JUST IT,NO WORKAROUND AT THIS MOMENT.I RARELY USE BT SO THIS ISN'T AN ISSUE FOR ME.I USE INTERNET TO SHARE FILES(WHATSAPP/FB/ETC)
3)IN CAMERA,YOU CAN'T SAVE THE PHOTOS/VIDEOS ON SD-CARD.THE CAMERA WILL FC.HOWEVER,AFTER THE DCIM FOLDER GETS LARGER,YOU CAN MOVE THEM MANUALLY TO SD CARD BY CONNECTING YOUR PHONE TO THE PC.
[HOW TO INSTALL]
I WILL RECOMMEND A CLEAR INSTALL(FULL FORMAT) AND THIS IS HOW MY TUTORIAL WILL BE BUILD.
0)Reflash your firmware.I did it this way to make sure I get rid off all bugs(optional).
ALSO MAKE SURE YOUR BOOTLOADER IS UNLOCKED.
0.5)[edit] Format system before step 8 ! [you'll find this option in recovery]
1)Back-up contacts,apps,etc and save everything you need from sd card(optional ~ if you want to format it too) and from internal storage and format them.
2)Reboot your phone,connect it to pc and in internal storage create a folder named " 0 " (without quotes) and move all folders and files there(the one that Android automatically creates).This will be your new internal storage.Whatever is outside that folder (0) it won't be accessible after flashing CM11.
3)DOWNLOAD ALL THOSE FILES: https://www.mediafire.com/?tdqp9embzum4ecd,y25w433x4f562eq,llv22wd5200nc39,yhh4h41tdsdl58w
4)MOVE ALL OF THEM(EXCEPT CM11.RAR) IN THE " 0 " FOLDER.
5)EXTRACT CM11.RAR ON DESKTOP.YOU SHOULD GET 2 FILES ( SYSTEM.IMG AND BOOT.IMG )
6)DOWNLOAD AND INSTALL FLASHTOOL: http://www.flashtool.net/download.php
7)INSTALL FLASHTOOL DRIVERS.GO TO C:/FLASHTOOL/DRIVERS AND INSTALL THE DRIVER.DURING THE PROCESS,TICK WHEN ASKED: FLASHMODE DRIVERS / FASTBOOT MODE DRIVERS / COMMON DRIVERS FOR TAOSHAN PLATFORM AND PROCEED.IF YOU'RE ON WINDOWS 8 CHECK THIS OUT: http://theconfuzedsourcecode.wordpr...install-flashtool-drivers-on-windows-8-64bit/
8)TURN OFF YOUR PHONE,REMOVE BATTERY AND REINSERT IT.START FLASHTOOL ON PC,KEEP VOLUME UP PRESSED WHILE CONNECTING YOUR PHONE TO PC VIA USB.IF EVERYTHING IS GOOD THE PROGRAM SHOULD SAY "DEVICE CONNECTED IN FASTBOOT MODE" AND YOU CAN RELEASE THE VOLUME UP BUTTON.IF NOT,CHECK OUT THE DRIVERS AGAIN.
9)IN THE TOP LEFT CORNER YOU'LL SEE AN ICON (LIKE A THUNDER ~ FLASHTOOL ICON).CLICK IT AND SELECT FASTBOOT MODE.A NEW WINDOW WILL APPEAR
10) CLICK ON " SELECT SYSTEM TO FLASH" , GO TO SYSTEM.IMG AND SELCT IT( WHERE YOU EXTRACTED THE CM11 RAR FILE ~ IF YOU DID AS I SAID IT SHOULD BE ON DESKTOP) AND WAIT ABOUT 2-3 MINUTES.THE PROGRAM DOESN'T CLEARLY SAY WHEN IT'S FINISHED( IT WILL WRITE " CHECK THE LOGS BEFORE REBOOTING TO SYSTEM " ) . AFTER 2-3 MINUTES CLICK ON "SELECT KERNEL TO FLASH " AND SELECT BOOT.IMG.IT WILL TAKE 5 SECONDS OR SO.
11)AFTER THIS CLICK "REBOOT TO SYSTEM" AND WAIT FOR PHONE TO BOOT UP.YOU CAN DISCONNECT THE USB AND CLOSE FLASHTOOL.
