I dropped my phone last night and now my phone has some light bleed in one of the corners.
Is there anything one can do to reduce the light bleed, short of replacing the entire display?
I also have light bleed on one of my corners due to a drop, the only option is to reseal the backlight and screen so it doesn't bleed out the side
The phone is ridged so bending it or tapping the other size won't help.similar to what you can do on a tablet
Related
Hallo, 3 different transormer tried and all have screen under the screen and shining 7/8 white pixels on black background, with a kind of scratches on the lcd panel emitting white light on the black, and the black is not solid like other colours but it has vertical stripes on the screen with different graduation of black. Obviously in all 3 pieces was present a strong light bleeding. The best way to check it is with a free program from the market called lcd test or maybe pixel test, put black screen on it in a dark room. Dust is well visible also with screen off, they are small withe pieces.
Any similar experiences?
I returned my first Transformer for a dust particle under the glass but in front of the screen - bang in the middle on the display so very distracting. I initially thought it was dead pixels but at an angle you could see the reality quite easily.
Luckily was able to exchange it the next day (gogo Mikro Anvika customer service) as they'd just got another batch come in the door - second one is flawless. Not other display problems other than the slight light bleed at a couple of points on screen edges on a black backgrounds - no big deal.
I dropped my phone, It fell out of my pocket in the gym today.
Now there is a red spot visible on the middle right screen link. I also noticed some light bleed from the left side. Can I fix this myself somehow?
I find it weird because the screen glass is in good condition, could the screen itself be permanently damaged?
It's pity as I still love this phone, and now it's damaged..
Thanks in advance
Yes, the top glass could be perfectly intact while screen beneath is damaged. I have seen this many times on Samsung phones that have been dropped.
Can't really either screen issue unless you replace the LCD.
Hi guys,
I have replaced the screen in my nexus 5 twice now. I purchased the screens from Amazon. The first screen on white backgrounds I would kind of see a square image on the screen in white. It kind of looked like the outline of the battery. It also had a few white spots on the screen. I tried loosening some of the screws but it didn't help. I contacted the seller and he recommended another replacement. He sent out another screen plus digitizer and frame.
The new screen arrived and I put it in. This screen is a lit better. I know only get 3 tiny white spots about the size of the screws in the nexus 5. Two look like they are where the battery would be inside the phone. The third is about 3 quarters of the way up the screen in the middle and slightly to the left. Why does this keep happening? Anyone got any ideas on what could be causing this?
One thing I have noticed is in the dark with the screen on around the sides of the phone in places I can see slivers of light shining around the screen. It seams that the tape that the screen provider used was not sticky enough. Could this be what is causing the white spots? The screen seams firmly attached at the top and bottom just the sides. I heated it up with a blow dryer and held the screen down till it cooled. It slowly goes back to the way it was.
Thanks,
Rocky
Light bleeding from the edges of the frame in a dark environment is not uncommon with 3rd party screens. Putting on a case can help a lot.
As for the white spots, it may be a manufacturing defect that has nothing to do with the way you assembled the phone.
So there is nothing that can be done about the white spots? I don't understand how both screens did this. Seams like there is a very high failure rate. From comparison and matching numbers s to the stock digitizer the replacement seams to be a stock digitizer and frame. The white spots are annoying.
It's possible that both screens came from the same production run. I used screens from aliexpress and only one had a bit of light bleed around the frame. Once I put on a case, you could not see the light bleed.
None of the replacement screens had any dead or stuck pixels or hot spots.
I noticed a defect while out in the sun today. In the sunlight I can see a crease/distortion effect in or under the glass in the bottom half of my screen. Maybe a third of an inch long. It's only visible to me in the sunlight or bright light. It's not on the outside of the glass though because I can't see it or feel it. Just wondering if anyone else has noticed it on their phone.
hey my htc u11 screen has bleeding on the lower edge a dead pixel and a pressure area on the lower part of the screen
do you have all of this or is it just me and do you think I should go for a replacement >
No issues here. No dead pixels and no light bleed.
Light bleed is mostly down the the screen being back-lit, not oled.