Database Info

Screen Protector

For those of you who already have their Touch Cruise, I'd be interested to hear about how the screen protector sits on the screen. The pictures seem to show a flush face, which might make the screen protector look a bit odd and also come off much easier.
I have also seen some posts indicating the screen itself if a little different than the traditional touch screens to support the touchflo interface. Does that have any effect on the screen protector?
Thanks!

davidklong said:
For those of you who already have their Touch Cruise, I'd be interested to hear about how the screen protector sits on the screen. The pictures seem to show a flush face, which might make the screen protector look a bit odd and also come off much easier.
I have also seen some posts indicating the screen itself if a little different than the traditional touch screens to support the touchflo interface. Does that have any effect on the screen protector?
Thanks!
Click to expand...
Click to collapse
The screen protector is not the regular rectangular shape so it is not odd! It is cut to fit the contours of the whole front, minus the silver buttons area. Has cutouts for the camera and the earpiece area. You wont notice it is there if you allign it well. Make sure you sprinkle some water on the protector adhesive surface, and the device screen itself (careful here!) so that you can adjust the position, and then "scrape"out the excess water. Any trapped droplet will evaporate with time

1) Does the screen protector come with the package?
2) Now that your screen protector is flushed with the device surface, do you think it will come off from the edges if you were to slide it in and out of your pocket (or leather pouch)? Coz I have this Sony T-100 cam with a flushed screen surface and boy.. the protector came off very badly as I slide it in and out of the pouch.
Thanks!

MasK said:
1) Does the screen protector come with the package?
2) Now that your screen protector is flushed with the device surface, do you think it will come off from the edges if you were to slide it in and out of your pocket (or leather pouch)? Coz I have this Sony T-100 cam with a flushed screen surface and boy.. the protector came off very badly as I slide it in and out of the pouch.
Thanks!
Click to expand...
Click to collapse
Came in the package. Sticks well so no sign of peeling yet. I don't think it will peel off without special effort

What is the colour of of yours and where you bought it?
victoradjei said:
Came in the package. Sticks well so no sign of peeling yet. I don't think it will peel off without special effort
Click to expand...
Click to collapse
What is the colour of of yours and where you bought it?

bluebee said:
What is the colour of of yours and where you bought it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=353409

Well it's kinda nice that it comes with the package, saves me from finding one on the internet.

Hi all,
where i can buy screen protector like the original?

davidklong said:
For those of you who already have their Touch Cruise, I'd be interested to hear about how the screen protector sits on the screen. The pictures seem to show a flush face, which might make the screen protector look a bit odd and also come off much easier.
I have also seen some posts indicating the screen itself if a little different than the traditional touch screens to support the touchflo interface. Does that have any effect on the screen protector?
Thanks!
Click to expand...
Click to collapse
Well david, the screen protector fits almost perfect over the full surface screen area of the phone. You will not even be able to realize it,but for sure you'll find an only small problem, just around the lens of the camera.....take a view of it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Even if you try your best to fit it better than i did, you will never get the circle of the stick with the circle of the cam. I don't think is a real problem.
Here you can see how the sticker fits at the lower side of my phone, just perfect.

problem with things that come with the packet is the good old
you get what you pay for this goes for cpu fans thats comes with the cpus
too

Rudegar said:
problem with things that come with the packet is the good old
you get what you pay for this goes for cpu fans thats comes with the cpus
too
Click to expand...
Click to collapse
I got a perfect fit. Maybe because mine is not the O2 version. I gave a detailed process using water on both protector sticky surface and the device screen earlier

Screen protector

Hello All,
Can anyone suggest where can we get screen protectors for HTC touch cruise. I mean the protecter should cover not only the display but also the camera and notifications led's???

You should have 1 or 2 in the box. And you don't want it to cover the camera. The picture/video quality would be poor.

Abbsta said:
You should have 1 or 2 in the box. And you don't want it to cover the camera. The picture/video quality would be poor.
Click to expand...
Click to collapse
I had only one in the box and when i am trying to apply it, it didnt go of well. So, I want to remove it and apply a new one. Screen protector i am having which came in the HTC box, leaves holes for camera and notification led. Why we need to cover entire display is when we use the touch cube functioanility often ur fingers slips and it leaves finger spots there....

