http://www.ebay.com.au/itm/Qi-Wirel...91?pt=LH_DefaultDomain_15&hash=item3aa5ed32fb
Is it possible?
My understanding is that the aluminum body precludes the possibility of wireless charging.
Sent from Tapatalk on my HTC One M9 or Tab4 10.1
htc one m9 is supported wireless charging?
No, it does not
Sent from Tapatalk on either my HTC One M9 or Tab4 10.1, it kinda depends
davidtm0 said:
No, it does not
Sent from Tapatalk on either my HTC One M9 or Tab4 10.1, it kinda depends
Click to expand...
Click to collapse
Makes ya' wonder what it is that they're selling.
Anything they can collect $ for.
Sent from my HTC One M9 on Tapatalk
BillTheCat said:
Makes ya' wonder what it is that they're selling.
Click to expand...
Click to collapse
look through the rest of the pictures in the listing.. looks like there is a QI charging receiver that plugs into the USB port, and it does advise you need an external case (to make it not visible)
nutmegy said:
look through the rest of the pictures in the listing.. looks like there is a QI charging receiver that plugs into the USB port, and it does advise you need an external case (to make it not visible)
Click to expand...
Click to collapse
I have one of those cards on my current OnePlus One and it does slip in nicely under a case, but it does not charge very fast (at least the version I had which was a 2nd generation type) -- not even close to what I was getting on my previous Nexus 4 and 5 devices. So I went back to usb charging and with the OPO's fast charging capabilities, charging a full phone in under 2 hours is pretty nice. It's suppose to be even faster now, so i can't wait to get my phone (today!)
nutmegy said:
look through the rest of the pictures in the listing.. looks like there is a QI charging receiver that plugs into the USB port, and it does advise you need an external case (to make it not visible)
Click to expand...
Click to collapse
Absolutely right.
From listing:
What's in the Package?
Qi Wireless Charging Stand
Micro USB cable (1.5m)
Micro USB cable (0.3m)
User Manual
Qi Receiver Card with Micro USB Connector (module)
Additional Notes
Device may get warm when charging (not uncomfortable).
Recommended use with a compatible case (optional).
Basically comes with something like this. Should slip under most cases.
http://www.amazon.com/DigiYes®-Wide...F8&qid=1429166740&sr=8-1&keywords=Qi+receiver
Most of the HTC phones doesn't support wireless charging even if it is known as universal charger.
Related
Has anyone found a spot to buy them? The ones on the Samsung site look different. And I want to make sure the end fits inside my case because the hole is designed for the cable that comes with the phone. I don't want to get into cutting the case or cable ends.
v3rn said:
Has anyone found a spot to buy them? The ones on the Samsung site look different. And I want to make sure the end fits inside my case because the hole is designed for the cable that comes with the phone. I don't want to get into cutting the case or cable ends.
Click to expand...
Click to collapse
Don't waste your money buying them from samsung. All usb cables are the same, just find a cheap one on amazon or monoprice. You could just look at pictures and find one that looks small enough to fit your case.
Edit- well I guess this is wrong. I've bought a few couple cheap usb cables and never had a problem but other people have.
Just to let you know...the tmobile mytouch usb fits into the neo case too. They might be cheaper too
http://www.amazon.com/gp/aw/d/B004MD87T2/ref=mp_s_a_1_27?qid=1369346910&sr=8-27&pi=SL75
Under 4 bucks shipped
Sent from my SGH-M919 using xda app-developers app
fly3rs28 said:
Don't waste your money buying them from samsung. All usb cables are the same, just find a cheap one on amazon or monoprice. You could just look at pictures and find one that looks small enough to fit your case.
Click to expand...
Click to collapse
I used to think the same thing, but this is absolutely not true. You can download the app Galaxy Charging Current and compare your charging rates with different cables. If you don't believe the app, you can start from a specific charge level and time the charge with the screen off and no apps running. There can be a significant difference. There are several posts throughout the GS4 forums if you search for the app name.
This isn't only true for the GS4 either. I tried using a USB 2.0 extension cable I bought in 03 or 04 to extend my Palm Pre touchstone, but the phone wouldn't consistently charge with the extension in place.
How's the charging speed on those? I know some cheaper cables don't charge as quickly.
fly3rs28 said:
Don't waste your money buying them from samsung. All usb cables are the same, just find a cheap one on amazon or monoprice. You could just look at pictures and find one that looks small enough to fit your case.
Click to expand...
Click to collapse
NOT all cables are the same!
