Database Info

[18/06/2012][ROM]photonic CM 7.2 - 2.6.35

photonic CM 7.2​
What is Photonic ?​
Photonic is a unofficial port of Cyanogenmod, almost AOSP Version 2.3.7 - photonic kernel 2.6.35 Changes are minimal, sources are open. For further information visit github or official Cyanogenmod on the web!
Sources are written to support NAND Boot (a replacement of Winmobile ROM incl. bootloader & recovery system) and SD-CARD Boot (classic boot from winmobile via haret)​
- Current Status -
bugged/not working:
these will be fixed in later releases
HQ/HD Video Playback
Video Recording
Audio via Bluetooth
FM Radio (Neither Headset nor Speaker)
Headset Stereo
what should be fixed before next release:
when list is finished next release will be uploaded
Battery driver (started but not finished)
History
18/06/12 - r10
Bootloader with new Partition-layout: Increases Phone Storage Size DONE!
Cut screen DONE! by derefas
update to latest official CM7 sources
ARM11 not going to suspend and causing battery drain DONE!
WIFI Stability and Tethering DONE!
23/01/12
Rewritten wifi_nvs driver to get device specific calibration data and real mac address on NAND DONE!
GPS driver DONE!
Hundrets of lines of unlisted fixes like several clock, dsp, audio, data transfer, wifi, bt and code fixes DONE!
downloads:
(feel free to link to the downloads, but please DO NOT MIRROR! If you're having problems with downloading the files ASK ME!)
NAND-Boot:
1. Files for SD-Card - (needed to boot into fastboot to flash lk for the first time)
2. Files for PC - (contains new bootloader&recovery, fastboot and drivers)
3. Update.zip file - (is the main build file)
3. latest GAPPS - (Google Apps like Market etc.)
Click to expand...
Click to collapse
SD-Boot:
not updated to r10, yet
1. SD-Pack - Mirror 1 - (all in one)
Click to expand...
Click to collapse
EXPERIMENTAL UPDATES:
1. r11 - infos see GooManager
Click to expand...
Click to collapse
- Credits -
cotulla - for his initial 2.6.29 kernel port
Alexander Tarasikov - for his initial lkbootloader
the whole xda-photon people for the common project
- Disclaimer -
This product is free to use at your own risk. We take no
responsibility for any conflict, fault, or damage caused by
this unlocking procedure. No warranties, implied or otherwise, are given if you agree to use this product.
No problems were found while testing this product on several different devices, your experience may vary.

Instructions for a clean! Installation: NAND-BOOT
This procedure will wipe all your data! So backup your content before you continue!
STEP 1: Installing LK Bootloader & Recovery
(If you have already installed a NAND version, you can skip the haret boot part, but it is very important to flash the new bootloader from lk-photonic-pc-r10.rar!! It contains important changes for wifi calibration!)
Download all files for NAND (see downloads)
Extract lk-photonic-pc-r10.rar to somewhere on your PC
Copy cm-7-20120618-UNOFFICIAL-photonic-r10.zip, the GAPPS file and the content of lk-photonic-sd.rar archive to the root of your sdcard and run HaRET from your device
The device should boot to the fastboot prompt. Connect the USB cable
If your connecting your phone for the first time to your pc you may have to install drivers from the folder you have just extracted.(See also here) You can see it in your windows notification bar if you were sucessful. Be sure to have already run haret and already being in fastboot console on the device when installing drivers! If you are sill having problems to connect to the device via fastboot try installing HTC Sync (from htc website)
Enter the Fastboot-folder on your pc (the one you have extracted) and run start-photonic.bat
Choose Option "1" to flash Bootloader AND Recovery. The Batchfile will lead you. (Choosing CWM Recovery is recommended)
If everything went fine choose Option "4" to reboot your deivce, now on HTC Bootscreen press and hold "Volume up" until you have entered the Recovery
STEP 2: Installing the build
(Once entered CWM Recovery you can control the menu with vol-up and down buttons, power button=enter)
First, go to "mounts and storage"-menu and Unmount any partitions that can be unmounted (most likely, cache)
Next, in "mounts and storage"-menu, format System, Data, Cache and Boot partitions
Next, go to recovery main menu and select install zip from sdcard, then select choose zip from sd card
Choose the cm-7-20120618-UNOFFICIAL-photonic-r10.zip
Once done do the same to install GAPPS
Select reboot system now
Get some coffee and wait for the device to finish the first boot
Hopefully your are done now and should see the setup wizard!
Feel free to remove any of the files from SD-Card now, they are not needed anymore
Click to expand...
Click to collapse
Instructions to UPDATE from a previous Photonic Release
This should keep your old photonic data
These Instructions are related to the previous one!
DOWNLOAD cm-7-20120618-UNOFFICIAL-photonic-r10.zip, GAPPS and lk-photonic-pc-r10.rar
Extract lk-photonic-pc-r10.rar to somewhere on your PC
COPY the update-zip and GAPPS to your SD-CARD
Boot into CWM Recovery: While in Android press and hold "Power" Button, choose "Restart", then choose "Recovery". Device will reboot in Recovery now. You can also simply boot up the device and hold "Volume up" button when HTC logo appears.
Choose Option "Backup and Restore" and let it do a full Backup.
Reboot the device and press "Volume down" to enter Fastboot mode
Run start-photonic.bat on your PC from the folder you have it extracted to
Choose Option "1" and install new Bootloader and Recovery and follow instructions
When finished reboot and enter Recovery again with holding "Volume up" when HTC logo appears
Format boot, cache, system and data partition im "mounts & storage"
choose "backup and restore" again, but NOW you restore your previously saved backup!
Next, go to recovery main menu and select install zip from sdcard, then select choose zip from sd card
Choose the cm-7-20120618-UNOFFICIAL-photonic-r10.zip
Once done do the same to install GAPPS
Reboot the phone and be happy with the Update!
Click to expand...
Click to collapse
Installation Instructions for SD-BOOT
Download file for SD-Boot (see downloads)
Copy the content of the archive to the root of your sd-card
Run Haret from your device
After several minutes(up to 10 minutes, screen looks like freezed!) CM7.2 Splashscreen should appear and some minutes later you should see the Setup Wizard!
Give it some minutes then to finish installations in backround before you continue
Click to expand...
Click to collapse
How to go back to WinMobile NAND-BOOT
Download official Stock ROM for your device from HTC Site. Take care of the language and provider brandings! It will only one work for your phone! If you have really no idea which one to take you can contact their support, they will help you!
Start the Utility you have just downloaded
Be sure to have enough battery power, at least 50% !!
Unplug/Plug battery of your phone, press and hold! Volume down then press power button
You should have entered 3-Color Screen now, plug the phone with your computer and start the tool! wait for the progress beeing done
If you are having problems with connection while flashing do it this way!
Click to expand...
Click to collapse