In the german forum they discuss about the same problem... nearly everybody is waiting for screen protectors from "BRANDO" They don't cover only the screen.

isv51 said:
In the german forum they discuss about the same problem... nearly everybody is waiting for screen protectors from "BRANDO" They don't cover only the screen.
Click to expand...
Click to collapse
I second that! I have had BRANDO protectors on nearly all my PDAs and they NEVER got scratched on the screen or anything. The protectors are not cheap but worth it!

Brando replied to me they are going to ship the Cruise protectors within 2 weeks. So let's wait and see.

I'm in the same condition... I'm waiting Brando screen protector, it's the best!

I never owned a ppc before... For my TC is nothing too expensive Only the best.

a piece of plastic a small distant from the lense would work as
the evil opposite of another lense killing focus

if you didnt apply it ok then redo it, i took mine out like 3 times untill i installed it correctly, i washed it with soap to clear dust and stuff and re-applied, worked like a charm

I bought a protector from Veripart together with the Polaris. It has a cutout for the speaker on the top but not one for the camera, but it is so clear that it does not interfere with the camera (not visibly anyhow). I tried a photo before applying the protector and after under the same circumstances and I did not find any differences. Besides that it makes the lens easier to clean because it is now flush with the rest of the screen. I like it very much. I never use the supplied protectors with my phones. If you ever tried a Brando or a Veripart then you will know why ;-) . The protector covers the whole of the front of the phone, right until the edges of the device.

http://www.expansys.it/htc/p_htc_item.aspx?i=156120
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ronaldvg said:
I bought a protector from Veripart together with the Polaris. It has a cutout for the speaker on the top but not one for the camera, but it is so clear that it does not interfere with the camera (not visibly anyhow). I tried a photo before applying the protector and after under the same circumstances and I did not find any differences. Besides that it makes the lens easier to clean because it is now flush with the rest of the screen. I like it very much. I never use the supplied protectors with my phones. If you ever tried a Brando or a Veripart then you will know why ;-) . The protector covers the whole of the front of the phone, right until the edges of the device.
Click to expand...
Click to collapse
Where did you get it? do they have a US website?
Cheers.
= J =

Matteo66 said:
http://www.expansys.it/htc/p_htc_item.aspx?i=156120
Click to expand...
Click to collapse
FYI, these do not cover the entire faceplate of the Polaris. They are just standard protectors (and not very good ones at that) sized to the touch screen.
db

I've been using the protector that came with the phone and I find that unless I keep it clean, the touch experience is not so great. Sometimes hard to get a smooth swipe. The glass on the screen however works well even when smudged. Is there a protector out there that works better? If not, I'm going bareback.

Rob CT said:
I've been using the protector that came with the phone and I find that unless I keep it clean, the touch experience is not so great. Sometimes hard to get a smooth swipe. The glass on the screen however works well even when smudged. Is there a protector out there that works better? If not, I'm going bareback.
Click to expand...
Click to collapse
Dont do it man. No glove no love

Can any one has any idea where we can get screen protectors for TC. I want to cover the entire faceplate.. I am based in US. So, any US links will do a world of good.

bluebee said:
Can any one has any idea where we can get screen protectors for TC. I want to cover the entire faceplate.. I am based in US. So, any US links will do a world of good.
Click to expand...
Click to collapse
HERE: http://www.mobileplanet.com/p.aspx?i=156120

wonderiuy said:
HERE: http://www.mobileplanet.com/p.aspx?i=156120
Click to expand...
Click to collapse
I called Mobile planet and they told it will cover only 2.8" screen

The screen protector that came in my package with the TC covers the whole dark-grey area above the soft buttons, and has a cut for the phone and the camera. Wiping is super easy, and cleaning too. I don't know what you guys are talking about

[REVIEW] Halo Premium Anti-Glare/Matte Screen Protector

Promised to do a review on this screen protector, so paulo this one's for you. Haha. Well I've had this screen protector on for about 4 weeks now, and I absolutely love it. I would definitely recommend it, especially for those on a budget. A $5.95 well spent.
Pros:
Dry application
Precise cut outs
Great touch responsiveness (Swyping with this bad boy is a breeze.)
No fingerprints
No smudges
Better visibility in sunlight
Looks sexy lol
Cons:
Took me 2 out of the 3 protectors to get it on right, or without bubbles. Maybe I'm just not good at that.
Screen quality degradation (This is expected with a anti-glare/matte screen protector. There is some pixelation, which is really noticeable on white backgrounds.)
You can but it HERE.
Pictures that took me forever.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks for the review. I already ordered mine and just wanted to check out some more images of it. Out of curiosity, what case are you using? Also is there a notice gap between the protector and the lip of the case? The first few images make it seem like it, but the rest make the gap appear small.