The included one with the phone allows charging up to 1900mA. The one from the S3 (for example) will only charge up to 960. I have some that won't go over 460.
Sent from my SGH-M919 using xda premium
Its true about the varying speeds of usb cables. Here are some pics of the app with different usb plugs:
Pic 1: unplugged
Pic 2: white Samsung cable (stock)
Pic 3: htc evo 3d cable (stock)
Pic 4: htc evo 3d cable (aftermarket from car adapter)
I will grab the palm pre cables speed on Tuesday when I go to work.
Sent from the CHUUZ3D Galaxy via XDA Premium
So is it the cable that is affecting the charging current, or is it just the charger itself?
Thanks
v3rn said:
Has anyone found a spot to buy them? The ones on the Samsung site look different. And I want to make sure the end fits inside my case because the hole is designed for the cable that comes with the phone. I don't want to get into cutting the case or cable ends.
Click to expand...
Click to collapse
Wouldnt you be able to get a replacement cable from saumsung?
Foulwx said:
So is it the cable that is affecting the charging current, or is it just the charger itself?
Thanks
Click to expand...
Click to collapse
Both.
What is strange to me the phone with that app reports it's getting 1900mA when I use an old HTC charger capable of 1A (1000mA) @ 5V when using the OEM USB cable. Either that HTC charger's specs were grossly understated or the phone itself tries to sense electrical properties of the USB cable? Not sure if that last bit is even possible.
Anyone with knowledge on how the phone determines how much current to draw on a lower level? Kinda curious.
Also, there are sellers on eBay for the original S4 charging cable for something like $7, or same charging cable and 2A wall adapter for $10.
See for example: http://www.ebay.com/itm/230980370756
The part number they list (ETA-U90JWE) is the same as my OEM charger, that can do 2A @ 5 V.
CHUUZE said:
Its true about the varying speeds of usb cables. Here are some pics of the app with different usb plugs:
Pic 1: unplugged
Pic 2: white Samsung cable (stock)
Pic 3: htc evo 3d cable (stock)
Pic 4: htc evo 3d cable (aftermarket from car adapter)
I will grab the palm pre cables speed on Tuesday when I go to work.
Sent from the CHUUZ3D Galaxy via XDA Premium
Click to expand...
Click to collapse
With palm pre usb cable and power adapter
Sent from the CHUUZ3D Galaxy via XDA Premium
v3rn said:
Has anyone found a spot to buy them? The ones on the Samsung site look different. And I want to make sure the end fits inside my case because the hole is designed for the cable that comes with the phone. I don't want to get into cutting the case or cable ends.
Click to expand...
Click to collapse
:BUMP:
Also looking for a 1900mA charger/usb chord combo. Found 2 "OEM" fakes on Amazon (reviews reported fake), and can't just buy, and hope for the best on eBay. Looking to see if someone has bought, tried, and tested a charger/chord combo that does 1900mA from a reliable source. I'm not paying $40+ for a charger/usb chord from samsung. There's got to be an alternative.
Newegg.com sells them.
I've ordered this charger + cable (aware of the risk of fake, will be comparing to my included/OEM), this micro USB cable, and this micro USB cable.
Also waiting on this car charger.
Using Battery Monitor Widget app to get mA readings during charge.
Will report back with results as I receive and test.
I bought this, since my S4 came with the european one, this is 100% original (Same that comes with the S4 and Note 2):
http://www.ebay.com/itm/Samsung-Uni...A_Chargers&hash=item48575436ad#ht_5253wt_1170
http://www.amazon.com/dp/B009YDFX7Y/ref=cm_sw_r_an_am_ap_am_us?ie=UTF8
Bought that one from seller1on1. Came in today. Cable is shorter than OEM but has the same current
Sent from my SGH-M919 using Tapatalk 2
FYI regarding my post above, I've started a separate thread since this one has gone a bit off-topic. Sorry OP!
[Face]TigerBite said:
:BUMP:
Also looking for a 1900mA charger/usb chord combo. Found 2 "OEM" fakes on Amazon (reviews reported fake), and can't just buy, and hope for the best on eBay. Looking to see if someone has bought, tried, and tested a charger/chord combo that does 1900mA from a reliable source. I'm not paying $40+ for a charger/usb chord from samsung. There's got to be an alternative.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=44181182&postcount=2
bo8 said:
I've ordered ... this micro USB cable.
Click to expand...