Version tracking and Following EXPERIMENTAL BUILDS
You may have noticed that i added some version tracking:
The "-rX" in the filenames show the growing release number (Example: -r10)
I removed ROM Manager and added GooManager instead, you can browse the files on the phone, checkout and install experimental updates etc. It will also let you know if there is an update!
In the "Photonic" Folder there are two other folders: EXPERIMENTAL and RELEASE
RELEASE is thought to be main, most stable and tested version, that most people should use. Experimental updates will only be included after heavy testing there
EXPERIMENTAL is the storage for brand new tests on kernel and the android build, i will write the changes to the changelogs for the files so you can decide if you want to test it
In most cases its "safe" to install experimental updates, feedback to them (using this forum thread) can really help me with developement.
People that did hard to install the Photonic Release itsself should not try to test them.
Click to expand...
Click to collapse
When having problems with the drivers
To install the Android USB driver on Windows 7 for the first time:
Connect your device to your computer's USB port.
Right-click on Computer from your desktop or Windows Explorer, and select Manage.
Select Devices in the left pane.
Locate and expand Other device in the right pane.
Right-click the device name and select Update Driver Software. This will launch the Hardware Update Wizard.
Select Browse my computer for driver software and click Next.
Click Browse and locate the USB driver folder.
Click Next to install the driver.
To install the Android USB driver on Windows XP for the first time:
Connect your device to your computer's USB port. Windows will detect the device and launch the Hardware Update Wizard.
Select Install from a list or specific location and click Next.
Select Search for the best driver in these locations; un-check Search removable media; and check Include this location in the search.
Click Browse and locate the USB driver folder.
Click Next to install the driver.
Click to expand...
Click to collapse

First one!
Thanks for all your work!!!

Looks great! Thanks mate

Really looking 4 a release..amazing
Sent from my Nexus One using XDA App

That souns very nice, hope a first download will be ready soon....
You will get it

Thx, Schlund!
Sent from my Desire HD using XDA App

Great the thing which is most needed is BATTERY DRAIN issue and Thanks for working on it
Good Luck

I feel I can only put this ONE way:
The Pointer Sisters....
http://www.youtube.com/watch?v=h-LbvFckptY

awesome guy! schlund we love u!

gps done! amazing!

thanks schlund,i hope you successfull.
one other problem that screen android is cutting!
please fix this problem.

Happy new year! Many thanks for your hard working !

milan7171 said:
one other problem that screen android is cutting!
please fix this problem.
Click to expand...
Click to collapse
good idea, gonna add this to the list!

I'm really looking forward to this one! Don't really like the SD Rom thing with pretty heavy battery drain.
Can't wait for yours! Awesome work!

youkid90 said:
Happy new year! Many thanks for your hard working !
Click to expand...
Click to collapse
yeah The Spring Festival!
since gps wifi gprs work perfectley,how about releasing this edition?
We are eager to try this !
ps: battery can be satified by some battery sofware in android...

This thread is a good idea! Keep on rocking Schlund!

. Thanks. I'm waiting for testing Nand version

Looking forward for the NAND version!!

[Tutorial]"Noob Guide"[Tutorial]

Hi,
I made a step by step tutorial
for the new ones in this forum
for our LG O3D
Post if I had forgotten something
so here we go:
ROOT:
THIS WORKS ONLY ON FROYO AND GINGERBREAD V21A
THERE IS ANOTHER WAY I WILL ADD SOON
At first, before you can do anything special
is to root your phone.
You will need.
Froyo/V21A:
SuperOneClick
Gingerbread:
Megatron
LG USB Drivers
Froyo:
Video (it isn't my video!!!):
http://www.youtube.com/watch?v=5biS7DYqtLQ
Text:
1. Install the driver (it isn't shown in the video!)
2. Enable USB-Debugging on your phone (Settings-->Applications-->Development-->Activate USB Debugging)
3. Unzip the SuperOneClick package and run the exe as Admin
(Maybe you have to disable your Virus Scanner)
4. Connect your phone to the computer (No USB-HUB!)
5. Wait till the computer has installed the drivers.
6. Press Root in the SOC-Tool
7. Your phone will reboot between the root progress.
8. You have Succesfully rooted your Phone,
and you can now use apps witch requires root!
Gingerbread
Text:
1. Install LG ADB drivers
2. Put the device in USB debugging mode
3. Connect via USB
4. Extract the zip file
5. and execute run "run.bat”.
Credits go to Dan Rosenberg
INSTALL CWM-RECOVERY
Before you can install a ROM you need CWM-Recovery.
Video (It is my video):
http://www.youtube.com/watch?v=BChCSyPEfd0&feature=youtu.be
Text:
1. Install the free app Rom Manager from the Play Store
2. Start the app.
3. Press Flash CWM
4. Select the LG Optimus 3D (No Other devices from LG!!!)
5. An window will be opened witch
asks you if you want to give Rom Manager
Superuser rights, give it.
6. Wait till the progress bar is full.
7. You have no CWM-Recovery
BACKUP
If you want to install a new ROM all apps
will be lost so you'll need to backup them
Video:
http://www.youtube.com/watch?v=Hbz8-HkH0Lg&feature=youtu.be
Text:
1. Download the free app Titanium Backup
from the PlayStore.
2. Open the app and give it SU-rights.
3 Follow the video because I can't say
it in english
INSTALL NEW ROM:
Here in the forum are many
ROMS you can try...
1. Download a rom from the Forum. (Dont rename or unpack it!!!)
2. Put it on your Phone.
3. Open Rom Manager
4. Select Reboot to recovery.
5. The Phone will rebbot and you'll see an menu.
You can move with the volume kays and
select with the search button and go back
with the back button.
6. IMPORTANT!!!!:
Go to Backup and Restore
Select Backup and wait till it is ready.
7. go to the main menu with the back button.
8. Select Wipe Data/Factory Reset
9. Select Wipe Cache
10. Go to the install zip menu
11. Press install zip
12. Select your zip.
13. Reboot your phone when it is ready
14. Your done !
----I have not much time now so there will be only videos----
----Post if text is needed a reply----
RESTORE APPS
http://www.youtube.com/watch?v=LHB5-9zoqNU&feature=youtu.be
If you want to restore faster you need the permium version
or the second way to restore apps
RESTORE APPS
This method is faster than the free version
of Titanium Backup but there could be problems
like force closing apps or annoying stuff like this
1. Boot into recovery with Rom Manager or
shut down the phone and press volume down +
3d + power (sometimes a little bit tricky)
2. Go to backup and restore and select advanced
restore.
3. Select the backup with the apps you want to restore.
4. Select restore data.
5. Reboot
INSTALL NEW KERNEL/OVERCLOCKING
1. Download a Kernel from the Forum (Titan Kernel is great!!!)
2. Boot into reckovery
3. !!!Make a Backup!!!
4. Select install zip
5. Select the zip
6. Reboot
After that you can take a look on this:
http://forum.xda-developers.com/showthread.php?t=1592110
/////////////////////////////////////////////////////////////////////////
More things will be added soon!!!
If there are any questions you can post it
here. I will not answer on PMs or E-Mails!!!
You can post requests too.