keisukehonda said:
Thanks for the review. I already ordered mine and just wanted to check out some more images of it. Out of curiosity, what case are you using? Also is there a notice gap between the protector and the lip of the case? The first few images make it seem like it, but the rest make the gap appear small.
Click to expand...
Click to collapse
I'm guessing you are taking about the difference between this picture of the screen protector:
vs
Well there are two reasons.
1. I didn't apply the screen protector perfectly. You can also see the little bubbles created by dust left on the screen. So I took it off, and tried again.
2. Two different cases. I doubt this affects it, however, considering I switch the cases out per week and the gap between the screen protector and the case doesn't increase or shrink.
I have two cases. The white one the Mercury TPU Nexus 4 case(comes in many different colors), and the black one is the Acase Superleggera Pro Hybrid dual layer Nexus 4 case(also comes in different assortments).

I'm also using this screen protector and I love it too,great price ya can't go wrong with these. ????
Sent from my Nexus 4 using xda app-developers app

I bought this screen protector 3 months ago but never used it, as it looks like a hassle to apply if it takes going through most of them to get one that is applied properly. I just kept the stock plastic protector on mine; maybe after that gets destroyed I will give it a try.

pjc123 said:
I bought this screen protector 3 months ago but never used it, as it looks like a hassle to apply if it takes going through most of them to get one that is applied properly. I just kept the stock plastic protector on mine; maybe after that gets destroyed I will give it a try.
Click to expand...
Click to collapse
its pretty simple just be quick, and i would day do it in the restroom, less dust in the air. always works for me.

I've installed countless screen protectors for me and friends. For the wet ones, you definitely want to be in a steamy bathroom as that helps settle the dusts. The dry ones, need to be done quickly. You can slip a small piece of tape between the screen and the screen protector to grab some of the dust. The stickiness of the tape beats the static force created by the protector. Not sure of its technical name.
My silliest method was to put the phone in the middle, on top of a fan blowing air upwards. That way it created a space where dust will not be. It worked perfectly.

Any place to buy this internationally?

DeepMemory said:
Any place to buy this internationally?
Click to expand...
Click to collapse
Man. That sucks. Well honestly if you wanted to. I could buy one and then post it up onto eBay and you could buy it off of me for the same price. Just the shipping cost would be different since you're international. Not trying to advertise or anything just suggesting.
Sent from my Nexus 4 using xda premium

i`m surprised that there is no bubbling at the edges at the price the Halo is selling... or is it not caught on the picture?
I assume this will be the same for the glossy version?

DeepMemory said:
Any place to buy this internationally?
Click to expand...
Click to collapse
Not sure man. Try looking for it in the amazon website in your country.

hpl912 said:
i`m surprised that there is no bubbling at the edges at the price the Halo is selling... or is it not caught on the picture?
I assume this will be the same for the glossy version?
Click to expand...
Click to collapse
I mean, I guess there is. But to notice the bubbling you would have to nitpicking or looking in with a magnifying glass (not really). I'd say the bubbling on the side is about .25 cm from the edge. Really slight, and with my case on you can't notice it.

Slightly off topic, but what case is that on your N4 OP?
Sent from my Nexus 4 using Tapatalk 4 Beta

gear.h34d.2012 said:
Slightly off topic, but what case is that on your N4 OP?
Sent from my Nexus 4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Acase Superleggera Pro Dual Layer Case

Tempered Glass Screen Protector for LG G5

For LG G5, I think the screen protector is good choose than case.

rumbikrobo said:
I think that a good screen protector is always an impotent accessory for any smartphone. If I buy LG G5 I'll definitely get a Tempered Glass Screen Protector
Click to expand...
Click to collapse
anyone know of a good one thats not a PRE ORDER ?

Module will not affect the phone screen protector?

LORD19191 said:
anyone know of a good one thats not a PRE ORDER ?
Click to expand...
Click to collapse
There are few people who have them in stock on Amazon and eBay

Hi,
Has anyone got images of the full glass screen and the middle covered glass screens on the actual phone yet?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks

Jerseymase54 said:
Hi,
Has anyone got images of the full glass screen and the middle covered glass screens on the actual phone yet?
Thanks
Click to expand...
Click to collapse
Since I bought a screen protector for my Nexus 5X. So Maybe I could choose the same brand iPely for my LG G5.

