Hey,
I've recently had a friend of mine give me his phone to look at.
It's a Samsung I5801
I tried installing numerous ROM's onto this such as stock froyo and kyrillos 9.
Whenever i install through Odin i get to the stage where the data needs to be wiped through clockwork. Pretty straight forward, however when the phone is rebooted after this Odin does not detect the phone and will boot into recovery again.
Any ideas? I'm not much of a samsung kinda guy woking with htc all my life lol.
Solved.
Flashing a stock ROM, with bootloader in tact did the job. Had to say was sweating a bit as many were saying it could hard brick phone... Used European JPA.
Flash through ODIN i pray to god no one else has this problem
Wipe using Recovery
Just go in recovery mode and Wipe Cache and Dalvik-Cache.
Problem solved........
I have hard bricked my galaxy 3
I installed ClockworkMod recovery and selected to install ROM from SD card
my phone restarted and booted in samsung,s recovery mode
I selected wipe data and nothing happened for next in 2-3 mins,
So I removed battery and rebooted phone which again booted in samsung,s recovery mode for number of trials.
Then I renamed Rom Filr name to update.zip and moved it to root of SD
and rebooted in recovery and selected option Install update.zip which after some time started executing.
Phone rebooted and now it doesn't show anything else than samsung boot logo.
please help me out.
UPDATE:
Download mode and Upload mode are working but Boot menu is not working.
>>[email protected]<< said:
UPDATE:
Download mode and Upload mode are working but Boot menu is not working.
Click to expand...
Click to collapse
Just give it a try via ODIN since download mode is working
This link might help you ,
he has clearly explained the Odin process to
flash Roms and several do's and dont's
http://forum.xda-developers.com/showthread.php?t=1372414
Guyz my phone was rebooting since the last few days and yesterday it suddenly stuck on the I5801 logo. I tried going into to recovery mode and reseting the data but it dint work it was getting stuck there to like it kept on going and tried it a few times.I dont remmeber if i have ticked the usb debugging option and i dont know how to proceed but my phone goes into downloading mode wen i press the keys for it so can any tell me a solution to it .Thanks in advance im kind a new to this but i know how to flash using odin so i wanted to ask should i flash the kernel or rom and which one
download any .tar ROM like kyrillos rom and flash it via odin
connect the phone to download mode and then open odin and select the .ops file and tick one package and select the .tar rom you have downloaded and then click start
once the download is complete, wipe data in the recovery (it automatically enters it)
and then reboot
enjoy
Thanks alot ill try it out
my friend gave this link i flashed it accourding to this
://androidadvices.com/samsung-galaxy-3-gt-i5801-steps-install-official-froyo-ddjp6-22-firmware/2/
now my phone is stuck on
-- delete app data.....
Delete files,please wait.
i tried going into recovery but same thing happens.
Im not familiar with androidadvices.com so cant say why that would happen, I know that there is stock firmware available on here is you search STOCK FIRMWARE you will find it. download one you want to unzip it, flash the .tar file via odin and factory reset and wipe dalvik cache. this should solve any problems you have.
http://forum.xda-developers.com/showthread.php?t=1497261
download JPU and flash it via odin
My gti5801 is stuck on recovery menu and i dont know what to do...
pull out the battery and reflash your rom with odin
Hello everyone!
I had some stability issues on my Samsung GT-I9003, so I flashed it . And, as the title says it, I'm stuck in a bootloop. I've tried 3 or 4 flashings with different packages. Some where "One packages", with one unique PDA, or I tried the XXKPE with everything. And I'm lost. I never get past the first boot screen.
[EDIT]
I found a way to boot it, but the touchscreen isn't working, so I'm now stuck on the language selection page...
Is it my ROM who doesn't fit?
[/EDIT]
Thanks!
Before going to download mode try wiping everything, then flash xxkpe TWICE then wipe again. Make sure you flash it correctly. And odin shows PASS. Try flashing the latona.pit included in xxkpe.
Press thanks if it helped..
Sent from my GT-I9003 using XDA
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
so weird. Where did you download your xxkpe. Try here
http://forum.xda-developers.com/showthread.php?t=1004647
then follow the guide here
http://forum.xda-developers.com/showthread.php?p=14933114
I think you just fail a step on flashing a rom.