Changelog
Changelog 05.01.2012
added Gingerbread root.

problem restoring
Hi ive recently ran into problems with my O3d and i need to do a recovery on it. I had rom manager on it and i backed up everything before it went wrong but now all my apps and games and stuff has gone including rom manager!!! Ive also tried the volume down and power button but i cant seem to access the restore part of it only wipe data/factory reset. I know all my stuff is still on my memory card though which makes it the more frustrating lol. Is there anything that can help me with this or is it a case of I just have to start again??? Any help would be grateful. Cheers

taffy2502 said:
Hi ive recently ran into problems with my O3d and i need to do a recovery on it. I had rom manager on it and i backed up everything before it went wrong but now all my apps and games and stuff has gone including rom manager!!! Ive also tried the volume down and power button but i cant seem to access the restore part of it only wipe data/factory reset. I know all my stuff is still on my memory card though which makes it the more frustrating lol. Is there anything that can help me with this or is it a case of I just have to start again??? Any help would be grateful. Cheers
Click to expand...
Click to collapse
You could install a new rom using kdz method then root it then install clockwork recovery then enter clockwork recovery and restore

Hello...
Nice guide you have. Overlaps with manbearpig's somewhat, but you have the video tutorials
For flashing CWM, I recommend using this instead. Prevents the common problem where ROM Manager shows LG Optimus 2x rather than Optimus 3D and the user flashes it anyway, bricking/bootlooping the phone.

You have only included installation of custom roms, You may add installation of stock roms by kdz method. first do this http://forum.xda-developers.com/showthread.php?t=1473781&highlight=kdz then http://forum.xda-developers.com/showthread.php?t=1287236 and get kdz from here http://lg-phone-firmware.com/index.php?id_mod=2

thanks for the posts I will add this tomorror or in a few hours because I am now online with my phone and it is to much to write

Stunningkun said:
You could install a new rom using kdz method then root it then install clockwork recovery then enter clockwork recovery and restore
Click to expand...
Click to collapse
Nope tried that method and still the same??? I spoke to someone from lg and they said theres a method of doing it through my googlemail account but I'd have to send the handset off??? Any ideas?

so u r on a stock rom which is rooted and you dont seem to be able install cwm and by pressing volume down and power you are entering default android recovery...right
have you tried this http://forum.xda-developers.com/showthread.php?t=1482713 for installing clockworkrecovery?

BLU Quattro 4.5 rom list and how to instructions

Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!

Internal Memory
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/

TechSoft said:
Found this online. *****this is not my work****** All credit goes to the author quattrodevelopment.blogspot.com
Here is a step by step with roms included for the 4.5 quattro Not the HD or 5.7 HD maybe soon.
Disclaimer: These ROMs/Recoveries are only intended for the BLU Quattro 4.5, or the K-Touch v9(which is the chinese version) These WILL NOT work on the 4.5HD or 5.7HD devices(I will release ROMs/Recoveries specifically for your device at a later time)
Drivers: https://copy.com/BUMmsS9rhLJe
English Recovery: https://copy.com/XZxTDht2lQiz
Gapps(4.2) https://copy.com/utkbZgwRpsVB
Gapps(4.1) https://copy.com/pSd8SsqU9pdI
ROMs With Less Bugs: MIUI v5 (4.1) https://copy.com/sbmcN6PHwFfi CM/AOKP Hybrid? JB (4.1) https://copy.com/VeLz1VLbkNNI Shendu ROM 4.1(Modified/Tweaked by me) https://copy.com/NwiFnlO8JAek
ROMs With More Bugs: Cyanogenmod 10.1 (4.2) https://copy.com/8kt2EAU2ll8y
1- Download the drivers from link posted above, and extract it to the folder of your desire. Now turn the phone off, and hold Vol+ (volume up button) and Power button at the same time until you see a green screen, then release both buttons immediately. You should now be in APX mode(nvflash) it will be a black screen
2- Connect phone to computer via usb cable. Now you should get a pop-up window about installing drivers, you're going to want to choose to browse computer for driver software manually. Then choose let me pick from a list of device drivers on my computer, and click have disk. Now you're going to browse to the location where you extracted the drivers to, and click on it(Ignore warning if it pops up, and choose install)
3- Assuming everything went as planned, now download the recovery and extract it to the location you desire(must be in a directory that you can issue adb commands from) inside of that folder, locate a file named recovery.bat. Double click on that file and a command prompt with a bunch of chinese pops up. Give it a second and press enter, it will go through the process and flash a recovery onto your phone
4- After everything is done, hold down the power button for about ten seconds(until the device powers off) Power the device back on normally, and download the ROM/ROMs if you haven't already and place them on the internal or external sd card(your choice) With device connected to pc, open command prompt and type in "adb reboot recovery" (without quotes) and the device will boot into recovery mode
5- Now that we have an English recovery, the translations below aren't really needed. However, I'm going to leave them up for a few days, just until everybody can transition to the English recovery. They will be deleted after that!
Recovery Main Menu: -Reboot -Install from SD card -Wipe Data/Factory Reset -Wipe Cache -Backup&Restore -Mount/Format -Advanced
Install From SD Card Menu: -Install zip from external SD -Apply update.zip -Unknown* -Install zip from internal SD
Backup&Restore Menu: -Backup -Restore -The rest are unknown*
Advanced Menu: -Reboot Recovery -Wipe Dalvik Cache -The rest are unknown*
To install ROM- In recovery mode, Factory Reset/Wipe Cache/Wipe Dalvik Cache. Then choose install zip from sd card(then choose internal or external and locate the ROM you want to install) After that you need to do the same thing to install the gapps package(you need the gapps package for google apps to function) once all is done, reboot and wait(it takes a while to boot the first time after flashing new ROMs, it has to rebuild the Dalvik cache)
NOTE: In case you aren't familiar with flashing ROMs, once you click on something( "backup" for example) a menu pops up pretty much asing you if you're sure you want to do that. It will have a bunch of lines of the same thing(which is no) and then one of the lines will have a bunch of writing beside it(which means yes). Also BEFORE you flash any ROMs, make sure you factory reset/wipe cache/and wipe dalvik cache, then you can flash the ROM and gapps package
*These will be updated regularly, as I discover what they are **More ROMs to come!
Click to expand...
Click to collapse
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!

alanfrank said:
The "BLU Quattro 4.5" has 4GB internal memory partitioned into 0.98GB for ROM and apps and an internal usb-memory of 1.63GB.
Is it possible to merge or resize the partitions?
I have 16GB external SD so the 1.63GB internal reserved usb-memory is useless and I still having trouble out of space in primary partition.
Thanks and sorry my english =/
Click to expand...
Click to collapse
I've found this: http://forum.xda-developers.com/showthread.php?t=1171531
Any idea if this can be used with another phone them the LG one he have used in the guide?
I cant post in the thread because Im new user here =/

problem
I have done everithing you said, and my cell freezes on boot forever, now what????

BLU Quattro 4.5 HD & 5.7
Need to know how to restore both devices to stock. Any aplication ODIN like to restore it back to stock from the download mode?

Please help me root, i try binary method but i just get boot loop.

Recovery + Root My experience
Hello... I got my BLU Quattro 4.5 (D440) a while back, didn't fuzz with it much right off. The Stock ROM was sluggish at best thought there was even an issue with the Digitizer/screen. But this thread was extremely helpful. I am now running Shendu ROM 4.1.2 one of the suggested ROM's above. I tried the other 2 first and they were mostly in Chineese and I had an especially hard time getting them switched over to English. Either way onward to the point. I have put together a few helpful tips-tricks for my experience with this phone and its phoenix transition to an awesome handset. Thats right now this is my daily driver and I love it! See below hope its helpful.
BLU Quattro 4.5 (440D) GSM Recovery+Root
These steps for this phone only!! Not responsible for any issues.
1. download ROM's, Recovery, & Driver from XDA (this thread)
http://forum.xda-developers.com/showthread.php?t=2327417
2. Enable USB Debugging! Go into Apps-Settings-DevOptions - Check box for USB Debug
3. Have original USB cord if handy! I tried with a Samsung OEM cable but no luck getting drivers to stick. Use original is best. (If you have one.)
Plug in USB Cord to PC then Phone and see if windows detects drivers. let it. It wont get the ones u need later, but what it does find is for USB storage. (you can move over your ROM's/Gapps to storage, downloads folder is a good spot).
4. Go to... http://junefabrics.com/android/downloadold.php to get pdanet software. Install it and it will give i the right drivers for ADB support. I used 4.01 to match the android version currently on my phone.
5. Extract the Driver provided from XDA. Put it in a folder with the ADB commands. Or you can get it all here... http://downloadandroidrom.com/file/GalaxyNexus/rooting/GalaxyNexusRootNew.zipn <-- I know this isn't for BLU but, if you extract this to a folder, and also add the drivers extracted to it as well this works! I've done it.
6. Extract the English Recovery to the same folder.
7. Turn off your phone. Hold down Vol up and Power button for about 5-9 seconds. Once you see a green screen let go of both. Screen may flicker then go black but the icons at the bottom will stay lit. You are now in APX mode (nvflash) mode. (as stated above in original post)
8. Check your Win 7 PC device manager. For a Phone device with ADB. If you you may need to update driver with the one that came from XDA, but the PDANet software should make it work.
8. Go to the folder and find Recovery.bat file (may have Chinese in file name. Double click and a command prompt window will pop up with a bunch of unknown characters, wait 5 sec then hit enter. The batch file should take of pushing the necessary recovery through ADB to the phone. It will error if it can't.
9. If completes OK. Push power for 7-9 seconds to power off the phone. Hit power like normal to turn it back on. It will boot up like normal (or it should).
10. USB is still connected this whole time and you can open a command prompt window. Navigate to the folder you placed the Recovery into. Something like user/username/desktop/BLU/recovery..etc)
Type ADB devices....it should show you that is is connected to your device. Then type " adb reboot recovery " and the device should reboot, give it some time.
11. Once in recovery. Best to do a backup of the original ROM & system. that way you can get back into recovery if anything goes wrong and wipe out the problem by restoring and starting again.
After you backup === you can get into recovery without the command being typed in or even being connected to your PC.... By holding Vol up + Power till you see the green screen then let go of power but keep holding Vol up till you see the BLU Products boot screen then let go ===
Clockworkmod Recovery should be on your screen.
you can reboot phone now and get back to original with no changes. Or you can venture into the world of loading ROM's (There in your downloads folder if you saved them in Step 3)
ROM 101
BACKUP-BACKUP-BACKUP 1st thing once in Recovery ...can't stress enough how much of trouble you can keep yourself out of by keeping an original backup.
As I stated before the Shendu ROM + Gapps is running smooth and all features I've been trying are working flawlessly!! Thanks to original post for getting me going. Just thought I'd add my 2 Cents.

Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)

Altomugriento said:
Ok, here are the BEST 2 ROMS for this Phone:
Android 4.0.4(close to vanilla) : MEGA
Cyanogenmod 10.2 (Android 4.3.1) : (some audio and video issues, in BETA version ) MEGA
Need to merge internal partitions ? (merge memories) this one really "resize" the partitions (first one 1,7GB, another one new size is 2Mb) the flash.cfg file you need to flash:
This phone dont have notificaion led, fixed with this app: MEGA (flash the botton menu buttons)
Click to expand...
Click to collapse
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks

dinizbruno said:
Can you explain the merge memories procedure? it will be reaaaaally needed!!
tryed from a spanish forum with no luck
thanks
Click to expand...
Click to collapse
Do you try the procedure posted in 3dgames . com . ar? ( its my work translated from the 592zn page, all the credits for the chinesse people)

Anyone tried the K-touch V9 kit kat in the BLU??
www
needrom
com/
download/
k-touch-v9-miui-v5-kk

Yes, those roms (v5) are very slow. Just use the 4.0.4 stock.
I want to try the JB stock, but i can´t find the official one anywhere.
Blu quattro 4.5 official rom to download, after you delete the bloatware and put a nice and clean theme you´ll get a nice speed.

orig D440 (quattro 4.5) rom
You can find the rom on google plus under BLU Products Development search for the model!
Hope that helps. I took your advice tonight and I am back running old school. Works ok husfar

I need phone.apk of this rom for Blu Quattro
Trozzul said:
Please rename this For Others Such as [GUIDE]BLU Quattro HowtoRoot/Rom list. Thanks for the awesome Guide!
Click to expand...
Click to collapse
I need phone.apk for blu quatro
please send me the file
[email protected]

[Q] ZTE V5 Red Bull V9180 WCDMA 2GB RAM, 8GB ROM- root, cwm

So by today (22.09.2014) is your phone oficialy renamed from "ZTE Red Bull V5" to "ZTE V5"
POSTING A PROBLEM
If you have some sort of problem with your device please please get us this info, so we could help you:
1-what rom/firmware are you using
2-what recovery
3-if you have rooted your device
4-what caused the problem
5-step by step description what you did before the problem shows up.​
Hi i just made this thread to make a base for everyone who bought this (form me) superb phone.
So far we got root, custom recovery, and many chinese roms (based on Nubia UI, Color OS, LEWA OS, FROG OS...).
There are Mokee AOSP 4.4.4. rom in develpoment and CM11 in development, CM12 also.
2015.02.13 - Latest firmware is 1.17 (andorid 4.4.2, nubia UI2.5.1)!!!
Changelog(google translation from chineese):
-optimize the signal problem
-solving open U disk mode or restart the phone, ringtones revert to the default issue
into the video again, this video from one schedule to start playing the video
-update time management software, to solve the problem of the shutdown alarm clock does not ring
-media library interface, Pictures Pictures folder appear as a blank
-to use the gallery under OTG open unsupported file error
-switching to the media library interface, multiple exposure, suggesting that language View screenshot untranslated
-save the video recording status suspended again after recording, the Pause button to display the error
-optimization manually Focus
-video recording in the recording pause again, long display of detailed information is incorrect
-horizontal screen - portrait - horizontal screen operation, not full screen
-video player interface to open the USB mass storage press the return key error
here is link to my google drive. It contains stock roms from 0.50 to 1.12, GAPPS ect. Also contains tools to root and flash custom recovery.
MY GOOGLE DRIVE ZTE V9180 FOLDER
In my Google Drive there is also two custom recovery CWM and TWRP (thanx a lot to FAZERGOO from 4PDA.ru, here on XDA it is fazerg, so please thank him for his work)..the script in my root+recovery folder is updated, so you have option to flash CWM (6.0.5.1) or TWRP (2.8.0.0.)
here is list of commands you can dial in dialer and get some hidden menu and settings:
*#06# - displays IMEI
##36 - update server settings for OTA
*#*#4636#*#* - display phone information, battery information, battery history, usage statistics, WiFi information
*#406# - touch screen calibration
--proximity sensor calibration--
*#777# - no cover of proximity sensor
*#776# - cover proximity sensor with hand 2-5 cm above..so the bar is in the green
*# 405# - MHL test
to go to recovery you have to poweroff the phone and hold "vol+" and "power" for 2 sec
to go to safe mode....???
best resources for ROMS (chinese sites):
bbs.anzhi.com
www.tdbeta.cn
www.ztehn.com
And of course our friends from Russia thread:
www.4pda.ru
proDOOMmans mega drive where you can find all Mokee, CM11, PAC roms:
HERE! and dont forget to hit THANKS button for everyone who develop and help us to use this device!!!!
TIPS & TRICKS
-HOW TO CHANGE LCD DENSITY and switch to phablet UI!!! Beware, the camera app is little bit smaller then the screen, becaouse of the density, but still works well.
-HOW TO ADD ONE HAND FEATURE
-did you know that when holding home button on locked screen lights a flashlight?
-when you double tap home button on locked screen the time changes to media player controls?
-when you tap several times on any home screen your glas will broke?
-when you zoom out with two fingers on any home screen you will get into screen manager?
-in alarm clock app there is setting "power of alarm", when turned on, you can turn off your phone at night and the phone turns on by itself in the alarmclock time and wakes you up?

