Since the N9 does not have Qi wireless charging, it would be super if a cover with qi enabled. This exists for other devices and I hope for this device too. Any ideas?
To answer myself: You could of course buy a QI reciever and a slim case: http://www.amazon.com/s/ref=nb_sb_n...ireless Charging Receiver film for micro-USB
If only something like that exists with a micro SD slot along with being able to mod the N9 to have Qi charging. Problem solved.
That doesn't work with most tablets given it's low output. I can test it when my tablet arrives this week to confirm.
I can confirm the microusb adapter pad does charge. I did a few %. Seems to work fine but cannot comment on overall speed. 650mah output listed on the back of my Qi pad adapter.
Sean09 said:
I can confirm the microusb adapter pad does charge. I did a few %. Seems to work fine but cannot comment on overall speed. 650mah output listed on the back of my Qi pad adapter.
Click to expand...
Click to collapse
If you plan on continued use of the Qi adapter could you report on it's usefulness beyond your initial impression? It's nice to know it works but is it worth getting?
Any suggestion as to brand is also appreciated.
I bought this qi receiver from Amazon
http://www.amazon.com/gp/product/B00JIN22JM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
It says it's charging for a few seconds, but then it stops... It's useless
Anyone know of a qi receiver that works with N9?
juancferrer said:
I bought this qi receiver from Amazon
http://www.amazon.com/gp/product/B00JIN22JM/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
It says it's charging for a few seconds, but then it stops... It's useless
Anyone know of a qi receiver that works with N9?
Click to expand...
Click to collapse
I ordered a different one but had the same results (only charges for a few seconds).
BLUBOON(TM) Universal Qi Wireless Charging Receiver Wireless Charger Receiver Film for Micro-usb of All Android Mobile (Narrow-interface Down)
http://www.amazon.com/gp/product/B00MN3RROY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
I have bought my qi receiver from ebay, $7.66.
earlybirdsavings-ebs3 is the seller (sorry, not allowed to write the link) and it works perfectly.
JMM2009 said:
If only something like that exists with a micro SD slot along with being able to mod the N9 to have Qi charging. Problem solved.
Click to expand...
Click to collapse
And a usb port for OTG
Will the tablet stop charging when reaching 100% or do we risk damaging tablet? Is this controlled by tablet or charger?
Aijeohc said:
Friends
Good New for you all
Day before yesterday i purchased Qi wireless charger for our device at reasonable price and if you also want to buy wireless charger for your device then we know where you can buy online with 1 year warranty
Thanks
Click to expand...
Click to collapse
Yep, I pegged it in another thread. This dude IS a spammer.
Does the Nexus 9 even support QI? I guess not.
Sent from my Nexus 9
No
Sent from my SHIELD Tablet using Tapatalk
Was anyone successfull? I do not want to buy the Nexus 9 as long it does not support Qi.
mgutt said:
Was anyone successfull? I do not want to buy the Nexus 9 as long it does not support Qi.
Click to expand...
Click to collapse
It does NOT natively support Qi charging. The Nexus 9 uses a nVidia SoC, not Qualcomm (or the Samsung Exynos CPU). None of the current nVidia SoC's support wireless charging. Attempting to use one of those jankety cases with Qi support would be a laughing matter. Call me in a month when that 6700mAh battery has finally finished charging.
There are Qi receiver available charging with 1000 mAh. And 6 hours of charging would be really ok for me.
Sorry for bringing this back from the dead but I need some help.
I looked at a few of the links posted above and it looks like you can ADD Qi wireless charging to the device with a sick on pad that inhabits the micro USB port permanently. Is that right? When this is plugged into the stock USB port can you still have things plugged in via OTG like flash drives, keyboards, etc?
I don't care if it charges slow just so long as it keeps up with demand from the tablet. This would be a fixed installation in a truck as the headunit so it would ALWAYS have power when the vehicle is on.
---------- Post added at 06:17 PM ---------- Previous post was at 06:07 PM ----------
Specifically, I'm looking at this model listed below. The Nexus 9 is a "narrow side down" USB device and this one CLAIMS to output 1000mAh. Would that be enough to keep up with demand?
http://www.amazon.com/gp/product/B0...rue&ref_=ox_sc_act_title_1&smid=A11ID9O6IRX38
Related
Hi
Im searching for a car charger for the nexus 4 that will charge the device even on navigation running...I now that the Motorola Rapid car charger was good with the galaxy nexus.I dont know if itS ok with the nexus 4 because on the LG charger it sayS 1.2A?I read that the Bracketron Universal Dual USB Car Adapte 2.1A will just work as AC charger if plugged in with a USB charging only cable...but i cant find those cable to order online here i Canada...and i dont wanna do it myself and modify a regular usb cable ...Soo if someone can help me it would be much appreciated.