Just ordered the YooTech tempered glass screen protector from Amazon! I will update and take pics when it gets in! :good::fingers-crossed:

aknotts415 said:
Just ordered the YooTech tempered glass screen protector from Amazon! I will update and take pics when it gets in! :good::fingers-crossed:
Click to expand...
Click to collapse
looks like you got the last one. its currently unavailable.

riggsandroid said:
looks like you got the last one. its currently unavailable.
Click to expand...
Click to collapse
Yeah I noticed that lol I hope theres not anything wrong with the design lol

aknotts415 said:
Just ordered the YooTech tempered glass screen protector from Amazon! I will update and take pics when it gets in! :good::fingers-crossed:
Click to expand...
Click to collapse
I bought one Yootech glass screen protector for my Nexus 5X,but there is one air bubble.So I try another brand,looks great and feels good.

I used the Yootech for G4 and it's pretty great, hopefully this one works well too

Has anyone recieved one of these yet that has the top bit of the phone covered as well? I'm wondering how it interacts with the curve at the top. Thanks.

UnderTheAir said:
Has anyone recieved one of these yet that has the top bit of the phone covered as well? I'm wondering how it interacts with the curve at the top. Thanks.
Click to expand...
Click to collapse
I've ordered a coscod for me and the wife that has the full coverage with the curved top.. They not cheap, so we'll see how it works out. I'll be getting it in tomm..
Sent from my LG-H810 using XDA-Developers mobile app

i wonder what will happen to the bottom, uncovered by the glass, battery part.
thick plastic housing over metal will definitely be sratched badly in first month of use.

cellhelmet.com
They were on Shark Tank a couple years back

I'm returning an item just like this (different vendor) as the adhesive is just around the borders and top.
The adhesive is weak and in my case it was not aligned properly to the "glass" so you could see it covering some parts of the screen.
The middle have no adhesive whatsoever and it does not make contact with the phone screen. This causes the protector to flex and each tap/touch on the screen feels like using an old phone with plastic screen.
One last thing: it is a fingerprint magnet and very reflective.
InflatedTitan said:
I've ordered a coscod for me and the wife that has the full coverage with the curved top.. They not cheap, so we'll see how it works out. I'll be getting it in tomm..
Sent from my LG-H810 using XDA-Developers mobile app
Click to expand...
Click to collapse

LGSilva said:
I'm returning an item just like this (different vendor) as the adhesive is just around the borders and top.
The adhesive is weak and in my case it was not aligned properly to the "glass" so you could see it covering some parts of the screen.
The middle have no adhesive whatsoever and it does not make contact with the phone screen. This causes the protector to flex and each tap/touch on the screen feels like using an old phone with plastic screen.
One last thing: it is a fingerprint magnet and very reflective.
Click to expand...
Click to collapse
Dang, that sucks. I'll definitely be needing tempered glass, and this is one reason I'm leaning toward the G5—Edge owners are having a devil of a time finding a good one for themselves.

Please post pics of the Yootech.
I'd be really surprised if there's a tempered glass protector that is already correctly designed for the curve at the top. As in, Will it stay stuck? In the past whenever I've had a curved glass phone it's usually months after its release when a company finally designs a true curved TGSP. I hope I'm wrong because I have a Yootech on the V10 and it's great! (Them not making one for the S7 yet might be a sign as to why this was pulled from Amazon).
I settled for a cheap square one for now [Omoton on Amazon].

InflatedTitan said:
I've ordered a coscod for me and the wife that has the full coverage with the curved top.. They not cheap, so we'll see how it works out. I'll be getting it in tomm..
Sent from my LG-H810 using XDA-Developers mobile app
Click to expand...
Click to collapse
It is too expensive in my opinion.Less than $10 is OK.

I'm cautious of anything that claims to cover curved glass. This is just based off of my past purchases.
Waiting for guinea pigs to test the waters first

What's your Essential PH-1 protection?

This is what I went with initially
Skin: https://www.amazon.com/gp/product/B075B4BSS8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Screen: https://www.amazon.com/gp/product/B075VMCN1J/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
My take on things, The screen protector is working great and comes with black borders so it's hard to mess up ad no halo effect. The skin on the back will do for now, fits perfectly but I really need Ringke Fusion case for this baby.
So what is your choice?

I went with the Phantom Skin. Lifetime replacement. It is only scratch protection, but I rarely drop my phone. It is, for all intents and purposes, invisible.

Dbrand skin and Ozero tempered glass.
Sent from my PH-1 using XDA-Developers Legacy app

Skinomi back, side, top and bottom skin + liquid screen protector

SopiGuard skin and Delta Shield screen protector.
Sent from my PH-1 using Tapatalk

TheDethEgineer said:
Skinomi back, side, top and bottom skin + liquid screen protector
Click to expand...
Click to collapse
Which liquid screen protector are you using?
Sent from my PH-1 using Tapatalk

Dbrand on the back for me, and that's it.

D brand dragon skin on the back, Orzero screen protector and occasionally Viva Madrid case.
Sent from my PH-1 using XDA-Developers Legacy app

Tikerz said:
Which liquid screen protector are you using?
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
https://www.amazon.com/gp/product/B074TZ2Y5M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
This is a combo, screen protector + skin. I think you can just get the screen protector

TheDethEgineer said:
Skinomi back, side, top and bottom skin + liquid screen protector
Click to expand...
Click to collapse
I couldn't get the any of the pieces to stick to the titanium. Even wiped down with alcohol it just slid off.

bill3508 said:
I couldn't get the any of the pieces to stick to the titanium. Even wiped down with alcohol it just slid off.
Click to expand...
Click to collapse
That is weird, mine is perfect. I know they have great costumer service, if you want you can get a new one for free, contact support and tell them it did not worked.

Naked and beautiful, baby.

spotmark said:
Naked and beautiful, baby.
Click to expand...
Click to collapse
Pervert, ?
Sent from my PH-1 using XDA-Developers Legacy app

andril said:
This is what I went with initially
Skin: https://www.amazon.com/gp/product/B075B4BSS8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Screen: https://www.amazon.com/gp/product/B075VMCN1J/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
My take on things, The screen protector is working great and comes with black borders so it's hard to mess up ad no halo effect. The skin on the back will do for now, fits perfectly but I really need Ringke Fusion case for this baby.
So what is your choice?
Click to expand...
Click to collapse
Can you post a photo of the screen protector? I'm concerned on the bottom chin part of the phone. The Orzero looks like the corners are rounded while the PH-1 is not. The Orzero in the photo makes it look like a Galaxy which I hate.

LastQuark said:
Can you post a photo of the screen protector? I'm concerned on the bottom chin part of the phone. The Orzero looks like the corners are rounded while the PH-1 is not. The Orzero in the photo makes it look like a Galaxy which I hate.
Click to expand...
Click to collapse
It is actually nice, I wish it completely covered the screen without camera cut out.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my PH-1 using Tapatalk

andril said:
This is what I went with initially
Skin: https://www.amazon.com/gp/product/B075B4BSS8/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
Screen: https://www.amazon.com/gp/product/B075VMCN1J/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
My take on things, The screen protector is working great and comes with black borders so it's hard to mess up ad no halo effect. The skin on the back will do for now, fits perfectly but I really need Ringke Fusion case for this baby.
So what is your choice?
Click to expand...
Click to collapse
andril said:
It is actually nice, I wish it completely covered the screen without camera cut out.
Sent from my PH-1 using Tapatalk
Click to expand...
Click to collapse
I also don't want that camera cutout. Ozero is looking nice. The black area of the chin is not rounded at all. There is notable rainbow effect. I guess that's the only one owners are complaining about.

LastQuark said:
I also don't want that camera cutout. Ozero is looking nice. The black area of the chin is not rounded at all. There is notable rainbow effect. I guess that's the only one owners are complaining about.
Click to expand...
Click to collapse
I think the rainbow is from my displays, ordered another screen protector to compare
Sent from my PH-1 using Tapatalk

Just coated my all phone. It's feel so slippery....reminds me oleophobic coating.
All around never bad idea for additional 9H protection+less finger prints, easy to clean + extremely shiny

@andril Is this one of those screen protectors with the black borders that does "full coverage"? Or is it smaller than the screen? Hard to see in the pics

MaliceOmega said:
@andril Is this one of those screen protectors with the black borders that does "full coverage"? Or is it smaller than the screen? Hard to see in the pics
Click to expand...
Click to collapse
It covers the whole screen, fully protected and camera cut out. A little smaller to case friendly.
Sent from my PH-1 using Tapatalk