complete guide by navin_n
People always asking again and again on flashing ROMs, Recovery, GApps, Root etc. So, I have made detailed step by step guide for this. Hope now it will be clear to everyone for these processes:
BEFORE YOU DO ANYTHING FROM FOLLOWING, PLEASE MAKE ANANDROID BACKUP, BEST WITH TWRP!!!​BECAUSE TWRP CAN MAKE BACKUP INCLUDING PRESIST AND MODEMST PARTITIONS!!![/CENTER]
GUIDE TO FLASH STOCK ROM:
NOTE:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding
2. Ensure that Phone Battery is at least 40%.
3. Downloaded required STOCK ROM.
4. Phone with Stock Recovery.
STEPS:
1. Copy the downloaded zipped STOCK ROM to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. In the Stock Recovery, perform wipe data/factory reset and wipe cache partition (In the menu, use +/- volume keys to scroll up/down & power button for confirmation).
5. Depending on which SD card you have copied the zipped STOCK ROM, choose "Apply update from /sdcard" or "Apply update from external /sdcard" accordingly.
6. Select the zipped STOCK ROM to flash.
7. Wait until you get the confirmation of successful flashing.
8. Reboot the phone by selecting "reboot system now".
9. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL CUSTOM RECOVERY + CUSTOM ROM:
AS FOR CERTAIN REPORTS IT IS STRONGLY RECOMMENDED TO FLASH CWM RECOVERY IF YOU HAVE 1/8 VERSION
REQUIREMENTS:
1. Be sure to backup all important data (contacts, messages, call records, etc.) before proceeding.
2. Working Windows PC with ADB Drivers installed - without proper installation of drivers the process will not be successful.
3. Ensure that Phone Battery is at least 40%.
STEPS: (If you need only Custom Recovery, then follow the steps from 2 to 7, other steps you can skip)
1. Download the required zipped Custom ROM and copy it to the root directory of External SD card or Internal SD card.
2. Download the Recovery Tool zip file. (Link to download the Tool) . Make sure to download whole files. After that copy the zipped file to the root directory of C:\ or any place you prefer and then unzip the downloaded file.
3. Enable USB debuging mode. ("Menu Button" >> System settings(Settings) >> About phone(On the phone) >> Tap 6 times on Build number>>"Back button">> More >> Developer options >> Enable USB Debugging)
4. Connect the phone to the PC.
5. Go to the folder where you have unzipped the Recovery Tool file, and then execute the batch file "run.bat".
6. In PC, new window will open. Input your choice of Custom Recovery accordingly.
7. Follow the steps on-screen until all completes.
8. After completion, in the Fastboot menu, select "Boot recovery".
9. If the Custom Recovery was flashed succesfully, you will get CWM or TWRP recovery menu.
10. Perform wipe data/factory reset and wipe cache partition.
11. To flash the firmware: Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the ROM, external or internal >> Select Custom ROM >> Click Yes to flash selected ROM.
12. Wait until you get the confirmation of successful flashing.
13. Reboot the phone by selecting "reboot system now".
14. DONE. (Initial boot may take some time so have patience.)
GUIDE TO INSTALL GAPPs & ROOT:
REQUIREMENTS:
1. Backup all important data (contacts, messages, call records, etc.) before proceeding, if necessary.
2. Requires CUSTOM RECOVERY.(Mandatory)
STEPS:
1. Download appropriate flashable zipped GAPPS & ROOT files and copy it to the root directory of External SD card or Internal SD card.
2. Power-off the phone.
3. Put the phone in the CWM or TWRP Recovery Mode and for this you need to press Vol+ and Power button at the same time for few secs and then release the Power Button.
4. Flash the zipped files (one at a time): Select "Install ZIP" >> "choose zip from sdcard0 or sdcard1" depending on which SD card you have copied the file, external or internal >> Select Zipped File >> Click Yes to flash selected file.
(No need to do wipe data/factory reset and wipe cache partition)
5. After successful flashing, reboot the phone by selecting "reboot system now". If it ask to fix the permission when you reboot, select Yes.
7. Wait until you get the confirmation of successful flashing.
8. DONE. (Your phone will have GApps and Root Permission)
and don´t forget to hit thanx button to @navin_n, @fazerg and me maybe @DallasCZ

APPS taht can be remover (thanx navin_n)
If you have already Rooted your device then you can easily uninstall the system apps using "Root Uninstallers" available in Google Play.
However, for me , i prefer to use Root Explorer and delete the apps from system folder. The following apps are safe to delete but still i advise you to backup the files before deleting. If you use Root Explorer, make sure to change attribute of the system folder from Read Only (R/O) to Read Write (R/W) when deleting.
Be ware you make it on your own!! If there is also odex file, delete them too!!!
APPs that can be deleted:
folder --> /system/app
nubia_account.apk - only if you log in in nubia account (maybe you need this to use themes)
nubia_Calculator_v1.2.1.apk - calculator app (i dont like it so i installe another one and delete this)
nubia_Calendar_v1.0.apk - nubia calendar app
nubia_ClockWidget.apk - clock widget
nubia_Music.apk - nubia music player
nubia_myfile.apk - nubia file manager
nubia_NBSecurity.apk - nubia antivirus and system cleaner
nubia_NotePad_v1.1.5.apk - nubia notepad
nubia_zbiglauncher_v2.0.apk - nubia launcher for old people (everything is biiig)
NubiaPlatLogo_V1.0.0.apk - nubia lanim showing when you tap on NUBIA version in "about phone"
ZAppDataBackup.apk - nubia main app for backup your phone
ZDataBackup.apk - nubia backup app
ZQuickSearchBox.apk - nubia quick search box (if you install GAPPS it contains original google search box)
ZVideo.apk - very basic media player
If you dont use Live Wallpapers you cen delete the main app:
LiveWallpapersPicker.apk
and of course all livepaper apks
BasicDreams.apk
HoloSpiralWallpaper.apk
LiveWallpapers.apk
MagicSmokeWallpapers.apk
NoiseField.apk
PhaseBeam.apk
folder --> /system/preset_apps
TP_360AppStore_1.9.203.apk
TP_360Video_1.2.0_Nubia.apk
TP_BaiduInput_1000541a.apk
TP_baidumap_6.2.0.apk
TP_baiduvideo_5.3.0.apk
TP_gowhere_1044_131118_150501.apk
TP_iReader_2013122410.apk
TP_JdAndroid_2.6.0.apk
TP_QQ_4.2.apk
TP_QRCodeScaner_v1.0.apk
TP_tieba_5.5.2.apk
TP_Weibo_4.0.0_602.apk
TP_weixin_502.apk

Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2

DallasCZ said:
ROOT
the only way to root it so far is to run an Chinese exe, which will root your phone and install superuser (chinese one). Then you need to uninstall the superuser and install one from google play.
CWM
so far there is only chinese CWM 6.0.4.6..looking for someone who can make it english.
Click to expand...
Click to collapse
Hi, can you please provide me the exe file to root and explain me the process to root? I would be really grateful for your help! Thanks
I have WCDMA/GSM V5 3G 9180

ROOT CWM
Hello,
i made a simple bat file, which will root your phone, install custom recovery or original recovery.
here is the link: Dallas Google Drive.
you made everything on your own ..i am not responsible for any phone software/hardware damage.

jday17 said:
Hi, I'm interested in buying this phone.. Could you tell me your first impressions?
It seems very good but I can't see any support for it, even if it has a Snapdragon 400..
Sent from my VOTO X2
Click to expand...
Click to collapse
Hi,
there ar ea lot of Chinese phones, this phone is ment to be sell china only.
There are many forums but in Chinese.
I wrote a little review on gizchina.cz (is in Czech language,so use google translator)

TIP
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery this package, then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.

DallasCZ said:
For new users i recommend do this:
-boot your phone and see vhich version of formware you have (latest at this time is 0.50).
-If you have 0.44, then go to dialer and dial ##36. You get to the menu where you can select which server will be used for updates (at this time is 0.50 only for few people for feedback). then go to ybout phone and tap serach for updates and you get the update.
-after update is installed, go to about phone and tap 5times "build number" line , go back and go to "more" and "developer option" and turn on usb debugging.
-launch my root.bat, select root your phone and th ephone will reboot to bootloader and will be rooted.
-now you can install custom recovery (from my bat.file) it is bilangual CWM 6.0.4.9 recovery. Everything works fine as i used it.
-now after root and cwm recovery installed, make backup of your 0.50 rom and then you can proceed to delete bloatware (a lot of bloatware).
for rotted phones with CWM recovery:
if you want to make update from ZTE OTA, you have to load original recovery, the one in my package is not functional with update to 0.50 and above, so you have to flash from CWM recovery , then reboot and get the proper stock recovery, which will be functional with the update 0.44-0.50 and later.
Click to expand...
Click to collapse
Thanks for the info! I'm currently updating to 0.5 and will let you know if I manage to root it too.
I`ve read the review and mine phone too has the squeaky back cover. It started squeaky after just few back panel removals. This is not a concern for me, but I wanted to ask you something else: How is you call quality? When I do calls the other side can hear me perfectly but the sound through my ear speaker is muffled and not very clear. Increasing the volume make it even worse. Do you experience such an issue?

-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?

DallasCZ said:
-the back cover is really squeaky (i allready ordered another one)
-I am very happy vith the call quality. I had a nexus s whos volume vas up to 100%. Now i am about 60% and everything is loud and clear as i can hear
root and installing cwm is like a charm..i made it in the las 2 weeks (as i own the phone) about 10times
one Question: If you reboot the device do you also have the message "android is upgrading" every time no matter what you do or not do with the system?
Click to expand...
Click to collapse
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty

HuKuTo said:
- I tried updating to 0.5 both through FOTA and with direclty downloaded update from the chinese official site to the sd card, but I always get some error (forgot what it was), will try tomorrow once again.
- My apps are upgrade after each reboot too. I was hoping that 0.5 will fix this issue, but It seems this is not the case.
- I'm on the hunt for a new back cover too, but I will wait for the official blue ones Share your thoughts on the one you purchased after a few days of usage
My only problem with the phone I experience is the bad incoming sound quality during calls. I will have try another sim card.
ps: boy this phone is a beauty
Click to expand...
Click to collapse
Hi, can you please tell the name of chinese official site for our phone? thanks!

SITES IN cHINESE LANGUAGE
Hello,
so there are many sites. To see attachments you have to register to the sites, which is a little bit tricky due to instatnt need of translation in the registration process, but it can be done.
official with a lot of new information also from ZTE service:ztehn.com
the best for custom ROM and Recovery (development):anzhi.com
to see anzhi.com you need to add two adress in your windows hosts file see here
also some good information can be found here on myzte.cn

another tip
-If you get the "android is upgrading" on every boot, then you have to uninstall titanium backup, reboot, wait 3 minutes and let the system settle down, then install titanium again, reboot, and its done.
-if you want to restore WIFI access point and passwords form Titanium Backup, use backup from tar file, not from XML!!!

Waiting on a custom rom
Hello everyone,
I used the method I found at needrom.
It did the trick; the device was rooted, gapps installed, an multilangual.
But I didn't manage to install the latest update (50). I thought it was because the device was rooted, so I removed root, whitout succes, I am still not able to install the update.
Also I think the contact manager is buggy; newly added contacts dissapear after rebooting the device, it doesn't matter if I sync the device. I have to import my contacts from my SD card every time this happens.
So, I hope there comes a good custom rom for this device with this excellent hardware! I have Miui unofficiall on my Xiaomi Mi2s, it works like a charm. I hope soon this device appears on the list one of these days

update
-if you installed the ROm from needrom, i think you cannot upgrade to 0.50.
-on www.ztehn.com you can download the full 0.50 rom (only english and chinese language) this rom you can flash.
-contacts: If you are in contacts, press "more" and "advanced" and check the "default storage" it must be set to your google account. Then go back and check "display settings" and check which accounts are to show in contact list.
I had same problem and the problem was, that all new contact automaticly save to local storage and i have the local storage unchecked to display..so i havent seen my newly added contacts!!!

I have same issue
I have same isse. I dont hear anyone. But everyone hear me. i think that built in speaker doesnt work.

ZTE v5 DualSIM v1.06 beta released (4.4.2 + Nubia UI 2.0, package contains new recovery, H106 update package and G050 restore package)
http://pan.baidu.com/share/link?shareid=2878143782&uk=2436317143 Pass: [COLOR=#0640]j7cb
MD5:[/COLOR][COLOR=#0640]3C318AE402AC5424444F5862B540AF2D
[COLOR=#0640]Uploaded to my MEGA acc: link (1.06 unzipped too)
[COLOR=#0640]BETA release [COLOR=#0640]but seems stable (according to chinese forum feedbacks) I will try thi[COLOR=#0640]s next week, when i receive my v9180 2/8G. [/COLOR][/COLOR][/COLOR]
[/COLOR][/COLOR]

I sucessfully installed 1.06 and its looking good so far. The problem Im facing is the "No connection to google servers" error when I try to add my google account. There is no playstore and I tried to manually install it trhough .apk but again no luck. Have you guys managed to run the playstore with this new firmware?

install my gapps package trough cwm recovery.