aldenh said:
Hi
Im searching for a car charger for the nexus 4 that will charge the device even on navigation running...I now that the Motorola Rapid car charger was good with the galaxy nexus.I dont know if itS ok with the nexus 4 because on the LG charger it sayS 1.2A?I read that the Bracketron Universal Dual USB Car Adapte 2.1A will just work as AC charger if plugged in with a USB charging only cable...but i cant find those cable to order online here i Canada...and i dont wanna do it myself and modify a regular usb cable ...Soo if someone can help me it would be much appreciated.
Click to expand...
Click to collapse
You dont have to have a modded cable if your car charger already has the data pins shorted. Im using the motorola rapid charger too and it works fine, it will charge your phone as AC and give enough power to recharge the battery with navigation on. if you want something a bit better you can try this one , they ship to canada. My rapid charger broke so i bought it a few days ago. Reviews says the trident will give around 8-900mA, the moto charger outputs around 6-700mA.
I would only buy a premium brand here. If you see how no name mains adaptors are made... the risk of blowing up something expensive is just too big.
I wnent with the Sony AN-400 / 401, because it is rated at 1.2 amps exactly, is small, and was reported to work fine.
For some regulator disasters:
http://hackaday.com/2012/08/15/buying-cheaper-electronics-and-not-saving-money/ <- a USB car charger without components, putting 12 volts straight on USB.
http://www.youtube.com/watch?v=wi-b9k-0KfE <- teardown of imitation apple mains adapter, showing no output protection and very little gap between mains voltage and output circuit. Good info, but style of presentation is not my cup of tea.
So that is why I went with a premium brand.
that's one charger from one factory that some guy that didnt know what he was doing and ordered thousands, without testing them. He probably went for the 25 cent super deluxe model...
Well reviewed chargers from xda members here and not to mention the hundreds of people on amazon are a safe bet. Here's a 8+page thread on the charger i linked. Your premium brand name sony charger is made in china too.
aldenh said:
Hi
Im searching for a car charger for the nexus 4 that will charge the device even on navigation running...I now that the Motorola Rapid car charger was good with the galaxy nexus.I dont know if itS ok with the nexus 4 because on the LG charger it sayS 1.2A?I read that the Bracketron Universal Dual USB Car Adapte 2.1A will just work as AC charger if plugged in with a USB charging only cable...but i cant find those cable to order online here i Canada...and i dont wanna do it myself and modify a regular usb cable ...Soo if someone can help me it would be much appreciated.
Click to expand...
Click to collapse
1. Get a bullet-type 2.1 amp USB charger:
http://www.amazon.com/iFlash-Lighter-Charger-Adapter-Output/dp/B008LM45I2/ref=pd_sbs_misc_7
2. Add a "charge only" USB cable:
http://www.amazon.com/Mediabridge-U...357979634&sr=1-11&keywords=usb+charging+cable
This combo charges a Nexus 7 (which requires even more current) with navigation on!
neotekz said:
that's one charger from one factory that some guy that didnt know what he was doing and ordered thousands, without testing them. He probably went for the 25 cent super deluxe model...
Well reviewed chargers from xda members here and not to mention the hundreds of people on amazon are a safe bet. Here's a 8+page thread on the charger i linked. Your premium brand name sony charger is made in china too.
Click to expand...
Click to collapse
Thanks so much for the link.So is this Trident limited charger same as the Powergen dual usb??I mean is the quality ok???this charger has the data pins shorted and comes with a regular micro usb cable?
M3Rocket said:
1. Get a bullet-type 2.1 amp USB charger:
http://www.amazon.com/iFlash-Lighter-Charger-Adapter-Output/dp/B008LM45I2/ref=pd_sbs_misc_7
2. Add a "charge only" USB cable:
http://www.amazon.com/Mediabridge-U...357979634&sr=1-11&keywords=usb+charging+cable
This combo charges a Nexus 7 (which requires even more current) with navigation on!
Click to expand...
Click to collapse
That looks ok,but I cant find a good quality usb charge only cable that ships to canada :
I have a el cheapo usb charger from ebay and I used my usb cable that came with the phone...and when i pluged it in it switches from AC charge to USB ever couple of seconds back and forth...so I want to try something different.
If you're into rooting and custom kernels, most of them have a fastcharge option where you don't need to have a special usb cable, or, attempt to short the D- and D+ lines.