---------- Post added at 09:16 PM ---------- Previous post was at 09:14 PM ----------
Flashing bagaria root is done after flashing a stock rom for it to be rooted. You failed to put CSC file in odin maybe. Follow the guide above perfectly then everything will be fine.
You start the procedure on Step 3 if your done downloading XXKPE here
http://forum.xda-developers.com/showthread.php?t=1004647
jonasdu91 said:
Thanks for the answer!
Problem is it didn't work!
I got a little deeper in the problem. In order to boot to android, I need to flash the bagaria root file. It contains the normalboot image. So I assume that the boot is corrupted. I'd add that after the rooting, the android recovery boots and wipes everything, but he says that the CSC wasn't installed, because "[...]/stl11" is not there. Is it the .pit?
I'm lost, again...
Thanks a lot for your help!
Click to expand...
Click to collapse
/stl11 is the /cache partition.
look like you fail to flash pit file, or u flash "one package .tar file" with partition ticked in odin.
see below for the samsung recommend setup
flash pit file with all the firmware one short.
if you flash from Froyo to GB, i recommend to flash the bootloader update.
however, flash on you own risk.
100% Work!
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
For those who are struck in boot loop or Softbrick their mobile do the following things exactly as they had mentioned. I followed them and boom my phone is back to normal.
For bringing your phone back to download mode (Recovering from Softbrick)
http://forum.xda-developers.com/showthread.php?t=1411768
After entering into download mode (reinstall Ginger bread )
http://forum.xda-developers.com/showthread.php?t=1133787
Note: This step deletes your user data, so be sure what you are doing
Definitely your phone should be back to normal if you follow these steps exactly.....
Million Thanks to all those who helped me in bringing back my mobile to normal function....
Hi, I am facing the same issue with a GT-I9003 as jonasdu91. I tried all the solutions mentioned above, tried all sort of firmwares. The only time the phone responded was when I flashed the bagaria file. That too ended up with a non-responsive touchscreen at the language selection screen.
Could anyone suggest what more could I do to get the phone to upgrade?
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Worked for me too!!! You saved my life! Thanks!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
Good!
ghassir said:
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Click to expand...
Click to collapse
How do I flash other stock rom after that? I've tried to flash XXLE4 rom, and received boot error and unmounted FS
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
YLNdroid said:
Hello everyone, an acquaintance of mine, had initially given his Galaxy SL device to a friend of his, asking him, to 'update' the software on the device. The device had come with Android 2.2.1, pre-installed on it (PDA: I9003DDKB2; PHONE: I9003DDKA5; CSC: I9003ODDKA6).
Apparently, my acquaintance's friend flashed the I9003DDMF1 stock Gingerbread firmware via PC ODIN, and after my acquaintance gave me the device, I noticed, it did not boot to a home screen. It would boot loop at the Samsung boot animation.
The device boots into Download Mode, but does not get into the stock Recovery Mode. So, I attempted numerous remedial procedures. I used PC ODIN3 v1.85 for all flashing instances.
Keeping Misledz's guide, http://forum.xda-developers.com/showthread.php?t=1133787, as a reference, I flashed the I9003XXKPE firmware package, followed by the I9003XXKPQ_I9003SERKPQ_SER firmware.
After PC ODIN gave a PASS for the I9003XXKPE firmware package flashing instance, the device rebooted, and I observed a process, looking like the stock Recovery Mode, continuing on the device. There were a couple of strings, displayed in red colour. The device rebooted again to the Samsung logo, and I had to pull the battery out, to continue with the I9003XXKPQ_I9003SERKPQ_SER firmware flashing instance. After PC ODIN displayed the PASS sign and the device rebooted, I unplugged the USB cable, but the boot loop at Samsung boot animation persisted.
Since the above mentioned procedure did not solve the boot loop issue, I decided to take the device back to a stock Froyo firmware, and if successful, reattempt to 'update' the device to stock Gingerbread (2.3.6), by following Misledz's guide. I flashed the I9003_XXKB1 stock Froyo firmware, but this time, the device would not go beyond the Samsung logo.