12)OPTIMIZE THE PHONE A LITTLE.IF YOU WANT TO DISABLE SYNC BEFORE FLASHING GAPPS(I DID THIS BECAUSE I DON'T NEED SYNC ~ I RECOMMEND TO DISABLE SYNC AND MANUALLY SYNC ANYTHING YOU NEED LATER) GO TO SETTINGS-> INTERFACE - > QUICK SETTINGS PANEL -> TILES AND LAYOUT -> TAP THE " ADD + " BUTTON AND SELECT SYNC.THEN DISABLE IT FROM NOTIFICATION BAR (TAP IT).AFTER THIS REBOOT AND LEAVE THE PHONE ASIDE FOR A WHILE.
13)DOWNLOAD GAPPS.CHOSE WHATEVER YOU NEED.I CHOOSED MICRO MODULAR PACKAGE AS I DON'T USE GOOGLE SERVICES.I RECOMMEND YOU TO DO THE SAME IF YOU MORE FREE RAM.HERE'S THE LINK TO CHOOSE: http://forum.xda-developers.com/showthread.php?t=2397942
14)CONNECT YOUR PHONE TO PC ( FIRSTLY GO TO STORAGE -> TAP ON OPTIONS AND SELECT MTP MODE) AND MOVE PA_GAPPS ZIP TO INTERNAL STORAGE/0 (IN THE FOLDER WHERE graphical_glitches_fix / kitkat modules / UPDATE-SuperSU-v1.94 zips are ).
15)DISCONNECT YOUR PHONE FROM PC,PRESS POWER BUTTON AND REBOOT.WHEN THE LED LIGHTS UP AND SONY'S LOGO PRESS VOLUME DOWN.THIS WILL GET YOU IN RECOVERY.DO A FACTORY RESET AND REBOOT.
16)ENTER RECOVERY AGAIN -> GO TO INSTALL ZIP -> FIND THE " 0 " FOLDER (IT'S IN SDCARD FOLDER) AND SELECT graphical_glitches_fix AND FLASH IT.REBOOT.DO THIS FOR THE REST OF THE ZIPS IN THIS ORDER:KitKat modules by stenly , UPDATE-SuperSU-v1.94 , pa_gapps-modular-micro-4.4.2-20140412-signed .AFTER FLASHING THE LAST ZIP TAP WIPE CACHE/DALVIK CACHE AND REBOOT.
AGAIN,I RECOMMEND A REBOOT BETWEEN FLASHING ZIPS EVEN IF TWRP GIVES YOU TO OPTIONS TO SELECT UP TO 10 ZIPS TO FLASH THEM ALL AT A TIME.
17)AFTER THE PHONE BOOTS UP,PLAY A LITTLE WITH IT AND DO A FINAL SIMPLE REBOOT.
18)GO TO CAMERA AND TAKE A PHOTO.IT'S VERY IMPORTANT,THIS WILL GET INTERNAL STORAGE TO BE SEEN BY THE FILE MANAGER.AFTER THIS YOU CAN CHECK INTERNAL STORAGE(IT'S CALLED " 0 ") WITH THE FILE MANAGER.
19)IF YOU GET CAMERA FORCE CLOSE DO A REBOOT.I GOT FC FIRST TIME AND AFTER A REBOOT SINCE YESTERDAY I HAVEN'T EXPERIENCED ANY FC.DO NOT CHOOSE THE CAMERA TO SAVE PHOTOS ON SD CARD.IF YOU HOWEVER DO THIS,GO TO SETTINGS-> APPS -> ALL APPS AND WIPE CACHE FOR CAMERA APP.ALSO REMEMBER TO REDUCE EXPOSURE A LITTLE IF THE CAMERA ISN'T 100% SMOOTH.
20) CONNECT YOUR PHONE TO PC,MOVE BACK ALL YOUR FILES YOU'VE INITIALLY BACKED-UP AND THAT'S IT.IN ORDER TO RESTORE CONTACTS FROM SD CARD,FIND THE PIM00001.VCF FILE AND TAP ON IT.OPEN IT WITH CONTACTS AND IT'LL RESTORE ALL CONTACTS.FOR SOME REASONS,MY CONTACTS ARE SHOWING THE PHONE NUMER TWICE,I DON'T UNDERSTAND WHY BUT IT'S NOT A BIG DEAL AND I HAVEN'T THOUGHT ABOUT IT MUCH.
PERSONAL OPPINION: I'VE BEEN USING THIS CM11 FOR COUPLE OF HOURS( ~ 24 HOURS ) AND I DON'T HAVE ANY COMPLAIN.IT'S SMOOTH,EVERYTHING ELSE WORKS,IT'S FAST.