Monoprice has a 2.1A bullet charger for a bit cheaper:
http://www.monoprice.com/products/p...=10826&cs_id=1082603&p_id=8858&seq=1&format=2
aldenh said:
Thanks so much for the link.So is this Trident limited charger same as the Powergen dual usb??I mean is the quality ok???this charger has the data pins shorted and comes with a regular micro usb cable?
Click to expand...
Click to collapse
i cant say for sure until i get it sometime next week but i think so. im in canada too and couldnt find the powergen anywhere that would ship here.
There are some other brands that are good too but i like this one cause it's dual usb like my old moto rapid charger. If you dont need that you can get some smaller ones that will work just make sure they are well review and can output around 1A. The one that bfspider spider recommends is a good bet too since monoprice is pretty reputable store and will ship to canada.
aldenh said:
I have a el cheapo usb charger from ebay and I used my usb cable that came with the phone...and when i pluged it in it switches from AC charge to USB ever couple of seconds back and forth...so I want to try something different.
Click to expand...
Click to collapse
You can try to mod this one in the mean time, just take it apart and attach the two data pins(they are the two middle ones). Solder is best but if you cant you can just use pilers and bend the pins until they touch. i did this with a few of my chargers too and it works to make them AC but it wont increase the output if its low to begin with.
neotekz said:
i cant say for sure until i get it sometime next week but i think so. im in canada too and couldnt find the powergen anywhere that would ship here.
There are some other brands that are good too but i like this one cause it's dual usb like my old moto rapid charger. If you dont need that you can get some smaller ones that will work just make sure they are well review and can output around 1A. The one that bfspider spider recommends is a good bet too since monoprice is pretty reputable store and will ship to canada.
Click to expand...
Click to collapse
Once again thank you so much.I found the Trident charger here with free shiping to USA and Canada and good reviews
I just bought a "Samsung Car Adapter" with this output: 5V 1A
Is this a good CAR adapter for Nexus 4?
The Nexus 4 "LG travel charger", has this Output: 5V 1.2A
I wan't to use this Samsung Car Adapter while using GPS on the Car or playing games on the Car without lowering the battery.
thesebastian said:
I just bought a "Samsung Car Adapter" with this output: 5V 1A
Is this a good CAR adapter for Nexus 4?
The Nexus 4 "LG travel charger", has this Output: 5V 1.2A
I wan't to use this Samsung Car Adapter while using GPS on the Car or playing games on the Car without lowering the battery.
Click to expand...
Click to collapse
I have the same. Works perfect
Sent from my sexy Nexus 4
M3Rocket said:
1. Get a bullet-type 2.1 amp USB charger:
http://www.amazon.com/iFlash-Lighter-Charger-Adapter-Output/dp/B008LM45I2/ref=pd_sbs_misc_7
2. Add a "charge only" USB cable:
http://www.amazon.com/Mediabridge-U...357979634&sr=1-11&keywords=usb+charging+cable
This combo charges a Nexus 7 (which requires even more current) with navigation on!
Click to expand...
Click to collapse
FYI, this adapter should allow most existing "iPad" chargers (1.2A or higher) + any USB cable to work well with the Nexus 4.
The problem is that Apple products deviate from USB charging standards. As a result, most chargers try to be compatible with iDevices and also deviate from the standards. So when standard-compliant devices try to follow the standards, the chargers refuse to follow the standards, and the devices get upset with each other. Fortunately, they fall back and settle on a lower-power charging rate.
If you want to buy chargers that are very clear on what they support, check out MediaBridge (also available on Amazon).
Why does a bog standard USB cable work in the car for me? Using a proper off-line sat nav my phone was fully charged
neotekz said:
You dont have to have a modded cable if your car charger already has the data pins shorted. Im using the motorola rapid charger too and it works fine, it will charge your phone as AC and give enough power to recharge the battery with navigation on. if you want something a bit better you can try this one , they ship to canada. My rapid charger broke so i bought it a few days ago. Reviews says the trident will give around 8-900mA, the moto charger outputs around 6-700mA.
Click to expand...
Click to collapse
So i got that Trident charger that you recommended....the quality looks good...but when I tried it in the 1A and 2A port with the usb cable that comes with it,it shows USB charging but when I use the HTC usb cable that came with my HTC one S it shows AC charging....its so confusing and I just dont get it....that HTC cable is a sync and charge cable.