Click to collapse
Wasting money here ... finally received above cable via DX.com and nope, only transmits 700 mA max to the S4. fakkkk
So I purchased both the white Samsung Wireless charger and the black Verizon charger. My thoughts:
I'm upset that they both only charge at 640. This is HALF what a normal USB charges at. Also, the Samsung uses a standard Micro USB as power supply, while the Veirzion has a special adapter (annoying). Also, the Samsung is more sensitive where the device is placed on the pad, has to be directly in one spot or it won't charge. The Verizion has a much larger charging area.
So my question is -
1) Are all wireless charging bases only charging at 640?
2) is there a better charger that used micro USB?
Thanks,
Normal USB 2.0 charges at around 500Mah. Some special ports offer more power.
The stock Samsung wall charger, can output UP TO 2amps
My wireless charging receiver, a generic eBay one claims up to 1amp, and i usually get between 400 and 800 depending on what im doing.
The base itself, I think sends only up to 1amp, so the real limitation is in the receiver in the phone.
Second part of your question, are you asking about the charging plate?
In terms of what charger plate to get, Is the standard micro USB plug so important to you ?
there are some pretty handy ones, such as the Panasonic QE-TM101 that offer a feature where you can place the phone anywhere on the pad and the charge will start.
I cant comment on the Verizon one because im not from america
CountParadox said:
Normal USB 2.0 charges at around 500Mah. Some special ports offer more power.
The stock Samsung wall charger, can output UP TO 2amps
My wireless charging receiver, a generic eBay one claims up to 1amp, and i usually get between 400 and 800 depending on what im doing.
The base itself, I think sends only up to 1amp, so the real limitation is in the receiver in the phone.
Second part of your question, are you asking about the charging plate?
In terms of what charger plate to get, Is the standard micro USB plug so important to you ?
there are some pretty handy ones, such as the Panasonic QE-TM101 that offer a feature where you can place the phone anywhere on the pad and the charge will start.
I cant comment on the Verizon one because im not from america
Click to expand...
Click to collapse
Yeah, I'd like to get a pad that used the standard Micro USB.
Thanks for the advice!
seanvree said:
So I purchased both the white Samsung Wireless charger and the black Verizon charger. My thoughts:
I'm upset that they both only charge at 640. This is HALF what a normal USB charges at. Also, the Samsung uses a standard Micro USB as power supply, while the Veirzion has a special adapter (annoying). Also, the Samsung is more sensitive where the device is placed on the pad, has to be directly in one spot or it won't charge. The Verizion has a much larger charging area.
So my question is -
1) Are all wireless charging bases only charging at 640?
2) is there a better charger that used micro USB?
Thanks,
Click to expand...
Click to collapse
I have been looking for the same answer you are, I bought a off brand wireless charger off eBay and that charges at 640 as well. So I'm guessing it's the norm right now unless I'm wrong.
But I really wanted a wireless charger for bedside so even if it's slow I'm okay with it so far.
Sent from my SGH-M919 using xda app-developers app
That's expected. 640 is max rate wirelessly. I don't have the Verizon pad, but have several of the Samsung ones (thanks to the 50% off coupons) and none are sensitive to where you place the phone.
chamberc said:
That's expected. 640 is max rate wirelessly. I don't have the Verizon pad, but have several of the Samsung ones (thanks to the 50% off coupons) and none are sensitive to where you place the phone.
Click to expand...
Click to collapse
I also have the white Samsung pad, and it's significantly more sensitive that the Verizon one. Can you give me a link to which one you've bought.
seanvree said:
So I purchased both the white Samsung Wireless charger and the black Verizon charger.
I
Thanks,
Click to expand...
Click to collapse
What's the Verizon one? Can you provide link?
cbb77 said:
What's the Verizon one? Can you provide link?
Click to expand...
Click to collapse
I can't because it's not sold anymore.
seanvree said:
I also have the white Samsung pad, and it's significantly more sensitive that the Verizon one. Can you give me a link to which one you've bought.
Click to expand...
Click to collapse
It's the only one for the s4 on Samsung.com
chamberc said:
It's the only one for the s4 on Samsung.com
Click to expand...
Click to collapse
Yeah, I have that one and in my opinion it's pretty sensitive where you place the phone.
Thinking about snagging this one:
http://www.amazon.com/Koolpad-Wirel...TF8&colid=3616U4BBPMOR4&coliid=I2QTGCL6YI3QYJ
Since the N9 does not have Qi wireless charging, it would be super if a cover with qi enabled. This exists for other devices and I hope for this device too. Any ideas?
To answer myself: You could of course buy a QI reciever and a slim case: http://www.amazon.com/s/ref=nb_sb_n...ireless Charging Receiver film for micro-USB
If only something like that exists with a micro SD slot along with being able to mod the N9 to have Qi charging. Problem solved.
That doesn't work with most tablets given it's low output. I can test it when my tablet arrives this week to confirm.
I can confirm the microusb adapter pad does charge. I did a few %. Seems to work fine but cannot comment on overall speed. 650mah output listed on the back of my Qi pad adapter.
Sean09 said:
I can confirm the microusb adapter pad does charge. I did a few %. Seems to work fine but cannot comment on overall speed. 650mah output listed on the back of my Qi pad adapter.
Click to expand...
Click to collapse
If you plan on continued use of the Qi adapter could you report on it's usefulness beyond your initial impression? It's nice to know it works but is it worth getting?
Any suggestion as to brand is also appreciated.
I bought this qi receiver from Amazon
http://www.amazon.com/gp/product/B00JIN22JM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
It says it's charging for a few seconds, but then it stops... It's useless
Anyone know of a qi receiver that works with N9?
juancferrer said:
I bought this qi receiver from Amazon
http://www.amazon.com/gp/product/B00JIN22JM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
It says it's charging for a few seconds, but then it stops... It's useless
Anyone know of a qi receiver that works with N9?
Click to expand...
Click to collapse
I ordered a different one but had the same results (only charges for a few seconds).
BLUBOON(TM) Universal Qi Wireless Charging Receiver Wireless Charger Receiver Film for Micro-usb of All Android Mobile (Narrow-interface Down)
http://www.amazon.com/gp/product/B00MN3RROY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I have bought my qi receiver from ebay, $7.66.
earlybirdsavings-ebs3 is the seller (sorry, not allowed to write the link) and it works perfectly.
JMM2009 said:
If only something like that exists with a micro SD slot along with being able to mod the N9 to have Qi charging. Problem solved.
Click to expand...
Click to collapse
And a usb port for OTG
Will the tablet stop charging when reaching 100% or do we risk damaging tablet? Is this controlled by tablet or charger?
Aijeohc said:
Friends
Good New for you all
Day before yesterday i purchased Qi wireless charger for our device at reasonable price and if you also want to buy wireless charger for your device then we know where you can buy online with 1 year warranty
Thanks
Click to expand...
Click to collapse
Yep, I pegged it in another thread. This dude IS a spammer.
Does the Nexus 9 even support QI? I guess not.
Sent from my Nexus 9
No
Sent from my SHIELD Tablet using Tapatalk
Was anyone successfull? I do not want to buy the Nexus 9 as long it does not support Qi.
mgutt said:
Was anyone successfull? I do not want to buy the Nexus 9 as long it does not support Qi.
Click to expand...
Click to collapse
It does NOT natively support Qi charging. The Nexus 9 uses a nVidia SoC, not Qualcomm (or the Samsung Exynos CPU). None of the current nVidia SoC's support wireless charging. Attempting to use one of those jankety cases with Qi support would be a laughing matter. Call me in a month when that 6700mAh battery has finally finished charging.
There are Qi receiver available charging with 1000 mAh. And 6 hours of charging would be really ok for me.
Sorry for bringing this back from the dead but I need some help.
I looked at a few of the links posted above and it looks like you can ADD Qi wireless charging to the device with a sick on pad that inhabits the micro USB port permanently. Is that right? When this is plugged into the stock USB port can you still have things plugged in via OTG like flash drives, keyboards, etc?
I don't care if it charges slow just so long as it keeps up with demand from the tablet. This would be a fixed installation in a truck as the headunit so it would ALWAYS have power when the vehicle is on.
---------- Post added at 06:17 PM ---------- Previous post was at 06:07 PM ----------
Specifically, I'm looking at this model listed below. The Nexus 9 is a "narrow side down" USB device and this one CLAIMS to output 1000mAh. Would that be enough to keep up with demand?
http://www.amazon.com/gp/product/B0...rue&ref_=ox_sc_act_title_1&smid=A11ID9O6IRX38
Has anybody seen a desk stand with quick charge 2.0?
I don't want anything where I have to put the cable on manually!
charging stand
VicTsing Desktop USB Data Sync Charging Docking Station Cradle Charger Adapter Holder Mount For HTC ONE
It was advertised on Amazon for the M8, but I asked and sure enough it works for the M9, I ordered another one and am very happy with them both, very easy to move around.
DIDHTC said:
VicTsing Desktop USB Data Sync Charging Docking Station Cradle Charger Adapter Holder Mount For HTC ONE
It was advertised on Amazon for the M8, but I asked and sure enough it works for the M9, I ordered another one and am very happy with them both, very easy to move around.
Click to expand...
Click to collapse
Do you mean this one? http://www.victsing.com/2015/11/18/...er-adapter-holder-mount-for-htc-one-m8-black/
It has no quick charge 2.0 functionality.
Gesendet von meinem Nexus 7 mit Tapatalk
All I know is it takes less than 5 minutes to charge 20% (approx). I have it plugged into a lutron usb in wall combo usb plug. The cord is fast charging because when I used another cord the phone told me it was slow charging, I plugged the cord that came with it in again and it gave no warning.
DIDHTC said:
All I know is it takes less than 5 minutes to charge 20% (approx). I have it plugged into a lutron usb in wall combo usb plug. The cord is fast charging because when I used another cord the phone told me it was slow charging, I plugged the cord that came with it in again and it gave no warning.
Click to expand...
Click to collapse
Does it work with a case on the phone? If so, what kind of case are you using? How thick is it?
feralicious said:
Does it work with a case on the phone? If so, what kind of case are you using? How thick is it?
Click to expand...
Click to collapse
This is the case I have on my HTC
Fosmon® HTC One M9 / Hima 2015 (DURA-FRO) Ultra Slim Flexible TPU Gel Case Cover - Fosmon Retail Packaging (Clear)
(sorry still under my 10 post thing, so couldn't post the link)
It has a little bit to spare as far as sitting in the holder goes. It works for me, I've had complements on it, although it *is* cheap, because it is clear it does not look cheap, it comes off easily and suits my purpose.
I simply use one of these with a QC2 charger plugged in. It is technically for the M8, but the M9 fits as well. It also has a removable insert to allow for a case as well. Search around, it was only $16 when I bought it.
l7777 said:
I simply use one of these with a QC2 charger plugged in. It is technically for the M8, but the M9 fits as well. It also has a removable insert to allow for a case as well. Search around, it was only $16 when I bought it.
Click to expand...
Click to collapse
The problem is that these docks have its own condensators etc. (lets say power supply) which normally don't let "pass" the voltage of QC2. QC2 goes up to 12 V, the normal docks allow only 5 V.
Are you sure you get QC2 voltage with this dock?
StephanSch said:
The problem is that these docks have its own condensators etc. (lets say power supply) which normally don't let "pass" the voltage of QC2. QC2 goes up to 12 V, the normal docks allow only 5 V.
Are you sure you get QC2 voltage with this dock?
Click to expand...
Click to collapse
Why would they bother with that? It would cost more.
Out of curiosity I just cracked it open. Nothing but a wire connecting the female plug with the male plug. I haven't put it to the test lately but it would charge quicker than the standard charger when I was using it frequently.
l7777 said:
Why would they bother with that? It would cost more.
Out of curiosity I just cracked it open. Nothing but a wire connecting the female plug with the male plug. I haven't put it to the test lately but it would charge quicker than the standard charger when I was using it frequently.
Click to expand...
Click to collapse
Great to see, thanks a lot.
Maybe some do it to be sure that the phone gets the right voltage with a wrong or damaged power supply, or if the power supply is included there is more space in the dock. I don't know but had some that are only for 5 V (also stood at the power port).
Gesendet von meinem Nexus 7 mit Tapatalk
Or it is required in Germany because on my search now most have the voltage of 5 V in the description.
Yours has 16 EUR to deliver to Germany, so I just started a search again.
Gesendet von meinem Nexus 7 mit Tapatalk
I was browsing on Aliexpress.com than I found this Qi wireless charging receiver and charging Pad for Nexus 6P. I don't know if its good or not, or if it has Quick Charging function(probably not) or not. Just want to share it to everyone that's looking for something like this.
Thanks for this. But there is already a thread about this...
http://forum.xda-developers.com/showthread.php?t=3219394
Sent from my Nexus 6P using Tapatalk
According to the page it outputs 5V at 1A, definitely not fast charging... but I really wouldn't expect that on something like this.
I used to have a similar style micro USB QI charger I used in the past and it worked fine on my Micro USB devices.
For me quick charging is more important to me than the convenience of wireless charging. Unless you plan to use wireless charging exclusively I find having to take off and put on the adapter often a hassle.
Still nice find for those that really want wireless charging.
Type-C Qi Wireless Charger UGPine Wireless Receiver Wireless Charging For Xiaomi 4C/4S/5 Meizu Pro5 Pro6 Oneplus Sony Huawei P9
http://s.aliexpress.com/iqQrYFbA
(from AliExpress Android)
Sent from my Nexus 6P using Tapatalk
A-store Qi Wireless Charger Pad + Type-C Wireless Charger Sticker Receiver for Huawei P9/Google Nexus 6P; HTC 10; LG G5/LG Nexus 5X; OnePlus 2 Two; https://www.amazon.com/dp/B01FMJ4UJU/ref=cm_sw_r_other_apa_LqIxxbE0GPCP4
Sent from my Nexus 6P using Tapatalk
Does it work? Did you tested it already? Can you give me a little feedback? Thanks!
Ditto
Sent from my Nexus 6P using Tapatalk
Don't know if this is even possible, but it would be perfect if there was one of these qi receivers with USB C that had a kind of pass through USB C plug, so that you could have the qi receiver plugged into the phone, but still be able to plug in a USB C cable from the wall when you want the faster charger.
bluegizmo83 said:
Don't know if this is even possible, but it would be perfect if there was one of these qi receivers with USB C that had a kind of pass through USB C plug, so that you could have the qi receiver plugged into the phone, but still be able to plug in a USB C cable from the wall when you want the faster charger.
Click to expand...
Click to collapse
That wouldn't be possible without breaking the USB spec, and making it really bulky. These little qi receivers are easy to unplug, so that shouldn't be a big concern.
Pilz said:
That wouldn't be possible without breaking the USB spec, and making it really bulky. These little qi receivers are easy to unplug, so that shouldn't be a big concern.
Click to expand...
Click to collapse
What about if you were to stick the qi receiver to the back of the phone and then put a case on over the phone and receiver, can you still unplug it fairly easily when you want to use the USB wall charger?
bluegizmo83 said:
What about if you were to stick the qi receiver to the back of the phone and then put a case on over the phone and receiver, can you still unplug it fairly easily when you want to use the USB wall charger?
Click to expand...
Click to collapse
That's what I was implying rather than using a pass through. There's still a possibility the receiver will not work if directly touching the phone depending on how it's made, so once it can be confirmed working that should be fine.
Pilz said:
That's what I was implying rather than using a pass through. There's still a possibility the receiver will not work if directly touching the phone depending on how it's made, so once it can be confirmed working that should be fine.
Click to expand...
Click to collapse
Oh ok. I may go ahead and order one and give it a try. I just thought maybe with a case on over it, that the case may pinch the cable of the receiver and not allow you to be able to unplug it from the phones USB port without removing the case first (which would be a pain).
bluegizmo83 said:
Oh ok. I may go ahead and order one and give it a try. I just thought maybe with a case on over it, that the case may pinch the cable of the receiver and not allow you to be able to unplug it from the phones USB port without removing the case first (which would be a pain).
Click to expand...
Click to collapse
I might order one too since I have a plethora of wireless chargers for my S7 Edge. I'm hoping they made it correctly so it can be in direct contact with the phone (I.e. jts shielded correctly)
I have a bunch of chargers as well from my s6. So excited to get this and use them again.
Sent from my Nexus 6P using Tapatalk
OK so got mine today and works as advertised. Tonight will be the first night to test. It's slower that's for sure when it comes to charging. The nub that plugs in isn't too big, which is nice. Takes some getting used to.
If you got time on your hands and have a wireless charge handy all the times then I would recommend this. If you dont have time then stick with usb c charging ad it's faster.
Sent from my Nexus 6P using Tapatalk
Does it heat up at all? Would it be safe under a TPU case? I've ordered one along with a N6P so just waiting for the deliveries now.
Doesn't heat up, at least not that I have observed. I am using a tpu case. The fosmon cases and not an issue at all with charging.
Sent from my Nexus 6P using Tapatalk
I've got my receiver and it looks pretty good. The plug is a bit thicker than I expected, but then it seems very sturdy. Unfortunately I don't have the actual handset yet so still waiting to use it. Hopefully it will slot in nicely behind a Diztronic case.
Pictures with a case around it would be nice
Sent from my Nexus 6P using Tapatalk
CoopZor said:
Pictures with a case around it would be nice
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Give me a bit and I can post some.
Sent from my Nexus 6P using Tapatalk