Restore your spectrum 2 back to clean factory stock - General Topics

RESTORE YOUR SPECTRUM 2 BACK TO CLEAN FACTORY STOCK
AFTER SECURITY ERROR OR OTHER ISSUES​
WARNING
• I do not take any responsibility for what you do to your device. If you decide to do this, you do so at your own risk.
​ Read and understand the whole guide first before actually performing the instructions.
• This is how to fully return your phone back to stock. It will wipe all data on your device so >Back Up Anything You Want To Save.
​ This will take some time to do, not a 5 minute job.
REQUIREMENTS
• Downloaded the >KP500 Utility Tool and unzipp to your desktop.
• Download firmware >VS93010E_05.S10E_05.P58015.R5 wait for it to finish downloading (or the below firmware if this doesn't work)
See "This Post" Before Using this Latest JB Update (If the above firmware doesn't work or you want to try the Latest Jelly Bean Firmware Update >VS93021B_05.S21B_05.P58017.R5 be sure to to change the cab input path below to match).
• Next open and put the firmware in the "LG_Tools" folder on your desktop.
• Download >Driver Package and LG Support Tool and install onto your computer.
• Backup all personal data on your phone to make sure you have a copy of your personal data
​ e.g., Contacts, SMS, MMS, Internet Settings, Wi-Fi Passwords Apps, and the like.
​ For backup tips, check this guide on >How to backup your spectrum 2 device.
INSTRUCTIONS
• Make sure to charge your battery to 100%
• Install the driver package and LG Support Tool.
• Next go into your Windows "Device Manager" on your computer
​ Disable the device under Modems >LGE AndroidNet for VZW USB Modem.
• Remove your battery and remove your memory card.
• Reboot your phone into "Download Mode".
​ Re-insert your battery [not your memory card] and replace the back plate.
​ Hold down vol up + vol down and Plug in the USB cable while holding both buttons.
​ When the download screen come's up on your phone, you can let go of the vol controls.
​ Now open the "LG_Tools" file on your desktop and follow the directions bellow.
1. Run your "KP500-Utils-EN.exe" as administrator.
2. Choose: I "Flash with assistance (file .cab)" and press enter.
3. Next it will show: "Phone Model (KP500)" enter VS930, and press enter.
4. Input the full path to your cab file including .CAB at the end (i.e. C:\Users\YOUR COMPUTERS NAME\Desktop\LG_Tools\VS93010E_05.S10E_05.P58015.R5.cab) and press enter.
5. Now Input the full file name of your cab without the Cab (i.e. VS93010E_05.S10E_05.P58015.R5) and press enter.
• You will see the LG update tool pop up and a indicator bar will start
• Then it will stop and you will see a pop up that says "Restart" click on
• Now It will go threw extracting the cab file and then extracting a .bin file
• Wait for your phone to finish flashing and let it reboot on its own
• This will take some time for It to complete
ONCE THIS IS DONE
• You should see a normal boot process and now use your phone as if it was brand new.
COPY THE LINK BELOW FOR ALL THE DOWNLOADS AND MORE INFORMATION TO THIS POST
rootzwiki.com/topic/36201-so-bricked/page__st__10#entry1043166

Related

[GUIDE] Sensation 4G - stock GB to rooted ICS (T-mobile release). For noobs!

This is a guide for noobs by a noob to get from a stock gingerbread T-mobile (USA) Sensation 4g to a *rooted* version of the recent T-mobile ICS update (with working wifi calling etc.).
With root you can install your own tethering apps and lots of other things. By following the steps you also get to install other custom ROMS.
I did a lot of (overwhelming) reading and some question asking (see http://forum.xda-developers.com/showthread.php?t=1658100 , Thanks to GROGG88 ) to get to this point.
This update has been done to Qty.3 sensation 4g phones, using 2 different windows 7 pro 64bit PC’s so it looks pretty repeatable so far.
So here we go….
Preparation
1. You will need a *stock* Gingerbread T-mobile sensation 4g phone with an SD card with at least ~4 GB free space.
2. A fully charged battery
3. A windows PC and micro usb cable
4. $10 to spend in the Google play store.
5. A healthy snack
6. 2 healthy drinks
PART A – S-OFF – so you have the lowest level control of your phone
PART A – S-OFF – so you have the lowest level control of your phone
1. Backup everything of value on your SD card to your PC (photos videos music documents etc.). Have your first healthy drink while the file copies complete.
2. Make sure there are no .Bin or .Zip files on the root of your Sd card.
3. Download v1.1 tool: http://forum.xda-developers.com/showthread.php?t=1497404 and run.
4. Install HTC drivers.
5. Remove battery from phone. Put battery back in. hold down power+ VOL DOWN – wait until boot screen.
6. IMPORTANT: note down HBOOT version number at the top of the screen.
Then reboot phone
7. Use tool to start “revolutionary s-off method”, make a note of the serial number in the key prompt.
8. Connect phone and select htc sync mode
9. Go to: http://revolutionary.io/ and chose windows download so you can unlock a beta key.
10. Enter the serial number from the console and copy your beta key (CASE SENSITIVE)
11. Paste beta key into console and hit enter
12. It ill install and reboot your phone a lot.
13. IMPORTANT : On the last reboot it should say “S-OFF” at the top of the screen. If it doesn’t then avoid the next parts.
14. Choose NO to clock work recovery when prompted on the PC.
15. Reboot phone – check everything still working
PART B – New hacked radio and super user
PART B – New hacked radio and super user
1. Install CWM 5.0.2.0
a. Load from the "Sensation_All-In-One_Toolkit_v1.1" :
b. Turn on debugger (setting - apps – dev. – debug), phone connected on usb
c. Select htc sync mode.
d. Run “CWM 5.0.2.0” from the toolkit.
e. Phone will reboot after completion
f. check everything still works.​2. New (Gingerbread) firmware
a. copy "PG58IMG.zip" to the rood of the card.