The generic T-Mobile car charger available at T-Mobile stores charges just fine. I believe it is at least 1 amp. Its black, has a purple white small led indicator when charging. The USB end looks like a little block and the cord is an accordion type and it also has a a female USB slot in it to plug something else in at the same time but I believe whatever USB cord you plug in there only charges at .5 amp. With this charger I can run navigation and Bluetooth and Pandora and message at the same time and it will charge.
Sent from my often RMA'd Nexus 4, So that I can use the one I'm using now when I get the 6th and hopefully final one.
I just dont get it why does it with one cable show USB charging and with the other HTC cable AC charging?:S
Sent from my Nexus 4 using xda app-developers app
You're awesome.
Vitamin_D said:
You're awesome.
Click to expand...
Click to collapse
????
So I purchased both the white Samsung Wireless charger and the black Verizon charger. My thoughts:
I'm upset that they both only charge at 640. This is HALF what a normal USB charges at. Also, the Samsung uses a standard Micro USB as power supply, while the Veirzion has a special adapter (annoying). Also, the Samsung is more sensitive where the device is placed on the pad, has to be directly in one spot or it won't charge. The Verizion has a much larger charging area.
So my question is -
1) Are all wireless charging bases only charging at 640?
2) is there a better charger that used micro USB?
Thanks,
Normal USB 2.0 charges at around 500Mah. Some special ports offer more power.
The stock Samsung wall charger, can output UP TO 2amps
My wireless charging receiver, a generic eBay one claims up to 1amp, and i usually get between 400 and 800 depending on what im doing.
The base itself, I think sends only up to 1amp, so the real limitation is in the receiver in the phone.
Second part of your question, are you asking about the charging plate?
In terms of what charger plate to get, Is the standard micro USB plug so important to you ?
there are some pretty handy ones, such as the Panasonic QE-TM101 that offer a feature where you can place the phone anywhere on the pad and the charge will start.
I cant comment on the Verizon one because im not from america
CountParadox said:
Normal USB 2.0 charges at around 500Mah. Some special ports offer more power.
The stock Samsung wall charger, can output UP TO 2amps
My wireless charging receiver, a generic eBay one claims up to 1amp, and i usually get between 400 and 800 depending on what im doing.
The base itself, I think sends only up to 1amp, so the real limitation is in the receiver in the phone.
Second part of your question, are you asking about the charging plate?
In terms of what charger plate to get, Is the standard micro USB plug so important to you ?
there are some pretty handy ones, such as the Panasonic QE-TM101 that offer a feature where you can place the phone anywhere on the pad and the charge will start.
I cant comment on the Verizon one because im not from america
Click to expand...
Click to collapse
Yeah, I'd like to get a pad that used the standard Micro USB.
Thanks for the advice!
seanvree said:
So I purchased both the white Samsung Wireless charger and the black Verizon charger. My thoughts:
I'm upset that they both only charge at 640. This is HALF what a normal USB charges at. Also, the Samsung uses a standard Micro USB as power supply, while the Veirzion has a special adapter (annoying). Also, the Samsung is more sensitive where the device is placed on the pad, has to be directly in one spot or it won't charge. The Verizion has a much larger charging area.
So my question is -
1) Are all wireless charging bases only charging at 640?
2) is there a better charger that used micro USB?
Thanks,
Click to expand...
Click to collapse
I have been looking for the same answer you are, I bought a off brand wireless charger off eBay and that charges at 640 as well. So I'm guessing it's the norm right now unless I'm wrong.
But I really wanted a wireless charger for bedside so even if it's slow I'm okay with it so far.
Sent from my SGH-M919 using xda app-developers app
That's expected. 640 is max rate wirelessly. I don't have the Verizon pad, but have several of the Samsung ones (thanks to the 50% off coupons) and none are sensitive to where you place the phone.
chamberc said:
That's expected. 640 is max rate wirelessly. I don't have the Verizon pad, but have several of the Samsung ones (thanks to the 50% off coupons) and none are sensitive to where you place the phone.
Click to expand...
Click to collapse
I also have the white Samsung pad, and it's significantly more sensitive that the Verizon one. Can you give me a link to which one you've bought.
seanvree said:
So I purchased both the white Samsung Wireless charger and the black Verizon charger.
I
Thanks,
Click to expand...
Click to collapse
What's the Verizon one? Can you provide link?
cbb77 said:
What's the Verizon one? Can you provide link?
Click to expand...
Click to collapse
I can't because it's not sold anymore.
seanvree said:
I also have the white Samsung pad, and it's significantly more sensitive that the Verizon one. Can you give me a link to which one you've bought.
Click to expand...
Click to collapse
It's the only one for the s4 on Samsung.com
chamberc said:
It's the only one for the s4 on Samsung.com
Click to expand...