[Tweaked SPFT] CM443 ROM: First Tweaked SPFT version 1.1 by CMahendra

CM443 ROM: First Tweaked SPFT version 1.1 by CMahendra
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​Features in v1.0:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Whats new in v1.1
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Whats wrong/missing?
--- Off-screen gestures is intentionally removed for better battery backup, because it is main culprit in faster-drain of battery. It will not be added in my ROM now or in future. But you can try any Free App available on Google Play Store for the same. Kindly do not send request for adding it. I don't want freaking panic reports for battery drains.
Important: Screen Gestures are still working perfectly. For GOD's sake read and understand that Offscreen gestures and Screen Gestures are different things. Those who will again ask it will be recognized as nothing but n00bs.
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any. Restart PC after installing.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
10) ABOVE IS MAIN ROM. Flash Recovery Flashable Zip of Update Version 1.1. Just flash from Recovery and reboot. No wipe required.
Done. Enjoy Press thanks if you liked my work.
​

(UPDATE) Version 1.1 Update (*Flash this from TWRP Recovery Mode over Full Rom 1.0)
Download Link: http://d-h.st/ATiE (2 MB small update)
**Just flash from recovery without wiping anything and reboot.
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
How to flash?
--- Copy file in SDCARD
--- Switch off phone and start in TWRP recovery mode. (Keep Pressing VolumeUP and Power Button, until TWRP starts)
--- Install this update Zip by selecting "Install" option
--- Just reboot to system (Do not wipe anything or do not make factory reset)
ChangeLog:
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
================================================
(FULL ROM) Main SPFT Version 1.0 Package Download
Server 1) Dev-Host (FILE SPLIT IN TWO PARTS. DOWNLOD BOTH LINKS & Click on ZIP file to extract)
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
------------Split Zip Part 1 : http://d-h.st/n8Q (172MB)
------------Split Zip Part 2 : http://d-h.st/Znt (400MB)
*Plesae do not mirror links without permission. It helps us to keep/monitor download counts.
================================================
Patches and Addon (Files and Flashables)
1) BASEBAND Update For Auxus Note by CMahendra (For all Android versions)
http://d-h.st/uWV
---- For strong Mobile network and fast Network Search (APN)
2) Sensor Calibration Test Patch for 4.4.3 Rom
http://forum.xda-developers.com/attachment.php?attachmentid=2952230
---- For solution on FC Error when you click Loudspeaker test in hidden menu *#*#33#*#*

Frequently Asked Questions
Question 1) My phone is not rooted. Can I go with this 4.4.3?
Answer: Yes of course. This can be directly flashed on Unrooted phones with SPFT method. So with this flash you automatically get TWRP 2.7.1.0 Recovery and Fully Rooted ROM! SPFT Unbricks Phone. UNBRICK MEANS, when phone is dead or everything is messed or bootloops or partition table damaged or blank screen or corrupted rom, etc. etc. Just flash with this method and you are back on FRESH 4.4.3 ROM. Flashing Rom from recovery may always get issues if method is wrong or tables not compatible or any wierd issues but Flashing with SPFT means resetting of partition tables and flashing all content in every partition like A COMPANY gives you.
Question 2) My PC/Laptop is not detecting my Phone while flashing. What to do?
Answer: Above drivers worked for me flawlessly. Phone was detected in first try but there are members who reported that they did it 2/3 times and then phone was detected. Well it is weird but you can try installing driver and rebooting pc and repeat it 2/3 times. When it installs the flashing tool will show COM3 serial port connected message at bottom right corner as shown in this image.
If everything fails, try this new USB2Serial Driver which I have recently found from iBerry's official rom package and it should help. DOWNLOAD USB2Serial Driver
Question 3) SPFT Flashing fails with message "PMT changed for the rom it must be downloaded" What to do?
Answer: That error means that the partition table present in the phone is different from the partition table that the rom ur trying to flash to the phone needs. There is drop down with few flashing modes. "Download only" mode doesn't reformat the phone's partitions to what the new rom needs, so you have to choose the "Firmware Upgrade" mode option, that will apply the new formatting table following the settings of the rom you are trying to flash.

Downloading sir. Thank you.
A small clarification please sir.
What is the baseband version in this rom. Is it P6 or P5.
Cause tried mlais ROM from need rom which has baseband of P5.

Great!..
Thanks for 4.4.3 hoping for 4.4.4 and also SAMSUNG GALAXY ROM'S
HOPW YOU DO IT FOR US!

Great work
4.4.3 with SPFT!! That's really FANTASTIC, ha ha ha, now we don't need of separate rooting, custom recovery methods, that's really great work boss, thanks a lot for the ROM. :good::good::good:

baskye said:
Downloading sir. Thank you.
A small clarification please sir.
What is the baseband version in this rom. Is it P6 or P5.
Cause tried mlais ROM from need rom which has baseband of P5.
Click to expand...
Click to collapse
This SPFT version flashes P5 but there is P6 Baseband updates given in Second post. Flash it from Recovery mode..
kiranhdg said:
Thanks for 4.4.3 hoping for 4.4.4 and also SAMSUNG GALAXY ROM'S
HOPW YOU DO IT FOR US!
Click to expand...
Click to collapse
Working on 4.4.4 now. It will come for sure before iBerry even can think of :laugh:
Android update was major task for me. I can not even think of custom roms when the features are not working fine in stock rom. So first mission is perfect camera , battery etc. Just check camera is improved like hell in 4.4.3. Sure some custom roms will follow....
[email protected] said:
4.4.3 with SPFT!! That's really FANTASTIC, ha ha ha, now we don't need of separate rooting, custom recovery methods, that's really great work boss, thanks a lot for the ROM. :good::good::good:
Click to expand...
Click to collapse
Thanks pals

Any body installed this Rom...What's the battery backup?

Great job Mahendra! Thank u Thank u Thank u!!!!!!
Great job Mahendra! Thank u Thank u Thank u!!!!!! The RED patch in camera is completely removed
Not only the camera, Battery , the speaker volume improved. Its Rooted. Has ES explorer preinstalled.
Proximity sensor doesn't seem to work. Please check. I dont have any issue with that as I'm using the phone with flip cover and hence no chance of my ear touching the screen. Have you purposely done away with that to improve battery?
cmahendra said:
[UNBRICK 4.4.3] First ever SPFT version of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
​Features:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Reboot Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
Done. Enjoy Press thanks if you liked my work.
​
Click to expand...
Click to collapse

Can you please provide Xperia Z keyboard for this version.

cmahendra said:
[UNBRICK 4.4.3] First ever SPFT version of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
​Features:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
Done. Enjoy Press thanks if you liked my work.
​
Click to expand...
Click to collapse
Impressive !

question about attached zip files
cmahendra said:
Main SPFT Package Download Links
Server 1) Dev-Host (FILE SPLIT IN TWO PARTS. DOWNLOD BOTH LINKS)
------------Split Zip Part 1 : http://d-h.st/n8Q
------------Split Zip Part 2 : http://d-h.st/Znt
Patches and Addon (Files and Flashables)
1) BASEBAND Update For Auxus Note by CMahendra (For all Android versions)
http://d-h.st/uWV
---- For strong Mobile network and fast Network Search (APN)
Click to expand...
Click to collapse
Just for my information, i need to open only the main zip file and extract it, or i need to do anything else ?

jcpprince said:
Great job Mahendra! Thank u Thank u Thank u!!!!!! The RED patch in camera is completely removed
Not only the camera, Battery , the speaker volume improved. Its Rooted. Has ES explorer preinstalled.
Proximity sensor doesn't seem to work. Please check. I dont have any issue with that as I'm using the phone with flip cover and hence no chance of my ear touching the screen. Have you purposely done away with that to improve battery?
Click to expand...
Click to collapse
No! Proximity Sensor need to be recalibrated from secret manu *#*#33#*#*
Nothing done for battery. Will work on proximity to make it like stock by checking codes. Please wait.
Thanks for flashing this rom and glad you liked the camera and battery results.
IMP: Please edit your post and remove whole quote of opening post.
baskye said:
Can you please provide Xperia Z keyboard for this version.
Click to expand...
Click to collapse
This was based on 4.4.3 stock so I did not mixed Xperia Z keyboard. Wait for next updates. I will try to replace keyboard but after some time. Hope you will wait with patience because I get involved in many models at the same time. You may remind me if I forget. Thanks
ashishgupta1973 said:
Impressive !
Click to expand...
Click to collapse
Thanks a lot. Glad you liked it.
ashishgupta1973 said:
Just for my information, i need to open only the main zip file and extract it, or i need to do anything else ?
Click to expand...
Click to collapse
IMP: Please edit your post and remove whole quote of opening post.
Download both files and keep together in a folder and if you have WinZip / WinRAR / WinJAR, then just doublelick on ZIP file and extract as usual.

(UPDATE) Version 1.1 Update
Download Link: http://d-h.st/ATiE
**Just flash from recovery without wiping anything and reboot.
**TAKE FULL ROM BACKUP IN RECOVERY BEFORE FLASHING. Just a normal precaution
ChangeLog:
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality

Sir,
Is the patches of "Base Band" and "Sensor Calibration" are optional or compulsory.
Thanks you very much for the Great ROM.
:good::good::good:

ThankU Mahendra Sir… Today I install 4.4.3. It's super.
I want some more options could you please consider my options
1.Call connect vibrating is ther in your Rom but call end vibrating not there. Please add that option
2.battery backup is k..but please optimizing better battery backup.. In using of 2g/3g net battery drain 1m/1% discharging.. I faced this problem in 4.4.2. In your rom also same.. In sleeping time(screen off) battery not discharging its awesome.
3.gps is not working in travel time not connected in gps satellite.. In my net connection is h+ but not connected in speed meter..
Could you please consider my problem thanks for this great Rom

Need help on 2 things
Dear Mahendra,
I have posted requests for help a couple of times. Request you to please help me on beneath two items -
- Post flashing the 4.4.3 rom, am unable to find the option of offscreen gestures.
- I am unable to find the option to save fingerprints. After scanning the fingerprint, there is a box on screen that turns green, but there is no option to add or save the print.
- Also, as I just realized today, Bluetooth does not switch on. is there a bug in the rom?

unable to extract zip files
hi, first of all thanks for making ROM for this phone, well after downloading files i was unable to extract them, i dont know whether i bcame dumb :silly: or problem with zip file. i downloaded files 4 times & still i was unable to extract them ! plz correct me where i was :silly:
Thanks

try deleting the space before the extension (.z01) and try extracting from the other zip file
marpudi said:
hi, first of all thanks for making ROM for this phone, well after downloading files i was unable to extract them, i dont know whether i bcame dumb :silly: or problem with zip file. i downloaded files 4 times & still i was unable to extract them ! plz correct me where i was :silly:
Thanks
Click to expand...
Click to collapse

Excellent
cmahendra said:
First ever SPFT version 1.1 of KITKAT 4.4.3
for iBerry Auxus Note 5.5
[Rooted][Deodexed][ZipAligned][Optimized][TWRP 2.7.1.0]
This also UNBRICKS, totally bricked phone. Guys. We now have our own first Stock Rom on 4.4.3. This is also Bhaarat's first SPFT version of AUXUS NOTE 5.5 STOCK ROM. RomDump and built completely by me.
UNBRICKING WILL BE SMOOTHER AND PERFECT WITH ROOTED ROM.
** WITH TWRP 2.7.1.0 RECOVERY
​Features in v1.0:
1) Fully Rooted
2) Deodexed Every App and Framework files
3) ZipAligned & Optimized
4) Installs TWRP 2.7.1.0 Recovery (If you dont want to change recovery, UNSELECT recovery while flashing.
5) Boot Image Modified for improvements
6) Boatwares removed, only stock essentials
7) All latest GAPPS (Maps , Gmail , Playstore, Play Services, etc)
8) Google Now Launcher
9) Loud Sound
10) Ported Improved and Better Stock Camera with frameworks (No Grains in camera)
11) NFC Tools integrated
12) All apps tested ok and perfect.
13) Perfected Boot Animation and Boot Logo.
14) Buttery Smooth
15) Less Battery Drain than 4.4.2
16) Many tiny things I dont remember now
Whats new in v1.1
--- Full Tweaking init.d Support enabled and added 4.4.3 compatible tweaks
--- Network Tweaks for faster server response
--- Deep Sleep Tweak Enabled
--- Battery Backup will improve noticeably. ZERO DRAIN when screen off.
--- Ram Optimization after every reboot
--- Sqlite3 Optimization after every reboot
--- Auto Cache Management
--- Fixed FC in FactoryTest Mode (Hidden menu Calibration)
--- Wifi performance improved
--- Faster UI rendering via GPU
--- Improved photo and video recording quality
Installation Instructions:
Warning: Do at your own risk. Electricity Supply failure or disconnection due to poor cable can still brick your phone beyond repair. I am not responsible for any damages.
1) Optional if already installed before: Download and install ADB USB Driver Provided by iBerry (Recommended). You can also use Universal Android USB Drivers if you have any. Restart PC after installing.
2) Optional if already installed before: Download and Install ADB Driver Installer for Windows (important) while installing connect phone to pc and let is recognize .
After installation is done disconnect phone from pc.
Rebooting PC/Laptop Recommended at this point. DO NOT CONNECT YOUR PHONE NOW.
3) Download and extract Main FIRMWARE Package (Link in Second Post) on desktop or anywhere on your pc/laptop.
4) Also Download and extract SPFT Flashing Tool on your pc/laptop (Download Link)
5) Run as Administrator the Flash_Tool.exe from SPTools folder inside that folder you extracted.
6) Keep all options checked (selected) as shown in following image. If options are not checked (selected) then click on "Scatter-loading" button at top-right side and select "MT6592_Android_scatter.txt" file from extracted "Firmware443" sub-folder . All files options will be selected but if anything is not selected then select accordingly as mentioned in following image.
Now PRESS "Download" button at top
7) Remove battery and memory card from phone and connect PHONE to pc with usb cable. Now pc should recognize phone and flashing should start in a minute. Look at process bar in image below. WAIT WITH PATIENCE.
After flashing is done, the GREEN tick mark will be shown as shown in image below.
8) Now close program on pc and remove cable and reboot phone.
9) Important: When phone starts you should do Factory Reset by going Settings >> Backup & Reset >> Factory Data Reset.
This step will reboot your phone once more.
10) ABOVE IS MAIN ROM. Flash Recovery Flashable Zip of Update Version 1.1. Just flash from Recovery and reboot. No wipe required.
Done. Enjoy Press thanks if you liked my work.
​
Click to expand...
Click to collapse
Hello,
Excellent work, but why you changed resolution !!
Please work on it.
Will post you about battery lifetime once used for 2-3 days