IMPORTANT : This is *not* the same PG58IMG.zip” that will be used in the last part.
http://forum.xda-developers.com/attachment.php?attachmentid=706572&d=1314848127
b. remove battery, re-install, hold down power+ vol DOWN until boot menu.
c. Press volume UP to install the update .ZIP
d. When finished press power button to reboot
e. Check everything still works
f. IMPORTANT: REMOVE "PG58IMG.zip" from the root of the sd card​3. Super user access – so you can install busy box , backup app and recovery
a. copy "su-2.3.6.3-efgh-signed.zip" to the root of the SD card
http://forum.xda-developers.com/attachment.php?attachmentid=670828&d=1311991644
b. remove battery, re-install, hold down power+ vol DOWN until boot menu.
c. Use vol up/down to navigate the menu and use power to select the “RECOVER” option.
d. You will now go into clock work mod (CWM)
e. Choose “install zip file from SD card”
f. Choose “ choose zip file”
g. Scroll down and select “su-2.3.6.3-efgh-signed.zip”
h. Scroll down and select “yes – install su-2.3.6.3-efgh-signed.zip”
i. You will see the install end with an “error ….. (status 0) “ and “iosntalation aborted” do not be alarmed this seems to be normal.
j. Choose” go back”
k. Choose “reboot system now”
l. Check everything works
m. If all went well you should now see SU / Super user in your apps list.​
Part C – Getting ready for a custom rom - install busy box , backup app and recovery
Part C – Getting ready for a custom rom - install busy box , backup app and recovery
1. BusyBox
a. Go to market/play store and download and install “busybox” by Stephen (Stericson)
b. Fin and launch busybox
c. When Supper user asks give busybox SU permission
d. From busybox main screen shoose “install”
e. Installation should report ”successful”​
2. (optional but highly recommended) Titanium backup ($6.50)
a. Go to market/play store and download and install “titanium backup ” (free)
b. Go and buy and install the pro key version ($6.50)
c. Back up EVERYTHING.
i. Go to settings and chosoe ot backup all types of app data everywhere.
ii. Then do a backup of all system and apps
iii. Select menu and do batch
iv. Go have your healthy snack while the backup completes
v. Copy the backup on your Sd card to your pc and/or to your google drive account for safe keeping​
3. 4EXT recovery control ($3)
a. Go to market/play store and download and install “4EXT recovery control ” by “4EXT” ($3)
b. Open “4EXT recovery control”
c. Choose “online install / upgrade”
d. Grant Super user access
e. Say yes to go online
f. Again Choose “online install / upgrade”
g. Say yes to “sensation/XL”
h. Choose 4EXT Recovery touch v1.0.0.5 RC3
i. Choose install (wait for the download)
j. You should have success.
k. You will be promted if you are S-ON?
If in part A you are very sure that you are S-OFF (which you should be) then answer “NO”​
Part D – Super CID (11111111) – to allow you to flash any rom.
Part D – Super CID (11111111) – to allow you to flash any rom.
1. Install ADB tools
a. Download windows adb tools:
http://forum.xda-developers.com/attachment.php?attachmentid=672540&stc=1&d=1312138079
b. copy / uncpomrpess to c:\adb
c. open console widows in c:\adb​
2. Set the phone to SuperCID
(from thread step 4: http://forum.xda-developers.com/showthread.php?t=1192300 )
a. Ensure your phone is switched on (regular home screen) and connect it by USB in HTC SYNC MODE (Ensure usb debugging is on settings)
b. enter the command "adb devices". This is to confirm your phone is connected. (It should come back with list of devices attached and your serial number)
c. enter the command "adb reboot-bootloader". (nothing further required device WILL reboot in bootloader)
d. IF it doesn't you can Manually put the phone in the bootloader/hboot mode
e. Navigate to fastboot by pressing volume down and pressing power button to select (power off > vol down + power on)
f. It will take you to the fastboot bootloader screen on your phone
g. Connect your phone via USB
h. Your Screen should now read fastboot USB
i. enter the command "fastboot oem writecid 11111111" (that is Qty. 8 of “1”)
j. enter the command "fastboot reboot-bootloader (Wait for it to reboot the bootloader)
k. enter the command "fastboot getvar cid" [it should confirm your CID is 11111111]
l. enter the command "fastboot reboot"​
3. Note: You can now flash any ROM you like.
Part E – (Steve’s) Rooted ICS and radio install
Part E – (Steve’s) Rooted ICS and radio install
1) Get files:
a. IMPORTANT: remove any old .zip files from the root of your SD card.
IMPORTANT: this new “PG58IMG” is NOT the same as the one from part A above.
b. Copy to root of SD card new ROOTED ICS firmware “Sensation_3.32.531.14.zip”:
http://forum.xda-developers.com/showthread.php?t=1654347
file: http://www.4shared.com/zip/34Y1RPQf/Sensation_33253114.html
c. Copy to root of SD card new radio Firmware “PG58IMG.zip”:
http://forum.xda-developers.com/showthread.php?t=1656413
file: http://www.mediafire.com/?oy1lq3lxdcjcf7o
d. IMPORTANT : Make sure you have both of these zip files on the root of your phone SD card or you may get very stuck.​
2) Install new radio firmware:
a. remove battery, re-install, hold down power+ vol DOWN until boot menu.
b. Press volume UP to install the new radio firmware .ZIP
note: there will be a black screen/reboot and it will finish up the install.
c. Reboot and NOTE: you will no longer be able to boot to a useable phone / gingerbread (you will be stuck in a boot loop). you must proceed to the next step:​
3) 4EXT control – backup your existing ROM
a. remove battery
b. IMPORTANT : REMOVE SD CARD (or you will be stuck installing radio again)
c. re-install battery, hold down power+ vol DOWN until boot menu.
d. Choose recovery menu option – you will enter the fancy EXT4 menu system.
e. Re-insert your SD card (without removing power from the battery)
f. Choose “backup / restore” to do a backup (of your present rom).
g. Go and have your 2nd healthy drink while it backs up.
4) 4EXT control – Install the new rooted ICS ROM
a. Choose “ install from SD card”
b. Choose “choose .zip from sd card”
c. Scroll down and locate “Sensation_3.32.531.14.zip”
d. Locate the Sensation_xxxxx.zip file and install
e. Once the install is complete go back and go to “wipe/format” and wipe the “dalvik cache” ONLY.
f. Reboot.
g. The phone will now update/migrate to ICS. After a few minutes (or many more depending on how many apps you had installed) you phone will be up and running with all your old programs and setting intact.
h. Note: the phone is going to be slow for an hour or two because it is going to be very busy:
i. some apps will request super user when run for the first time. You can usually grant it ok.
ii. Gmail will do a massive re-sync that could take up to an hour (see the sync symbol at the top of the screen )
iii. Many apps will start updating in the play store or need a manual update.
iv. After an hour or so (and a few reboots) your phone will be going at full speed.
i. Enjoy. Go play with ICS and then start trying out some cool root (Super user) only apps like “Samba file share”​
other
reserved
Mods please delete this post by me T-Macgnolia as I posted before htcsens2 wqs done posting the guide. My sincere apologizes.