Click to collapse
Yeah, I have that one and in my opinion it's pretty sensitive where you place the phone.
Thinking about snagging this one:
http://www.amazon.com/Koolpad-Wirel...TF8&colid=3616U4BBPMOR4&coliid=I2QTGCL6YI3QYJ
What Qi-charging options are there for the xperia Z5?
Any chance that Sony will release something similar to WCR14, or are we stuck with fitting generic receivers between the phone and a case?
As I know, z5 doesnt support wirelless charging out of the box
Proday said:
As I know, z5 doesnt support wirelless charging out of the box
Click to expand...
Click to collapse
Yeah, exactly, no support for wireless charging. However, Sony has released cases with built-in wireless charging for earlier models of the Z-line
and I was wondering if anyone knew if they are going to release a similar solution for the Z5 Compact.
At the moment it seems as though the only viable option is to install a qi-receiver bought on ebay or a similar site and pair it with a case.
Not so bad i guess, since it probably is a hell of a lot cheaper and you get to choose whichever case you want.
Awaiting my Z5C now and will update when I have installed a qi solution.
That is impossible becouse that cases before have connection over magnetic charger and z5c dont have it.
Okay, bummer..
I thought they might solve the problem of the missing magnetic port by using the micro-usb connection..
Just wanted to confirm, I purchased a Qi Wireless Receiver that connects over USB - no dice. They don't have the "teeth" that microusb ports have and due to the water proofing the port doesn't turn on.
jonshipman said:
Just wanted to confirm, I purchased a Qi Wireless Receiver that connects over USB - no dice. They don't have the "teeth" that microusb ports have and due to the water proofing the port doesn't turn on.
Click to expand...
Click to collapse
Really?
Shucks.. I just ordered one of those..
Tried various adapters and it doesn't draw enough power to charge. It just vibrates and turns the screen on but doesn't say charging.
Maybe you should try "detect the usb device" option
moazzam.munir said:
Maybe you should try "detect the usb device" option
Click to expand...
Click to collapse
This.
I will be ordering up a high amp one soon to hopefully help me get my phone through the day. I'll report in if it does or doesn't work.
I am using this one
http://www.amazon.de/Universal-Qi-Wireless-Ladegerät-Micro-USB-Android-Handy-Schnittstelle/dp/B00OH12LA0/ref=sr_1_2?s=ce-de&ie=UTF8&qid=1456411436&sr=1-2&keywords=qi+receiver+1000ma#productDetails
in combination with this case
http://www.amazon.de/gp/product/B016D8ZACK?ref_=pe_1365651_54849071
looks perfect and my phone gets from empty to 100% in about 6 hours.
Thorstenk said:
I am using this one
http://www.amazon.de/Universal-Qi-Wireless-Ladegerät-Micro-USB-Android-Handy-Schnittstelle/dp/B00OH12LA0/ref=sr_1_2?s=ce-de&ie=UTF8&qid=1456411436&sr=1-2&keywords=qi+receiver+1000ma#productDetails
in combination with this case
http://www.amazon.de/gp/product/B016D8ZACK?ref_=pe_1365651_54849071
looks perfect and my phone gets from empty to 100% in about 6 hours.
Click to expand...
Click to collapse
Looks nice! what kind of amperage are you able charge with tst receiver?
I'm going to be ordering this one:
https://www.amazon.com/gp/aw/d/B00YGV76LK/ref=ox_sc_act_image_1?ie=UTF8&psc=1&smid=A11ID9O6IRX38
Review show that it's pretty close to 1amp in most cases.
And using this so every time its in my pocket I'll have this in there charging it..
http://www.amazon.com/gp/aw/d/B018T...X236_SY340_FMwebp_QL65&keywords=qi+power+bank
Ampere shows 200-600 mAh (depending of the position)
Its working really good and its cheap, don't get why not all the companies install it in their phones ...
jonshipman said:
Just wanted to confirm, I purchased a Qi Wireless Receiver that connects over USB - no dice. They don't have the "teeth" that microusb ports have and due to the water proofing the port doesn't turn on.
Click to expand...
Click to collapse
Just wanted to post to say that this is wrong. What it needs to work is a connector has the data pins to be connected so that it shows that it's capable of outputting higher than 500mA. I'm using the Zoer receiver that has that and it works fine. Amperage is between 260mA to 770mA depending on the qi charger that I use.
no, not really. This qi definitely works.
nvrd said:
Really?
Shucks.. I just ordered one of those..
Click to expand...