As a momentary last attempt, before seeking help here, I flashed the I9003ZCKC1 firmware package, but yet, the device does not go beyond the Samsung logo.
All the flashing instances completed successfully on PC ODIN.
Is it possible to revive the device, such that it boots to a home screen and is functional again? I desperately need help.
Click to expand...
Click to collapse
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
Put the files like this:
PIT - latona_20110114.pit
PDA - I9003XXKC1-REV08-PDA-low-CL964212.tar.md5
PHONE - MODEM_I9003XXKC1_REV_00_CL964949.tar.md5
CSC - GT-I9003-CSC-SERKC1.tar.md5
Click to expand...
Click to collapse
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
xumix said:
Firstm download this XXKPE: https://disk.yandex.ru/public/?hash=mTOUkkpPv4WgFtvIpy07S2CwUoU5gUcna1FTdjKHc90=
and flash it.
It contains all 5 files needed to boot your phone. This will repartition your phone and make it alive, after that, you may flash any 2.3.x ROM you like.
Click to expand...
Click to collapse
xumix, thank you very much for your response.
I believe, the 5 files contained within the I9003XXKPE_Odin3_1.8.5.zip package, would correspond to the options available in PC ODIN3 v1.85, as follows -
PIT > latona_20110114.pit
BOOTLOADER > APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PDA > CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5
PHONE > MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5
CSC > GT-I9003-CSC-MULTI-OXAKPE.tar.md5
Click to expand...
Click to collapse
Am I right?
:silly:
YLNdroid said:
Am I right?
:silly:
Click to expand...
Click to collapse
You are right
xumix said:
You are right
Click to expand...
Click to collapse
xumix, I flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, but to no avail. The boot loop on the Samsung boot animation continues to persist.
EDIT
I have noticed there is a u1_02_20110310_emmc_EXT4.pit, contained within the Odin3-v1.85 folder. What is this, PIT file for?
I re-flashed the I9003XXKPE_Odin3_1.8.5.zip firmware package using PC ODIN3 v1.85, and the process completed successfully. But, since the boot loop at the Samsung boot animation persisted, I pulled the battery out, and booted into Recovery Mode, not once, but on two separate instances. I was able to perform a wipe data/factory reset, on the second instance. I also performed a wipe cache partition and rebooted the device. But, the boot loop issue still continues.
I have attached images of both instances, I clicked using another device, to this post.
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Sent from my GT-I9003 using Tapatalk
chongns said:
If dont mind. Try my step below.
In download mode
Flash pit file alone. Make sure repartition is ticked.
Phone will black screen, you pull out battery and put back.
Download mode again. Flash xxkpe without pit file.
BTW, you error show properly is emmc chip broken, hope it is not.
Click to expand...
Click to collapse
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
YLNdroid said:
chongns, I followed your stepwise suggestions, to the word, but unfortunately, the boot loop issue still persists. One distinct error under the stock recovery is, E:format_volume: rfs format failed on /dev/block/mmcblk0p3. Am I correct to believe this error strongly indicates, or rather confirms, the internal SD is damaged?
Also, what are the possible causes (physical, and or, logical) that would damage the internal SD? Is it worth sending the device to an authorised Samsung service centre, for an appropriate repair process?
Click to expand...
Click to collapse
Friends, I still await your expertise.
:fingers-crossed:
I have Samsung galaxy note 10.1 GT-N8010 UK model. so after 6 months i rooted it through odin and used to install some rooted apps. from playstore i installed an app and after that the tablet suddenly restarted and stucked on the logo "Samsung Galaxy Note 10.1" after that i restarted it in odin mode but nothing happens. some time recovery mode for wiping data but nothing happened. NOte: clockworkmod recovery mode doesnt opens just simple recovery mode. and now that also recovery mode also not opening just odin mode. So please guyz tell me have i bricked my device or its hardware isssue or software or it can be repaired please please help me.
od:n node is a good sign. just-find a stock image and flash with odin.
Thanks: BUt
thanks alot. please tell me that is unrooting method?
No, thats not the unrooting method.