Download Links:
Removed
CM11)(kitkat modules)(graphic fix) (super su)
http://goo.im/devs/paranoidandroid/roms/gapps-full google apps
flash kitkat modules mandatory and if u want to root flash and SuperSU 1.94.zp
0
I work hardly 3 mouth to make this real then just ENJOY AND HIT THANKS BUTTON IF YOU LIKE THIS
SPECIAL THANKS TO Mr.Stenly for rom and Marius Cristian for instructions enjoy and HIT THANKS BUTTON
Some screenshots
:laugh::laugh:
Hmm.. Thanks for your work:good: I'll try it.
:good: keep going on your nice work.
in your next version ( I hope so ),
After doing all the installation steps and after putting your touch in themes, camera modification and other stuff,
Can you just make a single flashable zip or even a nandroid backup of the whole rom then upload it
it will make it much easier for us, specially those who don't have an available pc right now like me
dr_hakam2 said:
:good: keep going on your nice work.
in your next version ( I hope so ),
After doing all the installation steps and after putting your touch in themes, camera modification and other stuff,
Can you just make a single flashable zip or even a nandroid backup of the whole rom then upload it
it will make it much easier for us, specially those who don't have an available pc right now like me
Click to expand...
Click to collapse
in next update u can install from update center...
StenlyAndroidProds said:
in next update u can install from update center...
Click to expand...
Click to collapse
Actually I didn't install your rom because I don't have an available pc as I said
that's why I asked you to do that in your next version, if you mind
rely rely rely great work man
you can work with @varun he fixed all bugs in hes kernel here
if you rely fixed MultiTouch you can kill me hhhhhhh
i will download and try multiTouch in fifa14 and StrikeTeam
i will back for report
best Kitkat rom so far! in the next days I'll also try to make a video review of this ROM.I've been using it for 1-2 weeks and it's very stable.cheers Mr. Stenly,all the best !
thanks
Thank you
Thumbs up for you..
good job
My friend made a flashable zip one but i didn't test it yet so make sure you take a nandroid backup first and then install this.
Link Download
Click to expand...
Click to collapse
Link Kernel : https://mega.co.nz/#!xFRkDDrK!CNaIJ0ZS1_MTIqE1pLiehlH_FqJ37MAaKtEqGEF5Hhs
Link ROM ; https://mega.co.nz/#!FZRAnKDA!txo28cipPcnBIgaEkfO9Jjg-xTKr21YyVOMWvtfpZ6s
Graphical Glitches Fix : http://www.mediafire.com/download/yhh4h41tdsdl58w/graphical_glitches_fix.zip
Kitkat Modules : http://www.mediafire.com/download/llv22wd5200nc39/KitKat_modules_by_stenly.zip
SuperSU / Root : http://www.mediafire.com/download/y25w433x4f562eq/UPDATE-SuperSU-v1.94.zip
GAPPS (choose one) : http://forum.xda-developers.com/showthread.php?t=2397942 (micro modular package is recommended)
Instructions
Click to expand...
Click to collapse
1. Download all and move it to your SD Card.
2. Take a nandroid backup.
3. Make sure you following Mr. Stenly's storage instructions first to get internal working.
4. Go to recovery.
5. Wipe data, cache, and dalvik cache.
6. Flash kernel and then ROM.
7. Reboot
8. Go to recovery again, flash GAPPS and then reboot.
Credits
Click to expand...
Click to collapse
- @StenlyAndroidProds
- @koplax antiek
Notes
Click to expand...
Click to collapse
- If your WiFi isn't working, try to flash KitKat Modules and then wipe cache and dalvik cache. In case still not working, try to reinstall CM11 using normal method by @StenlyAndroidProds
- Flash SuperSU / Root if you want to root your phone. (do this after last reboot)
- Flash Graphical Glitch Fixes if your phone faced graphical glitch bugs. (do this after last reboot)
- Sorry for my bad english
Thank you very much for your work, we finally have CyanogenMod 11 but YOU SO too often the bluetooth for the car, you know if you fixed soon?? Bluetooth and have .. Regards and thanks
How is this rom different from other CM11 roms we have?
Nice Job Anyway
Sent from my C2105 using XDA Premium 4 mobile app
Great work man. Thanks!
I'm facing a small issue though. My phone is not being read by my laptop or my desktop either and I can't seem to access sd card from the file manager. Any help?
Man, how is this any different to #root cyanogenmod? Is this just his cm and links to patches you didn't create?
Sent from my C2105.

Root Doogee DG800

The recovery this one created for my and it works perfectly
Download this
https://www.dropbox.com/s/jbtsydi9iiq872q/Root DG800.zip
http://www37.zippyshare.com/v/82645339/file.html
Official Rom
https://drive.google.com/file/d/0B-eEVUUoOlT4bWI1MXRQcU5Fd28/preview?pli=1
Unzip the folder and will come out first and zip multiple folders
The zip-UPDATE-v1.99.zip SuperSU put it in the sd mobile
And also supersupro.apk
Unzip the second download and you create another folder with the rom files in img format
Replace this folder atchivo recovery by the recovery of the first zip folder.
Let the mess
SP_Flash_Tool_v3.1328.0.183 folder and open the flash file tool.exe
Pinchais where it says what you want to scatter and the scatter of the rom folder with recovery bajasteis already changed
When loading uncheck everything below minus recovery
You press F9, you will get a warning that if you say yes or (not in the pc and do not remember)
You turn off the phone, you remove the battery and do not you put it, connect the usb cable to mobile and pc and the bottom bar has to run when you get a green circle on the pc screen is made if it does bada is that drivers have no positions
(If you do not have the drivers positions see the device manager looking for the one with the yellow symbol, you say update search the computer, looking for the folder of the drivers of the first zip "All MTK USB Driver 2014" OK you the installed , if it runs the bar, if not disconnect and then reconnect the mobile)
Unplug the phone and put battery
Boot into recovery mode volume up + power until you start in the center of the screen out some small letters and an arrow moves to move volume volume up to select the option below the top.
In recovery install zip for sdcard to select with the power button and move the volume
Choose zip or something and look SuperSU-UPDATE-v1.99.zip
Click on the install it
Then go back and reset the root is already done
Install supersupro.apk
Open SuperSU and leave so
Settings:
Mark activate superuser
Mark survival mode
Uncheck re-authentication
Allow access by default
Uncheck display notifications
Access full content
Ready
To enjoy it guys, New phone and new root
Sorry for the tirade, so I did as soon as I arrived yesterday morning and so far everything perfect
http://www.htcmania.com/showthread.php?t=836832
I sit it for my English evil, it is not my mother language
busote said:
The recovery this one created for my and it works perfectly
http://www.htcmania.com/showthread.php?t=836832
I sit it for my English evil, it is not my mother language
Click to expand...
Click to collapse
http://devteam.vn/forum/rom-mod-cua...oot-recovery-rom-unbrick-all-in-one#post20874
Worked for me!
Thanks a lot for this information and for the recovery image!
Here is how I did it:
Download this
https://www.dropbox.com/s/jbtsydi9ii...ot DG800.zip
http://www37.zippyshare.com/v/82645339/file.html
I already had drivers for flashing from here (continue reading the thread to find how to install for Windows 8):
http://forum.xda-developers.com/showthread.php?t=2206421
I found the Doogee Dg800 Official ROM here:
http://www.doogeemobile.com/download
I also used the SPflash tool Doogee provides.
Then:
1) Extract the zip from the first (dropbox link) and put the file named UPDATE-SuperSU-v1.99.zip on your SD card.
2) Put the supersupro.apk on the SD card too.
3) Unzip the official Doogee ROM
4) I did not replace the recovery.img in the official ROM folder
5) Open SPFlash and open the scatter file via the FIle menu - for me this was called MT6582_Android_scatter.txt
6) By default all the entries that are loading will be selected (ticked)
7) Following this tutorial (http://www.gizbeat.com/3774/how-to-flash-cwm-without-root-with-sp-flash-tool/) for installing CWM I did:
- Unselect all (remove tick) except for the entry named RECOVERY
- Click on the entry (click on the word RECOVERY)
- Navigate to the recovery image provided in the first download
8) Click Download in SPFlash Tool
9) Turn off your phone
10) Remove the battery for a few seconds
11) Replace the battery but do not turn on the phone
12) Connect the phone via usb cable
13) The bar in SPFlash Tool should go red
14) It should then go yellow and load to the end
15) A green circle should pop up - success.
16) Disconnect you phone and hold Volume Up button and Power button till you go to recovery (hold for a while)
17) You see only three options - select the first one called "recovery". Up volume is for changing options down volume is to select.
18) Now you see the recovery menu - select the second option, using the down volume key, called "install zip from sdcard"
19) Select this with the power button
20) Select the first option in the new menu - it's called "choose zip from sdcard"
21) Scroll down to UPDATE-SuperSU-v1.99.zip and select it
22) Scroll down to the option that says "Yes - Install UPDATE-SuperSU-v1.99.zip
23) You will see it install, when it finishes, scroll to the bottom of the menu and select the "++Go Back++" until you get to the first menu
22) Select "reboot system now"
23) Install supersupro.apk
24) As suggested do the following:
- Open SuperSU and leave so
- Settings:
- Mark activate superuser
- Mark survival mode
- Uncheck re-authentication
- Allow access by default
- Uncheck display notifications (I want notifications so I did not do this)
- Access full content ( I don't think I saw this option)
Done!
Check for successful root using something like Root Checker Basic from app store.
I did this to solve GPS issues that I had with the phone, keep reading for how I solved those problems:
Problem: Applications could not connect to GPS
Solution: Reflash official ROM using this tutorial: http://forum.xda-developers.com/showthread.php?t=1982587
with drivers from: http://forum.xda-developers.com/showthread.php?t=2206421
New problem: GPS is poor and takes long to get a fix.
Solution: Follow this tutorial: http://www.gizbeat.com/2159/gizbeat-101-gps-not-working-on-mtk6589-mtk6577-mtk6575/
which basically comes down to installing and using FasterGPS
Trouble rooting DG800
Hi there
I have spent the last day trying to find a way to root my DG800 and finally came across this post which I see many say it seems to work. However i am a bit confused because for the life of me I can't find the zip-UPDATE-v1.99.zip folder anywhere. This is one of the first steps but I have downloaded and extracted the 3 links given at the top of this post. After extracting the first folder i get 3 more folders 'all mtk usb driver', 'Recovery' and 'SP_FLASH_TOOL_V3.1328.0.183'. As you can see neither of these files are called 'zip-UPDATE-v1.99.zip'. Where am I meant to find this folder that you are talking about? I have searched through every folder and subfolder that came in the downloaded files and I don't find this file you are talking about. I have tried to re download these links from different sources and still can't find that file. Have searched my entire computer and cannot find the file called 'zip-UPDATE-v1.99.zip'. Any help you can offer would be much appreciated.
Thanks
tantrumact said:
Hi there
I have spent the last day trying to find a way to root my DG800 and finally came across this post which I see many say it seems to work. However i am a bit confused because for the life of me I can't find the zip-UPDATE-v1.99.zip folder anywhere. This is one of the first steps but I have downloaded and extracted the 3 links given at the top of this post. After extracting the first folder i get 3 more folders 'all mtk usb driver', 'Recovery' and 'SP_FLASH_TOOL_V3.1328.0.183'. As you can see neither of these files are called 'zip-UPDATE-v1.99.zip'. Where am I meant to find this folder that you are talking about? I have searched through every folder and subfolder that came in the downloaded files and I don't find this file you are talking about. I have tried to re download these links from different sources and still can't find that file. Have searched my entire computer and cannot find the file called 'zip-UPDATE-v1.99.zip'. Any help you can offer would be much appreciated.
Thanks
Click to expand...
Click to collapse
i also cannot find it, hopefully you have found it lol i cant find the file anywhere!
question
one massive question i have with this thread is..... DOES ALL THIS FORMAT THE PHONE.
if so thats fine but it would be really handy to know
The file from the dropbox link disapeared Is there anybody who still has it, and can reshare it ?

[SHARED]Auto Flash Firmware Tool [APK][LEECO DEVICES]

Le Flashing tool : Release date 2016.05.10 : Author: pixle​
The software is an automatic flashing software, features included:
One-button automatic flash from MEMORY through TWRP recovery.
The software automatically scans the memory card Flash packages (greater than 200 Mb) and displays the list
Allowing users to select the firmware you need to flash.
Before Start:
1. The phone must be unlocked.
2. And have access to root authorization.
How to use?
1. Copy the Firmware on mobile/Memory card you want to flash.
2. Open the software by clicking on it & select "select Flash from the memory card" button and choose the objective firmware
3. click on start.
4. Just wait for finishing the process
Download Link: G-Drive / AHF
Code:
Important Note: Always backup your data before making any change in you mobile. Try at your own risk. Author or i will not be responsible for any damage.
VIDEO TUTORIALS:
source

Categories

Resources