T-Macgnolia said:
Mods please delete this post.
Click to expand...
Click to collapse
You're welcome
No I meant my post not your post I will edit so it is understiod sorry. Oh and if a mod will please delete this post also.
Great guide!! Very understandable! nice of you to take your time to write it for every new person! They will love it!
Sent from my HTC Sensation Z710e using xda premium
realsis said:
Great guide!! Very understandable! nice of you to take your time to write it for every new person! They will love it!
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Thank you.
It was to help myself, my wife, and friends with the same phone - since it took me several days of research to get mine to rooted ics and i also had my wifes to do I thought i had better document every step.
T-Macgnolia said:
No I meant my post not your post I will edit so it is understiod sorry. Oh and if a mod will please delete this post also.
Click to expand...
Click to collapse
Ahh , now i understand.
it will be more helpful u should create a guide from ics ota update revert back to gb. from forum more users has that problem after ics ota update.....

Lenovo A60+ ROOTED stock rom (Philippines). WORKING contact identification.

Lenovo A60+ ROOTED stock rom (Philippines). WORKING contact identification either international format or local format.
this one works without any problems for PH Lenovo A60+ specially have tried ALL stock roms(chinese) and cooked/custom roms has problem with caller i.d. or number identification from international format (+63xxxxxxxxxx) to local format (0xxxxxxxxxx) in your contacts or phonebook. see instructions below to root your Lenovo A60+ without having issues/problems with caller/contact identification:
in ALL stock ROM and custom roms i have tried, ALL these have ISSUES or PROBLEMS with caller/contact identification. lets say:
a. your contact stored number is 0919xxxxxxx
b. 0919xxxxxxx calls you, the contact identification will show.
c. 0919xxxxxxx send you an sms/text. the contact will NOT show because the SMS sender is +63919xxxxxxx
twist:
a. your contact stored number is +63919xxxxxxx
b. 0919xxxxxxx calls you, the contact identification will NOT show. because the caller incoming number is 0919xxxxxxx and your phone number in contacts is 63919xxxxxxx. this two numbers is treated as two different numbers.
c. 0919xxxxxxx send you an sms/text. the contact will show because the SMS sender is +63919xxxxxxx
basically in the Philippines number formats sent by networks are:
receiving calls: 0919xxxxxxx or international format
receiving SMS/text: +63919xxxxxxx or local format
as said i have tried ALL(as of date january 14, 2012) stock roms and custom roms available in the internet for rooting this Lenovo A60+. have spent DAYS figuring out and trying out(kaskus, xda-dev, symbianized, etc). dont look any further and waste time like what i did. this procedure is for you to save yourself days and time lost!
----------------
DISCLAIMER: i am not responsible for any lost of data, your phone bricked or loss of your phones warranty. remember that ROOTING an android device VOIDS manufacturers WARRANTY. I DO not HOST any of these files.
BEFORE rooting, do this necessary steps:
1. backup your phone's IMEI. this is likely to be erased/lost in ROOTING or installing new roms. thus you wil get an "Invalid IMEI" message or your sim cannot locate networks or has no signal. check google play for IMEI backup apps and backup into your SD card. otherwise read the tutorial after on how to re-create your IMEI file and restore into your phone system.
2. BACKUP your contacts and messages/sms, applications etc. most likely all data will be lost too. so you need to restore it after ROOTING procedure.
3. DISABLE and turn off any anti-virus softwares in your PC and any PC to Phone applications such as IdeaTool, MobileGO, Snap Pea, Etc. so that this will NOT interfere with the rooting procedure.
----------------
TUTORIAL PROPER in rooting your Lenovo A60+ ROOTED stock room version with SU(superuser apk and binary), the EASY and beginner/newbie way:
Download these files and tool:
1. Philippine STOCK Lenovo A60+ ROM version A60+_ROW_S310_120823 ROOTED with SU or superuser: mediafire.com/?n1i35c3neu6ud3d - Size 125.45 MB - DO NOT unzip this.
2. Mobileuncle apk and Recovery Image: mediafire.com/?bo12ktkrrn57314 - Size 5.29 MB - unrar this to get a.) mobileuncle.apk b.) recovery.img
3. Windows Driver: mediafire.com/?31nddwqdot5ajp2 - Size 10.89 KB - UNZIP this. this is for your PC to read your phone via flashtool (so link number 4 will be able to communicate PC to Phone/Device).
4. Flash Tool: dropbox.com/s/f7gfyqtwyn5qkpa/ISO-8859-1__Flash tool.rar - Size 3.60 MV - unrar/unzip this to get "Flash tool" folder.
5. Firmware Upgrade: mediafire.com/?ehiyzbdmlauo7i7 - Size 166.59 MB - unrar/unzip this to get the folder "Boot". this is a chinese custom rom firmware build number A60+_S312_120630 with SU(superuser) and mobileuncle tools 2.3.6 pre installed and a lot of pre installed bloatwares. dont worry will be removing this and installing an english language rooted rom anyways.
Follow these step by step, with SIM cards REMOVED from the phone/device:
Step 1: Prepare needed files and copy to SD Card the three files:
a.) a60+ori.zip (link number 1) should be zipped file so DONT unzip this.
b.) mobileuncle.apk (unzipped from link number 2)
c.) recovery.img (unzipped from link number 2)
into the root/top folder of your SD card. see screenshot here: http://screencast.com/t/AvBLMyth
Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7).
Step 3: ROOTING with Flashtool - unplug usb cable from your phone, insert the battery (do not turn on the phone/device yet).
Run Flash Tool(Flash_tool.exe in the unzipped folder of link number 4). screenshot here: http://screencast.com/t/BLOR3S0Nn1
while in flash tool window:
a.) Click scatter-loading at the upper right corner of the flashtool window.
b.) browse to "Boot" folder which was extracted/unzipped in link number 5.
c.) select MT6575_Android_scatter.txt file and click open. see screenshot: http://screencast.com/t/6TaKi73J
d.)
d.1. Tick/Select all 9 options.
d.2. Click "Firmware -> Upgrade" button at the top.
See screenshot: http://screencast.com/t/OIKfwN0s
d.3. Flashtool will now be SEARCHING or WAITING for your device to be connected and ready to flash/write the files you selected in step d.1. see screenshot: http://screencast.com/t/1H3By7t3wsll
Step 4: while your phone is TURNED OFF, NO SIMS, NO SD card,.. and it has its battery on it; on your phone/device HOLD(press and dont release) "volume +" or "volume up" key(top-right side of your phone) and plug the cable until the progress bar at the bottom is running, when the progress bar turns RED, you can RELEASE the "Volume up/+" key. see screenshot: http://screencast.com/t/wDPM9Ym8AHG
Wait around 5 minutes. the progress bar at the bottom will show as RED then YELLOW, then TEAL. wait until a green circle in a pop up window appears. when the green circle appears; this mean success in flashing with the rom upgrade. see screenshot: http://screencast.com/t/OGLHkf55
Step 5: Close Flashtool application in your PC. unplug the phone/device USB cable. turn on the device you would notice the default language is Chinese. to change language, go to settings(purple icon with gear), scroll down to languages(violet icon with letter A). select first option at the top. tap English.
Step 6. INSTALLING MOBILEUNCLE CWM RECOVERY - Turn off your phone/device and insert your sim cards and your SD Card(the SD card you copied the 3 files in Step 1). turn it back on. on "New Sim Detected" pop up window. just close it.
6.a. turn OFF "GPS" and "Data conn." at the top(swipe the top area going down).
6.b. open the application "FileBrowser" which is pre installed in the firmware. browse to your SD card's root and install mobileuncle.apk that you copied in step 1(this is version 2011.01.04v1.2). a pop up window will show "Install blocked". tap "Settings" tap or check "Unknown sources". Tap "OK" on the "Attention" window. tap on back. tap again on mobileuncle.apk tap install. tap open. tap get started. tap OK in the chinese pop-up window.
6.c. tap on "Flash Recovery From SdCard" (its the second option from the top). tap on "recovery.img" then tap "OK". Superuser will pop up and quick tap OK to grant superuser permission.
6.d. the phone will reboot and enter CWM-based Recovery v6.0.0.3(english version, CWM stands for ClockWorkMod).
Step 7. INSTALLING THE STOCK ROM WITH ROOT USING CWM - IN CASE that the phone/device did not enter CWM recovery but booted as regular boot. turn the phone off. turn it back ON while you HOLD on the "Volume +/up" button. this will enter to CWM-based Recovery. otherwise proceed with steps below:
7.a. while in the CWM-based Recovery console, Lenovo A60+ touchscreen doesnt work. the hardware volume up and down works as buttons to scroll up and down. while the power button works as the SELECT button.
7.b. scroll down twice(press volume down button twice) to highlight "wipe data/factory reset" option. press power button to select it. scroll down and highlight "Yes -- delete all user data". press power buttn to select. wait for around 20 seconds to complete.
7.c. scroll down to "wipe cache partition" and press power button. scroll down to "Yes - Wipe Cache". wait 2 seconds to complete.
7.d. scroll down to "install zip from sdcard" and press power button. press again power button to select "choose zip from sdcard".
7.e. scroll down to locate and highlight "a60+ori.zip". press power button. confirm the install by scrolling down and select "Yes - Install a60+ori.zip". wait for around 1 minute for the process to complete. the process completes with the console last text "Install from sdcard complete." shows at the bottom while you will be able to choose from the options at the top again.
7.f. scroll down and select +++++Go Back+++++ then select "reboot system now".
Step 8: FIX on INVALID IMEI AFTER SUCCESSFUL ROOTING - by now you have a ROOTED A60+_ROW_S310_120823 ROM. all apps are working EXCEPT that your phone has "Invalid IMEI". this is because Device IMEI's are UNIQUE to each phone. now, lets fix this!!!
files and tools to download:
8.1. download t-kstore.com/imei.zip - Size 4.22 MB - its a dos based IMEI generator and encryptor and write to file.
8.2. download download.estrongs.com/app-es-file-explorer.html - Size 2.81 MB - an apk "es_file_explorer_v1.6.2.4.apk" and application to manage files in your android device. copy the es_file_explorer_v1.6.2.4.apk file to your SD card's root/top folder.
8.3. RE-CREATING your phone/device IMEI - locate your Unique Lenovo A60+ IMEI. there are two places these 15 digit number can be located. FIRST is when you open your phone, its in the sticker attached to your phone under the battery. on Philippine released phones its in between the stickers of Lenovo and NTC stickers. SECOND location is the sticker on the side of your phone's Lenovo box/carton/package.
8.4. extract/unzip imei.zip that you downloaded in 8.1.
8.5. go to the extracted folder and run "dos.cmd". this will run a DOS console window in your pc.
8.6. in the dos command line type:
imei.exe 123456789012345 123456789012345
then press enter to execute the command line.
whereas, the first set of numbers is your IMEI #1 and second set is your IMEI #2 as you located in Step 8.3.
after pressing enter this will generate your encrypted IMEI file with the name "MP0B_001_NEW". see screenshot: http://screencast.com/t/lUUzC3yiTNn
8.7. close the dos console window. rename that file generated "MP0B_001_NEW" to "MP0B_001" (without the qoutes) in the folder where you extracted imei.zip
8.8. copy MP0B_001 to your phone's sd card. for this tutorial just copy it to your sd card's root folder.
8.9. INSTALLING ES Explorer, moving the IMEI file to the phone's correct system folder - install and run es_file_explorer_v1.6.2.4.apk which you previously downloaded and copied to your SD card in step 8.2.
8.10. open ES File explorer on your phone. first window on first run just click okay. tap on the bottom left button of your A60+. tap "Settings". tap "File Settings" select or check "Show Hidden Files". tap back. scroll down and tap "Root Settings". tap or check "Root Explorer". SU pop up will show and grant root or tap yes to give privilege to ES File Explorer. tap or check "Up to Root" and "Mount File System". tap back twice.
8.11. on your sdcard's root/top folder locate the file MP0B_001 which you copied in your sd card in step 8.8.
long press on the icon then tap "Copy". a little pull up window will show at the bottom(which is the clipboard of es file explorer).
8.12. tap the "favorites" icon at the top-right corner. tap the device icon or the one with "/" which is to the right of the HOME or house icon. this will bring you to the root folder of your device. navigate(navigate by tapping the folders) to: /data/nvram/md/NVRAM/NVD_IMEI/
you will see 3 files. long press on the MP0B_001 then select "Delete". yes DELETE you wont be using this anyways. tap okay when youre asked to confirm deletion. at the bottom, swipe up the es file explorer's clipboard. tap on MP0B_001 icon which is in the clipboard. a message will show something like "MP0B_001 successfully copied...". exit es file explorer. RESTART your A60+.
EUREKA!!! you strike gold! you now have a ROOTED A60+ with working caller/sms identification.
Step 9: restore your backups, apps, sms, contacts, settings.
------------------
SHOUTS to: "mingxincun" (who cooked the stock rom to have SU and ROOT), Tyo Ramadhan(Indonesia LE group), T&K Online Store(for the imei fix), kaskus, xda-dev, symbianized pinoys and FB Lenovo A60+ users/fan page in facebook.com/lenovoa60plususers
repost from here: http://www.facebook.com/notes/guill...orking-contact-identification/539507352727233
PERFECT!!!
Dude thanks man. this is timely for everybody here in the PH. but untimely for me, unfortunately i followed the steps of kaskus. haha
nevertheless this is cool.
bro for others to really appreciate this post, you got to put them hyperlinks right.
Im copying the flashtool link but it gives me this bandwidth error, because Ill just be needing the root access. android market wont download apps i need to replace it.
nag eenglish lng ako pra mka benefit din yung mga forangers. hihihihi
Could you also help us how to swap sd card with internal storage? so that apps could directly install in the external sd card.
Link2SD
thanks for the tut bro!!!
to increase internal storage of A60+
we need to install Link2SD
Using Minitool Partition wizard
we need to create 2 partition in our SD card
first partition must be set to Primary & Fat32
second partition must be set to Primary & ext4 (A60+ doesn't recognized fat, fat32, ext2, & Ext3 in second partition)
please note that the second partition even we sized it as 2gb when we open the link2SD storage info
the second partition display it as 1Gb only, but worry not it will still going to use the other space yuo have created
mine, was set to 2gb and have transferred 153MB of files to the second partition
and it is still showing 100% free and used: 153MB
@guilliam perhaps you can add this to your tut.
Thanks again..God Bless!
thanks for this i have rooted my lenovo a60+ hehe, there's one problem i've encountered when i go to setting and click on the about phone the settings becomes force close, is it happened to you? well i had follow the instructions though.. anyway thanks for this TUT hehe hope there will be rom for our lenovo a660+ which had no bugs at all hehe
Guidance needed!
Hello Guiliam
Thanks for such a detailed post. I am quite new to this, and just have some basic understanding on the rooting/flashing etc. I am planning to root my Lenovo A60+ which I have bought in China, which has unnecessary bloatware and more importantly there is no Google Play app in that. I am based in India, and would want to know if your ROM will work for me as well?
Is your post only covering Rooting part or does it also cover any flashing part (custom ROM), the reason I ask is because apart from rooting, I also want to install the ROM which is in English (or can the language be changed automatically?)
I am looking to root my "Lenovo A60+" - primarily for reasons like:
1. I do not have stock Google Play Store app, and I am not sure how to download that app.
2. I have bought this phone in China, and there is lot of unwanted Chinese software which I want to get rid of.
3. I want to get rid of the Chinese keyboard (iFlytek) and only have Android keyboard.
I have questions like:
1. If my rooting fails for some reason, can I un-root the device to restore it to the previous state (i.e. with all the stock apps)
2. I want to avoid bricking my phone, even if it happens, will I be able to go back to the previous state by un-rooting?
Some details of my phone:
Model - Lenovo A60+
Android version - 2.3.6
Build number - A60+_S318_121108
Baseband version - MAUI.11AMD.W11.50.SP.V13.P10,2012/07/13 13:26
"Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7)."
Anyone I need help...I dont get this step >_<"
Eternal29 said:
"Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7)."
Anyone I need help...I dont get this step >_<"
Click to expand...
Click to collapse
You'll need to cancel Windows looking for the drivers. Of course, the installation will fail.
Then go to Device Manager and look for the device with the "!". Right-click on that device, choose Update Driver then locate the drivers that you downloaded.
---------- Post added at 03:19 PM ---------- Previous post was at 03:15 PM ----------
Thanks a lot for this excellent tutorial!
I've just successfully rooted an a60+! Now I can get Link2SD to work on this.
anasuri said:
Hello Guiliam
Thanks for such a detailed post. I am quite new to this, and just have some basic understanding on the rooting/flashing etc. I am planning to root my Lenovo A60+ which I have bought in China, which has unnecessary bloatware and more importantly there is no Google Play app in that. I am based in India, and would want to know if your ROM will work for me as well?
Is your post only covering Rooting part or does it also cover any flashing part (custom ROM), the reason I ask is because apart from rooting, I also want to install the ROM which is in English (or can the language be changed automatically?)
I am looking to root my "Lenovo A60+" - primarily for reasons like:
1. I do not have stock Google Play Store app, and I am not sure how to download that app.
2. I have bought this phone in China, and there is lot of unwanted Chinese software which I want to get rid of.
3. I want to get rid of the Chinese keyboard (iFlytek) and only have Android keyboard.
I have questions like:
1. If my rooting fails for some reason, can I un-root the device to restore it to the previous state (i.e. with all the stock apps)
2. I want to avoid bricking my phone, even if it happens, will I be able to go back to the previous state by un-rooting?
Some details of my phone:
Model - Lenovo A60+
Android version - 2.3.6
Build number - A60+_S318_121108
Baseband version - MAUI.11AMD.W11.50.SP.V13.P10,2012/07/13 13:26
Click to expand...
Click to collapse
I'm in the same situation!
Did you root it yet?
sir do you have root procedures for lenovo s720?
dehq said:
I'm in the same situation!
Did you root it yet?
Click to expand...
Click to collapse
Rooted it today, and it's awesome!
It has Google Play
Thank you, @guilliam!
the link #4 ( dropbox ) is not working. has exeeded bandwith ;o(
Does anyone have ROM with Polish language?
Thanks Very Much
You saved my life dude. Thanks a lot.
Can we fix the contact id on all rom or just that rom you attached.
Stock rom is ok but it can't play some game that others rom can (Bad pigges, ashalt 7 can run on S317 but S3110 and S311 can't)
PS. Does anyone have A60+ row s311 121023. Please backup and sent it to me. [email protected]. Thank in advanced because I want to unroot my device for guarantee
Worked simpleee
As simple as its is.. U can stop @7 if IMEI is fine with ur device as was with mine..