Best idea is to flash a stock rom, re-root, then run triangle away to reset flash counter and status's. Then use Mobile ODIN pro to flash a stock rom, make sure if you want to go stock that you untick the everroot options and re-install mobile ODIN options, then also tick wipe cache\data and wipe dalvik cache. This will wipe EVERYTHING off your internal memory so make sure you have backed up everything that you want to keep.
You now have a factory reset stock phone. No flash count, ALL status's back to "Official".
done
i have done the first method flashed 4.1.2 through odin and thanks alot it worked. now i want to install AOKP i like it so for this is should reroot my phone and flash it through odin and cwm not working on my tablet. thanks to all of you
ultramag69 said:
No, thats not the unrooting method.
Best idea is to flash a stock rom, re-root, then run triangle away to reset flash counter and status's. Then use Mobile ODIN pro to flash a stock rom, make sure if you want to go stock that you untick the everroot options and re-install mobile ODIN options, then also tick wipe cache\data and wipe dalvik cache. This will wipe EVERYTHING off your internal memory so make sure you have backed up everything that you want to keep.
You now have a factory reset stock phone. No flash count, ALL status's back to "Official".
Click to expand...
Click to collapse
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Stock recovery ????
Flash stock rom via Odin gives you stock recovery .
jje
Mansoor1223 said:
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Click to expand...
Click to collapse
if its the stock rom you open in odin it will generally stop responding, just let it be and in a few minutes it will be ok then you can flash. its just checking the file
Mansoor1223 said:
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Click to expand...
Click to collapse
If you're using PC odin you need to go to download mode 1st - from power off hold down lower volume and power button until the "warning" comes on the screen. press up volume and you get to download mode.
Connect the tab to the PC with USB and run ODIN. It will light up one of the com ports with "Com 0" Or something displayed. Make sure you DON'tT have Kies active or it won't work. It must be exited from or uninstalled. Also don't have another samsung phone/tab attached or it will pick this up too...
Shouldn't do anything but if it does detect, it is a shock when "FAIL" shows up, especially if you're not sure already... You might do something stupid like disconnect the tab in the middle of a flash...
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
jackrabbit72380 said:
Help softbricked device
well i was running more rom on the device when i droped it then i got the screen and digi replaced
and when the tech tuned it on for the first time after repair we got a udc start screen that says unknown error at the top
i can get to download mode though. but even after trying to restore the bootloader or flash a new modem i cant get to any recovery.
right now this is what it says in download mode.
odin mode
product name : SM-G900P
current binary: custom
system status : custom
knox warranty void 0x1 (4)
i can go to download mode or try and let it boot up to the samsung boot but it says recovery booting in blue and loops there on reboot.
i forget the name of the modem i was on in more rom. i think it was the one be4 ota6
but i want to update to latest version of modem and rom not sure where to start.
i cant seem to get back to stock or custom recovery at all. or even boot up to a rom now. and i honestly have no idea why? =( can someone help?
Click to expand...
Click to collapse
Follow the instructions from this post. Since you are soft bricked at the moment, you'll need to start at step 4. If you have an extSD in your phone, you might want to pull it until after you're up and running because the "Android" folder from Kitkat needs to be deleted and rebuilt for Lollipop.
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
jackrabbit72380 said:
That's what I tryed first but it didn't work,
First step.... flash SM-G900P_OA6_FullRestore.
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
sense that didn't work i tryed... SM-G900P_NI3-Full_Restore_Unrooted (Compressed Archive)
(on boot i have samsung galaxy s5 screen with blue letters at the top saying recovery booting and it loops.)
then i tryed SM-G900P_OA6_FullRestore. again but still no luck im out of ideas
I cant get to any recovery.
please help.
Click to expand...
Click to collapse
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Ramer said:
Are you using the wrong terminology? You have to use Odin and a PC to install the .tar. Also, the first boot into Lollipop can take about 20 minutes. You have to be patient. I see you posting in different threads and you seem to be digging deeper into a hole.
Are you using Odin and starting by downloading (to PC) the file in step #4? Then follow the remaining steps "exactly". Re-read those instructions and if you not already downloaded the needed files, do that first.
Click to expand...
Click to collapse
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
jackrabbit72380 said:
Yes I downloaded the files to the pc.
Im using odin3.07
in pda I add the file Odin'd the [ODIN][TAR][5.0] SM-G900P OA6 (Official!) - Full Restore (ROM, Modem, Kernel),
put phone in download mode.
flash file!
ODIN SAYS PASS
next phone reboots to samsung galaxy black screen with with blue letters at the top saying
RECOVERY BOOTING......
then boot loops there.
I CANT GET TO STEP 5
I am not able to boot to the rom or recovery
Click to expand...
Click to collapse
Try this: Do a battery pull, then put the phone in Download mode, hook up to PC and then open Odin and then Odin custom recovery, either twrp or Philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update Odin, there's a link to Odin 3.10.0 in my post. Let's see if we can get that far and go from there.
ramer said:
try this: Do a battery pull, then put the phone in download mode, hook up to pc and then open odin and odin custom recovery, either twrp or philz. Uncheck auto reboot in odin and once it passes, pull the battery, unplug and boot into recovery. Also, you might update odin, there's a link to odin 3.10.0 in my post. Let's see if we can get that far and go from there.
Click to expand...
Click to collapse
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
jackrabbit72380 said:
ok used odin 10
tryied everything you said exactly phone reboots on samsung galaxy s5 boot logo everytime. Whether i try booting to recovery or the rom.
Click to expand...
Click to collapse
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Ramer said:
Which recovery tar did you Odin? You pulled the battery after Odin said PASS, then unplugged the phone, put battery back in and immediately tried to get into recovery? If so, I'm stumped.
Click to expand...
Click to collapse
Yes I tryed
I pulled the battery after Odin said PASS
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
when ever i try and boot the rom the phone vibrates 2 times and resets.
when ever i try to boot to recovery
i get
recovery booting....
recovery is not seandroid enforcing
set warranty bit : recovery
then phone reboots.
then it trys to boot the rom.
and vibrates 2 times and resets.
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
jackrabbit72380 said:
Yes I tryed
kt_twrp_recovery_boa6_firmware.tar
and
openrecovery-twrp-2.8.4.0-klte
and
philz_touch_6.57.8-klte
NOTHING!
Im not new to using odin or flashing roms or recoverys i sort of know what im doing. not to sound cocky.
Im Stumped to!
Click to expand...
Click to collapse
I saw your post count, I knew you knew what you're doing, just wanted to double check everything. Sorry, I'm out of ideas. I did ask @tdunham to take a look at this thread, if he has some other ideas, but he's offline right now. Hopefully he'll check in later.
What about flashing back to an older version of android? Full tar flash.
---------- Post added at 12:38 AM ---------- Previous post was at 12:36 AM ----------
Like ne5, and nothing else, just see if you can get stock to boot, no messing around trying to flash recovery.
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Ramer said:
This is RWillco12's NE5 stock.. Have the phone in download mode and run the .exe
Thanks TD.
Click to expand...
Click to collapse
I tryied ni3 already
but as far as i know you cant downgrade the bootloader.
if i could flash just the bootloader for ota6 maybe that would help.
i will try downloading ne5 now but my last rom was running a nkd modem.
im going to try and flash G900P_NKD_FullRestore.tar in odin if that dont work ill try ne5
and will report back shortly.
well nkd full restore boots up to
unknowen error!
wait..
done!
udc start.
power reset or
unknown
upload mode.
this is the way i got it back from retech after they replaced my bezel and digitlizer and screen
i never had an issue with anything software wize before that.
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
tdunham said:
Have you tried flashing the phone without any sim cards inserted including the sprint card? You are flashing from a powered off state right? You know it wont work unless phone is powered off before going into download mode.
As a last resort attached is the pit file for the 16gb G900P. Unzip and put it into the pit section of odin and flash the stock firmware again. It will repartition the entire phone when it flashes the stock image.
Click to expand...
Click to collapse
Yes I was using the pit file and yes I know to go to download mode from power off state. and no sim card is in the phone.
flashing ne5 stock with fingers crossed.
brb
nope
is there any bootloaders only i can flash?
well tryed everything all it does is vibrate 2 times. same as be4 im dead in the water. i don't know what's wrong or what to do.
I have tryed everything i can think of.
I can boot to download mode and flash anything i want but nothing works.
no recovery. no rom.