Click to collapse
You just need one with 4 pins instead of the cheaper 2 pin ones. I have one which definitely works. Unfortunately, xdadevelopers doesn't let new users post links for some reason, so I can't help anybody with the link to the one I use. I spent a lot of time working out what to use and finally went into a 'retail store' to test the one I ordered before ordering my own z5 compact. If anybody wants the link to the ebay item, just email at [email protected]. Make sure you choose the 'A type' for the z5 compact. Works a treat. There is a lot of confusion about qi on the z5. Some people are saying that it is because of its waterproof attributes, you can't do it. Not so. This works perfectly and once on, can be used with any QI standard charging mat.
Guy, anyone tried with the quickcharge wireless pad yet? By the way, do we need to have quick charge supported receiver coils in order to use the quick charge charging pad?
qiang85 said:
Guy, anyone tried with the quickcharge wireless pad yet? By the way, do we need to have quick charge supported receiver coils in order to use the quick charge charging pad?
Click to expand...
Click to collapse
I've never seen a quick charger receiver? I gave up on this in favor of quick charging at lunch
For those that have gone down this route a couple of questions please:
1) How has the QI receiver lasted if the phone is submerged? Did it just need rinsing in clean water and drying out or was it screwed?
2) Is there a maximum thickness to the case which I should worry about?
3) What sort of time does it take to charge up?
4) If I'm playing music or video will it charge quicker than I'm draining the battery?
Thanks!
I just got this one:
ASIN=B01E15W2ZA
and it works good with my Xperiy Z5 Compact. It charges with about 600...700 mA, something les than with a normal charger, but absolutely enough for my purpose - modt of the time I just want to recharge over nitght. It goes up to 100 %.
The included power bank feature can also be used via Qi, but probably smarter it to use it with a cable to not waste Your capacity as heat.
By the way: Even NFC works through the receiver!
But still I folded the receiver cable twice to position the receiver on the lower edge of the beackside of the phone. This way I avoid the risk, that NFC sensitivity gets reduced and I can line up the phone better on the charger, because it must lay quite exact on the cross.
i have qi charger for 5c and it works. i order plate fro qi and qi charger from ebay. just this qi sticker must set under some case. another way it is possible to broke it.
I was browsing on Aliexpress.com than I found this Qi wireless charging receiver and charging Pad for Nexus 6P. I don't know if its good or not, or if it has Quick Charging function(probably not) or not. Just want to share it to everyone that's looking for something like this.
Thanks for this. But there is already a thread about this...
http://forum.xda-developers.com/showthread.php?t=3219394
Sent from my Nexus 6P using Tapatalk
According to the page it outputs 5V at 1A, definitely not fast charging... but I really wouldn't expect that on something like this.
I used to have a similar style micro USB QI charger I used in the past and it worked fine on my Micro USB devices.
For me quick charging is more important to me than the convenience of wireless charging. Unless you plan to use wireless charging exclusively I find having to take off and put on the adapter often a hassle.
Still nice find for those that really want wireless charging.
Type-C Qi Wireless Charger UGPine Wireless Receiver Wireless Charging For Xiaomi 4C/4S/5 Meizu Pro5 Pro6 Oneplus Sony Huawei P9
http://s.aliexpress.com/iqQrYFbA
(from AliExpress Android)
Sent from my Nexus 6P using Tapatalk
A-store Qi Wireless Charger Pad + Type-C Wireless Charger Sticker Receiver for Huawei P9/Google Nexus 6P; HTC 10; LG G5/LG Nexus 5X; OnePlus 2 Two; https://www.amazon.com/dp/B01FMJ4UJU/ref=cm_sw_r_other_apa_LqIxxbE0GPCP4
Sent from my Nexus 6P using Tapatalk
Does it work? Did you tested it already? Can you give me a little feedback? Thanks!
Ditto
Sent from my Nexus 6P using Tapatalk
Don't know if this is even possible, but it would be perfect if there was one of these qi receivers with USB C that had a kind of pass through USB C plug, so that you could have the qi receiver plugged into the phone, but still be able to plug in a USB C cable from the wall when you want the faster charger.
bluegizmo83 said:
Don't know if this is even possible, but it would be perfect if there was one of these qi receivers with USB C that had a kind of pass through USB C plug, so that you could have the qi receiver plugged into the phone, but still be able to plug in a USB C cable from the wall when you want the faster charger.
Click to expand...
Click to collapse
That wouldn't be possible without breaking the USB spec, and making it really bulky. These little qi receivers are easy to unplug, so that shouldn't be a big concern.
Pilz said:
That wouldn't be possible without breaking the USB spec, and making it really bulky. These little qi receivers are easy to unplug, so that shouldn't be a big concern.