---------- Post added at 01:54 PM ---------- Previous post was at 01:49 PM ----------
Can u help to format now after rooting the device once by the above method? The usual method by pressing the vol- key doesnt work anymore...
Question, I need help!
Hi, thanks for the great tutorial, I have successfully rooted my Lenovo a60+! My question is, can I install custom ROMS on my freshly rooted phone? Popular ROMS like Cyanogenmod or Paranoid Android require phone compatibility, and my phone is not on their list. I'm starting to feel sick after I have rooted my phone because I have no idea yet how to install custom roms (which was my main reason of rooting), will you be nice to me by answering these questions?
- Does custom ROMS do require phone compatibility?
- Are all or some custom ROMS compatible to all android phones as long as they are rooted?
- If so, do you have a list of ROMS that are compatible to my Lenovo a60+?
- Lastly, please tell me that there is a way to upgrade the phone's OS from gingerbread to jelly bean or even ice cream sandwich.
Please help me! I have an empty rooted Lenovo a60+ and I need a custom ROM to be installed before I put my data back again. Thanks in advance, and also for the root tutorial. ))
Please! Anyone! Heeeellpp!!!
My Phone is Bricked!
It stays in the Lenovo screen and will not eventually boot up.
I have installed Chainfire 3D from the market and was surprised that it did not have the options that I was expecting from the tutorial, so I read the description on the application, it says, ''Driver not installed, you need to install driver before you can access options''. So i installed the drivers, then everything was ok, I can still use my phone, but Chainfire 3d still needs me to update the drivers, so I did, then, suddenly, my phone's screen just froze, and I cannot access my notifications, home back menu keys, power button, in fact my screen does not work anymore. Feeling nervous, I left it untouched for an hour and checked it back its still the same the moment i left it. So I took the battery out, tried to turn it on again, and now, I'm stuck with the Lenovo screen and will not boot up to stock ROM, please Help me! I need my phone as soon as it is fixed! Please HELP!!!
Here are the details of my rooted Lenovo A60+:
- Followed the rooting process here, so I have Clockwork recovery mod 6
- Has a installed Chainfire 3d 1.7
- Installed stock ROM
- Has no backups
- Can access the recovery mode
- Already done the ''wipe data'' ''wipe cache'' ''factory reset'' and everything, wiped my phone clean.
Please help me, my parents are going to kill me if I can't fix my phone.
Thanks for the post. When I tried I got an error "S_PART_NO_VALID_TABLE (1037)" after the status bar showed 100% in red colour. Need help please. Thank you.
Thank you for the post but it cannot work
Error S_PART_NO_VALID_TABLE (1037), and the status bar stays 100% red color. Anyway, thanks

[Completed] R

Alright for the past two week I had searched every corner of the internet looking up on how to install the “MOAR ROM”. Just getting the same answer install with “TWRP”. And to install TWRP you had to root your phone. So now I had to search on the internet and find a tutorial on how to root my phone. In the end I had to go through three different tutorials on how to get the MOAR ROM flashed on my phone. And where I had to go to get the files to download.
Well so you don’t have to do the long, and arbitrary tasks that I had to go through. Here is a tutorial – Telling you from start to finish on what you need to do.
This is for the Sprint Variant of the Samsung Galaxy S5. I don’t know if this will work on other version of the S5.
I apologize on the crudeness of this tutorial, a lot of this was written from memory.
All of the software you need to download is provided by clicking on words that are highlighted in brownish tan-ish color
I don’t not nor do the developers of the software you use are responsible for the lost of data and/or lost of your phone. You assume responsible for modifying your phone.
I have not created any of the software provide in this tutorial.
Step 1. Make sure you have VPU1BOA6 (Lollipop) OS installed on your phone.
-To see if you have this already installed your phone.
- You go to your phones “Setting”
- From there go to “About Device”
- You will then see “Software Version” and underneath that you will see “G900PVPU1BOA6”
If you see “OA6” you are good to go on to step 2. for rooting your device. So Please Continue. If you do not see this that is okay all you need to do is either update your phone or you need to flash the appropriate OS on your phone. To do this continue on to step 1a.
Step 1a. If you fail to see “OA6” in under “Software Version” then you will have to download some files.
- You will need to download Odin
- Then you will need to download the OS “Lollipop”
- Once you have both of these move to step 1b.
Step 1b. Warning!!! Installing this OS will wipe your phone of all its data. Highly recommend that you create back of contacts, photos, videos, etc.
- Now unzip Odin, and run SM-G900P_OA6_FullRestore.exe (This is will give you the Lollipop OS it will unzip it to the file destination you wish)
-Run Odin, Click on the AP button – A window should appear, navigate to where you unzip the OS and click on it.
- Now it is time to move on to set 1c.
Step 1c. Now it is time to put your phone into Recovery Mode and to connect to the computer.
- Power down the phone, once the phone is power down hold the “Home + Power + Volume Down Buttons” Do not let go until you see text show up in the upper left corner of the screen.
- Now some of you might see a screen that gives you a Warning about custom firmware and roms. And press up on the volume on button to continue or press volume down to restart the phone. If you want to continue press up.
- If you have elected to press up then you are awesome and it is time to continue on your route to being rooted. Now you will see the Android Guy “Downloading” or something to that effect. Plug your phone into your computer
- Now move to step 1d.
Step 1d. Again Warning: You will lose your phone data. Continue at your own risk.
- Press Start, on Odin once your phone is connected to your computer. Let it do its thing. Go make some coffee.
- Once it has installed the new OS go ahead and setup your “Slight used Phone”
-You ready for step 2. I think you are.
Step 2. Alright you have decide to root your phone, because you love all the options the Android OS has already provided you. But you know your phone can do more and you want more and deserve all of it.
- So first thing you need is the rooting tool and Odin if you don’t have download it. You will also need to two other additional files. SUPERSU and Knox Removal Mod Do Not Unzip these two (2) additional files.
-Now that you have the all four (4) items downloaded. Unzip the rooting tool and Odin. Now run Odin and click the AP button and find the rooting tool you just unzipped. Now let’s put your phone into download mode and connect to the computer.
- To put your phone into Download mode shut it down and hold the “Home + Power + Volume Down Buttons” until you see a Words in the upper left hand corner of the screen and a Paragraph that Say “Warning. Custom firmware Blah Blah Blah…etc. Press Volume Up to continue or Volume down to restart phone” Press up then Android guy shows up with downloading underneath him. Connect your phone at this point to the computer.
-Press start on Odin. Let it do its thing it should only take to 5 minutes at the most. Now that it is done. Shut your device completely down.
-Go to step 2a.
Step 2a. You will need a Micro SD card. Add those two other files. To the root of the SD card.
- Move to step 2b.
Step 2b. You need to put your phone into recovery mode.
- Your device should be completely shut off now. To put into recovery mode you need to hold down these buttons (Home + Power + Volume UP Buttons). You should see in the upper left hand corner of the screen text saying Recovery…
- You will see a list of options you will want to click to on “apply update from external storage” Find one of the two files you add to the root of the SD card and click. It should start to apply the update. Once that is complete. Repeat the process from Step 2b. for the other file.
- Go to Step 3.
Step 3. So you have decide you like to play risky and rooting just wasn’t cutting for you Daredevil.
- Go to “Play Store” Type into the Search bar “TWRP” – Install “TWRP Manager”
- Once it installed, Open the application, Grant the application root access. Now that the application has root access click on Menu icon in the upper left hand side. Once there go to “Install TWRP”.
- Click on “Device Name” and scroll through the device list and find the “Galaxy s5” and click it. It will then go back to “Install TWRP” page. Now press “Install Recovery” And let it work.
-Go to Step 4.
Step 4. Assuming everything for you so far has gone to plan. The next step is to install MOAR (Mother Of All Roms). Do not unzip the file.
-Connect your phone to the computer.
-Now that you have download MOAR. Move it the “Download” Folder on the SD Card. It will make easier to locate later.
- Now power down the phone and go into the recovery menu. To do this make sure your phone is off and now hold (Home + Power + Volume UP Buttons). Once there click on “Advance”, Then “File Manager”. There you will a list of options scroll until you see “external_sdcard”. Now you will see another list scroll until you see “download”.
-Now find the “MOAR” file. Click it, a couple of options will show up and press “Move”. Now a list will show up, scroll through it and locate the "sdcard”. Another list will show up, scroll through it and locate “TWRP” and press “Select” in the lower right corner and let it do its thing.
- Now go back to the Main Menu. Once you get there click “Install”. You should see the MOAR file, click it. It will take you to another screen and it will ask you to “Swipe to Confirm Flash”. After that your coffee should be done brewing and you might want to get a bagel while you are at.
If you get a couple of errors after installing MOAR, remove the battery and then stick back in and it should correct your problem.
Hi there,
Thank you for your share but here isn't the right place for such a threads. Please post your thread here:
Miscellaneous Android Development
Good luck
Thread closed

(ROOT) How to root your galaxy A20/A20e using Magisk

THIS WILL VOID YOUR WARRANTY OR MAY BRICK YOUR PHONE IF NOT DONE CORRECTLY.
I made this because i wanted to play AR games on an unsupported phone, so i want to help other people.
Follow this tutorial CLOSELY, or you'll mess up your phone
WARNING: THIS POST IS DIVIDED IN TO PARTS, IF YOU'RE HERE FOR THE A20e ROOT GUIDE, PLEASE CLICK (Coming soon)
1.0: Preparing.
1. Get your firmware from Sammobile or other sites
Get the NEWEST firmware that is from YOUR COUNTRY.
2. Download and install samsung mobile drivers.
3. Download ODIN Flash tool.
1.1: Unlocking your bootloader.
From this point on, you are taking a risk. You will void your warranty if you continue, i cant stress this enough.
1. Open the settings app, and navigate to: Device Info>Software Information and press Build number 7 times in a row. You will now have access to the developer settings.
2. Navigate back to settings, scroll down and press on "Developer settings"
3. Now, you should see a button called "OEM Unlock". PRESSING THIS WILL WIPE ALL OF YOUR DATA. (Which is normal.)
4. Go through the inital setup, and dont enter your data YET. Dont turn on wifi aswell, since youre going to wipe your data again later.
5. Now, turn off your phone.
6. When your phone is turned off, hold the Volume UP and DOWN button, and plug in your USB-Type C cable.
7. Now, hold the volume UP button for 8 seconds, until the screen changes. Press the volume UP button afterwards. Your data will get wiped again.
8. Go through the initial setup AGAIN, connect to wifi, but DONT enter your google/samsung account data just yet.
You have now unlocked your bootloader.
1.2: Unpacking your boot image.
1. Once you have the firmware, extract it using 7-Zip (Or any other extraction program).
2. You should now have a file called "boot.img.lz4"
3. Download the LZ4 Program on Github.
4. -Extract the zip in any EMPTY folder.
-Put the "boot.img.lz4" into the folder.
-Open CMD. Navigate to the folder you extracted LZ4 into.
- use this command to extract it: "lz4.exe -d boot.img.lz4 boot.img
- Done, now put the "boot.img" to your phone storage.
1.3: Patching the boot image.
1. After you copied the "boot.img" to your phone storage, open magisk manager.
2. Now, select the Install button on the TOP. Press "Patch an image"
3. Select the "boot.img" file you copied from your PC.
4. Wait.
5. Done. Copy the "magisk_patched.img" file to your computer.
6. Convert the ".img" file into a ".tar" file.
2.0: Rooting: Flashing the .tar to your phone.
Follow closely.
1. Turn off your phone, and hold the volume UP and Power button at the same time. After you booted into the recovery, select "reboot into bootloader".
2. Open odin, and firstly go to "options" and untick "Auto reboot". Then, press the "AP" Slot, and select the "magisk_patched.tar" file.
3. Connect your USB Cable, and press "start".
4. it should now say "PASS"
2.1: Rooting
1. hold the volume DOWN and Power button for 7 seconds.
2. QUICKLY hold the volume UP and Power button
3. Select "Wipe data". Press yes.
3. Now, go through the initial setup. You can now enter your data, since we arent wiping our phone anymore.
3. Final Touches
1. Download Magisk Manager again. Open it, and it will install a zip. It will automatically restart.
2. Open magisk manager. If there is a GREEN tick on the top, Well done! You've made it!
You are done with rooting your phone! you can now leave, or continue if you want to play AR games.
Other: AR Compatibility
1. Open magisk manager, press the 3 lines on the top left, and select "downloads"
2. Search "ARCore"
3. Install it, and reset your phone.
4. Now, go to the play store and install "ARCore"
5. You have AR access! Download games like "FNaF AR" or anything else.
This guide will get updated every week.
anyone can confirm this'll work?
Chiryn said:
anyone can confirm this'll work?
Click to expand...
Click to collapse
I tried it, but it didn't work. I think I downloaded a bad firmware tho. I am going to try it now. Btw. if you want an easy firm download I highly recomend Frija v.1.3.0. - only easy, fast and WORKING (at least for me) firmware downloader.
I am stuck at odin saying NAND Write Start!!.
Could anyone help me?

[ROM][A51] HAVOC OS for Samsung Galaxy A51 [CUSTOM ROM]

Hey Guys,
Before you dive in, irrespective of your reading speed read this carefully and slowly for better understanding but if you cannot focus and read it slowly then you better give up music for a few weeks.
About the Device
Before you jump in and get your hands dirty.. you should know that what you will be installing is Generic System Image, It is not specifically made for your device so if you are going to install some other GSI other than this, you might face some issues.
If you are a beginner, you should Go Through Project Treble, just for the sake of knowledge.
Also Galaxy A51 has A/B partition and Supports Project Treble though remember that Treble Devices are not same as A/B devices and Vice Versa.
Things You’ll Need
A Computer (not an iPad)
Internet [requirement around 6 gigs (4.8 gigs optional, for downloading stock Firmware, Highly Recommended)]
Samsung Galaxy A51 (will not work on A50)
Patience and a madcap attitude.
Resources
Download Odin from the link given below and extract it in a folder.
https://odindownload.com/download/Odin3_v3.13.3.zip
Adb and Fastboot Drivers
https://gsmusbdrivers.com/download/adb-fastboot-drivers/#
Samsung Drivers
https://developer.samsung.com/mobile/file/68b2dc40-3833-4a8b-b58e-32f7aca25c00
Havoc OS GSI
Havoc-OS - Browse /arm64-ab at SourceForge.net
Don’t forget to check that there is “arm64” and “ab” written on the name of the file
Other option is with Gapps (it means the rom will come with Google Play services built in
otherwise it is Vanilla Android.
GSI Flasher
(It is used for converting your img file into flashable Zip)
https://drive.google.com/file/d/1J8OlI2CCXpvAJ5FhFlR2b_y58eHQERGs/view?usp=sharing
Extract it you’ll find three folders gsi, META-INF, scripts, keep all of them inside the GSI
Flasher extracted folder.
Twerp Recovery
twrp-a51-3.5.0_10-1_ianmacd.tar | by androidhowto for Utilities (androidfilehost.com)
Do not use any other in this case you might get mounting errors.
Encryption Disabler
Disable_Dm-Verity_ForceEncrypt_03.04.2020.zip | by androidhowto for Utilities (androidfilehost.com)
Its Show time
1. Go to settings and go to about phone, tap build number 7 times and a dialog will appear, you are now a developer.
2. Go to additional setting or search developer options in the settings search bar
3. Once in the developer settings find OEM unlock and turn in on, scroll down and also turn on USB debugging, your phone will ask the permission for accessing the data by your computer.
4. Turn off your device. Get a usb cable and connect it to your computer.
5. While phone is off first press Volume UP and Volume Down together, and then then insert the usb cable into the phone while holding the buttons wait for two seconds. a blue screen will come up telling you about consequences and life choices.
6. Long press the Volume Up Button and a new blue screen will show up asking you for unlocking the bootloader. Press Volume Up to confirm. You device will erase everything and reset itself ( Don’t forget to take backup of your Data).
7. After the setup screen appears skip everything in the setup and enable developers option and enable USB debugging in the developer options.
8. Turn off your device again and Repeat step 5.
9. Press Volume up for entering the download mode
10. Now in your computer, Install Odin and open Odin.exe you’ll find your device as comm: xx
Now click on the AP button and select the twerp you downloaded.
Press start and twerp will be installed in your device. Your device will reboot don’t let it boot to one ui, press all three buttons together and hold, as soon as the screen goes black release only the volume down button. Keep holding the Volume UP and power buttons for 3 seconds and then release, you find yourself in twerp. If you miss it repeat the process again but don’t let it boot to One Ui.
In twerp press wipe => format data =>type yes. Press home button and again go to wipe advanced select Data, Cache and Dalvik and swipe to clear.
Press home again. Go to reboot and select recovery, twerp wil reboot. Once it reboots transfer the encryption disabler to your phone and in twerp press install select the storage, sdcard or internal storage, where you have stored the file, select it and swipe to install.
Now in your computer extract the Havoc os image and rename it as “system.img”.
Extract the GSI flasher, copy system.img and paste it in the gsi folder of the GSI Flasher.
Select gsi, Meta-inf, scripts and compress them into a zip and transfer into the phone.
Now in twerp Press install, select the zip file and swipe to install. Also install Gapps or Magisk if you want (though normal magisk will have problem try install phh_magisk, discussed later).
Reboot and KABLAMO You have installed Havoc OS.
Bugs
A small random issue in Auto Brightness
If you root with magisk and install modules, after you reboot your phone will get into a bootloop. Use Phh_Magisk but I aint sure if it’ll work or not Your call madcap.
NONE OF THE FILES IN THIS TUTORIAL HAVE ANYTHING TO DO WITH ME. If SOMETIHING HAPPENS I AM NOT RESPONSIBLE. ONLY DO IT AT YOUR OWN RISK.
Troubleshooting.
If you find errors in twerp, such as unable to mount vendor or system_root, or data. Then you got to install the stock One Ui Back again, therefore it is highly recommended to keep with yourself the stock firmware. You will need It. And it is 4.78 gigs. You can download it from
Model : SM-A515F - Galaxy A51 — Samfrew.com
To reinstall the stock firmware first extract it and the open odin and repeat steps 8 and 9, once your device is detected in Odin press the respective buttons and select the respective files such as for BL button select the file With BL in the name. Do it for buttons, BL, AP(once you select the file it will take long for it load into odin so do not panic and let it load, it might become unresponsive but use patience and wait.)CP , CSC. Click on start and you’ll have ONE Ui back on your device.
To Lock the bootloader repeat steps 5 and 6.
If you still want more stability and Control You can install a different Kernel NDataX from (@Hendamanu) https://forum.xda-developers.com/m/hendramanu.11224917/
Thanks for your contribution

Categories

Resources