Click to expand...
Click to collapse
What about if you were to stick the qi receiver to the back of the phone and then put a case on over the phone and receiver, can you still unplug it fairly easily when you want to use the USB wall charger?
bluegizmo83 said:
What about if you were to stick the qi receiver to the back of the phone and then put a case on over the phone and receiver, can you still unplug it fairly easily when you want to use the USB wall charger?
Click to expand...
Click to collapse
That's what I was implying rather than using a pass through. There's still a possibility the receiver will not work if directly touching the phone depending on how it's made, so once it can be confirmed working that should be fine.
Pilz said:
That's what I was implying rather than using a pass through. There's still a possibility the receiver will not work if directly touching the phone depending on how it's made, so once it can be confirmed working that should be fine.
Click to expand...
Click to collapse
Oh ok. I may go ahead and order one and give it a try. I just thought maybe with a case on over it, that the case may pinch the cable of the receiver and not allow you to be able to unplug it from the phones USB port without removing the case first (which would be a pain).
bluegizmo83 said:
Oh ok. I may go ahead and order one and give it a try. I just thought maybe with a case on over it, that the case may pinch the cable of the receiver and not allow you to be able to unplug it from the phones USB port without removing the case first (which would be a pain).
Click to expand...
Click to collapse
I might order one too since I have a plethora of wireless chargers for my S7 Edge. I'm hoping they made it correctly so it can be in direct contact with the phone (I.e. jts shielded correctly)
I have a bunch of chargers as well from my s6. So excited to get this and use them again.
Sent from my Nexus 6P using Tapatalk
OK so got mine today and works as advertised. Tonight will be the first night to test. It's slower that's for sure when it comes to charging. The nub that plugs in isn't too big, which is nice. Takes some getting used to.
If you got time on your hands and have a wireless charge handy all the times then I would recommend this. If you dont have time then stick with usb c charging ad it's faster.
Sent from my Nexus 6P using Tapatalk
Does it heat up at all? Would it be safe under a TPU case? I've ordered one along with a N6P so just waiting for the deliveries now.
Doesn't heat up, at least not that I have observed. I am using a tpu case. The fosmon cases and not an issue at all with charging.
Sent from my Nexus 6P using Tapatalk
I've got my receiver and it looks pretty good. The plug is a bit thicker than I expected, but then it seems very sturdy. Unfortunately I don't have the actual handset yet so still waiting to use it. Hopefully it will slot in nicely behind a Diztronic case.
Pictures with a case around it would be nice
Sent from my Nexus 6P using Tapatalk
CoopZor said:
Pictures with a case around it would be nice
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
Give me a bit and I can post some.
Sent from my Nexus 6P using Tapatalk
I've gotten way too use to wireless charging to get rid of it on the 7 Pro. I previously used a wireless adapter with the Mi Mix that worked perfectly charging at around 1000ma. For some reason the same adapter is only charging at around 70ma-250ma on the 7 pro across multiple chargers. Has nothing to do with the case as the speed is the same with and without the case.
So, I'm looking to buy another adapter. Is anyone using one that works well they can recommend?
Nillkin Type C Wireless Charging... https://www.amazon.com/dp/B01M11UT3V?ref=ppx_pop_mob_ap_share
This is the one I use on a daily basis. Combined with a Choetech charging pad, my 7Pro typically gets north of 500 mAh, and hits 800-1000 regularly.
Note that cables (I use Monoprice) and adapter (Anker qc3) make a difference. Also length of usb-c cables can affect charging, especially through a case. Personally, a 1.5ft cable fits my setup atop my dresser.
reaper000 said:
Nillkin Type C Wireless Charging... https://www.amazon.com/dp/B01M11UT3V?ref=ppx_pop_mob_ap_share
This is the one I use on a daily basis. Combined with a Choetech charging pad, my 7Pro typically gets north of 500 mAh, and hits 800-1000 regularly.
Note that cables (I use Monoprice) and adapter (Anker qc3) make a difference. Also length of usb-c cables can affect charging, especially through a case. Personally, a 1.5ft cable fits my setup atop my dresser.
Click to expand...
Click to collapse
That's the same one I use too. Works well.
reaper000 said:
Nillkin Type C Wireless Charging... https://www.amazon.com/dp/B01M11UT3V?ref=ppx_pop_mob_ap_share
This is the one I use on a daily basis. Combined with a Choetech charging pad, my 7Pro typically gets north of 500 mAh, and hits 800-1000 regularly.
Note that cables (I use Monoprice) and adapter (Anker qc3) make a difference. Also length of usb-c cables can affect charging, especially through a case. Personally, a 1.5ft cable fits my setup atop my dresser.
Click to expand...
Click to collapse
ok good, have that Nillikin coming tomorrow. did you get the short or long version? seems from reading they would recommend the short.
I use android auto alot so need to connect phone to the car daily. Is there a recommendation for a wireless charging option that can also facilitate a magnetic usb type c charger?
hallo dare said:
I use android auto alot so need to connect phone to the car daily. Is there a recommendation for a wireless charging option that can also facilitate a magnetic usb type c charger?
Click to expand...
Click to collapse
I just ordered this: https://www.amazon.com/gp/product/B07QNW32V4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Will see how well it works!
Ogplya said:
I just ordered this: https://www.amazon.com/gp/product/B07QNW32V4/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Will see how well it works!
Click to expand...
Click to collapse
Please let us know how well it works with the OnePlus Warp Charger (my guess is it won't Warp, but am curious how many mAh you get, if you wouldn't mind using Ampere or AccuBattery or something equivalent to report)
Thanks!
---------- Post added at 05:17 AM ---------- Previous post was at 04:28 AM ----------
knives of ice said:
ok good, have that Nillikin coming tomorrow. did you get the short or long version? seems from reading they would recommend the short.
Click to expand...
Click to collapse
Short!
reaper000 said:
Please let us know how well it works with the OnePlus Warp Charger (my guess is it won't Warp, but am curious how many mAh you get, if you wouldn't mind using Ampere or AccuBattery or something equivalent to report)
Thanks!
---------- Post added at 05:17 AM ---------- Previous post was at 04:28 AM ----------
Short!
Click to expand...
Click to collapse
So I tested it out. Wired charging is as fast if not faster than the stock warp charger (was getting up to 5700 mA). Wireless charging is much slower (even with a fast charging wireless charging pad) and is definitely not fast wireless charging like with samsung, but i'm still averaging about like 600-800 mA, so probably like 17%/hr. I'm pretty satisfied with it. Only problem is if I ever need to use the usb-c port for real usb c items like headphone adapter, still have to remove the receiver.
Ogplya said:
So I tested it out. Wired charging is as fast if not faster than the stock warp charger (was getting up to 5700 mA). Wireless charging is much slower (even with a fast charging wireless charging pad) and is definitely not fast wireless charging like with samsung, but i'm still averaging about like 600-800 mA, so probably like 17%/hr. I'm pretty satisfied with it. Only problem is if I ever need to use the usb-c port for real usb c items like headphone adapter, still have to remove the receiver.
Click to expand...
Click to collapse
how far does this one you bought come out the bottom? thats the one thing i didn't like from the pics people were posting
knives of ice said:
how far does this one you bought come out the bottom? thats the one thing i didn't like from the pics people were posting
Click to expand...
Click to collapse
About the height of the bottom bezel
Lol neuter your phone charging! So you charge at almost 3x slower then your cable charger for what reason?
Eric214 said:
Lol neuter your phone charging! So you charge at almost 3x slower then your cable charger for what reason?
Click to expand...
Click to collapse
Decreased mechanical wear and tear.
The only thing more likely than failure of the USB port is failure of the power button... What do they have in common? Both parts are subject to degradation from repeated physical interaction.
I have a friend who repairs phones -- besides shattered screen replacement, power buttons and USB ports are what he most commonly fixes.
reaper000 said:
Decreased mechanical wear and tear.
The only thing more likely than failure of the USB port is failure of the power button... What do they have in common? Both parts are subject to degradation from repeated physical interaction.
I have a friend who repairs phones -- besides shattered screen replacement, power buttons and USB ports are what he most commonly fixes.
Click to expand...
Click to collapse
Never had a bad port nor a power button go bad and I've had a lot of phones. USB C ports don't wear out, they get damaged. Learn to keep your things nice and take care of them and they will last. The power button, never an issue but in the last 3 years you don't even need to use it much anyway with double tap to sleep and wake. Just fishing for reasons
Eric214 said:
Never had a bad port nor a power button go bad and I've had a lot of phones. USB C ports don't wear out, they get damaged. Learn to keep your things nice and take care of them and they will last. The power button, never an issue but in the last 3 years you don't even need to use it much anyway with double tap to sleep and wake. Just fishing for reasons
Click to expand...
Click to collapse
No worries! I've used custom kernels that support DT2W/S or quick settings tiles to proxy the button for years as well. You're absolutely right -- don't abuse your phone and you can use it for years... :angel: